Construction of Staff Quarters for Arulmigu Thirucoutrallanatha swamy Temple at Coutrallam Tenkasi Taluk in Tenkasi District

Amount

Earth work excavation for foundation in all classes of soils and sub soils and todepth as may be directed except in hard rock, requiring blasting, including initial leads and lifts and re-filling the sides of foundation, with excavated earth in 150mm layers well watered rammed and consolidated, including depositing surplus earth clearing and levelling the site, shoring shuttering baling out water wherever necessary etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation and basement with Sand Gravel Mix 1:1 in layers of not more than 15cm thick well rammed watered and consolidated etc.,

Cement concrete 1:5:10 (one cement five sand ten aggregate) using 40mm gauge hard granite broken stone jelly for foundation including cost and conveyance of all materials labour for mixing,l aying, compacting, curing, dewatering, side shuttering, wherever necessary including curing etc.,complete complying with standard specification and as directed.

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Column /footing, Grade beam Etc

Providing form work for centring the soffits of all reinforcement cement concrete surfaces M.S.Sheets of 90 x 60cm x 10 gauge stiffened with welded M.S angle of size 25x25x3mm laid over silver oak joints of size 10cm x 6.50cm spaced at about 90cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at 75cm centre to centre complying with standard specification and as directed.

For plane surfaces such as Rcc Roof slab, beams,Lintels,bet blocks,landing slab, portico slab, beeams etc.,

For Column and Sunshade

Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimumcement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser /super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete,improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mmmachine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jellyand with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricatingcharges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing,curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary withoutclaiming extra, etc., complete complying with standard specification and as directed by the departmentalofficers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.(No separate payment will be made by the Department for the excess usage of materials).

For foundation and Basement:

Above Basement level up to 3.60m height:

First floor:

Second Floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Brick work in following Cement Mortar 1:5 using Country Bricks of size 8 3/4" x 4 1/4" x 2 3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.

Brick work in following Cement Mortar 1:6 using Country Bricks of size 8 3/4" x 4 1/4" x 2 3/4" including curing, etc., complete complying with standard specifiction.

Above basement level up to 3.60m height:

First floor super structure

Second Floor

Brick Partition wall in CM 1:3 (one cement and Four sand) 110mm thick using best quality Country Bricks of size 8 3/4" x 4 1/4" x 2 3/4" for walls incluing cost and convetance of all labour andmaterials including scaffolding curing finishingetc., complete complying with standard specification and as directed.etc., complete

Ground Floor

First Floor

Second Floor

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Providing Weathering Course Concrete to an average thickness of 8cm with20mm size Broken brick jelly in lime mortar over roof slab including laying, consolidating, finishing etc., complete.

Finishing the Top of Roof with One course of machine Pressed Tiles 200 x 200 x 20mm in C.M.1 : 3 - 12mm thick mixed with Water Proofing Compound,Red oxide and pointing with same mortar etc.,

Supplying and paving the floor with Double charged Vitrified Tiles (Marbonite) of approved quality and colour of size 0.60 x 0.60m x 8mm for flooring in all floors over a base layer of cement mortar 1:3 - 20mm thick

Paving the floor with plain Joint free rectified glazed ceramic tiles of size 305x305x8mm in all floors over a base layer of cement mortar 1:3 (One cement and three sand) 20mm thick and pointed with colour cement at the rate of 0.3 kg/ sqm including finishing neatly, curing, etc complete, complying with standard specification and as directed by the departmental officers complete.

Paving the floor with concrete anti-skid tiles to Required shape and design of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing of best quality 110mm Dia PVC rain water pipes including cost and conveyance of all materials and labour charges for fixing in position etc., complete.

supplying and fixing of Teak wood frames including Labour wrought and put upt as per standard specifications.

Supplying and fixing UPVC (Un Plasticized Polyvinyl Choloride) windows of casement type (open)from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EDPM rubber (blacl colour) covered with over all the edges of frame and shutter. the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive engineer before use on work. (SOR - Item no 260)

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying and fixing mild steel grill Gate including cost conveyance of all materials and fixing in position including priming coat etc complete with standard specifications.

Painting two coats with cement paint of first class quality and approved colour, including priming coat and through scrapping and clean removal of dirt etc., complete as per standared specification.

Painting two coats of newly plastered wall surface with Water based Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Providing and fixing of WPC Door using door frame of the size 70mm x 50mm int joined with 10 Nos. of 50mm long screw. The door frame shall be fixed to the wall re by using 80mm long screws through the frame. The WPC shutter of 28mm thick factory made plain pre laminated Hardware made out of ball bearing butterfly hinges -3 nos, 200 mm tower blot 2 nos and 300 mm aldrop 1 no. and 100mm D type handle 1 no. for each shutter and ISI make SS round lock complete, including cost of materials, conveyance and all other incidental charges and labour charges for fixing the door neatly etc.,

Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides commercial ply 3mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos. 150x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 nos. 150mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.

Providing cupboard shelf double leaf shutter using 19 mm thick water proof plywood shutter with country wood frame 12 x 5 cm size both vertical and horizontal frame .The edges of plywood shutter should be fixed with 25 x 12mm size teak wood beading .The MS piano hinges 2 Nos each 30 cm long should be fixed in each shelf .3 strip magnetic catcher 4 nos ,100 mm long handle 'D'type 2 nos ,50mm size door lock 1 no ,125 mm long brass pat lock 1 no should be fixed in each shelf .After the completion of the cupboard shutter the plywood areas both inside and outer side and country wood frame areas should be painted with two coats of enamel painting .The rates inclusive of nails ,fevicols,screws etc., complete.

Polishing the teak wood door with two coats of best French (Lac) polish with approved quality and brand over a coat of bee's waxing including preparing the wooden surface to receive polishing, etc., complete complying as per the standard specifications. (The make, quality and colour of french polish, bees vax should be got approved by the Executive Engineer before use on works.)

Painting new iron works such as gate, steel doors windows ventilators with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer and One coat of Zinc chromite in all floor etc, complete complying with standard specifications.

Supplying and fixing of Cudppah Slab of 50 mm thick for the Cup Boards including labour charges for fixing Cudappah Slab to the Cub Boards as directed by the Departmental Staff.

Supply and fixing terra cota jally of size 20 X 20 X 5cm of approved pattern including pointing finishing to the true alignment, curing, etc.,

Dadooing walls with following best approved quality colour glazed tiles of 300x450x8mm size set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Supplying, laying and joining the following size of UPVC pipes 10 kg / Sqcm of approved quality and best verity conforming to ISS and with ISI Mark laid properly to alignment including cutting, threading and fixing PVC specials but excluding the cost of such specials and fixing to the wall with necessary TW plugs, UPVC clamps and screws, making holes on the wall or drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work, concrete and plastering wherever necessary with necessary scaffolding charges etc., complete.

a) 32mm dia UPVC pipes

b) 25mm dia UPVC pipes

c) 20mm dia UPVC pipes

Supplying and fixing in position of 15mm dia brass chromium plate screw down tap excluding cost of fixing materials etc, complete and as per standard specification.and including cutting and threading wherever necessary etc., complete complying with standard specification etc., complete.

Supplying and fixing in position first quality and approved variety of Gun metal Gate valve/Wheel Valve/check valve/Push cock/Push cock(Heavy type) with ISI mark of the following sizes including cost of shellac, thread etc., complete complying with std specification for both internal and external water supply arrangements etc., complete complying with std specification and as directed by the departmental officers

a) 32mm dia Gate value

b) 25mm dia Gate value

c) 20mm dia Gate valve

Supplying and fixing in position UPVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the UPVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications and as directed by the departmental officers

32 mm dia Elbow

25 mm dia Elbow

20 mm dia Elbow

32 mm dia Tee

25 mm dia Tee

20 mm dia Tee

32 mm dia Bend

25 mm dia Bend

20 mm dia Bend

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications and as directed by the departmental officers

110mm dia PVC ELBOW

75mm dia PVC ELBOW

110mm dia PVC TEE

75mm dia PVC TEE

110mm dia PVC BEND

75mm dia PVC BEND

Supply and fixing in position best quality PVC Soil/ waste pipes of various size having ISI mark and providing leak proof joints including fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitory fittings, dismantling masontry / RCC works wherever necessary and making good the dismantled portion to the original condition, complying with standard specification etc., complete.

110mm dia PVC Soil/ waste pipes

75mm dia PVC Soil/ waste pipes

Supply and Fixing PVC water tank of 1000lit including cost of all materials and labour charges etc., complete

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550x400mm with a pair of cast iron brackets, including cost of 15mm dia metre brass chromium plated pillar tap, 32mm dia metre G. M. Wheel valve, etc., complete.

Supplying and fixing in position Indian water closet Oriya type of size 580x440mm white glazed earthen ware of approved quality size 580x440mm white glazed with ‘P’ trap or ‘S’ trap conforming to IS: 2556-part XII with sand cushion and forming flooring

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supplying and fixing in position of P V C Nahini Trap of size 100 x 75mm with best stainless Steel Gratings of approved make and quality,fixed over a bed of of brick jelly concrete 1:2:5 (One part of Lime, Two parts of Sand and Five parts of 40mm size brick jelly) and finished with cement mortar 1:3 ( One part of Cement and Three parts of Sand) including cost and conveyance of all materials and labour charges including dismantling the masonry works wherever necessary and making good etc complete

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing

Supplying and fixing Mirror 600 xx 450 including cost and conveyance of all materials and all labour charges etc complete.

Supplying and fixing best approved quality Brass Chromium Plated Towel Rail 600 mm Long and 20mm Diametre with brackets of same materials including cost teakwood plug and CP Screws etc.,complete complying with standard specifications.

Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete.

Plastering with Cement Mortar 1:3 (One cement and Five sand), 12mm thick in all floors including curing etc. complete.

Plastering with Cement Mortar 1:3 (One cement and Five sand), 20mm thick in all floors including curing etc. complete.

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete.

Supplying and fixing PVC ventilating shaft of 100mm dia with 3 metre height including cost of 100mm dia AC cylindrical cowl of best approved quality etc., complete.

Collection supplying and filling with graded IRC Metal of following size hard broken granite stone including stacking and filling etc., complete complying with standard specifications and as directed by the departmental officers. The rate includes cost of metal, labour charge for filling.

40mm dia IRC metal

20mm dia IRC metal

Supplying, laying and jointing glazed stoneware pipes of following dia of approved best quality with spigot and socket ends (in reverse direction) in dry condition and laid in loose joints (i.e.) without cement and spun yarn etc. complete.

Supplying and fixing in position 150mm dia stoneware tee of approved best quality and provding leak proof joints with cement, spun yarn, etc., including dismantling the brick work and re-doing the dismantled portion to the original condition etc. complete.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws etc. complete.Below ground level

110mm dia PVC soil pipe

Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.

Supplying and fixing Teakwood fully panelled shutters for using Teakwood scantlings upto 4m length and teakwood 40mm thick for styles and rails and 22mm thick for planks and panels including cost of wind appliances and labour charges for fixing the furniture fittings in position but excluding cost of furniture fittings complete as directed by the Departmental officers.

supplying and fixing galvalume sheet roofing including all incidental charges etc complete with standard specifications

supplying and fixing steel roof truss made out of 2 Nos of 50x50x6mm angle for tie rafter and 40x40x6mm angle for web and 75x40 ISLC for purlin cost including conveyance of materials and fixing in position including priming coat etc complete with standard specifications

Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT /SAFETY FIRST /EQUIVALENT

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 1.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End (SD-281)

Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End (SD-298)

Supply and fixing of single box type 4'20W LED fitting with TW round blocks on wall or ceiling with with PVC unsheathed copper leads from terminals to the fitting (LED fittings should be of Higherend company make like philips /cromption etc) (Data -1)

Supply and fixing of 9W LED bulb for BH point (Data - 2)

Supply and fixing of WT Bulk head LED Fitting suitable for 15W LED bulb with connection (SD - 85)

Supply and fixing of fancy lamp fittings with 9W LED bulb on wall with connections (Data-3)

Supply and fixing of foot lamp on wall with connections(Data-4)

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch(SD-105)

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting (SD-448)

Supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod on the Existing clamp (SD-110)

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of opening (SD-115)

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan (SD-120)

Supply and fixing of 2nos.6A two module 5 pin socket , 2 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-383)

Supply and fixing of 1no 16A switch mounted in suitable 1 module Metal flush mounted box with suitable plastic combined cover plate with Connections (Data-5)

Supply and fixing of 1no 16A plug mounted in suitable 2 module Metal flush mounted box with suitable plastic combined cover plate with Connections (Data-6)

Supply and fixing of 20A DP MCB Switch in suitable 2 pole sheet steel enclosure in flush with wall with earth connection (Data-7)

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm PVC insulated SC unsheathed FRLScopper wire and making good of the concealed portion with suitable colour (SD-337)

Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4.00 sq.mm PVC insulated SC unsheathed FRLScopper wire and making good of the concealed portion with suitable colour (SD-351)

Supply and Run of 2 of 6 sq.mm. (84/0.3) PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm PVC insulated SC unsheathed FRLScopper wire and making good of the concealed portion with suitable colour (SD-353)

Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed FRLScopper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour (SD-347)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD-526)

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End (SD-538)

Supply and fixing of 1500W automatic electric water heater of 35 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire but without plumbing connection(SD-104)

Supply and fixing of 32A double pole MCB Switch in a sheet steel enclosure suitable for 2 pole MCB switch with earth connection (Data - 8)

Supply and fixing of 32A triple pole MCB Switch in a sheet steel enclosure suitable for 4 pole MCB switch with earth connection (Data - 9)

Supply and fixing of 40A double pole ELCB switch in a sheet steel enclosure suitable for 2 Pole MCB Switch with earth connection ( Data-10)

Supply and fixing of 40A 4 pole ELCB switch in a sheet steel enclosure suitable for 4 Pole MCB Switch with earth connection ( Data-11)

Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit wit h1 NO 40A 30mA double RCD/RCCB ( Higher end) with suitable neccessary connection ( Higher End) (SD-125)

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 Nos. 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1No 40Amp 30mA 4 pole RCD/RCCB ( Higher end ) with Suitable neccessary connection (SD-128)

Supply and fixing of 3 phase 32A aerial fuse unit for 3 Nos. 32A fuse units (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps (SD-135)

Supply and fixing of 15A aerial fuse unit (500A) on suitable 100 x 100mm TW concealed box with hylem sheet on the tapping pole with necessary clamps (SD-130)

Supply and clamping of 2 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD-195)

Supply and clamping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps (SD-199)

Supply and fixing of 65mm (2-1/2") dia G.I Pipe(class-B) of 6 mts length with 300mm x 300mm x 6mm base plate duly welded at the bottom with Concreting with Construction of masonary pedestal with necessary clamps to hold the LTUG Aluminium Service Cable with painting of suitable colour (Data-12)

Supply and run of 1 of No.8 SWG copper conductor on suitable PVC rigid pipe on wall with painting of suitable colour for earth connection (SD -371)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry(SD 211)

M J ENGINEERING CONSTRUCTION (BID ID -1323032)