Special Repair for installation of M.S Racks in Record Room Judicial Complex Kurukshetra

Amount

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing in cement HSR 8.5 (B)

Removing doors and windows (wooden and steel) together with the dismantling of walls HSR 8.17 (a)

First class brickwork laid in cement sand mortar 1:6 in first storey upto 4 meters above plinth level.(HSR-11.7)

Cement Concrete 1:4:8 with stone aggregate 40mm nominal size in foundation and plinth. (HSR 10.39)

Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (NS). size 4'-3" x 2'-3" x 11'-6"

Providing and fixing vitrified tiles of size 600 x 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS (H.S.R.14.89)

15 mm thick cement plaster 1:6 on the rough side of single or half brick wall (H.S.R 15.12)

12 mm thick cement plaster 1:6 (H.S.R 15.7)

Providing and applying two coats white cement based putty over plastered (H.S.R 16.81)

Factory manufactured panelled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash, etc.,(non-coniferous timber other than teak, conforming to I.S. specification No.1003,kiln-seasoned),with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/ cleats, stops, nails etc., complete, fixed in position (excluding the cost of any fittings, other than specified above,but including labour for fixing the same in position). 35 mm thick doors (HSR-17.90) (b)

30 mm thick door (HSR-17.90) (a)

Painting one coat with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint.(HSR-16.7)

Painting one coat with ready mixed paint for metallic surfaces in all shades on old steel or iron work.(HSR-16.11)

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work.(HSR-16.60)

Providing two coats of exterior acrylic emulsion paint. b) 2nd quality (HSR-16.79) (b)

Note: In case of any difference in the unit & nomenclature of any of the HSR items depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

Aggarsain Coop L C Society