Construction of cow Sanctuary at Village Beetan Distt. Una (HP). (SH- Construction of two No. Cow sheds and attendant room on back side of approach road).

Amount

Cutting in earth work and disposal of excavated earth Pick work upto all leads and lifts. including carriage of materials upto all leads and lifts.

Excavation in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification

Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 crushed graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in:Foundation and plinth including carriage of materials upto all leads and lifts.

Providing form work with steel plates 3.15 mm( three decimal fifteen millimeter ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in including carriage of materials upto all leads and lifts. (a). Foundations, footings & bases of columns etc., and mass concrete.including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .

(B).columns, pillars, posts and struts square rectangular or polygonal, circular in plan in any height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .

(C). beams cantilevers girders and lintels side and soffit of beams ,beam haunchings, cantilevers, bressumers and lintels in any depth / heights /thickness including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .

(D).Flat surfaces such as soffits of suspended floors, roofs, landing and the like. ( i). Floors etc., upto 200mm( Two hundred milimetre) in thickness including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .

(E). Vertical surfaces such as walls (any thickness) partitions and like i/c attached buttresses, pillasters, plith and string courses and the liike including carriage of materials upto all leads and lifts.

Providing and laying cement concrete work 1:2:4 (1 Cement:2 Sand:4 crushed graded stone aggregate 20 mm nominal size) and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete work including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. including carriage of materials upto all leads and lifts. (a) Foundations, footings, bases of columns and the like and mass concrete. including carriage of materials upto all leads and lifts.

(B). columns, pillars, posts and struts up to all heights complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .

(c). suspended floors, roofs, landing and shelves and their supports balconies beams,girders, bressumers and cantilevers upto all floor level/height including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .

(D). Walls (any thickness but not less than 0.10 metre (zero point ten meter thickness) including attached pilasters buttersses,plinth and string courses etcetera from top of foundation in all depth including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .

Providing and laying tor steel(Tata/Sail/RINL/Shyam steel make) reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .

Providing cement concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specification clause 802,803,1202 and 1203 PCC 1: 3: 6 ( 1 Cement :3 sand :6 crushed greded stone aggregate 20 mm nominal size. including cost of form work and carriage of material within all leads and lifts.

Providing Brick work using common burnt clay building bricks in superstructure 1:6 (1cement:6sand) up to all height including carriage of material within all leads, lifts and heights. 1st class bricks.

15mm (fifteen milimetres) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior/exterior plastering upto all floor level including arises, internal rounded angles, chamfers and or rounded angles not exceeding 80mm (Eighty milimetres) in girth and finished even and smooth with cement mortar 1:6 (one cement: six sand) including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Applying Birla white wall care putty two coats over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. including carriage of materials upto all leads and lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer including carriage of materials upto all leads and lifts.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces(two coats)to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered material including carriage of materials upto all leads and lifts.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With white enamel paint.or other than white including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint in beams joists channels ,angles , MS Pipe, MS Hollow Section, tee ,flats with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters, Doms and the like.including carriage of materials upto all leads and lifts.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials upto all leads and lifts

Providing and fixing ridges or hips 60 cm overall with 0.60 mm Thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials upto all leads and lifts.

Providing and fixing of M.S. BP sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instructions of the Engineer-in-charge. (weight of sheet not less than 15kg/sqm).including carriage of materials upto all leads and lifts.

Cement concrete flooring 1:2:4 (1 cement : 2 sand:4 graded stone aggregate 20 mm nominal size)laid in one layer finished with a floating coat of neat Cement.50mm thick. including carriage of materials upto all leads and lifts.

First class brick flooring laid dry and grouted with cement morter 1:4 (1 cement :4 sand) including finishing the joints flush. 11.10 cm thick (using conventional brick)brick on edging including carriage of materials upto all leads and lifts.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts and bolts or rivets and washers or welded as required as per site requirement complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm, including carriage of material with in all lead and lifts.

6mm (Six milimetre) cement plaster to ceiling in cement mortar 1:4 (One Cement is to four Sand) in all floor level. The rate is including carriage of materials within all leads and lifts and as per the direction of Engineer-in-Charge.

Providing Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 Sand) upto all height 1st Class Bricks including carriage of material within all leads and lifts.

Constructing manhole with R.C.C top slab in 1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing: including carriage of materials upto all leads and lifts. (i) Inside size 800mm x 800mm and 500mm deep including precast RCC manhole Cover and frame of required shape and approved quality HD 20 Circular shape 560 mm internal diameter ( heavy duty test load 20MT as per IS 12592 Part I & II ) With 230mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3) including carriage of materials within all leads and lifts

Providing and fixing to wall ceilling and floor galvainised mild steeel tubes(medium grade)tube fittings and clamps including making good the wall including carriage of material within all leads and lifts. (a) 15 mm nominal bore.( Jindal make) including carriage of materials upto all leads and lifts.

Making connection of galvainised steel distribution branch with galvainised mild steel main 15mm to 40mm nominal bore by providing and fixing Tee including cutting and threading the pipes complete including carriage of material within all leads and lifts.

Providing and fixing high pressure PVC 6.5 kg/sqm pressure spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete 110 mm dia.including carriage of materials upto all leads and lifts.

Providing and fixing PVC accessiries ISI marked including fixing with approved adhesive etc. complete. including carriage of materials upto all leads and lifts.(i) Plain bend 110 mm nominal size. including carriage of materials upto all leads and lifts.

Door bend 110 mm nominal size. including carriage of materials upto all leads and lifts.

Plain Tee 110 mm nominal size. including carriage of materials upto all leads and lifts.

Door Tee 110 mm nominal size. including carriage of materials upto all leads and lifts.

Providing and fixing pvc cowl 110mm dia including carriage of materials upto all leads and lifts.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete. 110 mm X 90 mm including carriage of materials upto all leads and lifts.

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately) ordinary closet .including carriage of materials upto all leads and lifts.

Providing and fixing PVC Coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) including carriage of material within all leads and lifts.

Providing and fixing GI inlet connection for flush pipe with WC pan including carriage of material within all leads and lifts.

Providing and fixing vitreous china wash basin of required Shade with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings.Flat back 630x450mm including carriage of material within all leads and lifts.

Providing and fixing viterous china pedestal for wash basin complete recessed at the back for the recption of pipes and fittings including carriage of materials upto all leads and lifts.

Providing and fixing concealed for wash basin including carriage of materials upto all leads and lifts.

Providing and fixing CP brass waste for wash basin or sink 32 mm dia including carriage of material within all leads and lifts

Providing and fixing 100m sand cast iron grating for gully,foor or Nahani trap including carriage of material within all leads and lifts..

Providing and fixing 600x450mm bevelled edge mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screw and washers including carriage of material within all leads and lifts.

Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden pluges with CP brass screws 600x20mm including carriage of material within all leads and lifts.

Providing and fixing CP brass bib tap with capastan head 15 mm dia. including carriage of material within all leads and lifts.

Providing and fixing CP brass pillar tap with capstan head 15 mm dia including carriage of material within all leads and lifts.

Providing and fixing CP stop cock 15mm dia including carriage of material within all leads and lifts.

Providing and fixing PVC connection pipe with brass unions 30 cms length 15mm nominal size including carriage of material within all leads and lifts.

Providing and fixing brass full way valve with wheel including carriage of material within all leads and lifts. (a) 15mm nominal bore including carriage of materials upto all leads and lifts.

Providing and fixing GI or MI union including carriage of material within all leads and lifts. (a) 15mm nominal size including carriage of materials upto all leads and lifts.

Providing and fixing charomium plated brass soap dish with C.P.brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material within all leads and lifts.

Providing and fixing statinless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding fittings 610 x460 mm with bowl depth 200 mm. including carriage of materials upto all leads and lifts.

Providing and fixing PVC water storage tank double core 1000 ltr net capacity complete in all respect. Sintex make weight not less than 22 kg. including necessary fittings including carriage of material within all leads and lifts.

Providing and fixing jet connection complete in all respect 15 mm Dia including carriage of material within all leads and lifts.

Providing and fixing plastic seat ( Solid/ Hollow type) and cover for wash down water closet with C.P brass hinges and rubber buffers including carriage of material within all leads and lifts. White plastic seat and cover.

Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. 1st class Kail wood. 35 mm thick.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws.1st class kail wood. 30 mm thick.

Providing and fixing M.S. sliding door bolts bright finished or/and black enamelled with nuts and screws etc. complete. 300X16 mm

Providing and fixing M.S. hooks and eyes. 150mm

Providing and fixing oxidised M.S. tower bolts (barrel type) with necessary screws etc. complete. ( a). 200x10mm

Providing and fixing oxidized M.S. handles with the necessary screws etc. complete. ( a). 200mm

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. double legs to suit shutter thickness complete.including carriage of materials upto all leads and lifts.

Providing and fixing hydraulic door spring ISI mark with screws etc. complete.including carriage of materials upto all leads and lifts.

Providing and fixing Digital wall tiles 6 mm ( six millimetre) thick in skirting risers of steps and dado of size 30×60cm nitco or its equivalent of approved make and size 12mm ( Twelve milimetre) thick cement mortar 1:3 (one cement isto three sand) and jointing with neat cement slurry including carriage of material in all leads and liftrs :-( size thirty centimetre into twenty centimeter) as per HPPWD specification 1990 (one thousand Nine hundred Ninety ) volume-I including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge as per HPPWD specifications. including carriage of materials upto all leads and lifts.

Providing and laying spartic ceremic anti skid tiles 5.5mm.thick in flooring (400 x400mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement. including carriage of materials upto all leads and lifts.

Om Parkash Govt Contrator

abhishek dhiman