REPAIR MAINT TO JOINERY PLASTERING FLOORING PLUMBING SANITARY FITTINGS AND OTHER MISC WORK IN JCO ORS MD ACCN AT MALCOME LINEUNDER GE MIS MHOW

Amount

Taking down of chowkat or frame area not exceeding 1.5 Sqm each with shutter (without taking off shutters from frames) complete all as specified and directed.

All as per item No 1 above but area exc 1.5 Sqm and not exc. 4.0 Sqm each complete all as specified and directed.

Taking down shutters exc 1.00 sqm but n.exc 2.00 Sqm each complete all as specified and directed.

Taking down shutter of any description n exc. 1 Sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each and refixing in the same opening after repair work complete all as specified and directed.

Taking down aluminium glazed shutters of any description for repairing and refixing in the same opening complete all as specified and directed. Note : New materials replaced shall be measured and paid separately.

S&F of Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F of Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with MS square tube,edges will be paited to match with prelam sheet supplying & fixing in opening as per specification and drawings including all fixtures shown on drawings complete all as specified and directed.

S & F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; stile &rails having one side feathered edge and on other side 10mm 90^0 bent edge,Paneling of prelam PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.given SSR 2010 complete all as specified and directed.

S & F of 35mm thick 2nd class HW Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F of 30 mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F of second class hard wood glazed skelten shutter, 35mm thick, divided into squres plain chamfered open rebated and prepared to received glass guaze etc, edges of framing plain chamered or rounded fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.

S & F of secomd class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (with sash bar) edges divided into squares, with plain chamfered or rounded , mitred and rebated sash bars of any numbers ,beads, for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats, complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S & F of second class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

M&L for Cutting holes in brick/block walls in cement mortar for inserting hold fasts and making good dismantled portion in CM (1:3) or PCC (1:2:4) Type B-1 using 20mm graded stone aggregate as required exc half brick n.exc one brick complete all as specified and directed.

S & F of mild steel bands, straps, support or stays for rainwater ventilating pipes including bolts if required, hook and eye, Hold fasts wall ties hooks for hanging fans, plain angle etc complete all as specified and directed.

S&F of aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section complete all as specified and directed.

S&F in repairs of aluminium alloy anodised sliding door bolt 300 mm long with hook and staple(bolt type) and fixing clip of sheet coat or extruded section and fixing bolt and sliding bolts of extruded section complete all as specified and directed.

S & F of aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S & F in repairs of aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

S & F of aluminum anodised alloy handle 150 mm cast type complete all as specified and directed.

S & F in repairs of aluminum anodised alloy handle 150 mm cast type complete all as specified and directed.

S & F of stainless steel butt hinges 100 mm long complete all as specified and directed.

S&F of Butt hinges, medium weight,cold rolled mild steel, 100mm size complete all as specified and directed.

S&F of Butt hinges, medium weight,cold rolled mild steel, 75mm size complete all as specified and directed.

S&F in repairs of Butt hinges, medium weight,cold rolled mild steel, 100mm size complete all as specified and directed.

S&F of Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm complete all as specified and directed.

S&F in repairs of Continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flaps (When open) 30 mm complete all as specified and directed.

Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Hacking out old broken glass ( any thickness ) size or description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F of 4mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.5sqm in each panes complete all as specified and directed.

All as per item No. 31 above but for figured glass pin headed type complete all as specified and directed.

S&F of stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and directed.

S&F in repairs of stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F of mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete all as specified and directed.

S&F in repairs of mild steel 300mm ordinary rat tail rod springs including roller and roller plate complete all as specified and directed.

S & F in repairs of 150mm floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed.

M&L for preparation of NEW wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel over coat of pink primer complete all as specified and directed.

M&L for preparation of new steel & iron surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of primer complete all as specified and directed.

M&L in repairs of 12mm thick Prelaminated particle board, Exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.

M&L in repairs of 18/19mm thick Prelaminated particle board, Exterior grade,prelaminated one side with decorative choice lamination &other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed.

S&Fof 40mm dia, cupboard knobs with nut, screw & washer of brass, polished complete all as specified and directed.

S&F of Hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws 100mm size complete all as specified and directed.

S&F in repairs of Hasp & staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate with screws 100mm size complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified and directed.

M & L for rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified.

M & L for rendering 15mm thick in CM (1:4) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement ,mixing with liquid WPC complete all as specified and directed. Note :- Liquid Water proofing compound shall be measure and paid separately

M&L for rendering 5mm thick on concrete surfaces in CM (1:3) finished on even and smooth without using extra cement as in ceiling, Chajja etc.complete all as specified and directed.

M & L for Preparation of newly plastered surfaces of walls and apply two coats of oil bound distemper over a coat of primer white or tinted complete all as specified and directed.

M&L for preparation of new surface of wall and applying three coat of white wash, complete all as specified and as directed by Engineer-in-Charge

M&L for applying three coats of white wash on new surface of Ceiling,chajja including preparation of surface complete all as specified and directed.

M&L for preparation of new plastered surface and apply two coat of exterior weather proof water base emulsion paint white/coloured over a coat of primer complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old decorated surfaces of wall by washing rubbing down and stopping of distempered surfaces and apply one coats of oil bound distemper complete all as specified and directed.

M & L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and trading oil and greasy spots from plastered or unplastered surfaces including cornices, pilasters etc and apply one coat of white wash on wall complete all as specified and directed.

Preparation of old wood or wood based surfaces of any description exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Supply only Liquid Water proofing compound PIDIPROOF LW+ of Dr FIXIT or equivalent as approved complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed.

M & L for Non Skid coloured Ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors over and including 15mm thick screed in CM (1:6) , set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the colour of tiles complete all as specified and as directed.

M&L for Coloured joint free Non Skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including15mm thick screed in CM(1:6) complete all as specified and directed.

M&L for glazed ceramic coloured tiles (300mm x 200mm) size 6-7mm thick in dados or skirting over and including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles complete all as specified and as directed.

M&L for glazed ceramic coloured wall tiles (textured and design as required) in vertical surface as in skirting/dados (450X300) mm X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM (1:4) complete all as specified and as directed.

Dismantling old laid bedded and pointed in any mortar Stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

M & L for 20 -25 mm thick kota stone, machin cut kota stone slab flooring mirror polished over and including15mm cement screed base laid in CM (1:6) , and jointed in neat cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M & L for Granite (of any type) 18-20mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white CM (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm screed bed in CM (1:4) complete all as specified and directed.

M & L for chequered cement concrete tiles (glossy finish) (40 cm x 40 cm) x 25 mm thick set ,jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size & colour confirming to IS 15658-2006 with grey cement and pigment complete all as specified and as directed.

M&L for stone dust 25 cm thick under floors or in foundations including watering and consolidation spreading and levelling in layers complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as steps cooking platform and other similar situations complete all as specified and as directed.

Taking down steel tubing 15mm bore and connections complete all as specified and directed by Engineer - in – Charge.

Taking down steel tubing 20mm bore and connection complete all as specified and directed by Engineer - in - Charge.

S & F of GI tubing 15mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

S & F of GI tubing 20 mm Bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and as directed.

Dismantling water tanks and removing to store of capacity exc 250 & n exc 500 ltr complete all as specified & directed.

S & F of Rotational moulded polyethylene water storage tanks (in double layers) of capacity of 500 liters (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as specified & directed.

S & F of 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified & directed.

S & F in repairs of 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete all as specified & directed.

S & F in repair of vitreous china squatting Pan “Orissa” Pattern, of size (580mm x 440mm) white colour with integral foot rests (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete all as specified and directed.

S&F in repair of Vitreous China wash down water closet pan (pedestal pattern), white colour (excluding fixing bolts, flushing cistern & flush pipe) incl Plastic water closet seat, white colour, closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and as directed.

S&F in repair of wash hand basins, white colour,vitreous china,of size (550x400)mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of waste pipe,waste coupling etc complete all as specified and directed.

S&F in repairs of 32mm dia PVC waste pipe fixed to WHB,sink,Urinal complete all as specified and directed.

S&F of 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed.

S&F in repair of 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nuts complete all as specified and directed.

S & F in repairs of 10 ltrs capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, PVC Flush pipe , pull or push type including brackets complete all as specified and directed.

S & F in repair of CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repair of Bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs of PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

S & F in repairs of CP fancy type stop valves ,cast copper alloy concealed type , screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

S & F in repairs of Angle Stop valves one way, brass chromium plated, fancy type, fixed to iron pipe or for unions 15mm bore complete all as specified and directed.

S&F in repair of gun metal gate valves 15 mm with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S & F in repairs of CP Brass Fancy type shower rose 125mm dia with shower arm 30mm long of approved quality complete all as specified and directed.

S & F in repairs of over head tank cover of 500-1000ltr capacity complete all as specified and directed.

S & F in repair of stainless steel sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size (410mm x 330mm x 160mm) complete all as specified and directed.

S&F in repairs of stainless steel plate rack for kitchen 1mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as spd and directed by Engr-in-Charge. Note : siz of plate rack should not be less than (900x 200x1200)mm and weight of rack shall not be less than 8.50 kg each.

S&F in repairs of brass chromium plated corner glass shelf 5mm thick with bracket complete all as specified and directed.

S&F in repairs of shelf glass assembly consisting of 5.5mm thick sheet glass,shelf 120mm wide with CP bracket guard and railing 600mm long complete all as specified and directed.

S&F in repairs of 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) for kitchen sink complete all as specified and directed.

S&F in repairs of 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls,ceilings or in floors etc complete all as specified and directed.

S&F in repair of Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms)complete all as specified and directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc complete all as specified and directed.

S&F in repairs of 25 mm dia stainless steel curtain rod incl S/S decorative brackets, at ends with arrangements as approved by GE complete all as specified and directed.

S&F in repairs of PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repairs of PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints fixed to walls/floors complete all as specified and directed.

S&F in repairs of 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair of PVC (SWR) pipe, 90 mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

M&L in repairs for PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement complete all as specified and directed.

M&L in repairs for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Dismantling Asbestos corrugated & Semicorrugated etc sheetin in roof covering of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed at sitecomplete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engieneer- in Charge. Note: The Prepainted galvalume aluminium zinc GI based profile pattern steel sheet sould be TATA Blue Scope Colourbond XRW or Equivalent.

Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface with or without reinforcement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F of Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A complete all as specified and directed.

S&F of MS Framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Demolition of brick work / stone boulders masonry built in cement mortar incl all Quoins , archeas, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M & L for Brick work with sub class 'B' bricks with using Modular size Brick , straight or curved on plan exc 6m mean radius built in CM (1:6) complete as directed and specified..

M&L for Walling of random rubble,uncoursed well bonded, bedded and solidly hearted, built in CM(1:6) complete all as specified and directed.

Demolition of cement concrete (unreinforced) in Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and second coat on top of membrane. Each coat will be paid seperately.) complete all as specified and directed.

M & L for 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.

M & L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965) @ 0.30 Kg/Sqm complete all as specified and directed.

M&L for PCC (1:2:4) type B -0 using 12.5 mm graded stone aggregate, mixing with WPC (liquid) as in levelling course in sunken portions etc complete all as specified and directed. NOTE: WPC( liquid) shall be measured and paid separately under respective item.

M&L for PCC (1:5:10) type E-2 using 40mm graded stone aggregate, as in filling of sunken portion complete all as specified and directed.

S&F in repairs of 40mm dia GI Tubing as in spout pipe of medium grade including cutting in any length as required and fixed to wall & floor etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc.15cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2, using 40mm graded stone aggregate as in subbase etc.all as spd.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection or similar places, laid in alternate ways, surface finished even and smooth with using extra cement complete all as specified and directed.

M & L for Running welding in repairs thickness of metal to be welded exc 9mm n.exc 20mm complete complete all as specified and directed.

S&F in repairs of 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade complete all as specified and directed.

S&F in repairs of 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Plain colour having density of 600kg/cbm manufactured by an Iso 9001-2015 certified company.Termite proof,water proof and flame retardant PVC sheet,manufactured by single layer extrusion process complete all as specified and directed.

S&F in repairs of stainless steel self closing hinge of 75 mm size for PVC door shutter complete as specified and directed.

S&F in repairs of (50 X 15) mm size magnet door catcher for closing for PVC door shutter complete as specified and directed.

S&F in repairs of 100 mm size MS mat / glossy finish handle complete as specified and dirceted.

S&F in repairs of mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed.

S & F in repair of modular type stainless steel basket size (0.50 m x 0.53 m x 0.10 m) (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arranement complete as specified and dirceted.

All as per BOQ item no 135 as above but basket size (0.50 m x 0.53 m x 0.15 m) complete as specified and dirceted.

All as per BOQ item no 135 as above but basket size (0.50 m x 0.53 m x 0.21 m) complete as specified and dirceted.

S&F in repairs of brass spindles for bib tap and angle cock etc (as per sample kept in office) complete all as specified and directed.

S&F in repairs of Brass spindle for WHB mixer and Wall Mixer and concealed stop cock (as per sample kept in office)complete all as specified and directed.

S&F in repair of second class hard wood beads , straight ( any size ) for glazed or gauzed joinery , renewed including mitres etc complete all as specified and directed.

S&F in repair of PVC float set complete of internal flushng system fitting in side for low levelling PVC cistern Complete all as specified & directed.

S&F in repair of of good quality rubber washers for low level flushing cistern complete all as specified and directed.

Supply and fix in repair of PVC flush handle for low level flushing cistern complete all as specified and directed.

S&F in repairs of Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed,(Minimum weight 15mm-90gms) complete all as specified and directed.

Supply only India rubber washers for pillar taps,bib taps etc.or valve sizes 20mm and under complete all as specified and directed.

S&F in repair of Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S & F of jet sprey for pedestal pattern W C incl. flexible pipe and Brass Chromium Plated nuts.complete all as specified and directed.

NIDHI CONSTRUCTION

M/S Sunshine Construction

Goyal Construction

Chitragupta Construction