Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Rejected-Technical | Rejected-Technical Non responsive |
| 4 | Rejected-Technical | Rejected-Technical Non responsive |
| 5 | Rejected-Technical | Rejected-Technical Non responsive |
Tender Value
₹5.9 L
EMD Value
₹11,720
Closing Date
7 Aug 2020, 6:00 pmClosed
Executive Engineer
PWD Division Udhampur
Construction of prefabricated shed for accommodation of Magistrate (S) at Zero point, Police naka, Chenani
2020_PWDJK_101319_1
ENIT No. 19 of 2020-21 dated 27.07.2020
Open Tender
Civil Works
Item Rate
30 days
Udhampur
Please refer Tender documents.
2 documents required · 2 mandatory
₹600
Executive Engineer PWD Division Udhampur
₹11,720
3 Feb 2021
28 Jul 2020
8 Aug 2020
28 Jul 2020
7 Aug 2020
28 Jul 2020
Amount
Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width & for shafts, wells, cesspits & the like not exceeding 10 sqm on plan, depth upto 1.5 m including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled & neatly dressed. Extra for every additional lead of 25 mtr beyond 1 mtr upto 25 mtr and deposit to a level of 1.5 mtr. All kind of soil
Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work upto plinth level 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) Crushed incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete
Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone agg. 20 mm nominal size) crushed incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete
Centering & shuttering incl. strutting , propping etc. and removal of form work for Foundations, footings, bases of columns etc.
Filling available excavated earth (excl. rock) in trenches , plinth , sides of foundations etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming & watering, lead up to 50 m & lift up to 1.5 m.
Providing & Laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Crushed incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete
Providing & laying/ fixing ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITCO, ORIENT, KAJARIA, SOMANY or equaivalent make in colour shades excpet White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of cement mortar 1;4 (1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigments etc. complete.
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, C.P brass hinges and rubber buffers, 10 ltr low level vitreous china flushing cistern with fittings, C.I/ M.S brackets 40 mm diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid with white vitreous china flushing cistern & C.P flush bend.
Providing & fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White vitreous china wash basin size 630 x 450 mm with a pair of 15 mm C.P. brass pillar taps.
Providing & fixing long nose bib cock/ mixer for wash basin
Providing & fixing floor trap
Providing & fixing G.I pipes complete with G.I fittings including trenching & refilling etc. (external work) 20 mm dia nominal bore
Providing & fixing soap case of approved quality and made
Providing & fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Providing & fixing C.P. brass angle valve for basin mixer & geyser points of approved make conforming to IS: 8931. 15 mm nominal bore.
Providing & fixing P.V.C waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia.
Providing & fixing on wall face unplasticised- Rigid P.V.C rain water pipe confirming to I.S – 13592 type –A incl. jointing with seal ring confirming to I.S- 5382 leaving 10 mm gap for thermal expansion 110 mm dia
Providing and fixing of prefabricated structure with MS frame 113.5x113.5x4.8 mmm vertical post and tying with existing slab anchoring with MS plate 16 mm at bottom & 12 mm on top with nuts and bolts and with 122x61x3.6 mm rectangular hollow section tile rafter, web member 38c38c2.6 mm, 25x25x2.6 mm and 50x50x29 mm with roofing of PVC painted corrugated sheet wall panels shall be 50 mm thick fibre concrete fixed with 50 mm wide 'U' chanels with suspended ceiling 595x595x6 mm thick calcium silicate weather prrof ceiling tile level on T.Grid system, 24 mm wide suspension system the windows shall be made of powder coated. 14 gague aluminium section 2 1.2"x 2 1.2" and shutter section 2 1/2"x1 3/4" two track with fixed wire mesh and sliding with clear glass door shall be made of powder coated hinged door in aluminium section 2 1/2"x 2 1/2" frame and 3"x1 3/4" door section with 5.5 mm thick float glass panes and 6 mm thick ACP sheet as per the directions of the engineer in charge including all assessories fittings and fixtures all assessories painted with anti- fungal water proofing painted on wall inside, outside with two coats ofr cement primer on tow coats of white cement putty 2 mm thick. all hardware fittings to doors, windows and carriages upto working site at level 4th plinth artea of the finished, prefabricated structure to be measured for payment including disposal of unserviceable material (Complete job)
Providing & placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintex, Electroplaste Star, Lotous or equivalent having valid ISI License). (1000 ltr capacity)
M/S MEHRAB BUILDERS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .