Loading
Loading…
Loading…
Tender Value
₹7.8 Cr
EMD Value
₹15.6 L
Closing Date
27 Aug 2026, 3:00 pm3d left
PARVEEN Gothwal
Executive Engineer Palwal
Banchari- Construction of Synthetic Track at Village Banchari, Block Hodal, District Palwal(CM-27501)
2026_HRY_538237_1
2026DE42ACEB 976C 4032 9E00 096C8D5A8F29709DEV
Open Tender
Civil Works
Works
420 days
PALWAL
Banchari- Construction of Synthetic Track at Village Banchari, Block Hodal, District Palwal(CM-27501)
4 documents required · 4 mandatory
₹20,000
₹15.6 L
Yes
Suprintending Engineer Circle Faridabad
27 Aug 2026
3 Aug 2026
31 Aug 2026
3 Aug 2026
27 Aug 2026
3 Aug 2026
3 Aug 2026 - 27 Aug 2026
11 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 2 | NS Itmes | - | - | - | - |
| 3 | Preparation and rectification of minor undulation in bituminous surface level before laying of synthetic track with 4m straight edge and threw to make proper level by synthetic material or deep patch material as per requirement and specification of latest world Athletic and as per direction of EIC. | 2,000 | Sqm | - | - |
| 4 | `Providing and laying Synthetic Athletics Track FULL PUR SYSTEM with FULL EPDM only ( without re-cycled rubber ) which should comply with Environmental compatibility of VOC (Volatile Organic Compound) content as per DIN-V-18035-6. including IAAF Standard markings on the surface all complete as per requirements/specifications laid down by IAAF class -II certification and as per direction of the Engineer-in-charge. The synthetic Track should conform to the following specifications
Property Requirement Test norm
Tensile strength 0.5N/mm2 0.3N/mm2 IAAFDINV18035-6
Elongation at break )40°% IAAF DINV18035-6
Force reduction 35-50% IAAF(23°C) plus
Vertical deformation 0.6-2.5mm IAAF(23°C)
Standard deformation 0.6-1.8mm
(at0-40°C) DINV18035-6
Thickness )15mm DINV18035-6
Relative abrasion )1.0 DINV18035-6
Friction(sliding coefficient) )0.5 (1.1 DINV18035-6
Spike resistance Class1 DINV18035-6
Remaining indentation (1.0mm DINV18035-6
Ageing Pass DINV18035-6
Environmental requirements Limit values for
DOC, EOX, Heavy metals,
smell DINV18035-6
``Providing and laying Synthetic Athletics Track FULL PUR SYSTEM with FULL EPDM only ( without re-cycled rubber ) which should comply with Environmental compatibility of VOC (Volatile Organic Compound) content as per DIN-V-18035-6. including IAAF Standard markings on the surface all complete as per requirements/specifications laid down by IAAF class -II certification and as per direction of the Engineer-in-charge. The synthetic Track should conform to the following specifications
Property Requirement Test norm
Tensile strength 0.5N/mm2 0.3N/mm2 IAAFDINV18035-6
Elongation at break )40°% IAAF DINV18035-6
Force reduction 35-50% IAAF(23°C) plus
Vertical deformation 0.6-2.5mm IAAF(23°C)
Standard deformation 0.6-1.8mm
(at0-40°C) DINV18035-6
Thickness )15mm DINV18035-6
Relative abrasion )1.0 DINV18035-6
Friction(sliding coefficient) )0.5 (1.1 DINV18035-6
Spike resistance Class1 DINV18035-6
Remaining indentation (1.0mm DINV18035-6
Ageing Pass DINV18035-6
Environmental requirements Limit values for
DOC, EOX, Heavy metals,
smell DINV18035-6 | 7,022.7 | Sqm | - | - |
| 5 | `Providing and laying Synthetic Athletics Track FULL PUR SYSTEM with FULL EPDM only ( without re-cycled rubber ) which should comply with Environmental compatibility of VOC (Volatile Organic Compound) content as per DIN-V-18035-6. including IAAF Standard markings on the surface all complete as per requirements/specifications laid down by IAAF class -II certification and as per direction of the Engineer-in-charge. The synthetic Track should conform to the following specifications
Property Requirement Test norm
Tensile strength 0.5N/mm2 0.3N/mm2 IAAFDINV18035-6
Elongation at break )40°% IAAF DINV18035-6
Force reduction 35-50% IAAF(23°C) plus
Vertical deformation 0.6-2.5mm IAAF(23°C)
Standard deformation 0.6-1.8mm
(at0-40°C) DINV18035-6
Thickness )15mm DINV18035-6
Relative abrasion )1.0 DINV18035-6
Friction(sliding coefficient) )0.5 (1.1 DINV18035-6
Spike resistance Class1 DINV18035-6
Remaining indentation (1.0mm DINV18035-6
Ageing Pass DINV18035-6
Environmental requirements Limit values for
DOC, EOX, Heavy metals,
smell DINV18035-6
`
HIGH STRESS AREA WITH MINIMUM 20MM THICKNESS | 211 | Sqm | - | - |
| 6 | `Providing and laying Synthetic Athletics Track FULL PUR SYSTEM with FULL EPDM only ( without re-cycled rubber ) which should comply with Environmental compatibility of VOC (Volatile Organic Compound) content as per DIN-V-18035-6. including IAAF Standard markings on the surface all complete as per requirements/specifications laid down by IAAF class -II certification and as per direction of the Engineer-in-charge. The synthetic Track should conform to the following specifications
Property Requirement Test norm
Tensile strength 0.5N/mm2 0.3N/mm2 IAAFDINV18035-6
Elongation at break )40°% IAAF DINV18035-6
Force reduction 35-50% IAAF(23°C) plus
Vertical deformation 0.6-2.5mm IAAF(23°C)
Standard deformation 0.6-1.8mm
(at0-40°C) DINV18035-6
Thickness )15mm DINV18035-6
Relative abrasion )1.0 DINV18035-6
Friction(sliding coefficient) )0.5 (1.1 DINV18035-6
Spike resistance Class1 DINV18035-6
Remaining indentation (1.0mm DINV18035-6
Ageing Pass DINV18035-6
Environmental requirements Limit values for
DOC, EOX, Heavy metals,
smell DINV18035-6
`HIGH STRESS AREA WITH A MINIMUM THICHNESS OF 25 MM OF FINISHED TRACK SURFACE
WATER JUMP PIT INSIDE | 13.4 | Sqm | - | - |
| 7 | Proviidng and applying UV protective PU spray coat of WA approved product Manufacture for required colour over top layer as per direction of EIC | 7,024.04 | Sqm | - | - |
| 8 | Construction of Steeple chase water jump pit inside North D portion as per ``WA specification`` and complete as per direction of Engineer-in-Charge. | 1 | Nos. | - | - |
| 9 | Supply of sports equipment material for conducting various event
POLE VAULT COVER WITH BOX | 4 | Nos. | - | - |
| 10 | Supply of sports equipment material for conducting various event
TAKE OFF BOARD SYSTEM FOR LJ/TJ | 12 | Nos. | - | - |
| 11 | (c) Hammer cum Discuss throwing RING with cage | 1 | Nos. | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.76 MB
BOQ_617420.xls
BOQ • 0.39 MB
AD0172108.pdf
Additional Documents • 0.18 MB
OT0172108.pdf
Other Document • 0.39 MB
COMMITTEENEW.pdf
PDF • 0.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].