PROVN OF TOILET BLOCK AT P-158 OF 154 INF BN AND SPL REP TO TOILET AT MT SEC OF 15FBSU AND SPL REP TO FOOTPATH INFRONT OF BLDG NO 510 and 511 AT 172 INF BN AT BRICHGUNJ MIL STN

Amount

Surface dressing n. exc 15 cm deep in soft/ Loose soil and getting out complete all as specified and as directed.

Surface excavation n.exc 30 Cm deep and averaging 15 Cm deep and getting out Hard/ dense soil, etc complete all as specified and as directed.

Excavating over areas, not exc 1.5 m deep for foundation, laying of cables etc., and getting out in hard/dense soil all as specified and as directed

Excavation in trenches in hard/dense soil n exc 1.5m deep and n.exc 1.5m wide and getting out, etc complete all as specified and as directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and getting out in soft / loose soil complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removing excavated materials to a distance n.exc 50m and depositing where directed at a level n.exc 1.50 m above the starting point complete all as specified and as directed.

Material and Labour Coarse aggregate (Kankar or Laterite) grading 1, 90 to 40mm size complete all as specified and as directed.

Material and Labour for moorum filling in floors or pavings, laid in layers n.exc 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Material and Labour for hardcore of gauge exceeding 63 but n.exc 100mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and Labour broken stone or boulders hard core of gauge n.exc.63 mm, deposited, spred and levelled in layers n.exc. 15 Cm thick, watered and rolled/rammed to a true surface, etc complete all as specified and as directed.

Dismantling corrugated steel sheeting, any gauge, thickness, including Removing L-type or J-type bolts in Roof Covering complete all as specified and as directed.

Taking down cement plaster on brick/stone or concrete surfaces including hacking for key , scrubbing down with water etc complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed.

Taking down chowkat with shutter without taking off shutters from the frame n.exc 1.5 Square metre complete all as specified and as directed.

Taking down chowkat with shutter without taking off shutters from the frame exc 1.5 Square metre but n exc 4 Square metre complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), cement concrete ( un reinforced), etc complete all as specified and as directed.

Demolition of precast concrete block walling complete all as specified and as directed.

Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds stopped edges complete all as specified and as directed.

Material and Labour for PCC 1:3:6 type C2 (40mm graded stone aggregate) as in bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested for CI pipe 150 mm bore complete all as specified and as directed..

Material and Labour for 25 mm thick DPC using cement conc 1:2:4 type B0 (12.5mm graded stone aggregate) to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.

Material and Labour for providing PCC 1:4:8 type D2 (40mm graded stone aggregate) as sub base 75mm thick complete all as specified and as directed.

Material and Labour PCC 1:3:6 C2 (40mm graded aggregate) 75 mm thick for paving, sub base path/hardstanding etc complete all as specified and as directed.

Material and Labour 75mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in flooring finished even and smooth using extra cement complete all as specified and as directed..

Material and Labour for 75mm thick Cement concrete in C1 type (1:3:6) using 20mm graded stone aggregate as in plinth protection and finished even and smooth with using extra cement complete all as specified and as directed.

Material and Labour PCC 1:4:8 D2 (40mm graded aggregate) 100mm thick for paving, sub base path /hard standing etc. complete all as specified and as directed.

Material and Labour Precast cement concrete hollow block masonry 1:2:4 type (using 12.5 mm graded stone aggregate) as in block masonry with Hollow bocks, 10cm Thick and set in cement mortar 1:4 compete all as specified and as directed.

Material and Labour for pre-cast cement concrete solid block masonry with solid block using cement concrete 1:3:6 type C1 (20mm graded stone aggregate) not exceeding 10cm in width, set in cement mortar 1:4 complete all as specified and as directed.

Material and Labour PCC 1:4:8 type D2 (using 40mm graded stone agg) as in foundation filling and mass concrete etc complete all as specified and as directed.

Material and Labour for PCC 1:3:6 type C2 (using 40mm graded stone agg) an in fdn of manholes complete all as specified and as directed.

Material and Labour PCC 1:2:4 type B2 (using 40mm graded agg) as in foundation filling and mass concrete etc complete all as specified and as directed.

Material and Labour for pre-cast cement concrete block PCC 1:3:6 type C1 (20mm graded stone aggregate) masonry with solid block exc 10cm in width and setting in CM 1:6 complete all as specified and as directed.

Material and Labour for precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 complete all as specified.

Material and Labour for cement concrete type B1 1:2:4 (20mm graded aggr) as in cills, steps and other similar bands, plinth course, copings surface channels, benching etc of manholes finished fair and even complete all as specified and as directed.

Material and Labour precast RCC 1:2:4 type B1 (Using 20 mm graded stone of agg) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cm 1:4 complete all as specified and as directed..

Use and waste for formwork to edges of rough finished surfaces of concrete flats, window cills, concrete railing etc complete all as specified and as directed.

Use and waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter complete all as specified and as directed.

Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc also spays between floors and beams etc complete all as specified and as directed.

Use and waste for formwork to soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick (horizontal or sloping) complete all as specified and as directed.

Use and waste for formwork rough finished surfaces of square or rectangular pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed..

Use and waste for form work to chullah hoods, chajja, troughs and similar items including edges rough finished surfaces of concrete complete all as specified and as directed.

Material and Labour for RCC M 30 (design mix) for foundation, including rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete complete all as specified and as directed.

Material and Labour for RCC M 30 (design mix) for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and Labour for RCC M 30 (design mix) for beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed.

Material and Labour for RCC M-30 (design mix) for chajjas complete all as specified and as directed.

Material and Labour for M 30 (design mix) for columns, pillars, piers, posts and struts complete all as specified and as directed.

Material and Labour for TMT bars as in reinforcement 10 mm dia and over cut to length bent to shape required incl cranking, bending, hooping ends and binding with MS wire (annealed) not less than 0.9 mm dia) complete all as specified and as directed.

All as per item No.48 herein before but 6 mm to 8 mm dia TMT

Material and Labour for TMT bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers, and binders in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire complete all as specified and as directed.

Supply and fix plates (Plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with attachment etc and fixed by riveting or welding or with nut and bolts (including nut and bolts) conforming to Fe- 410-W Grade E- 250, quality B, complete all as specified and as directed.

Supply and fix mild steel flat iron 40 x 3mm as in wind tie including all necessary drilling, bolting or riveting etc., confirming to Fe 290 complete all as specified and as directed.

Supply and fix MS Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed

Supply and fix Mild steel bolts exc 12mm n' exc 20mm dia , purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long complete all as specified and as directed.

Supply and fix Bands, straps, supports or stays for rainwater pipe, ventilating pipes including bolts, if required hooks (stays), heavy, for large gates, hook and spindle hinges, large hasp and staples, chains, handmade sliding bolts, clamps, hold fast, wall ties, hooks for hanging fans, rung, handles, plain angle cleats, for securing pulins tow wood trusses or rafters, knee piece inserts, two way and three way straps, plates washers and similar articles confirming to Fe-290 Gde E-165 etc complete all as specified and as directed by Engineer in Charge.

Supply only water proofing compound conforming to IS-2645 1975 complete all as specified and as directed.

Material and Labour 15mm thick rendering in cement plaster 1:6 on fair faces of brick or concrete surface, etc completed all as specified.

Material and labour for 15mm thick external rendering in two layers of 5mm thick in CM (1:4) mixed with water proofing compound (water proofing compound shall be used as per manufacturer’s instructions) over a coat of 10mm thick in CM (1:6) over brick or concrete surfaces finished even and fair. Note: Supply only WPC will be measured and paid separately

Material and Labour for rendering 10 mm thick in CM 1:4 on ceiling finished even and smooth without using extra cement etc complete all as specified and as directed.

Material and Labour 10mm thick rendering in cement plaster 1:4 on fair faces of brick or concrete surface, and finishing the surface even and smooth w/o using extra cement etc complete all as specified and as directed.

Material and Labour for rendering 10 mm thick in CM I:6 finished even and smooth without using extra cement and making the surface finish by applying 3 mm thick wall care putty on wall all complete all as specified and as directed.

Material and Labour for rendering 15 mm thick in one layer on concrete surface in cement mortar 1:4 mixed with WPC @ 3% by weight of cement finished fair and even without using extra cement complete all as specified and as directed. Note: Supply only WPC will be measured and paid separately

Material and Labour for 15 mm thick rendering in CM1:4 on concrete surfaces finished fair and even complete all as specified and as directed.

Material and Labour for applying three coats white wash on newly plastered surfaces of wall including preparation of surfaces complete all as specified and as directed

Material and Labour for Preparation of newly plastered surface of wall and applying two coats of Oil bound distemper over a coat of primer complete all as specified and as directed.

Material and Labour applying two coat of cement base paint over a coat of white wash on new plastered or untreated surface of wall including preparation of wall surfaces complete all as specified and as directed.

Material and Labour for oil bound distempering two coats including complete removal of old decorated, plastered or unplastered surfaces of wall complete all as specified and as directed by Engineer - in -Charge.

All as per item No 67 here in before but on ceiling surfaces

Material and Labour for preparation of new steel surface exc 10cm width or girth and applying one coat of red oxide primer and two coat of synthetic enamel paint glossy complete all as specified and as directed.

Material and Labour for preparation new steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting or when painted in a different tint, and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete.

Material and Labour for two coat of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on newly plastered wall surfaces including preparation of surfaces etc complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for two coats of weather proof exterior acrylic emulsion paint with anti fungal property on old painted wall surfaces over a coat of primer including preparation of surfaces by complete removal of existing treatment of any description complete all as specified and as directed

Taking up or down, 15mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for 15 mm bore unplasticised PVC pipes of pressure rating 10 kg/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Material and Labour for 20 mm bore unplasticised PVC pipes of pressure rating 10 kg/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Supply and fix 25 mm bore GI tubing medium grade laid in trenches / floor or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and as directed

Supply and fix 40 mm bore GI tubing medium grade laid in trenches / floor or fixed to wall in any length with screwed and socket joints together with all galvanised GI fitting such as sockets, bends, elbows, tees, reducers, unions, jointing materials etc and pressure testing, washing out complete all as specified and as directed

Supply and fix PVC (SWR) 75mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors

Supply and fix in repairs for 20 mm dia bore gun metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.

Supply and fix in repair stop valves 15mm dia bore of cast copper alloy, screwed down, high pressure, with fancy type, chromium plated, screw both ends for union and fixed.

Supply and fix in repairs Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix for PVC (SWR) vent cowl, bore of pipe in 75 mm, etc complete all as specifed and as directed.

Supply and fix PVC (SWR) vent cowl 110mm bore complete all as specified and as directed.

Supply and fix in repairs PTMT gratings 125mm dia, complete all as specified and as directed by Engineer-in-Charge

Supply and fix repairs PVC connection 15mm size with CP brass Nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge

Supply and fix 75 mm bore PVC (SWR)bend any radius complete all as specified and as directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 600 mm

Supply and fix PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

Supply and fix stop valves 15 mm chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedStop valve CP 15mm

Material and Labour for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repairs Bib tap cast copper alloy chromium plated 15mm dia with fancy type screwed down screwed for iron pipe or brass ferule etc complete all as specified and as directed by Engineer-in-Charge

Material and Lobour for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

Supply and fix 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and as directed.

Supply and fix 25 mm bore Gun Metal gate valve with iron wheel head ISI Marked screwed both ends suitable for GI tubing complete all as specified and as directed

Material and Labour for cutting existing 50mm GI line and making branch connection of 25 mm dia GI line complete all as specified and as directed.

Material and Labour for 20mm thick Granite of any type work table rubbed and polished in steps, jambs, pillars, cooking platforms and the like including pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including backing coat 20mm thick CM (1:4) complete all as specified and as directed

Material and Labour for Chequrred cement concrete tiles with grey cement and pigment of size 300x300x25 mm, set jointed and pointed in neat cement slurry over 15 mm thick screed in CM (1:6) all as specified.

Material and Labour glazed polished finished chequerred cement concrete tiles 300x300mm x 25mm thick size set, jointed and pointed in neat cement slurry incl 20mm thick in CM 1:6 bedding layer of mortar complete all as specified and as directed by Engineer - in charge.

Material and Labour for coloured glazed ceramic tiles, (300 x 200mm) x 7mm thick on vertical surfaces set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tile over and including rendering 10mm thick in CM 1:3 complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for glazed coloured ceramic tiles of size (450 x 300) x 7mm thick, on vertical surfaces such as skirting dados and risers to steps etc, including 10mm thick rendering in cement plaster 1:3, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and as directed by Engineer-in-Charge

Material and Labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Square metre n.exc 0.11 Square metre, in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including screed bed or bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

Material and Labour for coloured matt finished ceramic tiles joint free area exc 0.11 Square metre but n.exc 0.18 Square metre, set and jointed in neat cement slurry in floors and pointed with coloured cement to match including cement mortar screed bed 20mm thick 1:4, complete all as specified and as directed by Engineer-in-Charge

Material and Labour for 150mm dia CI pipe (sand cast) in any length with (or) without ear laid in trenches and jointed in CM 1:1 complete all as specified and as directed

Supply and fix in repairs, 10 ltr capacity, PVC flushing cistern, white, syphonic action type, low level, with inlet, ball valve float and handle, PVC flush pipe, brackets etc including taking down unserviceable flushing cistern etc, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix vitreous china wash basin white flat back size 550 x 400 mm including 15 mm dia fancy type pillar tap chromium plated CP waste coupling, chain and plug, waste fitting, union and waste pipe 32 mm dia of required length and all necessary 450 mm long outlet and inlet PVC connection pipe with PTMT check nuts complete all as specified and as directed.

Supply and fix in repairs vitreous China urinal, half stall type complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580x440mm white with integral foot rest and including connection to trap and to flushing pipe, anti syphonage pipe etc. complete including making good to floor.

Supply and fix Vitreous China wash down water closet pan (pedestal pattern),Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device white (including fixing bolts, flushing cistern and flush pipe)connection to trap and to flushing pipe, anti syphonge pipe etc, including making good the floor complete all as specified and as directed by Engineer-in-Charge

Supply and fix vitreous China wash hand basin of 590 X 450mm (CAT no.324RHINE of make Neycer or equivalent of Parryware/Hindustan), including 15mm dia swan neck fancy type chromium plated pillar tap (Cat No.G0203A1, Make - Parryware), CP waste coupling, chain and plug, waste fitting, union and waste pipe 32mm dia, brackets, PVC connection 450mm long with check nut, including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix rotational moulded polythelene water storage tanks tripple layer of size 1000 Ltrs capacity (cylindrical vertical with closed top) with tank cover(top), hoisted and fixed in position complete all as specified and as directed

Supply and fix Rotational moulded polyethylene water storage tanks of capacity 500 Ltr (cylindrical vertical with closed top) with 20mm dia float valve, hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed

Supply and fix Aluminium anodised barrel tower bolt of extruded section of size 150 mm long complete all as specified and as directed

Supply and fix floor door stopper of length 140mm of Aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed

Supply and fix as in repairs aluminium, anodised, barrel tower bolt of extruded section, 150 mm long, complete all as specified and as directed by Engineer-in-charge.

Supply and fix 150mm long extruded, aluminium alloy, anodised, handles, fabricated type, complete all as specified and as directed by Engr-in-Charge.

Supply and fix Butt hinges, of size 100 mm length extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed type B-21 complete all as specified and as directed

Supply and fix as in repairs Butt hinges, 100mm length extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Aluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge.

Supply and fix Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangements etc., complete with standard aluminium sections, complete all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections handles and locking arrangements shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particleboards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply and fix Aluminium Die cast Body Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

Supply only 4.0mm thick Sheet glass ordinary quality and glazing with oil putty in Square exc 0.5Square metre in each pane complete all as specified and as directed

Supply only 12 mm thick pre-laminated particle board, exterior grade, pre-laminated on both side with decorative choice lamination fixed with aluminium beading as in door panel complete all as specified and as directed

Supply only 4 mm thick sheet figured glass and glazing with rubber packing around the glass, in squares exceeding 0.50 Square metre in each pane complete all as specified and as directed.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated/ semicorrugated sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridges to wall, fixed with self tapping screws as specified

Supply and fix as in repairs 150 mm long extruded, aluminium alloy anodised handle, fabricated type, complete all as specified and as directed by Engineer-in-charge.

Material and Labour for removing loose and broken concrete by chiseling / picking etc upto a depth of 80 to 100mm from columns, beams and similar structural members, cutting edges, clearing the dismantled portion with wire brushes etc., to remove dust, dirt and other foreign particles etc., and washing with clean water with pressure including necessary scaffolding and removal of debris to a distance n.exc 50m, complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for non shrink, cementitous micro concrete mixed with 12.5mm graded stone aggregate using Renderoc RG or equivalent by weight (18 kilogram Aggregate :25 kilogram Renderoc RG) respectively (as per manufactures instruction) laid in average thickness 80 to 100 mm in surface of columns, beams, parapets and similar structural members including use and waste of water tight formwork, complete all as specified and as per directed by Engineer-in-Charge.

Material and Labour for applying one coat epoxy bonding agent @ 2.6 Square metre/lit or as per manufactures instruction to old concrete surfaces of columns, beams and similar structural members complete all as specified and as per directed by Engineer-in-Charge. Make Nitobond EP of Fosroc or equivalent

Material and Labour for spraying curing compound as per manufactures instruction on freshly cast concrete surfaces all as specified. Make : Concure WB white of Fosroc.

Supply and fix brass chromium plated tubular towel rail 20 mm dia, D type 60 cm long between flanges Towel rail brass chromium plated 60 cm

Material and Labour for taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises and apply water proofing treatment with the following specifications complete all as specified and as per manufacturer’s instructions:- (i) Rendering 10mm thick in CM 1:4 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement as leveling course (ii) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (iii) Laying APP membrane (STP Aquashield or equivalent) weighing 3to 4Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm. (iv) Apply one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm over the membrane. Note:- Water proofing compound shall be measured and paid separately)

Taking down copper/aluminium point wiring(light, fan, socket or power) complete including fittings and fixtures switches, ceiling roses, regulator, socket, light fittings etc removing material to store for keeping in safe custody or for taking credit and making disturbed surface of walls/ceiling good.

Material and Labour Point wiring with 1.5sqmm sinfgle core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC conduit and all accessories fixed to wall/ roofs/ floors/ ceiling etc and including provision of 1.5 Sqmm copper cable green in colour as earth continuity conductor to common earth dolly, including fabricated steel terminal box made out of MS sheet concealed in wall, with 3mm thick laminated sheet top cover for housing the switches socket outlets, fan regulators etc. all as specified and as directed for One light/fan point controlled by one switch

All as per item no 138 here in before but One 3 pin switch socket combination outlet point 5 amps on independent board.

Supply and fix in repairs of LED fluorescent tube light fitting 20 watt 230 Volt Energy efficient, Nano diffuser technology to ensure minimum loss in light transmitted, zero mercury content-green light solution , long life of over 30000 hours box type, with electronic ballasts, bipin holders, connector block, etc complete with all accessories internally pre-wired, including LED tube/ lamp and connecting with twin twister copper flexible wire from connector of fitting to ceiling rose, complete all as specified and as directed by Engineer-in-Charge. Make: Phlips Cat No.BN 021C LED 20S - 6500 PSE OD GR or equivalent in Wipro/ C&S/ Bajaj /Crompton. Note:-Light fittings shall be of PF >0.90

Supply and fix, Switch piano, flush button, single pole, ISI marked, one way 5 Amps 240 volts

Supply and fix exhaust fan suitable for on working of AC 230 V ,50 Hz 380 mm sweep 1440 RPM, with heavy duty motor ,incl louvers complete all as specified Make: Havells/Crompton/Orient

Material and Labour for ceiling rose surface bakelite 65 x 50mm 3 terminal complete all as specified and as directed.

Supply and fix in repair MCB single pole 240 volts, 5 to 32 amps complete all as specified and as directed by Engineer-in-Charge Make : Legrand/C&S/L&T

Supply and fix in repair MCB DP, 240 volts, 6 to 32 amps C series complete all as specified and as directed by Engineer-in-Charge Make : Legrand/C&S/L&T

Supply and fix MCB SPN, 240 Volts 6 to 32 amps complete all as specified and as directed by Engineer-in-charge

Supply, lay, test and commissioning underground XLPE insulated and PVC sheathed, armoured heavy duty underground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 Core 6 sq mm

Material and Labour for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and as directed electrical plate No. 3 of SSR part - I

S&F New generation energy saving & envoi mental friendly security light 21 Watt, long life versatile pressure dia cast aluminium IP65 road way luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed. Make: PhilipsCat No BRP022 LED 20CW MR S1 PSU GR or equivalent model of Wipro / Bajaj

Supply and fix switch socket outlet 3 & 2 pin (mult pin) 5 amps flush type, complete all as specified and as dircted by Engineer-in-Charge.

Supply of fixing energy efficient LED smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours included lamp and connecting with twin core sheathed cable from fitting to ceiling rose all as specified and as directed. Make Philips Cat no. BN021CLED20S PSU CDL GR or eqvt in make of Bajaj / Wipro.

Supply and fixing energy efficient LED Smart bright batten 10 watt fitting 2ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 25000 hours including lamp and connecting with twin core sheathed cable from fitting to ceiling rose all as specified and as directed. Make : Philips Cat No BN021C LED10S -6500 PSU GR S1 or eqvt in make of Bajaj/Wipro/Crompton.

Supply and fix metal enclosure distribution board SPN, 4 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs, including taking down old MCB/DB, complete all as as specified and as directed by Engineer-in-Charge.Make :Legrand/C&S/L&T Note:- Incoming & Outgoing connections from the DB shall be provided with proper lugs/thimbles etc...

Supply and fix MCB SPN, 240 Volts 6 to 32 amps complete all as specified and as directed by Engineer-in-charge

Supply and fix New generation energy saving & environmental friendly long life versatile pressure 21 Watt fitting along with suitable dia GI pipe fitting , cast aluminium IP 65 road way luminaries with high power LEDs as light and electronic driver complete all as per Philips Cat No. BRP022 LED 21 CW MR S1 PSU GR or equivalent model of Wipro/Bajaj with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed

Supply and fix ventilating fan suitable for on working of AC 230 V ,50 Hz 200 mm sweep, incl louvers complete all as specified Make: Havells Celso HSN code 8414/ Crompton/ Orient

Supply, lay, test and commissioning underground XLPE insulated and PVC sheathed, amoured heavy duty ground cable suitable for earthed system, laying in trenches / duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 4 Core X 10 Square metre complete all as specified and as directed by Engineer-in-chage

Supply and lay cable protection pipe of HDPE double wall corrugated (DWC) including couplers, bends etc of size 50mm OD and ID 38 mm confirming to IS 14930 -II and ISI Marked all specified and as directed

Cutting the existing road/hard standing surfaces to a depth of 45 cm and 45 cm width and getting out for laying of GI Pipe for/returning filling with top 15 cm thick with PCC 1:3:6 Type C1 using 20 mm graded stone aggregate and finishing even and fair without using extra cement including disposal of surplus soil all as directed by Engineer in Charge

Supply and laying GI tube light grade of 40mm dia with all fittings for protection of U/G Cable laid in trenches all as per directed by Engr-in-Charge,

Priya construction

SK CONSTRUCTION

AMR TRADERS

T.THIYAGARAJAN

Hindustan Traders