GE (N) P/TOKEN- 36 OF 2025-2026 REPAIR TO SEWAGE LINE,SEPTIC TANK AND CONNECTED WORKS TO MD/OTM ACCN AT VARIOUS UNITS IN THE AREA OF AGE B/R (EAST) UNDER GE(N) PUNE

Amount

M&L for cleaning/clearing & maintenance of under ground sewage lines by manually or mechanically in any depth by removing of any type of blockage from sewage drain upto and incl 300mm dia of bore by rodding or any other means manholes to manholes including plugging of manholes temporarily as and when required and flushing with water after cleaning incl intermediate manholes. sludge water in form of semi solid/loose state will be disposed off the same(semi solid/liquid shall not be burried) including taking off manhole cover and refixing the same after cleaning. The operation shall be executed/carried out with any kind of sewage cleaning device to be included in the rate quoted by the contractor complete all as specified and as directed.

M&L for cleaning of blocked WC/Gully trap/Floor trap/Nahani trap upto and including first manhole by manual labour as well flushing with clean water making the WC seat, gully trap, floor trap operational complete all as specified and as directed by Engr-in-Charge.

Cleaning of blockage from manholes of any size and depth by removing cover slab and refixing in position including removal of sludge and sediments from manholes (work in foul condition) and disposing it away from the domestic premises and removing the garbages out side MD land complete all as specified and as directed.

Cleaning of septic tank of any size/depth and capacity by removal of sludge and sediments in dry or wet stage including sewage water using "septic tank cleaning lorries" having pumping arrangements (incl work in foul condition) and getting out and removing in a covered conveyance (with proper sanitation to avoid public health in danger) to a distance away from the premises of defence land and disposed off all as directed by Engineer -in-Charge complete. (Note: The location at outside MoD land for disposal of forieign materials obtained above shall be located by the contractor himself) Note :- The size of septic tank and the depth of sewage cleaned shall be measured (after free board ) for arriving quantity and the payment will be made accordingly.The removal of sludge and sullage are deemed to be included in the quoted rate)

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation for shafts, wells, cesspits, manholes, pier holes, pole etc n.exc 10sqm on plan and getting out soft/loose soil complete all as specified and as directed.

Demolition and breaking up drain pipes )salt glazed ware, AC or reinforced ) set in cement mortar for 150mm dia of pipe complete all as specified and as directed.

Demolition and breaking up drain pipes )salt glazed ware, AC or reinforced ) set in cement mortar for 200mm dia of pipe complete all as specified and as directed.

M&L for 100mm thick PCC type D-2,1:4:8 (40mm graded aggregate) as in foundation, filling in mass concrete etc complete all as specified and as directed

M&L for PCC 1:3:6 type C2 (using 40mm graded agg) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 150mm dia of bore pipe including demolition of existing old one with PCC complete all as specified and as directed.

-ditto- all as per item No 9 here in before but 200mm dia of bore

-ditto- all as per item No 9 here in before but 300mm dia of bore

S&F 150mm inner dia HDPE DWC( Double wall corrugated) Pipe manufactured according to IS:16098 and SN 8 stiffness class, laid and jointed with coupler with elastomeric sealing ring complete all as specified and as directed. Make : Prince (COREFIT) or equivalent

S&F 200mm inner dia HDPE DWC( Double wall corrugated) Pipe manufactured according to IS:16098 and SN 8 stiffness class, laid and jointed with coupler with elastomeric sealing ring complete all as specified and as directed. Make : Prince (COREFIT) or equivalent

S&F 600 x 600 mm FRP Manhole cover with frame to with stand load 5MT, complete all as specified and as directed. Make : Prince (DURAFIT) or equivalent

Removing building material exc 1.50 Km and not exc 5.00 Km out side the MD land including loading and unloading etc., where responsibility regarding place of deposition and obtaining permission from all authorities etc., in this regard will be of contractor and complete all as specified and as directed.

M&L in repair for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested including demolition of existing old one (salt glazed earthware, AC or reinforced pipes etc) set in cement mortar complete all as specified and as directed.

-ditto- all as per item No 16 here in before but 200mm dia of bore

-ditto- all as per item No16 here in before but 300mm dia of bore

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting our existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC(1:2:4) type B-1, smooth finished and reforming benching as required for any dia of pipe complete all as specified and as directed.

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exc 1.50m but n.exc 3.0m in depth as well as 10sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m as directed by Engr-in-Charge

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks exc. 10 cm in width, type C-1,1:3:6 (using 20mm graded agg) and setting in cement mortar 1:6 complete all as specified and as directed.

M&L for brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius in cement mortar 1:6 complete all as specified and as directed.

M&L for PCC type B-1, 1:2:4 (20mm graded agg) as in copings, kneelers, apex stones,bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and as directed.

Demolition of RCC slab roofs, floors (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and directed

M&L for RCC (Nominal mix) Type B1 1:2:4(20mm graded crushed stone aggregate) slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed

Use & waste for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exc 200mm thick(Horizontal or sloping) complete all as specified andas directed

M&L for Precast cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in cover slab for manholes set in cement mortar 1:6 complete all as specified and as directed. Note: Reinforcement will be measured and paid separately (use and waste of form work is deemed to be included).

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick wall surfaces, finished even and smooth using extra cement complete all as specified and as directed. .

M&L for extra form farming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds ,mitred stopped ends etc complete all as specified and as directed.

Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M & L Non-skid coloured ceramic floor tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm but not exc 0.09 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for non skid ceramic joint free tiles 7-8mm thick (square/ rectangular) polished, area of each tile exc 0.11sqm but n.exc 0.16 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with existing floors over 15mm thick screed bed or bedding of layer in CM 1:6 complete all as specified and as directed.

S &F for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L coloured vitrified ceramic tiles 8-10mm thick (square/rectangular) area of each tile exc 0.18sqm but not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

M&L Granite 16 to 18mm thick (table rubbed and polished) in steps,Jamps, Pillars, Windows, cills, platforms and like CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigments to match with marble shade of Granite over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:4) complete all as specified and as directed. Note : (a) The Unit rate quoted is included for Demolition of Stone Slabs and tiles of any description or thickness in floors

Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and as directed.

Demolition of cement concrete of any description as in surface channels and drains etc. and similar works complete all as specified and as directed.

M&L 75 mm thick PCC (Plain cement concrete) type D-2 1;4;8 (40 mm graded aggregate ) as in sub base complete all as specified and as directed.

M&L hardcore of gauge not exc 63 mm deposited spread and leveled in layers not exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine crusher/M sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for chequered cement concrete tiles 25cmx25cmx25mm thick , with grey cement and pigment set jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed or beding layer in cement mortar 1:6 complete all as specified and as directed.

M & L Glazed coloured ceramic tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed. by Engr-in-charge.

M&L for Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in backing coat of skirting /dado complete all as specified and as directed.

S&F in repairs aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass incl necessary channel frame work, including rubber gasket and aluminium beading complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames of stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F Sheet glass, ordinary quality 4 mm thick and glazing with oil putty or fixed with beads in square n.exc 0.5 sqm in each pane complete all as specified and as directed.

S&F 4 mm figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each complete all as specified and as directed. pane

S & F40mm dia, cup board knobs fixed with screw and washer of mild steel, bright finish complete all as specified and directed.

Dismantling of boarding , any description , fixed in any position with nails including battens etc complete all as specified and as directed.

M& L 2nd claas hard wood plain fillets square/ rectangular or triangular in section, wrought secured with nails or brads sectional area exc 13 & not exc 25 sqcm complete all as specified and as directed.

M&L for 18mm thick ,solid, decorative type, WPC (Wood Polymer Composite) board, for kitchen cabinet and drawer,comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water / moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on edges and fixing with necessary full body threaded star headed counter sunk S.S screws, etc all as per direction of Engineer- In- Charge. (Note: hinges shall be paid separately)

S & F soft close telescopic drawer channel, 550mm length, sidemount type, suitable for weight upto 35 Kg complete all as specified and as directed by Engr-in-charge.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm flap when open complete all as specified and as directed.

S & F Stainless steel drawer handle ,100 mm size, decorative type fixed with SS screws complete all as specified and directed by Engr-in-charge.

S & F SS Auto soft closing concealed cabinet hinges, bright finish or electrogalvanised complete all as specified and as directed.

S & F Stainless steel drawer /cabinet chest pull/kadi handle ,75 mm size, fixed with SS screws complete all as specified and directed by Engr-in-charge.

S & F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.

M&L for 15mm thick plastering in CM 1:4 on brick or concrete wall surfaces fair and even with 2% of WPC on cement complete all as specified and as directed.(Note:WPC shall be measurned and paid in separatetly)

Supply only integral water proofing compound

M&L for preparation of new plastered wall surface of any description, width or girth, and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection 75mm thick and finished even and smooth without using extra cement, including demolition of existing cement concrete complete all as specified and as directed.

