Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹15,100
Closing Date
19 Jul 2021, 5:00 pmClosed
Executive Engineer PHE Mechanical Rural Division
Executive Engineer PHE Mechanical Rural Division
Repairs/rewinding to 20HP Submersible motor at WSS Befina
2021_PHE_130734_3
PHE/MRD/TS/ 27 of 07/2021
Open Tender
Miscellaneous Works
Item Rate
3 days
Srinagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
Yes
Executive Engineer PHE Mechanical Rural Division
Yes
26 Jul 2021
14 Jul 2021
20 Jul 2021
14 Jul 2021
19 Jul 2021
14 Jul 2021
Amount
Repairs to 20HP submersible motor by way of decoupling of damaged 3phase submersible motor form the pump assembly at site. Shifting the de-coupled motor from site to the workshop in a private load carrier to be arranged by the firm. At workshop the motor is to be dismantled by way of opening all nuts, bolts, cover plates etc and the damaged burnt out windings extracted from all stator slots by special tools and tackles. skilled man power, after extraction of the windings from the stator the same shall be rewound by using PVC insulted cu-wire of proper gauge and specification as per sample and inserted back in the stator slots of the motor as per actual pitch and turms. The job includes insulation of the windings by proper insulating material, tape etc. And assembling back of rotor, stator, cover plates, all nuts and bolts of the motor. The job includes bench test of the motor at the workshop. The repaired motor shall then be shifted back to site from workshop in a private load carrier to be arranged by the firm to the site and the motor shall be recouped with the pump. All power connections shall be reconnected with the motor and pump motor assembly, lowered back into the bore well by refitting each of the column pipes one by one, tightening all the nuts and bolts and inserting the new washers in between the flanges where ever required. After complete lowering the unit shall be tested on full load. The job includes providing and fitting of worn out nuts/bolts of assorted size and washers of the column pipe of the site. Old scrap shall be retained by the firm The rate quoted by the firm shall include cost of old scrap/wire @ Rs.350/Kg.
Providing, inserting and fixing/tightening of new bronze bushes in the lower and upper manifolds of the above repaired motor in place of damaged bushes by way of first extracting the old damaged bushes from the manifolds by means of tools and tackles, skilled man power & making the inner surface of the manifolds smooth having high precision and accuracy by machining on lathe. The job shall include casting, fabrication, machining and finishing of the new bushes before being fixed into the manifolds. Old scrap shall be retained by the firm The rate quoted by the firm shall include cost of old scrap/bushes @ Rs.325/Kg.
M/S KHAN ENGINEERING WORKS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .