8163-Provn of Gate

Amount

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as directed.

Demolition of reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as directed.

Dismantling of wrough iron or mild steel work of any description not otherwise provided for all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out in hard/dense soil.

Removal of excavated soil to a distance not exc 50 m and deposited where direcrted to a level not exc 1.5 m above starting point.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soil.

Hardcore of guage not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface with broken stone boulders.

PCC 1:4:8 type D2 ( using 40 mm graded stone aggregate ) as in foundation,filling and mass concrete.

M&L for RCC M-30 Design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete.

M&L for RCC M-30 Design mix as in slab

M&L for RCC M-30 Design mix as in roof beams and lintel bands

M&L for RCC M-30 Design mix as in columns, pillars, piers, posts and struts

Brickwork with modular fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 all as specified.

Forwork to sides of concrete foundation, sides apron to abutment and wing wall,basement slab with rough finished surfaces of flat concrete complete all as specified.

Form work to soffits of suspended slabs such as roof slabs and similar work not exceeding 200mm thick in flat rough finished surfaces of concrete complete all as specified.

Form work to sides and soffits of floor or roof beam and lintels as in flat rough finished surfaces of concrete complete all as specified.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions rough finished square or rectangular complete all as specified.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide complete all as specified.

M & L Mild steel TMT bars10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

S&F Framed work (Fe 410-W (GdeE 250) Quality A) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

20mm thick Granite (of any type) tiles machine cut, in cladding laid over cement screed 10mm thick in CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations.

M/L for rendering 5 mm thick in CM 1:3 on ceiling concrete surfaces finished even and smooth without using extra cement and applying three coats of white wash incl prep of newly plastered surface

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

M & L for Preparation of new plastered surfaces of wall and applying two coat of cement base paint over a coat of alkali resistant priming paint

M&L for preperation of new.or previously untreated steel surface and applaying two coat of sybnthetic enamal paint over a coat of red oxide primer surfaces of any description, over 10cm in width or girth, not otherwise described

S&F for 8" height stainless steel letters mirror finished laser cutting finished 304 A grade & letterselegantly finished

Removing the existing roof treatment of any description completely and remove all the debris from site and rubbish off the premises complete all as directed.

Material & labour for water proofing treatment with APP modified prefabricated five layer water proofing membrane, not less than 3mm thick and weighing not less than 3.60 Kg/Sqm reinforced with non woven polyester matt black finished over compatiable primer at 0.3 litre/Sqm, touching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint over the membrane. The over lap joint shall be provided of 75mm in longitudinal direction and 100mm in tranverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage. Note : The work shall be carried out be authorised applicators of manufactures

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth and getting out soft / loose soil for laying cables / pipes / erection of poles etc all as specified and as directed.

Supply and lay common burnt clay building bricks, sub class B of size 230x115x75mm for cable protection.

Supply, lay, spread in trenches river sand including spreading, levelling, punning for cushioning of cable all as directed. Note :- Punned thickness only shall be measured and paid

Supply & lay LT UG cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade of size 2 core 10 sqmm all as specified and as directed. Note :- 1. Lugs and glands are deemed to be included in the rate quoted for laying of cable and to be used properly whereever required while connecting cables to the panel board. 2 Earth work such excavation, refilling, etc. shall be measured separately under relevant items.

Supply and fixing Integral post of latern New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Make :- Havells cat part no CORALPT35WLED757PSYMTOPC or Equivalent in makes specified.

Supply and fixing LED flood lighting luminarie Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural facade lighting. Make :- Havells cat part no JETA PROPLUSFL120WLED757LTG or Equivalent in makes specified.

Supply and fix pole mounted Sheet Moulded Compound (SMC) Box weather proof type with hinged type door off white color of size 240x130x110 mm comprising of 1 No MCB 6A and 1 No neutral link complete fixed on pole with suitable clamps, bolts and nuts all as specified and as directed. Make: Sintex

Supply & lay GI pipe light grade including necessary fittings of 40 mm bore dia all as specified and directed .

Material and labour for cement concrete 1:2:4 (using 20mm graded aggregate ) for foundation of Bollard light fitting including necessary foam work complete.

M/S.RANGA AND CO

RAVI ENTERPRISE

DJ Group