Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.1 LAccepted-AOC NO 228 3RD CROSS HRBR 3RD BLOCK NEAR JALVAYU VIHAR WEST GATE BANGALORE 560043 | BENGALURU URBAN | KARNATAKA | 560043 | L1 | Accepted-AOC Lowest bid value | |
| 2 | L2₹34.1 L+₹3.5 L (11.6%)Rejected-AOC NO 64 5TH C MAIN 7TH CROSS AGROGYAPPA LAYOUT KAMMANAHALLI NEAR RAJ KUMAR PARK BANGALORE 560084 | BENGALURU URBAN | KARNATAKA | 560084 | L2 | Rejected-AOC Higher bid value | |
| 3 | L3₹35.7 L+₹5.2 L (17.0%)Rejected-AOC NO 45 5TH CROSS MALLAPPA LAYOUT BABUSAPALYA KALYAN NAGAR BANGALORE 560043 | BENGALURU URBAN | KARNATAKA | 560043 | L3 | Rejected-AOC Higher bid value | |
| 4 | L4₹36.2 L+₹5.6 L (18.5%)Rejected-AOC SR NO 281 3 7 ANAND NAGAR NEAR DHANORI JAKAT NAKA LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L4 | Rejected-AOC Higher bid value | |
| 5 | L5₹39.9 L+₹9.3 L (30.5%)Rejected-AOC | L5 | Rejected-AOC Higher bid value |
Tender Value
Refer Docs
EMD Value
₹92,000
Closing Date
26 Jun 2025, 6:00 pmClosed
GE (AF) BANGALORE
GE (AF) BANGALORE, HQ TC AIR FORCE , BANGALORE - 560006
REPAIR/MAINTENANCE TO COMPOUND WALL, PERIMETER WALL, CATTLE FENCING, CHAIN LINK FENCING, BARBED WIRE, CONCERTINA COILS AND OTHER B/R WORKS IN HOSPITAL COMPLEX AT CHAFB
2025_MES_710722_1
8354/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BANGALORE
AS PER NIT
5 documents required · 5 mandatory
₹500
GE (AF) BANGALORE
₹92,000
16 Jul 2025
28 May 2025
28 Jun 2025
28 May 2025
26 Jun 2025
12 Jun 2025
29 May 2025 - 4 Jun 2025
Amount
Demolition of Brick work or stone/ boulder/block masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.
M&L stone walling of square rubbled masonry, regular coursed (Bangalore type) well bounded and solidity hearted built in cement mortar 1:6 complete all as specified and as directed.
All as per item No. 2.00 above but except stones complete.
Raking out joints/pointing to block in course masonry, or concrete block walling in cement mortar complete all as specified and directed.
M&L for keyed pointing to random or polygonal rubble, uncoursed or brought upto course in cement mortar 1:3 complete all as specified and as directed.
M&L for Precast cement concrete block masonry with solid blocks, exc 10cm in width and setting in mortar type C1 using 1:3:6 set in cement mortar 1:6 complete all as specified and directed.
All as per item No. 6.00 above but except block or slabs.
Taking down cement plaster on brick or stone walls etc including racking out joints,hacking for key, scrubbing down with water etc complete all as specified and as directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:4 finished even and smooth without using extra cement complete all as specified and as directed.
M&L for preparation of new undecorated surface of walls and applying two coats of cement base paint over a coat of primer through mechanical means complete all as specified and as directed.
Dismantling chain link fencing wire mesh, any type description and size complete all as specified and as directed.
Dismantling structural steel work of any description and any position including doors, gate but excluding framed trusses complete all as specified and directed.
Excavation in post holes each n exc 0.50 cum in any type of soil, getting out, returning filling in and ramming earth or broken rubble mixed with earth around , in layers not exceeding 25 cm ,watering and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed
M&L for cement concrete in foundation PCC 1:4:8 type D2 using 40mm graded stone agg as in foundation filling or mass concrete for fencing post complete all as specified and directed
S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc ; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
S&F Joist channel,angle or Tee sections (Fe-410-W (Gde-E-250) quality A) fixed independently without conecting plates etc complete all as specified and directed.
S&F Framed work such as grills, grating, etc with ends of bars shouldered and/or rivted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conformig to Fe.290. Gde-E-165 complete all as specified and directed
M&L for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer complete all as specified and as directed.
M&L for preparation of untreated new steel surfaces of any description n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint ( 1st grade quality ) over a coat of red oxide primer complete all as specified and as directed.
Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed
S&F in repairs galvanised 2 strand barbed wire 2.24mm dia of wire and 2 mm dia of barbed at 75mm spacing and straining and fixing to any type of strandre nails straining bolts, including securing or tying at crossing with and provn of galvanised MS wire staples or steel pins etc complete all as specified and directed
Restringing and resecuring of existing barbed wire including making good staples added fixed in repairs complete all as specified and directed
S&F in repair concertina coils 610mm diameter wire of short profile with HTGS spring corewire of diameter 2.59mm pitch between the barb 24.5mm. Tape will be hot dip galvanised upto 20 microns. Weight of each coil should be 7.5 to 8kg tape to be 0.5mm thick. Tensile strength will be 16000N/mmsqr (minimum) number of spiral turns per coil is before crimping is 18mm minimum including dovetail clips @ 5 clips per 2 spiral turns approx 125 clips per coil complete all as specified and as directed.
Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.
M&L for Precast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in cover slabs and the like, set in cement mortar 1:6 with plain fair faces complete with joints to match complete all as specified and directed
S&F High strength, deformed steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than 0.90mm dia all as specified.
S&F High strength, deformed steel TMT 6mm to 8mm mm dia, cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than 0.90mm dia all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.
M&L for providing cement concrete type B1,1:2:4 (20 mm graded aggregate) as in copings including formwork complete all as specified and as directed.
M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and fair complete all as specified and as directed.
M&L for 75 mm thick Plain Cement concrete type D2 1:4:8 (40mm graded aggregate) as in sub bases,floors, pavings complete all as specified and as directed.
M&L for 100 mm thick Plain Cement concrete type B2 1:2:4 (40mm graded aggregate) as in floors, pavings complete all as specified and as directed.
M&L for 60mm thick coloured rubberised machine pressed interlocking pattern paver block any shape and size conforming to IS 15658-2006 of M-35 Grade laid over and including 40-50mm thick M sand cushioning layer and grouted with dry sand complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.
S&F Non Skid (rough) endura tiles of High thickness 10/12 mm thick of approved size and shape and colour with minimum flexural strength of 38 N/mm2 including dismantling floor, hearth or wall tiling incl cement mortar bedding ( but not backing) and rubbish off the premisies complete all as specified and directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations. (Make: Johnson Endura or techno-commercially equivalent in Somany Dura stone,Wavy Ivory & Wavy Terracotta )
M&L for coloured rubberised Chequered cement concrete tiles of size 300mm x 300mm x 25 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed
Dismantling of Asbestos cement (corrugated,semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed
S&F Prepainted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F Prepainted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed
M&L Preparation of plastered or unplastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of cement base paint through mechanical means , including necessary scaffolding upto 6th storey complete all as specified and as directed.
M&L Preparation of plastered or un plastered old decorated surfaces of walls by brooming down or with steel wire brushing, scraping down smoke soot’s, moulds , moss & efflorescent salts & treating oily & greasy spots & filling holes & cracks with suitable material like white cement or Plaster of Paris and applying one coat of white wash including necessary scaffolding upto 6th storey complete all as specified and as directed.
M&L Preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint including necessary scaffolding up to 6th storey complete all as specified and as directed.
Demilition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.
M&L 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
M&L for 20mm Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick backing in cement mortar 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.
Removing demolished material i.e building material concrete debris of any type etc to a distance of 09 KM beyond and up to 10 KM out of premises of metropolition area including loading, unloading by manually or by mechanical means (JCB and to be transported through trolly or tipper and staking at the destination as and when directed by Engr-In-Charge during execution complete all as specified and as directed.
K V RAJANNA (BID ID -3329404)
M/S Suresh Raju (BID ID -3325936)
VP DEVELOPERS AND CONTRACTOR (BID ID -3338288)
SHREE HARI BUILDERS (BID ID -3338124)
GKR and CO (BID ID -3329123)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .