Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.8 LAccepted-AOC NIVADA TIVAYA ROAD TIVYA MUST BUS STOP VILLAGE KHATAULI SAHARANPUR UP 247001 | SAHARANPUR | SAHARANPUR | UP | 247001 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.4 L+₹95,386 (5.16%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest Bidder | |
| 3 | L3₹19.9 L+₹1.4 L (7.54%)Rejected-AOC 178 A BARODIA SCHEME NEAR RAILWAY STATION NEAR RAILWAY STATION BANI PARK JAIPUR RAJASTHAN 302006 UDYAM RJ 17 0169767 | JAIPUR | RAJASTHAN | 302006 | L3 | Rejected-AOC Other than Lowest Bidder | |
| 4 | L4₹19.9 L+₹1.4 L (7.63%)Rejected-AOC PLOT NO 39 SHRI SHIVE NAGAR 05 MOTI BANDHA MACHEDA HARMADA JAIPUR 302013 RAJ | JAIPUR | JAIPUR | RAJASTHAN | 302013 | L4 | Rejected-AOC Other than Lowest Bidder | |
| 5 | L5₹21.8 L+₹3.4 L (18.2%)Rejected-AOC | L5 | Rejected-AOC Other than Lowest Bidder |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
31 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (S) Jaipur
Garrison Engineer (South) Jaipur Military Engineer Services Kalyan Marg, Jaipur302006
REPAIR AND MAINT OF E M INSTALLATION BLDG IN ZONE-III AREA UNDER AGE B R-IV OF GE (S) JAIPUR
2022_MES_566248_1
GE (S)/J-60P OF 2022-23 8773/E8
Open Tender
Civil Works
Item Rate
270 days
Jaipur
Class D and a(i) category
9 documents required · 9 mandatory
₹500
GE (South) Jaipur
₹60,000
Yes
6 Feb 2023
6 Dec 2022
2 Jan 2023
6 Dec 2022
31 Dec 2022
19 Dec 2022
Amount
Taking down cement plaster any description, on brick/stone walls or concrete surface, etc. including raking out joints, hacking for key & scrubbing down with water, etc. & removing rubbish outside MoD land complete all as directed.
M&L rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 externally and finished even and fair ( without using extra cement ) complete.
M&L rendering 5mm thick plaster for ceiling on concrete surfaces in CM (1:3) including finish even and smooth with out using extra cement.
M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and fair without using extra cement.
M&L for preparation of plastered surfaces of wall including plaster/ cornices etc and applying two coats of oil bound distemper over one coat primer over and including one coat of cement base wall care putty applied as per manufacturers instruction complete.
M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash all as specified and as directed by Engineer-In-Charge.
M&L for Preparation of old plastered surfaces of walls including washing, rubbing down and stopping holes, trading oil and greasy spots and applying two coat of Distemper oil emulsion complete as specified and directed.
M&L two coat of cement base paint over a coat of alkali resistant primer paint on wall including preparation of newly plaster surface of wall as specified.
M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coat of cement base paint all as specified.
M&L for preparation of old decorated surfaces of ceiling by brooming down or steel wire brushes, scrapping down smoke soot, moulds, efflorescent salts etc and applying one coat of white wash all as specified.
M&L for preparation of old painted wooden surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
M&L for preparation of old painted steel surfaces, exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
Dismantling of plain or corrugated steel sheeting any gauge, thickness, from roof coverings etc complete all as specified and directed.
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete as specified
S&F Steel work in trusses fabricated with reactangular / Square hollow section, including special shaped, washers etc including cutting welding, bending in shape etc using tube of YST 240 grade confirming to to IS-4923 complete all as specified & directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for as specified.
S&F mild steel framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165 complete as specified.
Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as directed by Engineer-in-charge.
M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement etc complete as specified.
M & L fibre reinforced, UV resistant elastomeric liquid applied water proofing & Heat reflective coating coating with acrylic Polymers and polyesterfibres,SmartCare Damp Proof or approved equivalent.The coating shall resist 7 bars of water pressure as per DIN 1048 standards, with elongation of 220% as per ASTM D412 & crack bridging of upto 1 mm & with high SRI value conforming to ASNZ standard. And applying three coat of Elastomeric waterproofing coating with recron fibres & High SRI value (Damp Proof) but fisrt coat of should be as primer for terrace waterproofing. Damp Proof is a part of the DSR as per 22.22A complete as per manufracturer instruction/authorised aplicators. The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes & preparation surface measured & paid under item No 19.00 above complete in all respect as per the direction of Engineer-in-Charge.
Dismantling of old u/s chain link fencing of any description from post including line wire etc complete as specified.
Supply only galvanised mild steel chain link fencing of mesh size 100 X100 mm using/made of 4 mm dia complete as specified.
Fixing only chain link fencing of mesh size 100 X100 mm using 4 mm dia galvanised steel wire fixed to any standarad rails & bolts incl provision of binding wire where required etc complete as specified.
M&L for PCC 1:3:6 type C 2 using 40mm graded stone aggregate as in foundation, filling, mass concrete complete as specified.
S & F mild steel angle iron post of as in fencing post confirming to Fe-290-0 Gde-165 all as directed by Engineer – in- Charge. Note :- Dismentling of existing u/s fencing post will be measured & paid under item No 16.00 here in before.
Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long & dia of shank 11 to 15 mm long.
Supply and fix 10 mm dia mild steel round bar as in line wire for chain link fencing fixed with GI wire all as specified for 410 W or Fe-290 Gde-165 complete.
M&L for preparation of new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide.
S&F MS Tie bars, Flat Iron with screwed ends, nuts, washers and mild steel plates for Fencing, walls, arches, etc. king rods and straining bolts conforming to Fe290 Gde-E-165
Demolition Brickwork of stone/boulder masonry, build in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles
M&L brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete as specified.
M&L for Providing 35 mm thick precast reinforced cement concrete louvers and jallies including precast vertical column as per specified of mix 1:2:4, type B0, using 12.50 mm graded stone aggregate, including moulding but excluding frame set in CM 1:4 complete as specified.
Dismantling of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat complete as specified.
S&F light shade vetrified ceramic tiles double charge edge cut 10mm thick ( square/ rectangular ) polished, area of each tiles not exceeding 0.36sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match over & including 15mm thick screed bed in CM (1:4) finished fair and even complete as specified.
_dittio_ all as per item No 34.00 above but as in skirting/ vertical surface over & including 10mm thick rendering on stone/brick masonary surface or PCC engrs board surface in CM 1:4 complete as specified.
Non skid cermic coloured tiles 7 to 8mm thick joint free (square/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in CM 1:6 complete as specified.
_dittio_ all as per item No 36.00 above but as in skirting/ vertical surface over & incl10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4 complete as specified.
M & L for Glazed tiles 7 to 8 mm thick ceramic coloured tiles in vertical surface size exc 0.11 sqm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4 complete as specified.
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified.
M&L 20 to 25mm thick kota stone slab flooring 20mm thickin CM 1:6 cement screed base laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing polishing fixing complete as specified.
M&L 20 to 25mm thick kota stone as in riser of steps, skirting, dado and pillar laid over rendering 10 thick in CM 1:4 including rubbing polishing fixing complete as specified.
M & L of 20 mm thick Granite (of any type) work (table rubbed and polished) in Slab,steps, jambs, pillars, window cills and all horizontal portion and like in 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete as specified.
M & L 20 mm thick Granite (of any type) work (table rubbed and polished) for wall (veneering to wall) and any vertical surface etc with 12mm thick cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete as specified.
M&L for Rubber moulded chequered cement concrete tile with white cement and pigment (of approved tint) of size 30 cm x 30 cm x 25 mm thick over and including 15 mm thick screed bed in cement Mortar 1:6, set, jointed and pointed in neat cement slurry complete as specified.
Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, all as specified and as directed.
Dismantling Stone slabs and tiles laid dry and pointed of any description or thickness in floors, aprons etc complete as specified.
Material & Labour for machine pressed precast concrete interlocking paver block of approved shape and size of 60 mm thickness, with minimum compressive strength of 40 N / Sqmm (M-40 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating, top surface with white cement and pigment laid over and including 20 mm thick (compacted thickness) sand screed bed complete.
All as per item No 47.00 above but except tiles of thickness 60 mm. Note :- Old serviceable tiles (Paver block) retrieved from item No 46.00 shall be resused under above item.
M&L for 100 mm thick cement concrete 1:4:8, type D-2,(using 40 mm graded stone aggregate) as in Sub base / path / flooring complete all as specified and as directed.
M&L for 75 mm thick plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in plinth protection including finished even and smooth without using extra cement and all as directed by Engr-in-charge.
S&F in repair 1.25 mm thick steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; push pull or manual type complete all as specified including dismentling of existing u/s rolling shutters as directed.
Taking down old steel rolling shutters of any size and thickness and make this smooth functioning by oil and greesing repair of anchoring rod, hasp and staple, push pull after functioning applied two coat of enamel paint after complete removal of existing surface complete all as specified and fixed this on same position complete as per directed.
Supply and Fixed in repair 15mm bore bib taps,fancy type, cast copper alloy, with capstan heads,chromium plated , screwed down, screwed for iron pipe or for brass ferrule complete.
S&F in repair CP stop valve fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe for 15 mm bore pipe complete.
Supply and fixed in repair vitreous china wash hand basin, white of size 550mm x 400mm with pedestal including and 32mm dia brass chromium plated waste coupling and PVC waste pipe complete including angle iron brackets complete
S&F in repair 15 mm Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete.
S&F in repair stainless single towel rail 600 mm long complete all as specified.
S & F in repair 15 mm dia Angle valve, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed.
S&F in repair Vitreous China urinals, full stall type white, (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete as specified.
S&F in repair urinal spreader of brass chromium plated suitable for 15mm dia pipe complete.
S & F in repair vitreous china squatting pan, 'Orissa' pattern size 580x 440mm white, with integral foot rests ( excluding flushing cistern and flush pipe ) complete as specified including PCC work etc
S&F in repair white vitreous china wash down water closet pan (pedestal pattern) with PVC white seat and seat cover with mild steel chromium plated or aluminised hinging device including connection to dowm pipe and flushing pipe complete all as specified.
S&F in repair brass CP health faucet 1.2m chain long easy flex tube in chrome finish & wall hook, complete all as specified.
S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete.
Supply & Fixing in repair for steel water tubing, galvanised, medium grade, with all fittings and fixed complete to walls & ceiling or laid in floors or concealed in walls etc of size of tubing 15 mm bore complete including taking of existing u/s pipe all as specified.
All as per item No 66.00 above, but size of tubing 20 mm bore.
S&F in repair 25 mm dia stainless steel drapery rod with complete stainless steel holder, brackets and end cap suitablecut to size and fixed in position, including Standard ring complete all as directed.
S&F in repair Brass chromium plated shower rose 150mm x 150 mm size with or without swivel joints, any size, including fixint to steel pipe or union complete all as specified and directed.
S&F 75 mm PVC (SWR) multifloor trap with grating including jointing with solvent cement complete.
Dismantling of 100/75 mm dia cast iron / PVC Pipe or reinforced concrtee drain pipes, jointed in cement mortar and taking out of trenches, if required.
Cutting into existing manholes for connecting new drains 150mm dia, making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, & reforming benching as required
Demolition and breaking up drain pipes salt glazed ware set in CM 150 mm bore pipe as specified.
M&L Concrete bed to 150mm dia drain pipes including packing under, & haunching against the sides of pipes after they are laid & tested; in PCC (1:4:8) type D-2 using stone aggregate complete as specified.
M&L RCC drain pipes class NP-2 laid in trenches & jointed as specified of 150mm dia complete as specified.
S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor ( Joining to be done with solvent cement ) including PVC brackets complete.
S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor ( Joining to be done with solvent cement ) including PVC brackets complete.
S&F in repair PVC (SWR) pipes single socketed in any length of bore 110mm with rubber ring joints fixed to wall all as specified and directed by Engr-in-charge.
S & F in repair for 75 mm dia PVC (SWR) bends any radius complete.
S & F in repair for 110 mm dia PVC (SWR) bends any radius complete.
Supply and fix 500 litres capacity triple layer, white coloured rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete including dismantling old water tank complete as specified.
Supply and fix in repair 1000 litres capacity triple layer, white coloured rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete ncluding dismantling old water tank complete as specified.
M&L for providing circular,raised platform of hight 20 cm below the tank and base dia 25 cm more than the external dia of tank for pvc cylendrical tank of capicity 500/1000 liters using pcc 1:3:6 type C1 using 20 mm graded stone aggregate with smooth finish including necessary form work etc.
S & F in repair 20 mm fancy type stop valves, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete
S & F in repair PVC valveless, syphonic action type flushing cistern 10 lirs capacity, low level, white with inlet, ball valve, float and handle incl brackets & flush pipe of polyethylene of low or high density or PVC, 32mm dia suitable for low level cistern complete.
M&L for providing 100 mm thick cement concrete type B1 1:2:4 using 40 mm graded aggregate complete all as specified and directed.
S&F in repair 15 mm Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 15mm- 142 gms)
S&F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm- 210 gms)
Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.
S & F steel window with side hung shutter and box type hinges with steel handle and steel peg stay with glazing bars dovetailed or welded to receive glass etc incl taking down old steel window complete as specified.
Ditto all as per item No 91.00 above but without glazing bars to receive wire gauge complete as specified.
S&F Steel ventilator with top hung shutter with out glazing bars to receive wire gauge etc including hinges steel peg stay etc complete incl taking down old ventilator complete as specified.
S&F 3mm thick figured glass pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complete.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete as specified.
Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete as specified.
S & F 35mm thick factory made 2 CHW plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde resin adhesive confirming to IS-710. The size of rails & style shall be as per IS-1003 complete as specified.
S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I complete as specified.
S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete as specified.
S&F for 30 mm thick Flush Shutters, Solid core construction, Single or double leaved rebating shall be square or splayed, with block board core and both face is covered plywood face panels free from twist or wrap in plane, complete all as specified and directed
S&F Aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws, complete all as specified.
S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified.
S&F Aluminium handles 150mm size, cast type, anodised complete as specified.
S&F 125mm size, aluminium (cast type) anodized, handle and fixed with screws complete all as specified.
S&F Aluminium, anodised, barrel tower bolts 125mm long of extruded section complete as specified.
M&L for preparation of new or prevously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel over a coat of pink primer complete as specified.
S&F butt hinges extruded brass with galvanised mild steel hinge pin bright polished and fixed of size 100mm complete as specified.
S&F aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) ventilator, partially glazed and partially louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.70 mm thick (Cat No 20036), half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aperture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete.
Hacking out old broken glass, any thickness, size, quality, or description, from frame nexc 1.5 Sqm each pane complete.
S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty nexc 0.5 Sqm each pane complete.
S&F for 3.0 mm thick figured glass ordinary quality and glazing with oil putty n.exc 0.5 Sqm each pane complete.
S&F in repair Aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws, complete all as specified.
S&F in repair 300mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified.
S&Fin repair Aluminium handles 150mm size, cast type, anodised complete.
S & F in repair for 150 mm floor door stopper of aluminium alloy body and tonge,anodised with hard drawn steel spring complete.
S & F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete as specified.
Supply fabricate & fix in position aluminium powder coated (minimum thickness of powder coating 50 micron of approved colour) three track window ( two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below, including taking down old window complete all as specified and directed. (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20831) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 20832) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20738) (d) Shutter Interlock Section shall be be of size 18.00 x 40.00 x 1.45 mm (Section No 20737) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.55 mm (Section No 20736).
Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc all as specified below complete including taking down old shutters with frame all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370). Note:- (i) Section No given above are of make Jindal, Contractor may use similar section of other make mention in Appx B (ii) Door shutters shall be fixed over existing Floor door spring. (iii) Lock will be measured & paid separately.
S&F 100 mm size mild steel body Mortise lock, vertical type, with 4 brass liver, fixed to aluminium door complete.
S&F in repairs Aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete.
Material & Labour for road side kerb with factory made Precast cement concrete block of mix 1:3:6 type C-1 using 20 mm graded stone aggregate, exc 100 mm in thickness & set in CM 1:4 complete
M&L framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete drilled for fixing of steel sheeting or other covering , Doors,etc. to be prepared for hanging or sliding with and including either hoks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering , running rails and guides) and hanging ; also fastening and fixing complete including dismentling of existing u/s gate etc.
rathore construction co.
M/s Bhavesh Construction Company
JAGDAMBA CONSTRUCTION COMPANY
UNIVERSAL INFRAPROJECT PVT LTD
MSR INFRATECH
SAI MAX INFRAPROJECTS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .