Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.8 LAccepted-AOC 158 ARATH BAZAR KASAULI 173204 HP | KASAULI | SOLAN | HIMACHAL PRADESH | 173204 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹34.2 L+₹12,402 (0.36%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹36.3 L+₹2.2 L (6.38%)Rejected-AOC 3838 2ND FLOOR SECTOR 46 C CHANDIGARH UT 160047 | CHANDIGARH | CHANDIGARH | CHANDIGARH | 160047 | L3 | Rejected-AOC Other than lowest bidder |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sh. Jayraj Mohanta, AE (Civ), Offg Garrison Engine
GARRISON ENGINEER KASAULI, DISTT SOLAN (HP) PIN 173204 PH 01792273107
REPAIR/ REPLACEMENT OF DISTRIBUTION PIPE LINES DI/CI/ GI OF VARIOUS SIZES INCLUDING FITTINGS AND CERTAIN OTHER WORKS AT MD ACCN AREA AT DAGSHAI UNDER GE KASAULI
2023_MES_585964_2
GEK-110/2022-23
Open Tender
Pipes and Pipe related activities
Item Rate
180 days
DAGSHAI UNDER GE KASAULI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE KASAULI
₹88,000
Yes
15 Jun 2023
6 May 2023
3 Jun 2023
6 May 2023
27 May 2023
13 May 2023
Amount
Schedule 'A' Section - I
Excavation in trenches hard/dence not exc 1.5 mtr wide and not exc 1.5 mtr in depth (for taking up or laying of pipes/cables) and getting out and forming bottom surface to gradient complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.
Removing excavated surplus soils to a distance n.exc 50 mm and deposited at a level n.exc 1.5 m above the starting point complete all as specified and as directed.
Dismantling and taking out old u/s worn out MS/CI/GI pipe line flanged type 100 mm bore including fittings complete with nuts, bolts, washers and gaskets etc and removing from the site complete all as specified and as directed by Engineer-in-charge. Note:- New pipes shall be laid first at spring area and old ones to be taken out later.
M&L steel water tubing galvanised 100 mm bore medium grade in trenches/under roads/ floors etc incl,tee, bend , union , flange and all fittings complete all as specified and as directed.
Supply and Fixing MS flange for 100 mm bore pipes, of size internal dia 120 mm ,outer dia 230 mm outer and 20 mm thick and having 8 holes drilled for and incl 8 Nos 15 mm dia ,75mm long Nut ,bolts, 2 nos washer incl 3 mm thick gasket of required size and shape complete for jointing with the pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified. and directed.
Material & labour for flanged joint for 100 mm bore pipes including compressed asbestos fiber gasket 3 mm thick and 8 Nos nuts, bolts of size 15 mm dia and 75 mm length with 2 Nos washers 3 mm thick to joint pipes/fittings/bends etc complete all as specified.
Dismantling and taking out old u/s worn out MS/CI/GI pipe line flanged type 80 mm bore including fittings complete with nuts, bolts, washers and gaskets etc and removing from the site complete all as specified and as directed by Engineer-in-charge. Note:- New pipes shall be laid first at spring area and old ones to be taken out later.
M&L steel water tubing galvanised 80 mm bore medium grade in trenches/under roads/floors etc incl,tee, bend , union , flange and all fittings complete all as specified and as directed.
Supply & Fixing MS flange for 80 mm bore pipes, of size internal dia 90 mm ,outer dia 20 mm outer and 20 mm thick and having 6 holes drilled for and incl 6 Nos 15 mm dia ,75mm long Nut ,bolts, 2 nos washer incl 3 mm thick gasket of required size and shape complete for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified. and directed.
Material & labour for flanged joint for 80 mm bore pipes including compressed asbestos fiber gasket 3 mm thick and 8 Nos nuts, bolts of size 10 mm dia and 75mm length with 2 Nos washers 3 mm thick to joint pipes/fittings/bends etc complete all as specified.
M&L steel water tubing galvanised 50 mm bore medium grade in trenches/under roads/floors etc incl,tee, bend , union , flange and all fittings including taking up or down 50mm bore steel water tubing pipe removing from site complete all as specified and as directed.
All as per item No- 12.00 herein before but size of pipe 40 mm bore complete all as specified and as directed.
All as per item No - 12.00 herein before but size of pipe 25 mm bore complete all as specified and as directed.
All as per item No - 12.00 herein before but size of pipe 20 mm bore complete all as specified and as directed.
All as per item No - 12.00 herein before but size of pipe 15 mm bore complete all as specified and as directed.
Supply and fix in repairs gun metal gate valve 50 mm bore with iron wheel head screwed both ends for iron pipes and fixed complete in existing location complete all as specified and directed.
All as per item No 17.00 here-in-before but for 40 mm bore pipe complete all as specified and as directed.
All as per item No 17.00 here-in-before but for 25 mm bore pipe complete all as specified and as directed.
All as per item No 17.00 here-in-before but for 20 mm bore pipe complete all as specified and as directed.
All as per item No 17.00 here-in-before but for 15 mm bore pipe complete all as specified and as directed.
Dismantling and taking out old u/s worn out MS/CI/GI pipe line flanged type 150 mm bore including fittings complete with nuts, bolts, washers and gaskets etc and removing from the site complete all as specified and as directed by Engineer-in-charge. Note:- New pipes shall be laid first at spring area and old ones to be taken out later.
Supplying, laying, jointing and testing hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-150 mm, outer dia 168.30 mm, with nominal wall thickness 7.11 mm and weight 28.26 Kg/ mtr, including short pieces as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge. NOTE:- (i) Excavation Earth work, PCC, seamless pipe fittings, MS flanges & flanged joints shall measured and paid for separatly under relevant items. (ii) Work will be carried out in piecemeal loacations experienced based on break downs and weaker sections of existing rising main as per site requirement and as directed by Engineer-in-charge. (iii) Any other expenses including permision from state authorities are included under this item.
Supply only MS Flange of inner dia 150 mm and 305 mm outer dia of thickness 28.57 mm having 8 holes drilled for and incl 8 Nos 19.05mm dia ,100mm long Nut ,bolts, 2 nos washer incl 3 mm thick gasket of required size and shapecomplete for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified. and directed.
Material & labour for flanged joint for 150 mm bore pipes including compressed asbestos fiber gasket 3 mm thick and 8 Nos nuts, bolts of size 19.05 mm dia and 100 mm length with 2 Nos washers 3 mm thick to joint pipes/fittings/bends etc complete all as specified.
Dismantling and taking out old u/s worn out MS pipe line flanged type 200 mm bore including fittings complete with nuts, bolts, washers and gaskets etc complete all as specified and directed. (Note : New pipes shall be laid first and old ones to be taken out later.
Supplying, laying, jointing and testing hot finished seamless carbon steel pipe not less than YST-240, grade B as per ASTM A 106, Sch 40, nominal size NPS-200 mm, outer dia 219.10 mm, with nominal wall thickness 8.18 mm and weight 42.55 Kg/mtr, including short pieces as required at site, laid in trenches/over RCC pillars/across or under bridges/along hill side (up or down)/culverts/inside valve pits complete all as specified and directed by Engr-in-charge. NOTE:- (i) Excavation Earth work, PCC, seamless pipe fittings, MS flanges & flanged joints shall measured and paid for separatly under relevant items. (ii) Work will be carried out in piecemeal loacations experienced based on break downs and weaker sections of existing rising main as per site requirement and as directed by Engineer-in-charge. (iii) Any other expenses including permision from state authorities are included under this item.
Supplying and fixing heavy duty pipe fittings such as MS bends of any angle made out of mild steel black pipe Schedule - 40, type - IS:3183 of 2007 / ASTM-A-106 Gr.'B' nominal bore 200 mm, outer dia 219.10 mm, with wall thickness 8.18 mm,complete all as specified and directed. Note :- excavation, earthwork, MS flanges and flange joints shall be measured and paid for separately under relevant items.
Supply only heavy grade MS flange of size 200 mm bore, 45mm thick and 400 mm outer dia having 12 holes drilled for 25 mm dia bolts for jointing with the existing pipes, duly welded with pipes/fittings bends properly to both the plain ends complete all as specified and directed.
Material & labour for flanged joint for 200 mm bore pipes including compressed asbestos fiber gasket 3 mm thick and 12 Nos nuts, bolts of size 25 mm dia and 150 mm length with 2 Nos washers 3 mm thick to joint pipes/fittings/bends etc complete all as specified.
Taking down unserviceable sluice valve from existing position and supply and fixing Gear operated D.I. Sluice valve of 200mm dia bore, D.I. resilient (soft) seated gate valve with pocket less body, SS Stem (AISI 410), EPDM coated DI wedge 100% vaccum tight design with toroidal sealing rings & over 250 micron epoxy coating in PN 16 designed to BS:5163/IS: 14846 Non-Rising stem type with gear wheel operation with including necessary arc/gas welding with flange as per existing pipe line , tail pics of MS Pipe as per site requirement not less than 350mm length, dia of tail peace as per existing pipe ,stainless steel spindle of suitable length including suitable size nuts, bolts, washer and rubber gasket all as required and directed at site.
All as per Srl No 31.00 but for sluice valve size 150mm dia bore complete all as specified and directed.
All as per Srl No 31.00 but for sluice valve size 100mm dia bore complete all as specified and directed.
All as per Srl No 31.00 but for sluice valve size 80mm dia bore complete all as specified and directed.
Supplying, fixing and testing of high pressure, heavy duty ball type cast steel Non return valve/ check valve, nominal size DN-150 mm, PN 10, conforming to BS 1868, Class 600, suitable to hydrostatic test pressure for body 156 kg/sq cm & for seat 115 kg/sq cm, both ends flanged in existing line, after removal of old unserviceable non return valve without damaging to existing pipe line complete all as specified and directed by Engr-in-charge. Note : Suitable size MS flanges for existing pipe line, Joints and jointing materials shall be included under this item.
Supply and fixing Non Return valve heavy duty cast iron of 100 mm nominal bore, , both ends flanged (size of flanges 300 mm x 40 mm with 12 holes for 25 mm dia bolts). complete all as specified and directed. Note :- Rate deemed to be included for joints with 125 mm x 25 mm bolts, nuts, washers and 3 mm thick fibre gaskets complete.
Supply and fixing Non Return valve heavy duty cast iron of 80 mm nominal bore, , both ends flanged (size of flanges 300 mm x 40 mm with 12 holes for 25 mm dia bolts). complete all as specified and directed. Note :- Rate deemed to be included for joints with 125 mm x 25 mm bolts, nuts, washers and 3 mm thick fibre gaskets complete.
M & L for Cutting down leaking piece of pipe 100mm. Cut down the rusted & leaking portion , providing (i) new piece of GI pipe 100 mm medium grade upto 0.50 metre long (ii) New union socket 100 mm - 1 Nos. (iii) Jointing the new pipe with existing old pipe by means of welding to make it leakproof including testing on completion complete all as specified and directed. Note:- Unit rate quoted shall be included for (a) Necessary excavation/earth work (b) New GI pipe 100 mm upto 0.50 metre length (c) union & socket 100mm - 1 Nos each. (d) welding etc complete including testing on complete.
M & L for Cutting down leaking piece of pipe 80mm. Cut down the rusted & leaking portion , providing (i) new piece of GI pipe 80 mm medium grade upto 0.50 metre long (ii) New union socket 80 mm - 1 Nos. (iii) Jointing the new pipe with existing old pipe by means of welding to make it leakproof including testing on completion complete all as specified and directed. Note:- Unit rate quoted shall be included for (a) Necessary excavation/earth work (b) New GI pipe 80 mm upto 0.50 metre length (c) union & socket 80mm - 1 Nos each. (d) welding etc complete including testing on complete.
M & L for Cutting down leaking piece of pipe 50mm. Cut down the rusted & leaking portion , providing (i) new piece of GI pipe 50 mm medium grade upto 0.50 metre long (ii) New union socket 50 mm - 1 Nos. (iii) Jointing the new pipe with existing old pipe by means of welding to make it leakproof including testing on completion complete all as specified and directed. Note:- Unit rate quoted shall be included for (a) Necessary excavation/earth work (b) New GI pipe 50 mm upto 0.50 metre length (c ) union & socket 50mm - 1 Nos each. (d) welding etc complete including testing on completion.
M & L for Cutting down leaking piece of pipe 40mm. Cut down the rusted & leaking portion , providing (i) new piece of GI pipe 40 mm medium grade upto 0.50 metre long (ii) New union socket 40 mm - 1 Nos. (iii) Jointing the new pipe with existing old pipe by means of welding to make it leakproof including testing on completion complete all as specified and directed. Note:- Unit rate quoted shall be included for (a) Necessary excavation/earth work (b) New GI pipe 40 mm upto 0.50 metre length (c) union socket 40mm - 1 Nos. (d) welding etc complete including testing on completion.
M & L for Cutting down leaking piece of pipe 25mm. Cut down the rusted & leaking portion , providing (i) new piece of GI pipe 25 mm medium grade upto 0.50 metre long (ii) New union socket 25 mm - 1 Nos. (iii) Jointing the new pipe with existing old pipe by means of welding to make it leakproof including testing on completion complete all as specified and directed. Note:- Unit rate quoted shall be included for (a) Necessary excavation/earth work (b) New GI pipe 25 mm upto 0.50 metre length (c) union socket 25mm - 1 Nos. (d) welding etc complete including testing on complete.
M & L for Cutting down leaking piece of pipe 20mm. Cut down the rusted & leaking portion , providing (i) new piece of GI pipe 20 mm medium grade upto 0.50 metre long (ii) New union socket 20 mm - 1 Nos. (iii) Jointing the new pipe with existing old pipe by means of welding to make it leakproof including testing on completion complete all as specified and directed. Note:- Unit rate quoted shall be included for (a) Necessary excavation/earth work (b) New GI pipe 20 mm upto 0.50 metre length (c) union socket & 20mm - 1 Nos each. (d) welding etc complete including testing on complete.
S&F in repair 3 layer Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltr incl all connected accessories complete all as specified & directed by Engr-in-Charge.
S&F in repair 15mm dia bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule incl nipple,union & socket of required size and fixed complete all as specified & directed by Engr-in-Charge.
S&F in repair 20mm dia bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule incl nipple,union & socket of required size and fixed complete all as specified & directed by Engr-in-Charge.
Supply only rubber bush/ star coupler for 25 / 40 HP pump coupling complete all as specified.
Amount of credit of Rs. 228066.00 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.
Ayushmat Contractors
naina devi constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .