WORKS CONTRACT FOR CONVERSION OF EXISTING OVER HEAD POWER LINE INTO ht ug cable at 5 location across railway line in pallipalayam division

Conversion of Ex-Over head power line into HT UG Cable Works-Railway line

Earth work excavation in hard shift clay, shift black cotton hard red earth shale's murram gravel,stony earth and mixed with small size boulders and graveely soil by using pickaxe and providing extra labour for keeping the trench side surface neat and clean for sand beeding as directed by site engineer providing labour for waching over the excavated trench during day and night to avoid any accident caused to animal and human beings including cost of signal board danger light with an initial lead of 10m and lift of 2m etc.. complete

providing side bore by trenchless methode suitable for inserting 6'' inner dia(250mm inner) cast iron pipe and erection /inserting of (5.50m standard length) cast iron pipe 8feet below railway track ground,including cost of hire charges of tools 7 plants and machineries,and including all labour charges,including earth work excavation for erection of machinery,refilling etc, Complete

Suppling and erection of GI 160mm Dia including labour charges for transporting to site VAT etc., complete (6 m length)

Transporting of HT 3X400 sqmm UG cable full drum weighing approximately 3 tons capacity in lorry from department store and transporting to work site using adeguate capacity crane for both loading at store and unloading at site etc…complete

Laying of HT UG Cable 3X400sqmm XLPE double run in the duct by using winch and steel rollers etc.. Complete

Supplying and filling the trench with M sand along the cable route as per instruction of site engineer including cost of sand labour charges etc.. Complete

Erection of V trough

Refilling the excavated earth in layer and consolidation as per the standard specification etc..Complete

Transporting of HT 3X400 UG cable empty drum from work site to Department store including loading and unloading etc..Complete

Supplying and fixing RCC slap route indicator along the route asper type design drawing no E/CN/MDU/11-94/C the thickness of slap to 7.5cm instead of 4cm inculding earth excavation concrete fixing making necessary grooves for letter pressing with painting of letter etc...Complete(RCC Cable Marker)

Erection of 33KV 3Cx400sqmm XLPE UG cable outdoor end termination Kit-Heat Shrinkable type including charges for cable jointer

Erection of 33KV 3Cx400sqmm XLPE UG cable Stright joint Kit-Heat Shrinkable type including charges for cable jointer

Loading of HT cable drum from store using crane lorry safe transporting to site and safe unloading at the worksite without any damage using crane lorry.this includes cost for loading unloading transporting and rent for crane lorry and all T&P such as crowbars siling& Dshackle,etc... and these must be brought by the Contractor

Supplying and fixing of cable clamp

ERECTION of DP Structure with AB Swithch,Top Channal,Cross bracing, earthing,painting,providing Stay including Concreting

Transport of Materials. Below 8 Kms.

INDIRA ENTERPRISES

Vidhyut Nirman Corporation

ponmani and co