REPAIRS TO PLASTERING FLOORING KITCHEN CABINETS CUPBOARDS AND OTHER B R REPAIRS IN OFFR MD ACCN UNDER AGE B R I AT GE DSSC WELLINGTON

Amount

Dismantiling of floor &hearth wall tiling including cement motar bedding of any description laid bedded and pointed all as specified.

M&L for nonskid coloured ceramic tiles 7mm thick area of each tiles exeeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed neat cemet slury and pointed in coloured cement to match complete all as specified. (Notes : Screed bed measured and paid separately)

M&L for nonskid coloured ceramic tiles 7mm thick area of each tiles exeeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed neat cemet slury and pointed in coloured cement to match complete all as specified. (Notes : Screed bed measured and paid separately)

M&L, glazed ceramic coloured tiles (600x300)x 7mm thick incuding boarder tiles on vertical surfaces such as skirting, dados and risers to steps etc. set and jointed neat cemet slury and pointed in coloured cement to match complete all as specified. (Notes : Plaster shall be measured and paid separately)

Material and labour for coloured light shade vitrified tiles 600 x 600 x 8 to 10 mm size as in flooring set and jointed in neat cement slurry and pointed in coloured cement to match, on flooring,skirting all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:4on fair faces of brick/stone or concrete surfaces for backing of dado/skirting all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 all as specified and as directed. .

Demolition of brick tiles or terracing tiles, single layer on roofs including removal of existing water proofing treatment of any description and removal of debris to out side MD land complete all as specified and as directed.

Material and labour for plain Cement Concrete 1:2:4 type B1 using 20 mm graded stone aggregare with WPC completed 40 mm average thickness as in padding concrete for roof treatment, floor/chejjas etc. finished even and fair all as specified and as directed (WPC shall be measured and paid separately)

M & L 10mm thick cement screed in cement mortar 1:3 mixed with liquid water proofing compound FOSROC's complast 421 IC @ 130ml per bag of cement including a bonding coat of FOSROC's Nito bond AR cement slurry for roofcslab/ floor complete all as specified (liquid water proofing compound are measure seperately)

M&L water proofing treatment by applying primer @ 0.20kg per sqm, providing and laying 3mm thick APP modified water proofing memebarane weighing not less than 3.6 kg per sqm reinforced with non woven polyester matt weighing not less than 100 gm per sqm having softeninbg point not less than 140º centigrade, longitudinal tensile strength not less than 300 N per sqm tearning strenght of 100n by torch on application including minimum over lapping 10cm on either side and 15cm on ends and applying a coat of bitumen primer @ of 0.20 Kg/Sqm and finishing with bituminious aluminium paint applied @ 0.10 Kg / Sqm and finished all as per manufacture's instruction and as directed. Note: The work shall be carried out by authorised applicators of manufacturer..

Dismantling water tanks Capacity of tank exc 250 & n. exc 500 ltrs removing to store all as specified.

Supply and fixing rotational moulded polyethylene water storage tanks 500 litres capacity (cylindrical,vertical with closed top) hoisted and fixed in position all as specified and as directed.

Dismantling of water storage tank of capacity exc 500ltrs & not exc 1000ltrs and removing to store yard.

Rotational moulded polyethylene water storage tank of 1000ltr capacity (cylindrical vertical with closed top), triple layered, hoisted and fixed in position incl all accessories complet all as specified and directed. Make : Sintex, Star, Poly con, Fusion.

Dismantling existing tanks exc. 250 lit & n. exc. 500 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Dismantling existing tanks exc. 500 lit & n. exc. 1000 litres capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Tank Lid PVC (Thread type) with connecting accessories suitable for water tank 500/1000 ltr cap (Make :- Sintex/Polycon)

Taking down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm bore complete.

Taking down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm bore complete.

Taking down steel tubing and connections, including cleaning for refixing or removal to store of 25 mm bore complete.

Refixing of old GI steel tubes and connections of 15 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections of 20 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

Refixing of old GI steel tubes and connections of 25 mm bore in new or old position, any grade, to walls, ceiling, floors, etc complete all as specified and as directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor of 15mm bore in short length all as specified and as directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor of 20mm bore in short length all as specified and as directed.

S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor of 25mm bore in short length all as specified and as directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), colour white, closed pattern with flat bottom and seat cover and mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain (or outgoing pipe) and including taking down complete all as specified and as directed.

S&F in repairs, vitreous china water closet squatting pan orissa pattern, 580 x 450 mm size with integral foot rests, colour white and P-trap including connections to drain (or outgoing pipe), lime concrete bedding complete all as specified and as directed. Make : Johnson Model - Pearl Orissa Pan P0360PW OP23 or equivalent Prayag/ Parryware/Hindware as approved by GE.

S&F in repair PVC valveless, syphonic action type, 10 Ltr capacity, flushing cistern low/high level, white with inlet, ball valve, float and handle including brackets and connections and including taking down complete all as specified and as directed. Make : Johnson Ultima Single Flush - P2827PW or equivalent in indware/Cera /Parryware /Prayag as approved by GE.

S&F wash basins, vitreous china of size 550 X 400 mm including cutting for and pinning in ends of brackets or erecting stand, inclusive of fixing of supply and waste pipe 32 mm bore, bottle trap, 15 mm bore pillar tap, 450 mm long PVC connections with PTMT unions, etc complete all as specified and as directed.

S/F in repairs low density polyethelene pipes (LDFE) of pr. Rating 6 Kgs/Sqm fixed complete to walls 40mm bore.

S/F in repairs seat cover for pedestal pan white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

S/F in repairs bib taps cast copper alloy fancy type screwed for iron pipes 15mm chromiuim plated.

S&F in repairs Bib cock (Two in one) complete all as specified and as directed.Make-Jaquar CON-041KN or Prayag cat No-8312 or equivalent.

S/F in repairs Pillar taps(long thread) cast copper alloy fancy type 15mm thick long thourght.

S&F in repairs 15mm bore stop cock, fancy type, cast copper alloy, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

Supply and fix in repairs Overhead Shower 100mm dia round shape, ABS Body Chrome Plated with Gray Face Plate, Single Flow, with Rubit Cleaning System as per Cat No.OHS-1989 with shower arm 190mm Long as per Cat No.SHA-477 of Jaquar or Prayag cat No-BOS - 92 or equivalent of other specified makes connected to 15mm bore pipe etc., complete fixed all as specified and as directed .

Supply and fix in repairs health faucet (hand shower) chromium plated with 1.0metre long easy flex tube 8mm dia with wall hook as per Cat No.ALD-565 of Jaquar or MAC-3050 of Marc or T9961A1 of Parryware or Cat No.BEA-41 of Prayag or equivalent of other specified makes, screwed for two way bib taps etc., complete all as specified and as directed.

S&F in repair 15 mm dia bore angle cock chromium plated cast copper alloy fancy decorative type with flange plate including taking down complete all as specified and as directed.Make:Jaquar CON 53KN or Prayag cat No-8310 or equivalent

S&F in repair stainless steel soap dish of size min 100 mm dia or square or rectangular complete all as specified and as directed.Make-Jaquar ACN-1131N or Prayag cat No-BA 15G or equivalent.

S/F in repairs towel rack 600mm Make e Jaquar cat no:1181or Prayag cat No-BA 22 or equivalent.

S/F in repairs tubularTowel rail brass cromium platd 20mm dia D type, 600mm long all as specified.

S & F in repair Sink mixer with regular spout Table mounted Make :- Prayag Cat No- 6550 or equivalent all as specified and directed by Engr-in-Charge

S & F in repair Sink mixer with regular wall mounted Make :- Prayag Cat No- 6555 or equivalent all as specified and directed by Engr-in-Charge

S & F in repairs Basin Mixer without popup waste system with 450 mm long braided houses Make : Prayag Cat No-PIS ; 50 all as specified and as directed by Engr-in-Charge

S & F in repairs Wall mixer 3 in 1 system with provision for both hand shower complete with 115 mm long bend pipe, connection legs & wall glange (without hand & overhead shower) Make : Prayag Cat No- 6775 all as specified and as directed by Engr-in-Charge.

S & F in repairs corner self with glass of size 300 x 300mm, 8mm thick bevelled on edges with two brackets CP complete all as specified and as directed.Make-Prayag- BEA -46 or equivalent.

Repair to existing steel rolling shutters, without ball bearing, spring as specified including top cover, anchoring rod, hasp and staple; erected in position as indicated/, complete: push pull or manual type and reweilding, rops, stoppers, oiling, greasing, easying etc including necessary replacement of profile, if required grid channel complete all as specified and as directed by Engr-in-Charge

S&F in repairs 5.50mm thick looking mirror of size 600x450mm on 6mm thick Plywood backing (AC sheet backing including framing with 1st class hard wood of size 40x40mm decorative type polished.

S/F in repair waste coupling brass chromium plated for stainless steel sinks wash basins etc all as specified 32mm.

,-do- but 40mm bore.

S&F in repairs PVC flexible waste pipe 32 mm dia all as specified.

S&F in repairs PVC flexible waste pipe 40mm dia all as specified.

S&F in repairs PVC conection 15mm size with PTMT nuts of length 450mm all as specified.

S&F in repairs PVC conection 15mm size with PTMT nuts of length 600mm all as specified.

Taking down ci pipe jointed in cement mortar taking out of wall in 100 mm dia all as specified.

Taking down eaves gutters & rainwater pipes (any size or pattern), including all fittings, heads, sheos, bends, swan-necks, etc., including cleaning or refixing or removal to store all as specified. (measured overall as fixed along the center line over fittings & accessories).

S/F (SWR) PVC Pipe 110 mm pipes double socketed in any length with rubber ring joints fixed to wall/ceiling all as specified.

S/F(SWR) PVC pipe 75 mm single socketed in any length with ring joints to walls/ceiling all as specified.

S/F In repairs for removal of old PVC/cast iron loor trap incl wall crossing pipe and fixed with new outlet 75mm pvc (swr) floor trap with stainless steel grating and new wall crossing and filling with pcc 1:2:4 with water proofing compound including matchng with existed tile and joining with outer pipe line with solvent all as specified and directed by Engg in Charge.

S/F In repairs PTMT Grating 100 mm dia outlet.

S/F In repairs PTMT Grating 125 mm dia with waste hole outlet.

Supply and fix in repairs stainless steel plate racks of approved quality of Make Prayag Cat No-P-336 or equivalent all as specified.

S/F PVC (SWR) bends 110 mm bore

S/FPVC (SWR) single Y 110 mm bore

S/FPVC (SWR) double Y 110 mm bore

All as per item No 63 above but with Access door

All as per item No 63 above but 75 mm bore

S/FPVC (SWR) single Y 75 mm bore

S/FPVC (SWR) double Y 75 mm bore

All as per item No.67 above but with Access door

S/F (SWR) T Double socket equal or unequal (Junction double) 110 mm

S/F PVC(SWR) reducer

S/F PVC(SWR) Vent cover 75 mm

S&F in repairs Nipple suitable for HDPE water tank 20mm dia (Minimum weight 45gms)

,-dittto- but 25 mm (Minimum weight 65gms)

M&L for 10 mm thick rendering in cement mortar 1:6 on stone masonry or other than fair faces of brick work surfaces of wall, finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for 20 mm thick rendering in cement mortar 1:4 on stone masonry surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound including scaffolding complete all as specified and as directed. Note: WPC shall be measured and paid seperatly.

M&L for 20 mm thick rendering in cement mortar 1:4 on stone masonry surfaces of wall, finished even and smooth with out using extra cement and mixed with Water Proofing compound in shaft portion including scaffolding complete all as specified and as directed. Note: WPC shall be measured and paid seperatly.

Supply only integral water proofing compound complete all as specified and as directed.

M&L for rendering to soffit of RCC slab& ceiling , etc. 5 mm thick in cement mortar 1:3 finished even & fair without using extra cement complete all as specified and as directed.

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger complete all as per manufacturer instruction as directed.Note 165 and 166: The painting work to be executed by authorised applicator of the manufacturer

M&LPreparation of new surfaces of plastered surfaces of walls and applying three coats of white washall as specified.

M&L Preparation of new surfaces of plastered surfaces of wall and applying two coats of white wash on celling all as specified.

M&L for preparation of new surfaces of walls and applying with white putty and making the surface to an even &smooth finish,rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer to be applied by approved applicator of the manufacturer of the paint and all as specified and as approved.

Dismantling of boarding, any descreption, fixed in any position with nails all as specified and directed.

S&F 18/19mm thick Particle board, exterior grade prelaminated both sides with decorative choice lamination, fixed with nails/ screw screws to timber frame work including liping work teak wood beading 6mm thick comple all as specified and directed

S&F Continuous (Piano) hinges brass, bright finish width of flaps 40mm all as specified.

S&F brass knobs 35-40mm dia complete all as specified and directed.

S&F in repairs to brass knobs 35-40mm dia in repairs complete all as specified and directed

Taking down Chowkats or frames not exceeding 1.5 Sq.M each (Without taking off shutters from the frames). complete all as specified and directed .

Taking down Chowkats or frames exc 1.5 Sqm but not exceeding 4 Sq.M each (Without taking off shutters from the frames) complete all as specified and directed .

Taking down shutters of any description not exceeding 1 Sq. M each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sq. M but not exceeding 2 Sq.M each complete all as specified and directed.

S&F Second Class hard wood clean and sawn plain, solid, straight as in chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed .

S&F Second class hard wood plain, framed, Panelled door Shutters 30 mm thick (any number of panels), with lock rail and panels 12mm veneered particle board with commercial veneered on both faces. The size of rail and stiles as per IS 1003 (Pt-I), kiln seasoned and chemically pressure treated etc complete all as specified.

S&F Second class Hard wood glazed and skeleton door, shutters, open rebated and prepared to received glass, gauge etc (without sash bar) edges of framing plain, charnfered or rounded and mitred, beads 8.23 (a) thickness 35mm and fitted to Chokets etc. complete all as specified.

S&F Second class Hard wood glazed and skeleton door, shutters, open rebated and prepared to received glass, gauge etc (without sash bar) edges of framing plain, charnfered or rounded and mitred, beads 8.23 (b) thickness 30mm and fitted to Chokets etc. complete.

S&F Solid PVC Door Frame of size 50mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be painted to match with prelam sheet complete as specified and as directed.

S&F Factory Made Solid PVC Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm PVC Sheet on back face with wood free EPS complete as specified and as directed. Make : Sintex or equivalent in Rajashri plastwood/Poly windows/Dura plast extruction as approved by GE.

S&F 100mm size Stainless steel butt hinges, fixed with stainless steel hinge pin complete as specified and as directed.

S&F 150 mm long, PVC Bow handle complete as specified and as directed.

S&F 100mm long, PVC tower bolt complete as specified and as directed.

S & F MS work as in hold fast etc confirming (Fe-410-0 or Fe-310-0)all as specified.

M&L for PCC (1:3:6) Type C1(using 20 mm graded stone aggregates) as in hols fast, PCC Bed blocks in finished all exposed surfaces of concrete including necessary form work complete all as specified and directed.

S &F MS Butt hinges medium weight cold rolled & fixed 100mm long all as specified.

S &F in repairs MS Butt hinges medium weight cold rolled & fixed 100mm long all as specified.

S &F MS Butt hinges medium weight cold rolled & fixed 75mm long all as specified.

S &F in repairs MS Butt hinges medium weight cold rolled & fixed 75mm long all as specified.

S & F Aluminium anodized barrel tower bolts of extruded section 200mm all as specified.

S & F in repairs Aluminium anodized barrel tower bolts of extruded section 200mm all as specified.

S & F Aluminium anodized barrel tower bolts of extruded section 75mm all as specified.

S & F in repairs Aluminium anodized barrel tower bolts of extruded section 75mm all as specified.

S & F Aluminium anodized handles cast type 150mm long all as specified.

S & F in repairs Aluminium anodized handles cast type 150mm long all as specified.

S & F Aluminium alloy anodized sliding door bolt with hasp and staple of size 300mm longall as specified.

S & F in repairs to Aluminium alloy anodized sliding door bolt with hasp and staple of size 300mm long all as specified.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete as specified and as directed.

S&F in repairs to 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete as specified and as directed all as specified.

S&F 75mm Hasp and staple type, alluminium anodised including bolt to hinge plate and fxed with screws in repairs complete as specified and as directed all as specified.

S&F in repairs 125 mm Double action spring hinges, mild steel with steel wire spring,stove enamelled black all as specified.

S&F in repairs 150 mm floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring ,fixed in floor all as specified.

S&F 20 mm bore dia aluminium anolised tubular towel rail, curtain rod etcall as specified.

S&F Harrison rails mild steel, cromium plated with fixing brackets in repairs all as specified and directed be Engg in charge.

S & F in repairs Galvanized mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned stacks, or galvanized wire staples taking down existing wire cloth complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading in repairs.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including wooden beading in repairs.

M&L two coats of synthetic enamel paint over a coat of pink primer to new wooden surface including preparation of new surface.

M&L for two coats of synthetic enamel paint over a coat of red oxide, zinc chrome new or previously untreated surfaces of any description, over 10 cm in width or girth,not other wise described.

M & L for preparation of old painted surfaces of wood and wood based materials of any description not other wise described over 10 Cm width or girth and applying one coat of Synthetic Enamel paint complete all as specified and as directed Engr-in-Charge

Removal of bushes , shurbs and vegetation by top of the roof and surface of bldg all as specified and directed by Engr-in-Charge.

Dismantling of Wrought iron (or) mild steel work , including barbed wires, bolts, 10mm dia rods etc..,

S/F Joist, channel, angle ot tee sections, fixed independently, without connecting plates, etc(cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W(gde-E-250) quality-A.

M&L for Welding in repairs exc 2.5cm in length N exc 6mm all as specified and directed by Engr-in-Charge

M&L for preparation of old steel surface and applying one coat of synthetic enamel paint of any description, over 10 cm in width or girth,not other wise described.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided etc,. N.exc 15cm thickness (below or above ground level) and removing debris from site complete all as specifie and as directed.

Shree Jayam Enterprises

P K ENTERPRISES

GMS Builders

VVM CONSTRUCTIONS