Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAdmitted-Finance | ₹1.7 L | L1 | Admitted-Finance |
| 2 | L2₹1.7 LAdmitted-Finance | ₹1.7 L | L2 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/s Shaheen Enterprises L1 | M/S MIR ELECTRICALS and MECHANICAL ENG WORKS L2 |
|---|---|---|---|---|---|
| 1.00 | Supply Installation and Testing and commissioning of three phase LT Prodigy meter on the service line at the substation as per the following specifications:
Connection Type : Direct
Wiring : Three phase 4 wire
Voltage rating : 230/240 V (L-N)
Current Rating : 40 to 200 A
Accuracy : Class 1
Frequency : 50 Hz ±5%
Burden Voltage Circuit : < 1.0 W ,1.5 VA per phase
Insulation class Protection : Class II
Impulse withstands : 10 Kv
Weight : 4.5 Kg(approx.)
Enclosure: Double insulated glass filled polycarbonate
Terminals: Thread through design suitable for current up to 200 A.
Sealing : 95% non-condensing
The job includes cabling, thimbling if required as per site Requirement. | 2 | Jobs | 22,999 ₹45,998 | 21,000 ₹42,000 |
| 2.00 | Providing, fitting, testing and commissioning of Canopy Type Changeover Switch for selection between two transformer incomers (two separate service lines), with the following specifications:
• Rating: 400 Amperes
• Type: Front-operated, Off-load, 4-pole manual changeover switch
• Voltage: Suitable for 400 V ±15%
• Frequency: 50 Hz ±3%
• Operation: Mechanical interlocked arrangement to prevent parallel operation of both transformers
• Indications: 3 Nos LED phase indicators for each incomer (total 6 Nos)
• Mounting: Weatherproof canopy type enclosure suitable for outdoor installation Complete with internal wiring, phase indication lamps, termination, testing and commissioning, complete in all respects. | 1 | Job | 49,000 ₹49,000 | 33,000 ₹33,000 |
| 3.00 | Providing and fitting of long radius 150 mm dia. C-Class GI pipe Bends flanged on both sides, flange conforming to Table-17. The flange welding shall be carried out in double layers using reputed make electrodes from inside and outside of pipe to form strong welding joint. | 6 | Nos | 5,198 ₹31,188 | 7,200 ₹43,200 |
| 4.00 | Providing and fitting of short radius 100 mm dia. C-Class GI pipe Bends flanged on both sides, flange conforming to Table-17. The flange welding shall be carried out in double layers using reputed make electrodes from inside and outside of pipe to form strong welding joint. | 2 | Nos | 3,300 ₹6,600 | 3,100 ₹6,200 |
| 5.00 | Providing and fitting of heavy-duty GI Reducers having one side 150 mm dia. And other side 100mm dia flanged on both sides, flange conforming to Table-17. The flange welding shall be carried out in double layers using reputed make electrodes from inside and outside of pipe to form strong welding joint. | 4 | Nos | 2,400 ₹9,600 | 2,600 ₹10,400 |
| 6.00 | Providing of GI C-Class Nipples having 150mm dia both sides flanged 1 feet long , flange conforming to Table-17 | 4 | Nos | 2,730 ₹10,920 | 3,300 ₹13,200 |
| 7.00 | Providing and fitting G.I Channel Flat of Various sizes including clamps | 70 | Kgs | 138 ₹9,660 | 150 ₹10,500 |
| 8.00 | Providing and fitting of Galvanized nuts, bolts of various sizes as per site requirement | 100 | Kgs | 80 ₹8,000 | 150 ₹15,000 |
Tender Value
₹1.7 L
EMD Value
₹3,422
Closing Date
14 Mar 2026, 11:00 amClosed
Executive Engineer JS PHE Mech. Rural Div. Sgr.
Executive Engineer JS PHE Mech. Rural Div. Sgr.
Balance Works to be carried out at Water Supply Scheme Chinar Colony Kawoosa
2026_PHE_305220_1
PHE/MRD/TS 71 OF 03/2026
Open Tender
Miscellaneous Works
7 days
Srinagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹100
Executive Engineer JS PHE Mech. Rural Div. Sgr.
₹3,422
14 Mar 2026
4 Mar 2026
14 Mar 2026
4 Mar 2026
14 Mar 2026
4 Mar 2026
Supply Installation and Testing and commissioning of three phase LT Prodigy meter on the service line at the substation as per the following specifications: Connection Type : Direct Wiring : Three phase 4 wire Voltage rating : 230/240 V (L-N) Current Rating : 40 to 200 A Accuracy : Class 1 Frequency : 50 Hz ±5% Burden Voltage Circuit : < 1.0 W ,1.5 VA per phase Insulation class Protection : Class II Impulse withstands : 10 Kv Weight : 4.5 Kg(approx.) Enclosure: Double insulated glass filled polycarbonate Terminals: Thread through design suitable for current up to 200 A. Sealing : 95% non-condensing The job includes cabling, thimbling if required as per site Requirement.
Providing and fitting of long radius 150 mm dia. C-Class GI pipe Bends flanged on both sides, flange conforming to Table-17. The flange welding shall be carried out in double layers using reputed make electrodes from inside and outside of pipe to form strong welding joint.
Providing and fitting of short radius 100 mm dia. C-Class GI pipe Bends flanged on both sides, flange conforming to Table-17. The flange welding shall be carried out in double layers using reputed make electrodes from inside and outside of pipe to form strong welding joint.
Providing and fitting of heavy-duty GI Reducers having one side 150 mm dia. And other side 100mm dia flanged on both sides, flange conforming to Table-17. The flange welding shall be carried out in double layers using reputed make electrodes from inside and outside of pipe to form strong welding joint.
Providing of GI C-Class Nipples having 150mm dia both sides flanged 1 feet long , flange conforming to Table-17
Providing and fitting G.I Channel Flat of Various sizes including clamps
Providing and fitting of Galvanized nuts, bolts of various sizes as per site requirement
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
BOQ_991307.xls
BOQ • 0.31 MB
corrigendumex.pdf
PDF • 0.36 MB
Download all tender documents and submit your bid