Maintenance Work of Communitty Hall At jatavpura Sath bhai ki goth Park and Other maintenance Work in Ward No. 47 Zone No. 20 file No. 318/25X3/3

Dismantling old plaster or skirting upto15mmthickness, raking out joints and cleaning thesurfaceforplasteruptotwofloor level includingdisposal of rubbishwithin50meters leadand including scaffolding etc.

UAD SOR 2021 Vol-2, I.No-4.1.7/ P. No- 32 P/L in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. Cement concrete grade M-7.5 (Nominal Mix) with 40 mm maximum size of stone aggregate. drain

UAD SOR 2021 Vol-2, I.No-5.11.4/ P. No- 47 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP :34) etc. complete. TMT bars..

UADSOR 2021Vol-2,I.No-19.1.1/P.No-208 Centering and shuttering including strutting, propping etc.and removal of form (A)for Foundations, footings, bases of columns, etc. For mass concrete.

UAD SOR 2021 Vol-2, I.No-6.3.2/ P. No-56 Brick work with chimeny brick of class designation 40 in superstructure above plinth level upto floor 2 level including the cost of scaffolding in :Cement mortar 1:6(1 cement : 6 coarse sand)

UAD SOR 2021 Vol-2, I.No-2.18.1/ P. No-19 Supplying and filling in plinth under floors including,watering, ramming consolidating and dressing complete. Moorum/Hard copra

UAD SOR 2021 Vol-2, I.No-5.3/ P. No-46 R.C.C. work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor two level excluding the cost of centering, shuttering and reinforcement with Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

UADSOR 2021 Vol-2,I.No-10.15.1/P.No-118 Steel work in built up M.S. tubular section (round, square or rectangular Hollow tube etc.) trusses/frame work etc./ railing work etc. i/c cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete.Hot finished welded type tubes.

UADSOR2021Vol-2,I.No-10.14.1.2/P.No-118 Steel work welded in built up sections/ framed work including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

UAD SOR 2021 Vol-2, I.No-11.5/ P. No-130 62 mm thick cement concrete flooring with concrete hardener topping under layer 50 mm thick cement concrete grade M-15 (Nominal Mix with 20mm maximum size of stone aggregate) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume. Hardening compound is mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

UAD SOR 2021 Vol-2, I.No-12.23/ P. No-147 Providing gola 75x75 mm in cement concrete M-15 with aggregate 10mm and down gauge including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase.

UAD SOR 2021 Vol-2, I.No-9.116/P.No-108 P/F factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S.square tube of 19gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S.screws of 65/100mm size complete as per manufacturers specification and direction of ngineer-in-Charge.

UADSOR 2021 Vol-2, I.No-9.121/P.No-110 P/F 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as styles and rails. Joints are made using solvent adhesive and GI 'C'sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x20mm ) stiffener frame insert & telescopic polymeric 'L' corners.The panel shall be filled with 3mm thick high -pressure compact laminate as per manufacturer's specifications and direction of Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C. and bathroom door shutter).

UAD SOR 2021 Vol-2, I.No-9.93.8/P.No-103 P/F ISI marked aluminium butt hinges ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

UAD SOR 2021 Vol-2, I.No-9.98.2/P.No-104 P/F aluminium handles ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour or shade with necessary screws etc. complete :

UAD SOR 2021 Vol-2, I.No-9.95.4/P.No-104 P/F aluminium tower bolts ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868 )transparent or dyed to required colour or shade with necessary screws etc. complete :

UAD SOR 2021 Vol-2, I.No-13.65/P.No-166 Lettering with black Japan paint of approved brand and manufacture

UAD SOR 2021 Vol-2,I.No-13.1.2/ P.No-160 12mm cement plaster of mix : 1:6 (1cement: 6 fine sand)

UAD SOR 2021Vol-2,I.No-10.3/P.No-116 P/F in position collapsible steel shutters (Channel Gate) with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6 mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rates includes recess cutting in floor and making good the same where ever required.

UAD SOR 2021 Vol-2, I.No-23.61/P.No-247 P/F unplasticised PVC soil and waste pipes conforming to IS: 13592 Type B including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes for working pressure of 4 kg/sqcm.75mm diameter(minimum wall thickness 3.2mm)

110mm diameter(minimum wall thickness 3.2mm)

UAD SOR 2021 Vol-2,I.No-21.1/P.No-222 P/F CPVC pipes, having thermal stability for hot & cold water supply including all CPVC plane and brass threaded fitting i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement andtesting of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall. 15 mm nominal outer dia .Pipes.

25 mm nominal outer dia .Pipes.

UAD SOR 2021 Vol-2, I.No-11.35/ P. No-135 P/L vitrified floor tiles (without Soluble salt) or printed(with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS : 15622 of approved make in all colours & shades, Ist quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand)including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm as per manufacturer specification

UAD SOR 2021 Vol-2, I.No-11.36/ P. No-135 P/L vitrified floor tiles (without Soluble salt) or printed(with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS : 15622 of approved make in all colours & shades, Ist quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4 (1 cement : 4 sand)including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm as per manufacturer specification

UADSOR2021Vol-2,I.No-11.45.2.1/P.No 137 Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 sand) i/c pointing with white C M 1:2 (1 white cement : 2 marble dust)with an admixture of pigment to match the marble shade: Fine granite dark Black/darkRed/White with self design/pattern/crystals of other colors of glitter.

UAD SOR 2021 Vol-2, I.No11.34/ P. No 135 P/L rectified Glazed Ceramic wall tiles 300x450 mm or more(8mm to 10mm thick) of 1st quality conforming to IS : 15622 of approved make in all colours, laid on 12 mm thick Cement Mortar1:3 (1Cement : 3 Coarse sand) including grauting the joints with white cement and matching pigments etc., complete.

UAD SOR 2021,Vol-1, I.No-17.2.1/P.No-209 Constructing Brick masonry rectangular manhole in cement mortar 1:4 common Burnt Clay Brick or fly ash bricks, of compressive strength not less than 75 Kgf/cm2 RCC top slab Cement Concrete 1:2:4 (Nominal Mix) with stone aggregate 20mm nominal size, 20 cm thick foundation in cement concrete 1:3:6 (Nominal Mix) with stone aggregate 40mm nominal size, inside & outside plastering minimum 12mm thick with cement mortar 1:3 finished with a floating coat of neat cement and making channels in Cement Concrete 1:2:4 (Nominal Mix) with stone aggregate 20mm nominal size including finishing the channel to shape, including providing and fixing footrest, manhole cover and frame etc. complete. (only excavation as per actual shall be paid separately ), Depth of manhole shall be considered as the vertical distance from top of the manhole cover to the outgoing invert of main drain channel. Man hole with above specifications having inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 450x600 mm clear opening

UAD SOR 2021, Vol-2, I.No-13.25/ P. No-162 Providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare the surface even and smooth complete.

UAD SOR 2021 Vol-2, I.No23,65.1/ P. No 248 P/F vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat lid with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend 20mm over flow pipe with specials of standard make and mosquito proof coupling of approved municipal design complete,i/c painting of fittings and brackets, cutting and making good the walls and floors wherever required : White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

UAD SOR 2021 Vol-2, I.No23.18/ P. No -241 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm or 340x410x265mm sizes respectively.

UAD SOR 2021 Vol-2, I.No23,10.1/ P. No 239 Providing and fixing wash basin with C.I. brackets, 15 mm C.P.brass pillar taps, 32 mm C.P. brass waste of standard pattern,including painting of fittings and brackets, cutting and making good thewalls wherever require : 23.10.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

UAD SOR 2021 Vol-2, I.No21.25/ P. No-226 Providing and placing on terrace at all floor polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

UAD SOR 2021 Vol-2, I.No4.1.2/ P. No32 P/L in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level . Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate.

UAD SOR 2021 Vol-2, I.No21.26/ P. No-227 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 - 15 mm nominal bore.

UAD SOR 2021 Vol-2, I.No-13.39/ P. No-163 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work.

UAD SOR 2021 Vol-2, I.No-13.46.3/ P. No-164 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture

UAD SOR 2021 Vol-2, I.No21.29/ P. No-227 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. - 15 mm nominal bore.

UAD SOR 2021 Vol-4,I.No-1.3.6/P.No-18 Circuit Wiring:Wiring for circuit wiring with PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C. conduit(HMS) of ISI marked suitable size including painting etc.as required as per specification.a) 2x2.5 Sq.mm.

b) 4x2.5 Sq.mm.

c) 6x2.5 Sq.mm.

d) 8x2.5 Sq.mm.

UADSOR2021,Vol-4,I.No-1.4.1/P.No-18 WIRING IN CONCEALED RIGID PVC CONDUIT (HEAVY DUTY) SYSTEM WITH MODULER ACCESSORIES Point wiring including metallic switch box, sheet, switches, sockets, lamp holders/ceiling roses etc with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in concealed rigid P.V.C.conduit (HMS) ISI Marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit including painting etc. as required as per specification for :- Light Point/Fan Points.(a) short point

(b) Medium point

(c) Long point

3 Pin 6 Amp socket outlet on Separate Board (a) short point

(b) Medium point

(c) Long point

UAD SOR 2021 Vol-4,I.No-8.8/P.No -42 Supplying of approved make, powder coated Vertical TPN MCB DB Metal Double Door with MCCB100ATP10kA as incomer and space for SP/TPMCBs as outgoing (withoutMCBs) inclusive of busbar & connections etc. without MCB:4 way with MCCB

UAD SOR 2021 Vol-4,I.No-9.6/P.No -48 Supplying and fixing of multi core round HRFR/FR PVC insulated copper(flexible) conductor & PVC sheathed cables 1100 Volts as per IS:694-1990 of approved make.(40/.0076) Three core

UAD SOR 2021 Vol-4,I.No-9.23/P.No-50 Supplying,Fixing and Testing of Compact Flourescent Lamp (CFL) with inbuil telectronic ballast ISI marked of approved make as required as per specification :-20 Watt

UAD SOR 2021, Vol-4, I.No-9.29/ P. No-51 Suppling and fixing of approved make step type electronic Fan regulator including connection etc. as required on existing board

UAD SOR 2021, Vol-4, I.No-9.32/ P. No-51 Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete as required confirming to IS :374/1979 with upto date ammendments. Ceiling Fan (Energy Saver 50 W)-1200 mm Sweep

UAD SOR 2021 Vol-4,I.No-19.1.2/P.No-95 Supply and fixing of LED tube rod comprising of LED tube with non integral/integral driver 6500K color temp having 40000 burning hrs life with minimum@L70,system lumen output should be minimum with efficacy> 80lm /W.LED driver PF0.95&THD<20%. The colour rendering index of LED light should be more than 70. Submission LM 8008 Form LED Source Manufacturer & LM79-08/IS 16106 from NAB Lapproved lab.Manufacturer mandatoryi /cconnection wire, testingetc.to complete the job.2 Yrs Guarantee certificate from manufacturer

3D paint oil based ACE asian paint colour with two and more coats for preperation of base with base colour.

Please Enable Macros to View BoQ information