ADDITION/ ALTERATION TO TOILET BLOCK NEAR GENERAL WARD AT MH KAMPTEE.

Amount

(A) BUILDING

Excavation in trenches n exc 1.50m wide and n exc 1.50m in depth for foundation etc., n.exc 10 sqm on plan and not exc 1.50m in depth and getting out in soft/ loose soil all as specified and directed.

Excavation in trenches n exc 1.50m wide and n exc 3.00 m in depth for foundation etc., n.exc 10 sqm on plan and not exc 1.50m in depth and getting out in soft/ loose soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil, complete all as specified and directed.

Removing excavated material (soil) n .exc 50m and deposited where directed at a level n exc. 1.5m above the strating point complete all as specified and directed.

Material and labour for providing cement concrete 1:4:8 type D2 (Using 40mm graded stone aggregate) in foundation, mass concrete and filiings, complete all as specified and directed.

Material and labour for Use and waste of formwork to sides of concrete foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc. for a rough finished surface of concrete,all as specified & directed.

All as per itm no. 1.06 hereinbefore but to sides of columns, pillars, piers, posts and struts etc., all as specified and as directed.

All as per itm no. 1.06 hereinbefore but to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and simillar work, complete all as specified and directed.

All as per itm no. 1.06 hereinbefore but to the soffits of suspended slabs such as roof slabs, floor slabs, landing horizontal or slopping, and similar works not exc 200mm thick flat & with fair finished surfaces of concrete etc., complete all as specified and as directed.

All as per itm no. 1.06 hereinbefore but to chullah hoods, chajjas, troughs and similar items including edges and simillar work, complete all as specified and directed.

All as per itm no. 1.06 hereinbefore but to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide, complete all as specified and directed.

Material and labour for reinforced cement concrete M-25 (Design mix) using 20 mm graded stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc., all as specified and as directed.

All as per itm no. 1.12 hereinbefore but in columns, pillars, piers, posts and struts etc., all as specified and as directed.

All as per itm no. 1.12 hereinbefore but in Beams, cantilevers, ressummers, lintels over 1.5m span concrete etc., complete all as specified and directed.

All as per itm no. 1.12 hereinbefore but in chajja etc., complete all as specified and directed.

All as per itm no. 1.12 hereinbefore but in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Material and labour Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement, complete all as specified and as directed.

All as per item No.1.17 herein before, but 8 to 10 mm dia TMT bars as in stirrups, spacers and binders, complete all as specified and as directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 (Using old size brick) complete all as specified and as directed.

Material and labour for brick work with fly ash brick, straight or curved on plan to any radius built in half brick thick wall built in CM 1:4 (Using old size brick) complete all as specified and directed.

Material and labour for Rendering 15 mm thick in CM 1:4 by using water proofing liquid compound as per manufacturer instructions on brick or concrete surfaces and finishing surfaces even & smooth without using extra cement. complete all as specified and as directed. Note: Water proofing liquid compound shall be measured and paid separately under respective item.

Material and labour for Rendering 10 mm thick in CM 1:6 on fair faces of brick masonry or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed.

Supply only Liquid water proofing compound of approved quality, complete all as specified and directed.

Material & labour for rendering 5mm thick in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour for preparation of newly plastered surface on wall and applying two coats of distemper oil emulsion over a coat of primer over one coat of wall care putty of not less than 2.0 mm thick including preparation of surfaces complete all as specified and directed.

Material and labour for applying three coats of white wash over newly plastered surface of ceiling including preparation of surfaces complete all as specified and as directed.

Material & labour for prepration of plaster surfaces of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.

Material and labour for Moorum / red bajri brought from outside MD land as in filling under floors / pavings / berms, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and directed.

Material and labour for hardcore of gauge not exc 63 mm, broken stones or boulders deposited, spread and levelled in layers not exc. 15 cm thick, watered & rammed to a true surface complete all as specified and as directed.

Material and labour for 75mm thick PCC 1:4:8, type D-2 using 40 mm graded stone aggregate as in sub base of floor and similar location all as specified and as directed.

Material and labour for 25mm thick cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in sub base of floor and similar location all as specified and as directed.

Material and labour for non-skid ceramic coloured tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.11 sqm but not exc. 0.18sqm , laid in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including cement mortar screed of 15mm thick in CM 1:6 all as specified and directed.

Material and labour for glazed ceramic coloured tiles (digital printed design) of size 450x350x7 mm on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and over and including 10 mm thick screed bed in CM 1:4 all as specified and directed.

Material and labour for 75mm thick PCC 1:3:6 mix type C2 using 20 mm graded stone aggregate as in plinth protection and surface to be finished fair and even including joints at every 2.5 m and at all corners filled with 85/25 grade bitumen and sand mixed in 1:2 ratio by weight complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supplying & fixing in opening as per specification & drawing all as specified and as directed.

Supply and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

Supply and fixing 100mm long stainless steel butt hinges, complete all as specified and directed.

Supply & fix 125 mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.

Supply & fix 100 mm long aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

Material and labour for aluminium alloy, anodised, 250mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.

Supply and fixing powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and directed.

Supply and fixing powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed/sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,hardware, etc., complete all as specified and directed.

Supply and fixing sheet glass ordinary quality, 4 mm thick and glazing with oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and as directed.

Material and labour for 4.0 mm thick frosted sheet glass ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each panes, complete all as specified and directed.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

Material and labour for cleaning the newly plastered surfaces of roof slab, Chajja, canopy, parapet etc., thoroughly with wire brushes and providing water proofing treatment , complete all as specified and directed here in after :- (a) Bituminous primer @ 0.30liter per sqm conforming to IS 3384-1986 (b) 3mm thick approved APP polymeric membrane minimum weighing 3 Kg/Sqm (one layer) laid by torch application method with over laps of 100 mm joints on traverse direction and 75 mm at longitudinal direction duly thermofused by flame torch all as specified in application manuel of the company (c) Painting with one coat of bitumin grade 85/25 @ 1.2 Kg/Sqm. (d) Applying two coats of aluminium paint @ 100ml/Sqm (e) 15mm thick cement plaster in CM 1:4 with WPC and two coat of aluminium paint of 0.2Kg/Sqm over membrane.

Supply and fix brass chromium plated tubular towel rail D type 20mm dia 600 mm long between flanges including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.

Supply & fixed in repairs wall mounted vitreous china wash down water closet 'P' trap round of size 620 x 360 x 780 mm along with soft close seat cover and twin flush ( Aquafier EWC P trap) white colour with all fittings including joining mild steel CP or aluminimised hinging device, complete all as specified and directed. Make: Prayag cat No 4125 or equivalent of Hindware/Cera/Jaguar or as specified in make list.

Supply and fixing in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC Flush pipe complete including jointing to socket of flushing rim, etc, complete all as specified and directed.

Supply & fix PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed.

Supply and fixing in repair Wash Basin oval type (56x41cm),including Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed, complete all as specified and directed. Make: Hindware CAT No. F-10017 or equivalent or as specified in make list.

Material and labour for 20 mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills, cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15 mm thick cement screed/rendering in CM 1:4 including roughening surfaces of old/new concrete floor/wall by picking, sweeping clean and washing down with water to remove dust etc., and brushing neat cement slurry with 3.00 kg per sqm all as specified and directed.

Material and labour for rotational moulded polyethylene water storage tanks 5000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 25 mm dia ball brass valve with polythene float dismantling the old one complete all as specified and directed .

Supply and fixing ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 25mm dia, complete all as specified and directed.

Supply and fixing in repair wall mixer, 3 in 1 system (Provn for OH shower and hand shower), complete all as specified and directed. Make:- Prayag cat part No 6580 or equivalent or as specified in make list.

Supply and fixing in repair CP bib cock two way double handle with flange 15 mm dia screwd for iron pipe or for brass ferrule and fixed , complete all as specified and directed. Make : Prayag cat No 6512 or equivalent

Supply & fix in repairs stop valves/angle cocks, 15 mm bore, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fancy type, chromium plated with long shank and cup (concealed type)and fixed all as specified and as directed.

Supply and fixing in repair Two way angle cock fancy type chromium plated, screwed down, high presure with cruntch or butterfly handle screwed both ends for iron pipe of 15mm bore pipe, complete all as specified and directed. Make : Prayag cat No 6811 or equivalent

Material and labour 15mm GI tubing 'Medium grade' with all fiting and fixed complete to wall and celing or laid in floor including taking up or down steel tubing and connections, complete all as specified and directed.

All as per item Sr No.1.59 herein before, but 20mm bore complete all as specifed and directed.

All as per item Sr No.1.59 herein before, but 25mm bore complete all as specifed and directed.

All as per item Sr No.1.59 herein before, but 32mm bore complete all as specifed and directed.

All as per item Sr No.1.59 herein before, but 40mm bore complete all as specifed and directed.

Supply only pillar cock, Swan neck central hole basin mixer with hot/cold connection without pop up waste system, complete all as specified and directed. Make:- Prayag Cat part No 8750 or equivalent or as specified in make list.

Supply and fixing in repair Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe,with bottle trap, CP grating and Union for discharge pipe, complete all as specified and directed.

Supply and fixing 15 mm bore CP Urinal spreader for urinals, complete all as specified and directed.

Supply and fixing toilet paper holder , complete all as specified and directed. Make:- Prayag Cat part No BA-48 or equivalent.

Supply and fixing health faucet (ABS) with 1 Mtr tube & hook of 15 mm bore brass cromium plated including PVC pipe to connection GI tubing 15 mm bore , complete all as specified and directed. (Make: Prayag cat no BEA-40 or equivalent.

Supply and fixing for Soap dish, CP 125mm size fixed to plugs with chromium plated brass screws , complete all as specified and directed.

Supply and fixing SS Soap dispenser bottle fixed to plugs with chromium plated brass screws , complete all as specified and directed. (Make: Prayag cat no BEA-20 or equivalent.

Supply and fixing glass shelf 500x125mm with brass brackets , complete all as specified and directed. Make:- Prayag Cat No BEA-45 or equivalent.

Supply and fixing corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with brass bracket guard and railing , complete all as specified and directed. Make:- Prayag Cat No BEA 44 or equivalent.

Supply and fix in repairs 40 mm bore of pipe Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceiling or in floors etc. all as specified and as directed.

Supply & fix PVC (SWR) floor trap diameter of outlet in 75 mm with grating including jointing to waste pipe fixed in cement concrete including jointing with solvent cement all as specified and as directed.

Supply and fixing PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.

Supply and fixing 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart, complete all as specified and directed.

All as per item Sr No.1.77 herein before, but 75 mm bore complete all as specifed and directed.

Supply and fixing CP grating of size 100mm dia, complete all as specified and directed.

Supply and fixing 110mm PVC (SWR) bends any radius with oval access door, complete all as specified and directed.

All as per item Sr No.1.79 herein before, but 75 mm bore complete all as specifed and directed.

Supply and fixing 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.

All as per item Sr No.1.81 herein before, but 75 mm bore complete all as specifed and directed.

Supply and fixing PVC cowl slotted vent cowl 110 mm size, complete all as specified and directed.

Material and labour precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves and similar articles with plain faces and set in CM 1:6 . (reinforcement measured and paid sepratly), complete all as specified and directed.

Supply and fixing 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed in Aluminium doors,etc., complete all as specified and directed.

Supply and fixing in Continuous (piano) hinges, SS, bright finish with 30 mm width of flaps (When open), complete all as specified and directed.

Supply and fixing in Hasp & staple, SS including bolt to hinge plate with screws 75mm size, complete all as specified and directed.

Dismantling Asbestos cement (corrugated, semi corrugated etc.,) in roof coverings including ridges complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m, complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame ) exc. 1.5 sqm but n.exc. 4.0 sqm each complete all as specified and as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame ) n.exc. 1.5 sqm each complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

Dismantling water tank of capacity exc 1000 ltr & not exc 2000 ltrs and removing to store of any description, complete all as specified and directed.

Material & labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good cutting not exc 10 cm girth in brick/ stone walls complete all as specified and as directed.

Dismantling cast iron work of any description, complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as specified and directed.

Dismantling framed trusses (steel) of span n exc 10m, complete all as specified and directed.

Removing building materials etc. (other than spoil) to a distance of 5KM, including loading, unloading and stacking at the destination , complete all as specified and directed.

(B) SEWAGE: NOTE :- Items of earthwork such as returning filling , removing, Hardcore & PCC (1:4:8),RCC M-25, formwork to slab, Brickwork, external plaster, Water proofing compound & reinforcement shall be measured under relevant items here-in-before.

Surface dressing not exceeding 15 cm deep in soft/loose soil ,removal of shurbs ,vegetation ,tree roots if any ,getting out and removal to a distance not exceeding 50 mtrs , complete all as specified and directed.

Excavation in over area in soft/loose soil not exceeding 1.50 metre deep for foundations pipe line etc or for shafts, wells, cesspits, manholes, pier holes etc and getting out , complete all as specified and directed.

All as per Item No. 2.02 hereinbefore but of depth exceeding 1.5 metre and not exceeding 3 metre.

All as per Item No. 2.02 hereinbefore but of depth exceeding 3 metre and not exceeding 4.5 metre.

Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for foundations pipe line etc or for shafts, wells, cesspits, manholes, pier holes etc and not exc 10 sqm on plan and not exceeding 1.50 metre in depth and getting out , complete all as specified and directed.

Material and labour Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells , complete all as specified and directed.

Material and labour for 100 mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) as in floor , complete all as specified and directed.

Material and labour for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:4 , complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:6, mixed with water proofing compound, on brick work/concrete surfaces masonary, even and smooth finish withour using extra cement , complete all as specified and directed. Note: Water proofing compound measured separetely as supply only.

Material and labour for 25mm thick cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in coping and similar work etc including weathering, slightly rounded or chamfered angles and throating and provision of necessary formwork , complete all as specified and directed.

Material and labour for precast reinforced cement concrete 1:11/2:3 type A-1 (nominal mix) (using 20 mm graded stone aggregate) as in manhole cover slab and baffle wall etc, set in cm (1:4), including provision of necessary formwork , complete all as specified and directed. Note : Reinforcement shall be measured and paid for separately.

Mild steel work of Gde Fe-290 (Gde E-165) as in band, straps, rungs, handles ,hold fasts,manhole cover frame and similar small articles , complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in surface channels and drains , complete all as specified and directed.

Extra for forming fair finished drain or channel of manholes inner girth not exceeding 30cm in cement concrete using extra cement including forms, mould mitered stopped ends etc , complete all as specified and directed.

Add or deduct from above ser item No 2.14 as above for each 25mm girth of part of thereof over 30cm, complete all as specified and directed.

Preparation of new or previously untreated steel & iron surfaces of any description over 10cm in width or girth and applying two coats of synthetic enemel paint over a coat of red oxide primer , complete all as specified and directed.

Material and labour for plain cement concrete 1:4:8 type D2 (Using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 200 mm bore , complete all as specified and directed.

Reinforced concrete NP2 drain pipe, 200 mm internal dia laid in trenches on concrete bed and jointed, complete all as specified. (excavation, earth work and concrete bed and haunching shall be measured and paid for separately) , complete all as specified and directed.

Material and labour for asbestos cement pipe 100 mm dia in any length fixed with cement joints as vertical vent pipe in ST , complete all as specified and directed.

Material and labour for asbestos cement cone cap cowl for 100 mm dia pipe fixed with cement joints , complete all as specified and directed.

Use and waste of formwork to edges of concrete flats,treads,breaks in floors,window cills ,RCC bands in walls horizontal or sloping and similar work not exceeding 10 cm wide rough finished , complete all as specified and directed.

Cutting in to existing manhole for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required (200 mm) bore , complete all as specified and directed.

(C) ELECTRICAL WORK:

Taking down unserviceable point wiring with copper/aluminium conductor cable of (light, fan, plug and power plug point) complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fittings, regulator etc, and making good disturbed surfaces of walls/floor etc to match with existing surfaces including white/ colour washing/ distempering , complete all as specified and directed.

Taking down carefully unserviceable sub main wiring of any size/capacity and making good disturbed surfaces to match with the existing surfaces complete all as specified and as directed.

Taking down old unserviceable sheet metal enclosure with MCB's ,main switch, etc., and making good the disturbed surfaces of wall , complete all as specified and directed.

Material and labour for concealed point wiring 1100 volt grade single core PVC FRLSH insulated and unsheathed cable with multi-stranded copper conductor 1.50 Sqmm drawn in with and including electrical grade PVC conduit not less than 20 mm dia with IS 9537 (Part-III) 1983 marking, medium grade concealed in wall/ceiling as per site requirement including PVC FRLSH insulated and unsheathed cable with copper conductor of size 1.50 Sqmm as earth conductor and pressed steel modular boxes sunk on wall for mounting modular switches, switch sockets, fan regulator, etc including modular cover with frame of any size, including making good the disturbed surfaces complete all as specified and as directed for:- (a) One light point controlled by one, one way switch for spot lights including cable. Note: Cost of cable provided from submain DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

Material and labour for concealed point wiring 1100 volt grade single core PVC FRLSH insulated and unsheathed cable with multi-stranded copper conductor 1.50 Sqmm drawn in with and including electrical grade PVC conduit not less than 20 mm dia with IS 9537 (Part-III) 1983 marking, medium grade concealed in wall/ceiling as per site requirement including PVC FRLSH insulated and unsheathed cable with copper conductor of size 1.50 Sqmm as earth conductor and pressed steel modular boxes sunk on wall for mounting modular switches, switch sockets, fan regulator, etc including modular cover with frame of any size, including making good the disturbed surfaces complete all as specified and as directed for:- (b) One Ceiling/Exhaust fan point controlled by one, one way switch and regulator. Note: Cost of cable provided from submain DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit of suitable dia (minimum 20 mm) medium grade concealed in wall of the following sizes :- (a) 2 x 4.0 Sqmm with earth wire of 1 x 4.0 Sqmm. Note: (i) Accessories for point / sub main wiring like PVC junction box, bend, Tee, Elbow shall be of same make. (ii) Two runs of current carrying conductor and one run of earth conductor alongwith PVC conduit shall be measured as one unit.

Supply and fix ceiling rose of 3 phase/PVC/ polycarbonate, two or three terminals, surface type, complete all as specified and as directed.

Supply and fixing modular switch 1 way, 6 Amps, 1 Module, complete all as specified and as directed.

Supply and fixing modular switch 1 way 16 Amps, 1 Module, complete all as specified and as directed.

Supply and fixing modular socket 6/16 Amps , 2/3 pin combined 2 Module, complete all as specified and as directed.

Supply and fixing LED lights fittings 1 X 20 Watt, 250 V, AC decorative box type with draver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply and fixing building security light LED 25 Watt with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz, with and including mounting GI pipe (made out of 25mm dia light grade pipe) 0.8 m bent to the required shape fixing with FI clamps nut bolts etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size of 230V, 50Hz from fitting to ceiling rose, complete all as specified and as directed.

Supply and fixing LED light fitting 9/10 W bulk head luminaries including LED light driver holder connecting upto with three core twisted flexible cable suitable size of 230V, 50Hz complete all as specified and as directed.

Supply and fixing LED batten fittings 10/11 Watts, 2' length including drivers having energy consumption, 230 Volts, 50Hz, 6500K, not less than 800 Lumen prewired complete with all accessories and including LED tube rod, complete all as specified and as directed.

Supply and fixing sheet metal enclosure SPN for 240 Volts 8 way with 200 Amp rated bus bar flush/ surafce mounting double door,complete all as specified and as directed.

Supply and fix MCB SP 6 to 40 Amps 240 volts breaking capacity10 KA complete all as specified and as directed

Supply and fix MCB SPN 16 to 40 Amps 240 volts breaking capacity10 KA complete all as specified and as directed.

Supply & fix MCCB four pole 415 volt 40 to 63 Amps 16 KA in enclosure connecting with DB including 10 sqmm X 4 core FRLSH wire, complete all as specified and as directed.

Supply & fix isolator triple pole and neural 415 volt 40 Amps , complete all as specified and as directed.

Supply, Installation, Testing and Commissioning of 'Solar Hot Water System' (Flat Plate Collector) based on indirect transfer of heat of capacity 100 LPD including back up hot water tank of stainless steel inbuilt 2KW coil with thermostat and 3 core 2.5 sqmm wire for connection, complete all as specified and directed. Make TATA/ Jaquar/ Racold or equivalent as approved by GE.

Taking down carefully exhaust fan of any size from wall, dismantling blade completely, cleaning, servicing & Painting with two coats of synthetic enamelled paint, marking MES number and refixing and connecting with 3 core copper cable complete all as specified and directed.

Supply and fixing for hot water pipe duly insulated with glass wool and aluminium cladding 25 mm bore with all connection accessories laid on floor and joined, complete all as specified and directed. Make: Prakash Surya/ Jindal/ TATA or equivalent as approved by GE.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, louvers and frame, complete all as specified and directed. Make: Bajaj/ CG/ Havells or equivalent as approved by GE.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.95,352.50 /- ]

DEESHA CONSTRUCTIONS

M/s T.S.JOHAR

AK CONSTRUCTION

DE PRETTY AND CO

M/s M.G. Hargunani

chronicle enterprises

M/s Jagdish Staioners and General Stores

Bidder Name

DE PRETTY AND CO

chronicle enterprises

DEESHA CONSTRUCTIONS

Devika Constructions

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

AK CONSTRUCTION

M/s T.S.JOHAR