Nagercoil Corporation Providing BT Road at MaravankudiyiruppuChannel Karai Road in Ward no_43

Amount

Providing BT Road at MaravankudiyiruppuChannel

Earth cutting and sectioning and levellingincluding initial lead of 10m and initial llift of 2m in sand silt or other loose soil wet sand or silt not under water light black cotton soil sndy loam and ordinary soil including excavated earth etc. complete (TNBP No.20B)

Providing and laying ,spreading and compacting graded stone aggregate to wet mix macadam (WMM ) soecification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications

Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications

Providing and laying 50mm compacted thick bituminous macadam using 0.42 cum of 26.5-11.2 mm graded metal and 0.10 cum of 11.2-2.8 mm graded metal and 0.18 cumof 2.8 mm and below with 38 kgs of bitumen for premixing per 10 sqm including cost and conveyance of all materials to work site and stacking them on road side to standard departmental gauge for pre-measurement,heating the bitumen in bitumen boiler,heating the aggregates and mixing them with bitumen in mini hot mix plant, spreading the mix to the required grades and lines, compaction by 80-100 KN power roller including labour charges for loading spreading etc., including hire charges and fuel charges for mini hot mix plant, power roller, bitumen boiler and all other tools and plants employed, etc.,complete as per clause 504 of MORTH specificatoion.

Providing and laying Premix carpet with seal coat type "A" for 20mm thickness using 0.18 cum of 13.2 mm IRC HBG metal and0.09 cum of 11.2mm IRC HBG with 14.6 kgof bitumen for premixing 10 sqm of premix carpet and 0.09 cum of 6.7 mm IRC HBG metal with 9.80 Kgs of bitumen for seal coat type "A"per 10 sqm including cost and conveyance of all materials to work site and stacking them to the departmental metric gauge for premeasurement, heating the bitumen in bitumen boiler,heating the aggregates and mixing them with bitumen in mini hot mix plant for pre mix carpet only ,rolling by 60-70kn power roller,for premix carpet and seal coat over premix carpet ,including labour chargesfor spreading seal coat seperately over premix carpet etc., including hire charges and fuel charges for mini hot mix plant, power roller,bitumen boiler and all other tools and plants employed,etc.,complete as per clause 509 of MORTH specifications.