M&L for coloured, textured design heavy duty exterior tiles of size 300mm x 300mm x10 mm thick as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) and dismantling of existing tiles of any description complete all as specified and as directed. Make: Johnsun Endura textured design or equivalent of Kajaria/ Somani as approved by GE.

M&L for demolition & complete removel of sunken floor, water proofing plaster coated with bitumen as special water proofing slurry coat as per manufacturer instruction all concrete/ brick surfaces & fixed 40mm bore spout pipe on external wall with proper sealing plaster and after drying the floor fiixed of IWC with CI pipe, joints with special plastic sealant to prevent shrinkage and allow some movement then 40mm thick PCC 1:3:6 type C2(20mm graded agg) over filled with dry lean concrete 200mm thick M-5, type E2 (40mm graded agg) as in sunken floor complete all as specified and directed by Engr-in-charge

S&F in repair 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall incl GI clamp with screw complete all as specified and as directed..Make:ISI marked

-Ditto- all as per item No 68 here in before but 75mm dia fixed on wall complete all as directed

S&F in repair 110mm dia PVC (SWR) bends in any radius fixed with pipe complete all as specified and as directed.Make:ISI marked

-Ditto- all as per item No 70 here in before but 75mm dia fixed on wall complete all as directed

S&F in repair 110mm bore PVC (SWR) branch piece, single (Y) equal or unequal fixed on wall complete all as specified and as directed.

-Ditto- all as per item No 72 but 75mm bore

S&F in repair 110mm bore PVC (SWR) junction, single (T) equal or unequal fixed on wall complete all as specified and as directed.

-Ditto- all as per item No 74 but 75mm bore

S&F in repair 110mm bore PVC cowl complete all as specified and as directed.

S&F in repair 75mm bore PVC cowl complete all as specified and as directed.

S&F in repair stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia of bore complete all as specified and as directed.

-Ditto- all as per item No 78, here in before but on 75mm dia of bore

-Ditto- all as per item No 78, here in before but on 75mm dia of bore

S&F in repair vitreous China squatting pan Orissa pattern size 580 x 440mm white with integral foot rest (excluding flushing cistern and flush pipe), including P-trap (PVC) 100 mm dia., connection to flushing pipe, anti-syphonage pipe complete incl making good to floor complete all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan (pedestel pattern) white including trap, connection to drain (outgoing pipe) and to flushing pipe, anti-syphonage pipe, including PVC jet for Pedestal pattern pan including 450/600mm long PVC connection including PTMT nuts and plastic water closet seat of white in colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed.

S&F in repair vitreous china half stall type, white bowl urinal flat back white including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement paste, incl 5Ltrs capacity PVC automatic flushing cistern with brackets 32mm dia PVC flush pipe and discharge pipe, grating and union for discharge pipe complete all as specified and as directed.

S&F urinal spreader CP 15mm size fixing for Urinal, Half stall type, complete all as specified and as directed.

S&F in repair white counter top Basin (self-rimming) Oval shape of size 550mm x 430mm x 195 mm fixed in position including waste coupling and PVC waste pipe, 32mm dia. complete Make: Perryware Model Aquarius, Cat Part No – C0466(SP) or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair 10 ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve float ovel handle including brackets and PVC flushing pipe of polyethylene of low or high density or PVC 32mm dia complete all as specified. Make : Cera/Prayag/Johnson Pedder.

S&F in repair chromium plated gratings 75mm dia with drain hole all as specified and directed Make: ISI Marked or of equivalent make as per Appx'A' as approved by GE

S&F in repair chromium plated gratings 100mm dia with drain hole complete all as specified and as directed. Make: ISI Marked or of equivalent make as per Appx'A' as approved by GE

S&F in repairs hand shower (health faucet) of cast copper alloy chromium plated with 8mm dia, 1.2m long flexible tube and wall hook complete all as specified and directed by Engr-in-charge. Make : Cera/Prayag or of equivalent make as per Appx 'A' as approved by GE

S & F in repair brass chromium plated soap dish , fixed to wall with CP brass screws, complete all as specified and directed. Make: Johnson Fusion series Cat part No: T3252C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs bib cock long nose quarter turn suitable for 15mm bore pipe long body with flange fancy type brass CP with, screwed for iron pipe or brass ferrule complete all as specified. Johnson VIVA new series Cat part No: T4806C or of equivalent make as per Appx 'A' as approved by GE

S&F in repairs Bib taps, brass chromium plated fancy type with cruch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed for 15mm bore complete all as specified and as directed.

S&F in repairs Pillar taps fancy type cast copper alloy, with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe and fixed 15 mm bore complete all as specified and as directed.

S&F in repairs pillar taps suitable for 15mm bore pipe long body fancy type brass CP with screwed down screwed for iron pipe or brass ferrule quarter turn complete all as specified and as directed. Make: Johnson VIVA new series Cat Pt No: T4801C or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion' series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repairs wall mixer brass chromium plated quarter turn with provision for over head shower with 115 mm long bend pipe on upper side connecting legs and wall Flanges suitable for fixing with GI pipes 15mm dia complete all as specified and as directed. Make: Jaquar Cat Part No FUS- 29273UPR Fusion Series or of equivalent make as per Appx 'A' as approved by GE.

S&F in repair angle cock with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified and as directed. Make: Johnson Eco Cat part No: T3910C or of equivalent

S&F in repairs two way bib taps with wall flange quarter turn suitable for 15mm bore pipe long body fancy type brass CP, screwed down screwed for iron pipe or brass ferrule complete all as specified and as directed. Make Johnson VIVA new series Cat part No: T4808C or of equivalent make as per Appx 'A' as approved by GE.

S&F in replacement 75/100mm bore PVC (SWR) floor trap plain with CP grating including jointing with solvent cement to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate complete all as specified and as directed.

Factory made single extruded WPC (Wood S&F Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 25mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

M&L for removing existing brick bats etc from sunken and Sunken floor treatment by providing injection pressure grouting treatment using cement slurry mixed with grout admixtures non shrink additive using 40 PSI pump complete and applying two coats of brush bond acrylic polymer modified cement based coating thickeness 1mm or two coats of pidifin 2K acrylic polymer water proof coating including necessary surface preparation, providing 20 mm thick water proofing screed bed/plaster in CM 1:4 mixed with conplast X42IIC @ 100 ml or Pidiproof LW @ 200 ml per bag cement. Two coats of Nitro Proof 100 bitumen based water proofing coating over plastered surface complete as per specification of chemical resistant coating complete all as directed by Engineer-in-Charge. Note : The work shall be executed through authorized applicator of M/S Fosroc / M/S Pidilite using the materials supplied by M/S Fosroc chemicals (India) Pvt Ltd or M/S Pedilite Industrials Ltd and In accordance with their repective manufacture's instructions.

M&L for cement concrete 1:7:12 using brick aggregate of size 40 to 60mm as in sunken portion all as directed.

Supply and fix in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

Supply and fix in repairs brass chromium plated shower rose with or without swivel joints, 125mm size including fixing to 15mm dia steel pipe, complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning or removal to store 15mm bore complete all as specified and as directed.

All as per Item No: 106 but for 20 mm bore

Taking down 75 /110 mm dia . old PVC (SWR) pipes fixed on walls complete all as specified and as directed.

Taking down old CI floor traps with waste pipe of length approximately 3.20 meter embedded in concrete and making good the disturbed portions with PCC 1:2:4 and S&F PVC floor trap of size 75 mm complete all as specified and as directed. Note : S&F of waste pipe will be measured and paid separately in relevant items here in after.

Dismantling of PVC water tank exc 500lit & n exc 1000 lit capacity and removing to store complete all as specified and as directed.

Dismantling of PVC water tank 250 lit n exc 500 lit capacity and removing to store complete all as specified and as directed.

S&F moulded polyethylene 500 ltr water tank storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Eng5r-in-charge.

S&F moulded polyethylene 1000 ltr water tank storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Eng5r-in-charge.

S&F in repairs 20 mm Ball brass valves, high pressure, with polythene float and flynut cimplete screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking up or down 20 mm bore steel /PPR/CPVC tubing or any other pipe and connections, and removing to store for taking in account of credit and fixing of CPVC pipes 25mm outer dia SDR 13.5 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified and as directed.

Taking up or down 15mm bore steel /PPR/CPVC tubing or any other pipe and connections, and removing to store for taking in account of credit and fixing of CPVC pipes 20mm outer dia SDR 13.5 & Plain CPVC SDR 11 fittings onwalls/ceiling or laying in floors complete all as specified and as directed.

S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 15 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc in repairs complete all as specified and as directed.

S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 20 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc in repairs complete all as specified and as directed.

S&F of 3- layer PP-R Polypropylene random copolymer) concealed Outer diameter of pipes in 25 mm dia SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water apply all PP-R plain & brass threaded polypropylene random fittings laid in floors,wall and ceilling etc in repairs. Note for item No :- (a) The unit rate shall be include for taking down existing pipe and connections and all fittings as directed. (b) The unit rate shall include the cost of short lengths, with all pipe fittings such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc and fixing accssories such as pipe hooks, screws clamps etc

S & F Unplasticised PVC pipe 50mm dia of pressure rating 10 kgf /cm2 fixed complete to walls, ceiling or in floors etc complete all as specified and as directed.

S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings in short length and fixed complete to walls, floor, ceiling etc all incl taking down existing G I tubing complete all as specified and as directed.

All as per Srl item No 121 here-in-before, but taking down and fixing only

S&F in repair 20mm bore gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as directed. Make:ISI marked

S&F in 15mm dia of bore PVC connection fixed with iron pipe with PTMT nuts in 450mm long complete all as specified and as directed. Make:Prayag/Polytuf

Dismantling the existing unserviceable gully trap including chamber and material and labour for provision of new salt glazed stoneware gully trap, square or round mouth type "P" of size 180X150mm, including setting and jointing in cement mortar 1:1 in chamber with plain cement concrete base in PCC 1:2:4 type B1, brick work in cement mortar 1:4, rendering in cement mortar 1:4, all around finished even and fair using extra cement, Precast cover slab in RCC 1:2:4 type B1 using 20mm graded stone aggregates, reinforcement with 6mm dia in both ways etc, including provision of handle etc complete all as specified and as directed.

S & F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed

S&F in repair plastic closet seat white closed pattern with flat bottom and cover and mild asteel chromium plated hinging device for pedestal pattern WC (anglo indian type) complete all as specified and as directed.

S&F in repair 32mm dia PVC waste pipe for WHB, kitchen sink of length 1.0mtr incl coupling incl fixing the same complete all as specified and as directed Make;Prayag or ISI marked

S&F for factory made 50mm thick, 950mmx650mm manhole cover with additional frame for fixing, of fixing of pre cast RCC 1:2:4 type B-1 (using 20mm graded agg) finished the surface even and fare including reinforcement MS TMT bars 8mm dia @ 125mm centre to centre bothways and set in CM 1:4 and handles including demolition of RCC (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and as directed.

-Ditto- all as per item No 130, here in before but 600mmx450mm size complete all as directed

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in Charge

S&F for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, frame work for water staging and like to similar work etc confirming Fe 410-W (Gde- E-250) quality B complete all as directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge

Taking down chowkhats or frames with shutter (with out taking off shutters from the frames) size not exc 1.50 sqm each and all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube. A minimum of 6Nos screws to be provided for each frame all as specified and as shown in SSR part II drawing on page No. 160 and as directed. Note: The quoted rates are deemed to be included for cutting holes, providing concrete for hold fast and making good to the disturbed surfaces.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified, shown in SSR part II drawing on page No. 156 and as directed.

S & F 100 mm size Butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S & F 150 mm size Aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F of 100mm extruded aluminum alloy handles , fabricated type, anodised complete all as specified and directed in repairs .

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

Removing of vegitation/plantation on the wall, roof or any description upto three stories of building including necessary scaffoldings and roots superficial area n.exc 2.0sqm each and making good of surfaces by applying chemical treatment with GLYPHOSATE 41% for killing the roots of Plants, filling of holes with concrete and making good.incl removing / refixing of GI/CI pipe lines complete all as specified and as directed. (Note:Brick work, plaster and CI/GI lines shall be measured and paid separately)

Excavation of post holes (or similar holes) each n exc 0.5cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm for soft/loose soil complete all as specified and as directed.

S & F Mild steel work for posts and struts in fencing of angle iron including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

S & F for mild steel galvanised chain link fencing of 3mm dia GI wire, 50mm x 50mm mesh size and weight not less than 2.5Kg per Sqm conforming to IS: 2712, galvanised coating of type heavy as laid down in IS: 4826 including line wires fixing to any type of standards, rails, straining bolts etc. including provision of binding wire, make as approved by GE including dismantling existing chain link fencing complete all as specified and as directed.

M&L for mild steel round bars10 mm dia and over, cut to length, bent to shape required, for stiffners and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 05cm and n exc 10cm long, diameter of neck 5 to 10mm complete all as specified and as directed

S & F for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening,conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

M & L for preparing new steel and iron surfaces any description over 10 cm in width or girth, priming with red oxide and applying two coats of synthetic enamel paint complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

N B ENTERPRISES (BID ID -3498369)

Gauri Associates (BID ID -3505013)

Ray Enterprises (BID ID -3505011)