Maintenance work

Dismantling, removing and carefully stacking pressed tiles with weathering course etc., complete complying with standard specification and as directed by the departmental officers at site of work.

Repairing damaged Terrace tile area & Wall surface with waterproofing elastomeric coat by removing all existing paint, putty and Loose plaster over wall, clean surface preparation with metal brush & putty blade also complete touch up work with pop mixing with SBR Chemical. For walls & Terrace with SBR (Styrene Butadiene Rubber) / Acrylic primer added to the cement with 1:1.5 ratio apply one coats as a protection coating & to make the surface strong. Followed by two coat of elastomeric water proofing coating. The rate including labour charges, SBR/ Acrylic primer, Elastomeric, POP and scaffolding etc., complete complying with standard specification and as directed by the departmental Officers at site of work.

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers. (Second Floor)

Finishing the top of roof with one course of machine pressed tiles of size 230x230x20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Repainting the walls with two coats of best Indigo floor paint of approved colour and quality including preparation of surface, thorough scrapping and finishing neatly etc., complete complying with standard specification.

Providing the Curtain made out of H/L Jacquard flower design, embossed type of eden mill cloth, French pleeted, 5" border polypropline tape, with stiching and fixing in the rate inclusive of labour charges for fixing etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supply of plastic bucket Big Size for 20 litre capacity and good quality etc., complete complying with standard specification and as directed by the departmental officers.

Supply of plastic bucket Small Size for 5 litre capacity and good quality etc., complete complying with standard specification and as directed by the departmental officers.

Supply of plastic Mug Big Size for good quality etc., complete complying with standard specification and as directed by the departmental officers.

Supply of plastic Mug Small Size for good quality etc., complete complying with standard specification and as directed by the departmental officers.

Painting Old Plastered Wall Surface with Two finishing coats of ready mixed Interior (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting Old Plastered Wall Surface with Two finishing coats of ready mixed Exterior (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Applying painting over engraved / carved surface such as stone, cement plaster, wood or metal including all labours, material, tools etc., complete complying with standard specification.

Supplying and fixing solid core flush shutter of following type with thickness with necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 3 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm), 2 Nos 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers - Single leaf. Door Shutter Type : Thickness: 35mm thick

Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting Old wood work with Two coat of synthetic enamel ready mixed paint of approved quality and colour in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Collecting the scattered debries using tipper machinery from work spot and loading into the tipper lorry and conveying away the same to outside by lorry to a lead of 3km entirely with in city limit including loading and unloading charges and dumping in low places and levelling neatly etc., complete complying with standard specification and as directed by the departmental officers. (200 cft volume capacity)

Please Enable Macros to View BoQ information