1. MPCB, Current rating: 16 A, Thermal release range: 10-16 A, Class: 10, Breaking Capacity: 10kA, Pole: 3 P, Voltage Rating: 415 V AC conforming to RDSO spec. no. RDSO/PE/SPEC/AC/0184 %u2013 2015 (Rev. 0) as per Drg.No. Nil specn: RDSO spec. no. RDSO/PE/SPEC/AC/0184 %u2013 2015 (Rev. 0) 2. Brushless DC (BLDC) Motor Ceiling Fan, ISI marked, Sweep size: 1200 mm, Minimum Air delivery-210 Cubic Meter/Min, total harmonic distortion- 8% [max], Rated Voltage: 230 V, 50HZ Single phase AC, Speed control with electronic regulator (step type with minimum 5 running positions), Blade thickness (Min): 1.1mm, Blade material : Aluminum, Bearing : Double ball bearings, Down rod size (without shackle) : 300mm, Shank & Shackle thickness (Min) : 2mm, canopy : 2 nos., colour standard: white, BEE rating : 5 star (as per BEE%u2019s amendment to Schedule 8 for Ceiling fans Rev.2 dt. 08.08.2019), Rated power- 28 watt [max], Warranty [Min] 2 years. Conforming to- (i) IS: 374/2019 (ii)IS:302 (Part 2/Sec 80) - For safety requirement. (iii)IS:14700 (Part 3/Sec2) for THD (iv)The firm has to submit type test report from Government accredited test labs like NABL/CPRI etc. along with the offer. (v) Routine test Certificates has to be submitted along with supply. (vi) Acceptance test shall be carried out by

AS PER CAPACITY CUM CAPABILITY AS PER 2.2 OF UNIFIED BIDDING DOCUMENT ATTACHED.

Land Border Criterion: This tender is governed by RB L/No- 2020/RS(G)/779/2 Dated-06.08.2020

There shall be no Exemption from submission of EMD for any tender or by any tenderer, except the following: (a) Micro and Small Enterprises (MSEs) registered for the tendered item. (b) Other Railways and Government Departments. (c) Indian Ordinance Factories. (d) PSUs owned by Ministry of Railways and PSUs for the group of items that are manufactured by them. (e) Vendors registered with Railways for the trade group of the item tendered. (f) Vendors appearing on the approved vendor lists of RDSO/PUs/CORE, for those specific items for which they are on approved list, subject to approval status being valid on the date of tender closing. (g) Vendors registeded with Railways for supply of medicine, medical equipments and consumables shall be exempted from submission of EMD for these items. (h) In tenders issued against PAC, OEM in whose favour PAC has been issued shall be exempted from submitting EMD, (i)KVIC and ACASH shall be exempted from EMD for items supplied by them. EMD Amount(rounded off to nearest higher Rs. 10(ten) @ 2% of estimated value of the tender subject to Max. Rs, 20 lakh. (i)All vendors, exempted from submitting EMD, as per para above, irrespective of type of tender, i.e., single, limited or open, shall be required to sign a bid securing declaration as per Annexure - B to this instruction. (ii) There shall be no exemption to such bidders from submitting EMD and SD for all tenders published during the period of time they are so disqualified as per the declaration signed by them. (iii) This para shall not be applicable for Govt. Departments/Ordinance factories/ Other Railways/ Railway PSUs/ KVIC/ACASH and matter shall be taken up with them departmentally/ administratively. Offers submitted without EMD shall be summarily rejected.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

Technical/Commercial should be mentioned under deviation with proper remarks. Any deviations apart from the deviation remarks will not be considered as uploaded by Bidders as PDF etc.as part of their Bid/offer.