Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.5 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹37.8 L+₹3.3 L (9.47%)Rejected-AOC 73 5 NANAK NAGAR JAMMU 180004 J K | JAMMU | JAMMU | J K | 180004 | L2 | Rejected-AOC SECOND LOWEST BIDDER | |
| 3 | L3₹40.0 L+₹5.4 L (15.7%)Rejected-AOC | L3 | Rejected-AOC THIRD LOWEST BIDDER | |
| 4 | L4₹40.7 L+₹6.2 L (17.8%)Rejected-AOC | L4 | Rejected-AOC FOURTH LOWEST BIDDER | |
| 5 | L5₹41.0 L+₹6.4 L (18.5%)Rejected-AOC | L5 | Rejected-AOC FIFTH LOWEST BIDDER |
Tender Value
₹44.1 L
EMD Value
₹88,200
Closing Date
2 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Nagrota
Garrison Engineer Nagrota Pin 901208
PROVN OF TWO TOILET BLOCKS 60 X DESERT COOLER AND CERTAIN OTHER SANCTIONED WORKS UNDER GE NAGROTA
2023_MES_578684_1
GEN-75/2022-23
Open Tender
Civil Works
Item Rate
180 days
Nagrota
Class D Cat a i
8 documents required · 8 mandatory
₹500
GE Nagrota
₹88,200
Yes
25 Mar 2023
2 Feb 2023
4 Mar 2023
2 Feb 2023
2 Mar 2023
18 Feb 2023
Amount
SCHEDULE ‘A’ PART-I Excavation over area n exc 1.5 m deep and getting out in Soft/ loose soil complete all as specified and directed
Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in Soft/ loose soil complete all as specified and directed
Excavation in trenches, not exceeding 1.5 M wide and exceeding 1.5 M but not exceeding 3 M depth for foundation, etc., and getting out in Soft/ loose soil complete all as specified and directed
Surface excavation n.exc 30cm deep and avg 15 cm deep and getting out any type of soil complete all as specified and directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soilscomplete all as specified and directed.
Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed
Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed
M & L for Plain Cement Concrete Type D-2 1:4:8 (using 40 mm graded granite stone aggregate) in foundations, filling and mass concrete complete all as specified and directed
M & L for Broken brick bat hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M & L for 75 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing.
M & L for 100 mm thick Cement concrete type D 2, 1:4:8 (using 40 mm graded granite stone aggregate) in sub base of flooring/ hard standing complete all as specified and directed.
M & L for Brick work with sub-class `B' old size bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed
M & L for Reinforced cement concretetc M-30 (design Mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed
M & L for Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed
M & L for Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed
M & L for Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts complete all as specified and directed
M & L for Reinforced cement concretetc M-25 (design Mix) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
M & L for Reinforced Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) for slabs suspended on walls, beams and columns, in floors, roofs, landings and in shelves and the like complete all as specified and directed.
M & L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces complete all as specified and directed
M/L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.
M/L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces complete all as specified and directed
M & L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for rough finished surfaces complete all as specified and directed
M & L for formwork to sides and soffits of floor or roof beam, beam hauchings, girder, bressum-mers, lintels, cantilivers, shelves incl supports, overhangs, etc.also splay between floors and beams, etc. for rough finished surfaces complete all as specified and directed
M & L for TMT bar 10mm dia and over cut to length bend to shape required indd cranking bending spirally for column, hooking ends & binding with and incld mild steel wire (annealed) not less than 0.90mm dia or securing with chipscomplete all as specified and directed
M & L for Mild steel TMT bars 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beams,hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
M & L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders complete all as specified and directed
M & L for Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level using Broken stone Broken or boulders complete all as specified and directed
M & L for Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells using Broken stone Broken or boulders complete all as specified and directed
M & L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement.complete all as specified and directed
M&L rendering 15 mm thick on external surfaces of wall in cement mortar 1:4 all as specified and directed.
M & L preparing new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed
M&L rendering 5 mm thick on internal surfaces of ceiling in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and directed
M&L Preparing newly plastered surfaces of ceilings and applying three coats of white wash.complete all as specified and directed
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing complete over and including 20 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes complete all as specified and directed
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finish polishing complete over and including 20 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes complete all as specified and directed
M&L for non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.11 sqm but n. exc.0.18 sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match including 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes complete all as specified and directed
S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification complete all as specified and directed .
Box type Steel window side hung double shutters with provision for desert cooler/AC(inside for wire mesh & out side for glass), including guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded and fixed, steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 complete all as specified and directed Note:- Wire mesh and sheet glass shall be measured and paid separately complete all as specified and directed
Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS all as specified. Note:- Wire mesh and sheet glass shall be measured and paid separately complete all as specified and directed
Supply and fix Framed work such as grills, gratings, etc. with ends of bars or forged into spikes, framed guard bars, barred iron doors; ladders; framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe 290 Gde E-165, complete all as specified and directed.
S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed
S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed
S & F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed
S & F 150mm size extruded aluminium handle cast type anodised complete all as specified and directed
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.
S & F 110mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.
S & F 110 mm bore PVC (SWR) bends any radius. complete all as specified and directed
S & F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed
S & F 75 mm bore PVC (SWR) bends any radius with oval access door complete all as specified and directed .
S & F stop valve 15 mm bore cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed
S & F stop valve 20 mm bore cast copper alloy chromonium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions. complete all as specified and directed
S & F PVC connection pipe 15mm size with PTMT nuts of 600 length including fixed complete all as specified and directed .
S&F , 20 mm bore, ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule. complete all as specified and directed.
S&F 500 ltr capacity Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed
S&F75 mm bore HDPE Pipes PN 10 complete all as specified and directed
S&F PVC (SWR) 100mm dia floor trap with , plain with grating including jointing with solvent cement.
M&L PCC 1:2:4 type B1 using 20mm graded stone agregrate as in surface channel and drain complete all as specified and directed
M&L for Rendering 15mm thick in two layers [base layer 10mm in CM 1:4 & finishing layer 5mm thick in cement mortar (1:4)] using water proofing compound in 2nd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified & directed. Note : WPC shall not be measured and paid separately.
M&L For extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including form moulds mitred/stopped ends etc. complete all as specified and directed
M/L 75 thick mm Cement concrete Type B- 1 1:2:4 (using 20 mm graded stone aggregate) in sub base of floor complete all as specified and directed
M&L PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in copings, plinth course, damp proof course, bed blocks, benching, PCC cills and similar items complete all as specified and directed .
M&L Hard core of gauze n.exc 63mm deposited spreaded and leveled in layers n.exc 15cm thick, watered and rolled/rammed to a true surface complete all as specified and directed .
M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment to match the shade of tiles over 20mm thick screed bed in CM 1:4 and 100 mm thick PCC type C-2 1:3:6 as in sub base complete all as specified and directed
S&F aluminium (powder coated with approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.50 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position. Note:-(i) Section No given above are of Make-Jindal,
S&F white vitreous china counter wash hand basin, of size-410X910X150mm fixed in granite counter by making suitable size hole, new brackets, 32mm dia brass chromium plated waste coupling, CP botle trap complete all as specified and directed
Supply and fix 630mmx445mm swivel mirror complete all as specified and directed. Make Cat Part No AKP-35795 of Jaquar or equivalent
Supply and fix rimless wal ung type watet closet with inbuilt jet spray and connected to concealed flush tank complete all as specified and directed.
Supply and fix single piece slim concealed cistern with floor ounted frame incl metroploe flush valve concrealed to wall hung water closet complete all as specified and directed.
Supply and fix table top wash hand basin complete all as specified and directed.
Supply and fix blush tall boy deck mounted sensor faucet chrome towel rack chrome type complete all as specified and directed.
Supply and fix towel rack chrome type complete all as specified and directed. Make Cat Part No ACN1131N of Jaquar or equivalent
Supply and fix Soap dish holder complete all as specified and directed. Make Cat Part No ACN1131N of Jaquar or equivalent
S&F PTMT single towel Rail of size 600 mm long as specified and directed.
S&F health faucet with 1 meter long easy flex tube in chrome finish & wall hook, complete all as
S&F stainless steel soap dish holder including fixing arrangement complete all as specified and directed.
S&F of 125 mm dia Fancy type Chromiun plated shower rose shower rose type fixed to 15mm dia pipe complete all as specified and directed.
Supply and fixing Vitreous China Urinal, full stall type, white with PTMT waste fitting, PVC waste pipe, brass CP urinal spreader including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site complete all as specified and directed. .
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm eachand n exc 4 sqm and removing from site complete all as specified and directed. .
Taking down shutter of any description area exc. 1 Sqm and n.exc. 2 Sqm and removing from site. complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. .
Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness complete all as specified and directed
Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster complete all as specified and directed.
Supply and fix Pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed
Supply and fix Factory made, 2nd class hard wood, plain framed, Double/Single paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete all as specified and directed
Supply and fix 3 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
Supply and fix Sheet glass 3.00mm thick pin head type glass.ordinary quality and glazing with oil putty complete all as specified and directed.
Supply and fix Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples complete all as specified and directed
M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in panels and joints filled with bituminous mastic filling with 1 part of bitumen and 3 part of sand complete all as specified and directed.
M & L for Glazed ceramic colored tiles 300mmx600mmx 6 to 7mm thick,as in patches in vertical surfaces such as dado, skirting, wall etc set & jointed in neat cement slurry and pointed with coloured cement to match with tiles in over and including 10mm thick cement plaster in cement mortar 1:4. including dismantaling/demolation/Taking down Note:- Rates also includes in this item for necessary raking, circular cutting or notching and waste on tiles complete all as specified and directed
Supply and fix 300mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed .
M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including three coat of white wash on ceiling including preparation of surface complete all as specified and directed .
Supply only Liquid water proofing compound complete all as specified and directed .
Supply and fix Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes using steelconforming to I. S.1161- 2014/ Is 4923-1997 grade St.-210 complete all as specified and directed.
Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Supply and fix Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed.
Supply and fix 4 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling flat or sloping complete all as specified and directed.
S & F in repairs aluminium anodized / GI powder coated snap grid frame work of grid size 605x605mm including 6mm dia GI hangers (upto 1200mm long) for false ceiling including notching and preparing holes, including aluminium / powder coated cleat / corner pieces and GI 4mm dia,suspenders with utterfly clips, wall angle of size 24x24mm, main runner (tee) of size 24x38mm, cross tee of size 24x28mm, (No of suspenders shall be decided by the GE as per actual size requirement) including 6mm thick fibre cement plain building boards fixed to aluminium /GI powder coated snap grid and provinding two coats of oil bound distemper and including dismantling of a;; and ceiling board, any thickness including cover fillets if any complete all as specified and as directed.
Applying two coat of synthetic enamel paint over a coat of red oxide primer on new / untreated steel surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and directed.
Three coat of white wash on newly plastered surface on wall including preparation of surface complete all as specified and directed.
Two coat of white wash on old surface on wall including preparation of surface complete all as specified and directed.
Preparation of newly plastered surfces of Ceiling and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick complete all as specified and directed
Material and labour for preparation of newly plastered or un plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.
Demolition of stone slabs of any description or thickness in kitchen platform, floors,aprons laid, bedded,pointing in any mortar etc complete all as specified and directed.
M & L for Udaypur green stone 15 to 18 mm thick. (table rubbed and polished) as in cooking/WHB plateform of size not less than 2 m in length, incl cutting for sink/WHB over prepared surface and pointing with white cement 1:2 using marble dusts admixture of pigment to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed..
M & L for Precast reinforced cement concrete slab 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) and set in CM 1:4 .incl formwork complete all as specified and directed.. ( NOTE : (reinforcement shall be measured and paid for separately).
M & L for Rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position including PVC float valve 20 mm bore and including dismantling of existing water storage tank complete.
M & L for Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position including PVC float valve 20 mm bore and including dismantling of existing water storage tank complete all as specified and directed
Taking up or down steel tubing and connections including cleaning for refixing or removal to store upto 25mm bore complete all as specified and directed .
Supply, lay and fix 15 mm bore galvanised iron water tube medium grade with all fitting and laid in trenches or floor or wall, complete all as specified and directed.
Supply, lay and fix 20 mm bore galvanised iron water tube medium grade with all fitting and laid in trenches or floor or wall, complete all as specified and directed.
Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls complete all as specified and directed..
M & L for 15mm bore fancy type bib tap brass CP (Long body) with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.
M & L for 15mm bore fancy type CP brass Mixer, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.
S&F Cast copper alloy CP angle / stop Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe complete all as specified and directed
All as per item 119 above but with long shank and cup (concealed type)
S&F for CP Pillar taps, 15mm fancy type cast copper alloy, with capstan heads, screwed down high pressure, without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed .
S&F for Vitreous china squatting pan “ORISSA” pattern size 630x450mm ( Make : Hindware)white with integral foot rests all as fixed in repairs including cast iron ‘P’ or ‘S’ trap 100mm bore including PVC low level cistern of 10 litres capacity including brackets jointing to flush pipe, PVC connection (600x15mm), flushing pipe complete fixed in repair complete all as specified and directed
S & F Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’&'P' trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc including making good to floor and fixing in repairs complete all as specified and directed
S & F PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and and fixing arrangement including making good to floor and fixing in repairs
S & F Chromium plated health faucet with 1 mtr long easy flex tube for fixing with 15mm pipe alongwith wall hook complete all as specified and directed. Make: Hindware Cat Part No. F160027 or equivalent make of Jaquar(Continental)/Marc/ Parryware
S & F Chromium plated grab bar complete fixed to wall complete all as specified and directed. Make: Hindware Cat Part No. F160027 or equivalent make of Jaquar(Continental)/Marc/ Parryware
Supply and fix Toilet paper holder with flap recessed type of stainless steel ,complete all as spcified & directed Make Cat Part No AHS-1553 of Jaquar or equivalent
Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm including making good to floor and fixing in repairs ,complete all as spcified & directed .
S&F in repairs wash hand basin, vitreous china, white, flat back (550x400mm) cutting for and pinning ends of brackets(Make:Parryware Code No.-0471,Indus Basin (white) or equivalent. including making good to floor and fixing complete all as spcified & directed
S & F in repairs,Wash basins, vitreous china white of oval shape counter top, excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end complete all as specified and directed . Make : Cera/Parryware/Hindware.
S&F 100mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4) complete all as specified and directed .
S&F 75mm bore CI floor trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4) complete all as specified and directed .
S&F 100mm bore CI Nahani trap with grating including jointing CI pipe in run lead, cutting holes in walls and making good surface in cement concrete surface type B-1 (1:2:4) complete all as specified and directed .
M & L for 100mm dia/ bore Cast iron pipes with flanged ends, centrifu?gally cast, class A, in any length laid in trenches complete all as specified and directed.
M & L for 80mm dia Cast iron pipes with flanged ends, centrifu?gally cast, class A, in any length laid in trenches complete all as specified and directed.
M & L for upto 150mm bore Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and directed.
M & L for Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 150mm dia of pipe ,complete all as spcified & directed
M & L for Cutting into existing manhole for connecting new drains and making good to pipes and rendering cutting out existing benching for and forming branching for and forming branch channel (1/2 round or ¼ section ) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as specified and directed for 110mm dia of pipe complete all as specified.
Demolition and breaking up 150mm dia drain pipes (Salt glazed ware, AC or reinforced concrete ) and set in cement mortar ,complete all as spcified & directed
M & L for Concrete bed to drain pipes laid in trenches including packing under and haunching against the sides of pipes aftaer they are laid and tested in cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate for 150mm bore pipe, ,complete all as spcified & directed
M & L for Salt -Glazed stoneware drain pipes 150 mm dia laind in trenches and jointed complete all as spd and directed
SCHEDULE ‘A’ PART-II M&L for Point wiring using FRLSH PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawn through and including PVC casing capping of suitable size with all fitting and fixture accessories on roof, wall, celling etc terminated in and incl concealed pressed steel sunken box readily available ( having wall thickness not less than 1.22 mm upto 200 x 300 mm box size & having wall thickness not less than 1.63 mm beyond 200 x 300 mm ) duly covered with 3 mm thick bakelite sheet cover for fixing switches , sockets , fan regulators etc incl testing and making good to disturbed surface to match existing surface for one light/fan/bell point complete all as specified and directed.
All as per item No. 142 above above but for one 3 pin socket outlet point, 5 Amps control by one switch on independent board complete all as specified and directed.
All as per item 142 above before but point wiring with 2.5 sqmm FR multi stranded copper conductor cable for main circuit and 2.5 sqmm cable as earth continuity conductor for one 15 Amp socket out let controlled by one 15 Amp switch on independat board.
S&F switch piano flush type 5 Amps single pole one way complete all as specified and directed.
S&F switch piano flush type 15 Amps single pole one way complete all as specified and directed.
S&F Switch -Socket outlet 2 in 1, 3 pin, 6 and 16 amp flush type complete all as specified and directed.
S&F socket 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.
Supply and fix Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified & directed.
S & F Angular Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings with 10 watt B22 CDL 3 star LED lamp complete all as specified and directed.
Supply and fix plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed. Make :-Crompton Cat Part No BRISK AIR NEO or equivalent in Havells / Bajaj / Orient
S&F Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size ,complete all as spcified & directed Make:- Crompton Greaves Cat No. CCS-100-20-65-HL2-DP-NWH or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/ Havells
S&F LED linear light fittings 20 Watt basic all purpose surface and wall mounted and LED batten with polycarbonate housing and intrigated electronic driver and connecting with 3 core flexible copper cable PVC insulated of size 16/0.20 mm etc complete all as specified and directed. Make:- Crompton Greaves Cat No. CCS-100-20-65-HL2-DP-NWH or equivalent to Bajaj/Philips/Wipro/Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/ Havells
Supply and fix LED Bulkhead luminaire 10 W Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs complete all as specified and directed. Make:- Havells Cat No. RUGBYGENXFTS10WLED865SSYMBOPC or equivalent to Bajaj/Philips/ Wipro/ Syska LED/ M/S Surya Roshni Limited/M/S Jaquar & Company Pvt Ltd/Crompton Greaves
Supply and fix sheet metal enclosure powder coated single phase DB for fixing of MCBs, 4 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.
Supply and fix sheet metal enclosure powder coated single phase DB for fixing of MCBs, 8 ways double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces complete all as specified and directed.
S & F MCB SPN 40 -63 Amps C CURVE 10 KA 240 Volts complete all as specified and directed.
S & F MCB SP 6 to 32 Amps C CURVE 10 KA 240 Volts complete all as specified and directed.
Supply and laying or fixing or passing through pipe and testing PVC insulated aluminium conductor cable, 1100 Volt grade, heavy duty served with inner sheathing of PVC tape armoured with galvanized steel wire or tape and overall PVC sheathed, twin core stranded conductor flat or circular, 16 sqmm, nominal cross sectional area, as in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia suspension wire including taking down existing unserviceable service connections and removing from site complete all as specified and directed.
Supply installaion , connecting , testing & commissioning of desert cooler steel body made out of 22 guaze MS sheet duly painted with 2 coats of anti corrosive paint over one coat of red oxide primer of both sides ,copper wound motor , 1450 RPM nominal capacity of Air 4000 cum / hr , having 500 mm plastic body fan with suitable submersible lifting pump having minimum head 5 mtr , storage capacity of tankshould not be less than 40 litre complete all as specified and directed.
M& L for framed work such as angle iron stand of desert cooler with ends of bars / angle iron shouldered/ riveted / forged into spikes / welded including two coats of synthetic enamel paint over a coat of red oxide primer ,complete all as spcified & directed
Supply and Fix water cooler electric driven (Single phase), partially stainless steel having approximate storage capacity of 150 Ltrs and nominal cooling capacity of 150 Ltrs /Hrs including all accessories complete all as specified and directed.
S&F 15 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed..
Cutting and screwing existing G.I tubing of 15 to 50 mm for alterations or additions on pipe for connectors (Each cut measured) complete all as specified and directed.
S & F water tubing of size 40mm bore 'medium grade' galvanised with all fitting and fixed complete to walls and ceiling or laid in floors complete all as spcified & directed
M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.
S & L brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' bricks laid in trenches flat complete all as specified and directed.
Supply, laying and testing cable XLPE insulated screened PVC bedded, galvanised steel strips or wire armoured, electric power cable (heavy duty) with stranded aluminium conductor, 1100 volts grade of size 16 sqmm 2 core, complete all as specified and directed.
Allied Technologies
M/S CJ CONSTRUCTIONS
ASHOKA ENGINEERS AND BUILDERS
M/S KOUSHAL INFRASTRUCTURE & CONSTRUCTION
Kalsi Engineers and contractors
ASHWANI KUMAR KHAJURIA AND SONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .