SPECIAL REPAIRS TO BLDG NO P-29 (TECH SEC) AND BLDG NO T-21 (KOTE) AT OD COMPLEX UNDER GE (EAST) MATHURA

Taking down Chowkhats or frames not exc. 1.5 sq m each with shutters (without taking off shutters from the frames), complete all as specified & directed.

Taking down Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frames), complete all as specified & directed.

S & F Factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/chowkkat of size 45x85 mm comprising of virgin polymer of K value 58-60 (suspension grade), calcium caronate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mmiter joints after applying PVC solvent cement and screwed with full dody threaded star headed SS screws having minimum density of 650 kg/cum nd screw withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category of being termite / borer proof, water / moiture proof and fire retardant and fixed in positin with suitable MS hold fast /lugs/SS dash fasteners f required dia and length complete, all as per direction of engr-in-charge complete all as directed

S & F Factory made single extruded WPC (wood polymer composite) solid moulded flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium caronate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum nd screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , odulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category of being termite / borer proof, water / moiture proof and fire retardant and fixing with stainless steel butt hinges of required ie with necessary full body threaded star headed counter sunk SS screws, all as per direction of engr-in-charge complete all as directed

S&F factory made Pressed steel frame for doors of size 125 X 60 mm frabicated out & 1.25 mm thick sheet with one or more rebates including necessary fixing lungs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.

S&F factory made Pressed steel frame for doors of size 105 X 60 mm fabricated out & 1.25 mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.

M&L for 35 mm thick factory made flush shutters, solid core construction with block board core and plywood face panels, including 1mm thick laminated commercial type on both sides fixed with suitable adhesive, including provision of suitable blocks for taking mortice locks, latches or other fittings complete all as specified and directed.

S&F 35 mm thick factory made second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless steel wire staples, complete all as specified & directed.

S&F 100 mm long stainless steel hinge, type B-21, complete all as specified & directed.

S&F 200 mm long aluminium anodised barrel tower bolts of extruded sections, complete all as specified & directed.

S&F 150 mm long aluminium handles febricated type, complete all as specified & directed.

S&F 250 mm long aluminium alloy sliding door bolt , bolt type and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & directed.

S&F factory made steel windows with side hung shutters incl box type hinges with steel handles peg stays complete with glazing bars dovetailed or welded.

S&F factory made steel windows with side hung shutters incl box type hinges with steel handles peg stays complete without glazing bars dovetailed or welded.

Supply & fix 3mm thick sheet glass panes ordinary quality n.exc 0.50 sqm each fixed to steel frame complete oil putty in square including steel pin complete all as specified and directed

Supply & fix 3mm thick frosted ordinary quality n.exc 0.50 sqm each fixed to steel frame complete oil putty in square including steel pin complete all as specified and directed

M&L for Powder coated aluminium frame (minimum thickness of powder coating 50 micron) work for shutter of doors, windows, ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gask etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws complete all as specified and as directed.

M&L for Powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

M&L for Powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

S&F aluminium decogrill of approved design made out mesh size not exc 50mmx50mm fixed to the window frame with CP brass /stainless steel screws including cutting and fixed with f channel/u channel all as specified and directed

S & F aluminium extruded section door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed.

S&F 4.8 mm thick Sheet glass, ordinary quality and glazing fixed to aluminium/ Steel/ wooden frame with rubber beading/ putty/ wooden beading as required area exc 0.5 sq. m in each pane complete all as specified and directed.

M&L for anti termite treatment the soil along with internal wall and floor junction/external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, through approved applicator, as per manufcturer's instruction, complete all as specified and directed.

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and rubbish off the premishes.

M&L for Non skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM 1:4, complete, all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450x350x7 mm/450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 10mm thick screed plaster in cement mortar (1:4) complete all as specified & directed.

M&L for double charge vItrified tiles 10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0. 36 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1:4 a complete all as specified & directed.

M&L for vItrified tiles 10 mm thick (square/ rectagular) polished, area of each tiles not exceeding 0. 36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement motar 1:4 and finishing complete all as specified & directed.

Dismantling of ceiling boards of any type and any thickness including cover fillets and timber frame work complete.

M&L for 4 mm thick prepainted and designer type E-board in false ceiling (flat or sloping) fixed to and including powder coated MS snap grid frame size of grid 605 x 605 mm, 4 mm GI wire for hanging and including 10 mm wide disginer POP strip all round at the junction of wall and false ceiling complete all as specified and as directed by Engg.-in-charge.

M&L for 4 mm thick prepainted designer non-asbestos fibre cement building board and fixed on false ceiling grid with screws complete all as specified and as directed.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete.

M&L for Cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface,complete all as specified and as directed.

M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack.

M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand ofover the bond coat applied surfaces with cement mixed with admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat.

M&L for rendering 5 mm thick on concrete surfaces in RCC roof projections, ceiling ,sunsheds, beams, etc in cement mortar 1:3, finished even and smooth without using extra cement, complete all as specified & directed.

S&F in repair 8-10 mm thick hollow PVC wall lining single side prelam inclusive of solvent cement and fixing at site on including necessary frame work of 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall complete all as directed by Engr in charge.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar including removing rubbish out of the MoD land, complete all as specified & directed.

M&L for 18-20 mm thick Black granite stone as in cooking platforms , floor, window/door cill etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl rounding off corners, mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc .

M&L for Machine cut kota stone slab as in flooring / steps of stair case flooring 20-25 mm thick over and including 15 mm thick screed bed in CM 1: 4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified & directed.

M&L for Kota stone slab 18-20 mm thick in riser of steps, skirting, dado and including pillar laid over and including 10mm thick backing coat in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including making groove to curve skidness, rubbing and polishing complete all as specified & directed.

M&L for non skid heavy duty parking (ENDURA) tiles exc. 0.11 and n exc .0.18 Sqm 10mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish out side of MoD land, complete all as specified & directed.

M&L for 75 mm thick Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate laid in panels not exc 3 m and providing grooves at corner finished cement concrete surface even and fair without using extra cement as in plinth protection laid in panels, complete all as specified & directed.

Demolition of Brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete, all as specified & directed.

M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6, complete, all as specified & directed.

M&L for brickwork with fly ash, old size bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified & directed.

Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15 mm thick on other than fair faces of brick work or stone masonry surfaces in cement plaster 1:4 mixed with water proofing compound as per manufacturer's instruction, finished even and fair on wall surfaces, complete, all as specified and directed .

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for rendering 10 mm thick on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair complete, all as specified and directed

M&L rendering 10 mm thick on ceiling surfaces in cement mortar 1:3 finished even & fair complete all as specified and as directed.

M&L for three coats of white wash on ceiling including preparation of new plastered surfaces, complete all as specified and as directed.

M & L for preparation of new/old surface including complete removal and applying two coats of 100% premium acrylic exterior emulsion paint having VOC less than 50 gm/litre & excellent protection against UV, Alkali & Fungal resistance, exterior paint of required shade (Company Depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including 1-2 mm thick wall care putty and priming coat of exterior primer applied at 0.90 litre/10 Sqm over new surfaces upto tripple storey with fully utomatic airless spray machine of paint application having an electric motor of min 1 HP with a flow speed of min 1 ltr per min having pressure 3300 PSI. Allow 6-8 hours to dry the surface of both coat of paint to achieve excellent application with 5 years perfomance warranty from manufacturers and instruction complete using limited man power including scaffolding, trestles, ladders, cradles and necessary safety measures for upto triple storey buildings, complete all as specified and directed. Note : (a) Complete work to be executed by authorised applicator from paint manufacturer. (b) Primer and emulsion application to be carried out through air less spray machine or by roller (only mechanical application allowed except in paint application on bands/chajja & building edges/ borders/projections where contrasting colour as specified and directed is to be applied)

M & L for complete removal of existing surface /new plaster surface and applying two coat of Oil bound distemper over a coat of primer & over a coat of 2 mm thick wall care putty on old plastered surface using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr.The machine should should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shold be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide or zinc chrome primer complete all as specified & directed.

M&L for prepration of new wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Demolition of roof treatment any thickness including PCC , Mud phuska PCC padding, plastering , APP membrane complete treatment and in any position and removing the demolished material out of MoD land complete all as specified and directed.

M&L for 40 mm average thick PCC 1:2:4 type B0 (using 12.5mm grd stone agg) in floors/padding for levelling of roof surface and finishing the surface even and fair with out using extra cement, complete, all as specified and directed.

M&L for APP based polymeric membrane not less than 3 mm thick, weighing not less then 3 kg / Sqm, reinforeced with polyster non-woven fabric (weighing not less than 150 gm/sqm). It shall be laid by torch application. Side overlaps shall be 75 mm and the ends shall be 100 mm and all overlaps and jointed shall also be sealed by torch application. For parapets, membrane shall be taken to a height of minimum 60cm and then inserted inside the parapet in a groove and same shall be flashed by membrane flashing. Complete APP membrane (in roof/parapet surfaces) shall be laid over and including a coat of cold applied bituminous primer confirming to IS:3384 @ 0.40 Kg per Sqm, including laid over 15 mm thick plaster in concrete surface in CM 1 : 4 complete all as specified & directed.

M&L for cool roof SRI (Solar Reflective Index) tiles of 300 X 300 mm, 9/10 mm thick of approved Make of colour as approved by GE over and including 15 mm thick screed bed in CM 1:4, joints grouted and 5mm spacer and filled by pointed in CM (1:3) mixed with 5% crude oil by weight of cement. The tiles shall be laid either through authorised applicator who has laid the app memberane or by the contractor under the supervision of the authorised applicator of APP membrane.

Taking up or down steel tubing and connections, 15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections , 20 mm bore complete all as specified and directed.

Supplying and laying of 20 mm CPVC pipes outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S & F 20 mm bore of pipe GI medium grade steel tubes, galvanised with & including all fittings and fixed complete to walls and ceilings or laid in floors. complete all as specified and as directed.

Taking down rainwater/sewage pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified & directed.

S&F in repair 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as directed and as specified.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall incl necessary clamp etc. including demolition of old pipes complete all as directed and as specified.

S&F in repair 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as directed and as specified.

S&F in repair 110 mm dia PVC (SWR) bends any radius with oval access door complete all as directed and as specified.

S&F in repair 75 mm dia PVC (SWR) bends any radius complete all as directed and as specified.

S&F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal with acess door complete all as directed and as specified..

S&F in repair 75mm PVC floor trap plain with CP grating including jointing with solvent cement complete all as directed and as specified.

S&F 110 mm bore PVC vent cowl, complete all as specified and directed.

S&F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P' trap setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe & jointing to socket of flushing rim, complete all as specified and directed.

S&F in repair for counter sunk vitreous china wash hand basin of size 560 x 400 mm including waste coupling, CP Bottle trap and cutting and fixing in, complete all as specified and directed.

S&F in repair Vitreous China bowl urinal flat back, half stall type, white , of size 375x390x590 including CP spreader with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed.

S&F in repair bib taps long body cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, (Min wt - 450 gm) screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed.

S&F in repair two way bib taps long body cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, (Min wt - 450 gm) screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed.

S&F in repair Stop Valve/ angular cock cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, (Min wt - 450 gm) screwed down, screwed for 15 mm bore iron pipes complete all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan Rimless Single Piece EWC (Brand-I) Size: 395x710x730 mm, with UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set,etc complete, S Trap- 300 mm, complete all as specified and as directed.

S & F in repair Low level flushing cistern 09 Ltr capacity dual flush type complete with float valve, syphon assembly etc complete. The colour of the cistern shall be as matching with the colour of the WC Pan

S&F in repair stainless steel Hand jet health faucet 15 mm bore with CP flexible tube 1.20m long with all connected fittings complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated over head shower (150 x 150 mm) square shape with 600 mm long arm complete complete all as specified and as directed.

S&F in repair Pillar taps, (Min wt - 500 gm), fancy type, long body swan neck, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore dia iron pipe complete all as specified and as directed.

S&F in repair concealed stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of iron pipe or union and fixed complete all as directed.

S&f in repair Soap dish, of CP brass body and rectangular in shap fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repair curtain rod stainless steel chromium plated 22-25 mm dia with bracket knobs including decorative finials all as approved complete all as specified and directed.

M&L for taking down and refixing iron gate of size exc 2 sqm but n exc 5 sqm after making necessary repair including welding etc complete all as directed

S&F in repair chromium plated tubular towel rail 20 mm dia type 'D', 600mm long between flanges fixed to wall complete all as specified.

Supply & fixing PVC connection 15mm size best quality with PTMT nuts 450mm long.

Dismantling old water tanks exc 500 & n exc 1000ltrs capacity and removing all as directed

S&F 750 Litre capacity rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top), WHITE COLOUR, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & wash out pipe etc including required dia of GI pipe, complete as specified in SSR Part-I.

S&F in repair Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s .) all as specified & directed.

S&F in repair Gun metal, globe or gate valves 20 mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed all as specified

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including removing rubbish out of MoD land, complete all as specified & directed.

M&L for reinforced cement concret nominal mix, (using 20mm graded stone aggregate) as in slab supported on wall and shelves etc complete all as specified & directed.

M&L for MS TMT bars 10 mm dia and over, cut to length bent to shape required incl cranking bending ,spirally for hooping for column ,hooking ends and binding with and including MS wire annealed not less than 0.9mm dia, complete all as specified & directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified & directed.

Dismentling timber scantlings 40 sq cm and over in section, in any position

M&L for roof trusses (Framed) tubular hollow pipes crane gantries, rails and fastenings and heavy brackets framing (Hollow tubular section, beam, tee, angle, channel or flat section) FE-290 Gd-165 including distance pieces, cleats etc complete all as specified and directed

Dismantling asbestos cement (corrugated, semi-corrugated, etc., ) sheets in roof covering complete all as specified and directed by Engineer-in-Charge.

M&L for pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of sheet complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa (AZ-150) as in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with stainless steel bracket guard & railing 60cm long complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base, complete, all as specified and directed by Engr-In-Charge.

Supply and laying in repair 80mm thick factory made chamfered edge cement concrete interlocking paver block of M-35 grade confirming to IS 15658-2006 locally available with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over minimum 50 mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete, all as specified and directed by Engr-In-Charge.

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed. ( Note: Credit for above items should be made as per credit Schedule separately)

Taking down carefully by Submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer-in-Charge.

Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap incl all type of MCB and making good disturbed surface / wall as per existing complete all as specified and directed

M & L for Point wiring with One light/ fan/ exhaust fan point controlled by one way switch 5 amp and with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed FRLS cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med grade) and its all accessories complete concealed in wall / roof incl cutting & chases( making good all to the disturbed surfaces as per existing) and including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc and including earth wire of PVC insulated FRLS copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge.

All as per item No 116 but for One 3 pin 5 Amps socket point controlled by one way switch on same board.

All as per item No 116 but for One 3 pin 5 Amps socket point controlled by one way switch on independent board.

All as per item No. 116 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed .

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete all as specified.

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module all as specified.

Supply & Fixing Modular fan Regulator electronic step type 2M complete all as specified.

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete all as specified.

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete all as specified.

Supply and Fixing ceiling rose surface bakelite 65mm x 50mm three terminals complete all as specified.

S/F Modular White cover plate with frame,1 module

S/F Modular White cover plate with frame,3 module

S/F Modular White cover plate with frame,6 module

S/F Modular White cover plate with frame,8 module

S/F Modular Metal flush box 1/2 module

S/F Modular Metal flush box 3 module

S/F Modular Metal flush box 6 module

S/F Modular Metal flush box 8 module

Supply & fixing indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge.

Supply and fix LED T-5 Intergrated Batten PC housing extruded 2' light fittings 9W complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Enginee-in-Charge.

S&F in replacement of Recess mounting LED light fitting 2X2, Square shape 24W, 230V, complete with all accessories internally prewired and including connected up with twin core twisted flexible copper conductor cable with suitable sizes all as specified and directed. Make Surya /cromptom/bajaj

Supply and install of 30W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete all as specified.

M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description.

Taking down the ceiling fan/ Exhuast fan of any sweep carefully from its installed position, dismantling complete with down rod ,cleaning of all dust, applying grease for bearings, reassembling the fan and blades, keeping a side safely and hanging / refixing in position after spray ainting and connecting up including provision of 3 core twisted flexible copper conductor cable of 0.75 Sqmm from ceiling rose to connector of fan and testing on completion complete all as directed.

M & L for Sub Main Wiring with two runs single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 6 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.(Note: Two runs 6 Sq mm (P&N), one run of 6 Sq mm earth wire & One run of PVC conduit will measured as one RM).

Sub main wiring complete with 4 runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade multistranded copper conductor cable with 2 run of 4 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 25 mm or higher dia non metallic rigid PVC conduit and conduit accessories fixed on wall/Ceiling/Fixed to roof/truss etc all as specified and as directed.

S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted with Copper bus-bar 250Amp, two neutral bar, two earth bar with provision for 125Amps MCCB as incomer and SP/TP MCBs as outgonig, cable ties for cable management, 440 V, 8 way complete all as specified and directed. Note : -MCB & MCB /MCCB DBs shall be of same make and measured and paid seperately under respective items of Sch A. DB shall be fixed in Surface/ flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.

S&F MCB distribution board, TPN 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified.

S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified.

Supply and fix SP enclosure modular type, with a two pin and earth plug and socket complete with Single Pole MCB of rating 20-32 Amps, 240 Volts complete with all conction as directed.

Supply & fix S&F MCCB 4 pole 415 Volts, (Ics=100%Icu) Adjustable Thermal and fixed magnatic type 125 Amp, ' C' series , bracking cap 16KA, Complete all as spccified and directed

Supply & fix of MCB TPN 40 to 100 Amps,' C' series , bracking cap 10KA, 415V complete including taking down old MCBs all as specified and directed.

Supply & fix in replacement of MCB TP 40 -63 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed.

Supply & fix of MCB DP 40 -63 Amps,' C' series , bracking cap 10KA, 240V complete all as specified and directed.

Supply & fixing of MCB SP 6 - 32 Amps, ' B' series ,bracking cap 10KA, 240V complete all as specified and directed.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor of size 35 Sqmm 3.5 core laid in trenches / duct / fixing on walls / poles including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing complete all as specified and directed.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty LT 1100 volts grade cable with aluminium conductor of size 25 Sqmm 4 core laid in trenches / duct / fixing on walls / poles including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing complete all as specified and directed.

Excavation in soft / loose soil in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out complete.

Returning filling with earth obtained from excavation including spreading, levelling, watering and consolidation in layers not exceeding 25 cms thick complete.

Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete.

M&L for sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete.

Supplying and laying reinforced precast concrete cable cover class LV type 1 with flat size 250 mm x 150 mm x 40 mm complete all as directed.

S&F steel tubes medium grade galvanised with all fittings such as clamps, nuts and bolts, washers etc fixed to walls/ floors/ poles/ road crossing/hanging fan etc of following sizes 40mm dia bore complete all as directed:-

Earthing complete all shown as electrical plate No -03 of MES Sch part -I as specified and as directed including the following:- (i) GI earth plate of size 60x 60cm x6.0mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metres below ground level. (ii) Earth plate surrounded by and packed with charcoal and common salt in alternative layers. ( n.exc 15 cms each layer) (iii) 4 mm GI wire from earth plate to MCB DB/machinery incl necessary GI bolts, nuts check , washers, thimbles etc. (iv) 20 mm bore, light grade, Gi pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit. (v) 15 mm dia bore G. I. medium grade pipe for protection of earth wire. (vi) Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded stone aggregate. The chamber shall be constructed one metre away from edge of earth pit. (vii) 50 mm thick precast cover of reinforced cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate with steel rainforcement 8 mm dia mild steel TMT bar @ 10 Cm c/c both ways and MS angle iron 50x50x6mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces with suitable handle to lift the cover. (viii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance of 50 m as directed.