Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.7 LAccepted-AOC CC III 28A JANTA BHAWAN ROAD SIRSA HARYANA 125055 | SIRSA | HARYANA | 125055 | L1 | Accepted-AOC L1 | |
| 2 | L2₹19.7 L+₹6,713 (0.34%)Rejected-Finance FLAT NO 10 S NO 98 PLAT NO 78 SAI SAYAJI PARK A RIGHT BHUSARI COLONY KOTHRUD PUNE 411 038 | PUNE | MAHARASHTRA | 411038 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹20.2 L+₹56,410 (2.87%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹20.2 L+₹57,283 (2.91%)Rejected-Finance NOT FOUND | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹20.3 L+₹62,213 (3.16%)Rejected-Finance H NO 2049 HANUMAN COLONY NEAR TCP 3 HISAR CANTT PIN 125006 HARYANA | HISAR | HARYANA | 125006 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
1 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) SIRSA
GE (AF) SIRSA-125055
MAINT OF STEEL GATE/BARRICADES/BIRD PROOF NETTING AND MISC B/R NATURE WORK FOR BPS/HANGERS IN TECH AREA AT AF STN SIRSA
2023_MES_603335_1
GE/SRA/T-31/2023-24
Open Tender
Miscellaneous Works
Item Rate
210 days
GE (AF) SIRSA
PLEASE REFER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE (AF) SIRSA
₹40,000
Yes
22 Jul 2023
15 Jun 2023
3 Jul 2023
15 Jun 2023
1 Jul 2023
26 Jun 2023
16 Jun 2023 - 21 Jun 2023
Amount
M&L for Repairs/Maintenance to Steel Gate of Blast Pen, cleaning of the Tracks, Oiling/ Greasing of all Moving Parts/ wheel of the Gate and making Serviceable for smooth functioning & to prevent dislodging of steel gates from the rail, Free Movement of Gate including replacement/ adjustment, resetting of derailed steel gates on the existing rail, welding, drilling, etc. of all Minor Parts (viz Nuts, Bolts, Rods, Flat Iron, Angle Iron, Guide Rail, replacement of Ball Bearing, etc. of Steel Gate, area exc. 25 SQUARE METRE but not exc. 35 SQUARE METRE Each (approximately) and work carried out on Quarterly basis (i.e., after every 03 months) complete all as specified and as directed. Note : Maint/ repair of all steel gates shall be done any number of times within the quarter period for smooth functioning of gates. Rates for this are included in the item and no extra charge shall be paid.
All as per item No. 01 here-in-before but for Hangar gates of area exc. 50 SQUARE METRE but not exc. 60 SQUARE METRE Each (approximately) and work carried out on Quarterly basis (i.e., after every 03 months) complete all as specified and as directed. Note : Maint/ repair of all steel gates shall be done any number of times within the quarter period for smooth functioning of gates. Rates for this are included in the item and no extra charge shall be paid.
M&L for Repairs/Maintenance to Mild Steel Barriers moving on Rollers over PTT/ Links/Loops Cleaning of Tracks, replacement of damaged track, Oiling/ Greasing of all Moving Parts of Mild Steel Barriers and making Serviceable for Free Movement of Barrier including replacement/adjustment, welding, drilling, etc. of all Minor Parts (viz Nuts, Bolts, Rods, Flat Iron, Angle Iron, Guide Rail, replacement of Ball Bearing, etc. of Mild Steel Barrier, area exc. 25 SQUARE METRE but not exc. 35 SQUARE METRE Each (approximately) and Work carried out on Quarterly basis (i.e. after Every 3 Months), complete all as specified and as directed. Note : Maint/ repair of all barricades shall be done any number of times within the quarter period for smooth functioning of barricades. Rates for this are included in the item and no extra charge shall be paid.
M&L for Repairs/Maintenance to Electrically operated Steel Gate of Hangars, cleaning of the Tracks, Oiling/ Greasing of motors/ gears/ all Moving Parts/ wheel of the Gate and making Serviceable for smooth functioning & to prevent dislodged of steel gates from the rail, Free Movement of Gate including replacement/ adjustment, resetting of derailed steel gates on the existing rail, welding, drilling, etc. of all Minor Parts (viz Nuts, Bolts, Rods, Flat Iron, Angle Iron, Guide Rail, replacement of Ball Bearing, etc. of Steel Gate, area exc. 60 SQUARE METRE but not exc. 90 SQUARE METRE Each (approximately) and work carried out on Quarterly basis (i.e., after every 03 months) complete all as specified and as directed. Note : Maint/ repair of all steel gates shall be done any number of times within the quarter period for smooth functioning of gates. Rates for this are included in the item and no extra charge shall be paid.
M&L Taking down carefully Mild Steel Blast Pen Gate, area exc. 25 SQUARE METRE but not exc. 35 SQUARE METRE Each (approximately) with using Hydra/Crane, Tractor, etc., keep aside and re-fixing in Position after fixing Rolling Wheel including necessary adjustment, welding, drilling of all Minor Parts viz Nuts, Bolts, Rods, Flat Iron, Angle Iron, Guide Rail, Ball Bearing, etc. complete all as specified and as directed.
S&F in repairs Mild Steel Rolling Wheel 200mm to 250mm dia (minimum weight 18.00 KILOGRAM) suitable for Steel Blast Pen Gates complete all as specified and as directed. NOTE : (a) Steel Blast Pen Gate area exc 25 SQUARE METRE but not exc 35 SQUARE METRE Each (approximately). (b) New Wheel shall have extended groove as required. (c) Taking down & refixing of gate after fixing/ refixing of new/old wheel shall be measured under item No. 05 here-in-before.
M&L Running Welding in Repairs, Thickness of Metal to be welded exc. 6.0mm but not exc. 9mm and not exc. 2.5 Cm in Length for Steel Gate, Windows, Fencing Post, etc. complete all as specified and as directed.
M&L Running Welding in Repairs, Thickness of Metal to be welded exc. 6.0mm but not exc. 9mm and exc 2.5 Cm but not exc. 5.0 Cm in Length for Steel Gate, Windows, Fencing Post, etc. complete all as specified and as directed.
S&F in repairs Plain Mild Steel Wire 4.0mm dia, Galvanised Class 3, in detached Work such as for Mosquito Nets, fixing to straining Bolts, Hooks, Eyes, etc. including restraining & re-securing and making good or replacement of staples, etc. complete all as specified and as directed. NOTE : Each Line Mild Steel Wire to be measured for Payment.
Tightening of existing loose Plain Mild Steel Wire 4.0mm dia and fixing to straining Bolts, Hooks, Eyes, etc., and work carried out on Half yearly basis (i.e., after every 06 months) complete all as specified and as directed. complete all as specified and as directed. Note : Each Line Mild Steel wire to be measured for Payment.
Taking down Cement Plaster including raking out Joints, hacking for Key, scrubbing down with Water and removing Debris, etc. to Outside MD/AF Land, complete all as specified and as directed.
M&L Rendering (Internal) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, Plastered Surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.
M&L for 15 mm thick plastering in two layers, 10 mm + 5 mm in cement mortar 1:4, top layer of 5 mm thickness mixed with with water proofing compound (as per manufacturer's instructions) on brick/stone walls or concrete surfaces finished even and fair (upto any height) for external surfaces complete all as specified and directed. Note : Water Proofing compound shall be measured and paid seperately as "Supply only".
Supply only Integral Water Proofing Compound, conforming to IS and/or as approved, complete all as specified.
M&L for bringing suitable approved earth from outside AF land and stacking on site for measurement complete all as specified and directed. NOTES :- (1) Earth required for embankment/filling shall be of approved quality and shall be brought from outside the AF land by contractor under his own arrangement. No extra shall be admissible on this account. (2) Quoted rate shall be deemed to included for all labour required for excavation, removing the soil, loading and unloading, transportation to site, making temporary profiles, levelling etc. (3) Density of finished earth in embankment, traverse etc shall be as directed by GE/Engr-in-Charge. (4) Necessary deduction for voids in terms of Para 3.6 on Ser page No 21 of SSR Part-II, 2020 (Rates) shall be carried out from the finished quantity of earthwork. Contractor's quoted rate shall be deemed to be inclusive of the above aspect and no claim shall be entertained at a later date in this regard.
Forming embankments or earth filling over blast pens & traverse walls including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base
All as per item No. 16 but exc. 1.5 m and n. exc 3.0 m high from base
All as per item No. 16 but exc. 3.0 m and n. exc 4.5 m high from base
All as per item No. 16 but exc. 4.5 m and n. exc 6.0 m high from base
All as per item No. 16 but exc. 6.0 m and n. exc 7.5 m high from base
All as per item No. 16 but exc. 7.5 m and n. exc 9.0 m high from base
M&L for preparation of new plastered or unplastered surfaces of wall and applying three coat of white wash complete all as specified and as directed.
M&L preparing Old Decorated/Treated Surfaces of Ceiling of any description and applying One Coat of White Wash, complete all as specified and as directed.
M&L for preparation of old decorated surface of wall and applying one coat of white wash complete all as specified and as directed.
M&L preparing newly Plastered surfaces of Walls by applying 1.5 mm thick Wall Putty, cutting/rubbing to obtained a Smooth Surface and applying Two Coats of Weather Proof Exterior Emulsion Paint (Plain pattern) with approved Tint over a coat of appropriate Primer (as per Manufacturer's instructions), complete all as specified and as directed.
S&F bird proof netting UV stabilized made of 1mm dia HDPE/Nylon wire having mesh size n.exc 25mmx25mm including taking down existing net complete all as specified and as directed. Note : The work shall be executed at a height exc. 08 mtrs but n. exc. 15 mtrs or at the same height of existing/replaced bird proof net at site. Quoted rate shall be deemed to include for all ladder, scaffolding, safety gear etc.
S&F polycarbonate diamond cut sheet 1.6mm thick as in cladding/roof including necessary side lap fixed with coach screw and washer including taking down existing boarding/sheet, any type complete all as specified and as directed.
Dismantling structural steel work of any description not otherwise provided for, complete all as specified.
Dismantling timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position complete all as specified and as directed
M&L steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
M&L preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
Ajay Enterprises
DCM ENTERPRISES
shiv shanker enterprises
STAR CONSTRUCTIONS
YESH BUILDERS
NISHTHA BUILDERS
YOGINDER KUMAR GUPTA AND COMPANY
M/s MANN CONSTRUCTIONS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .