PROVN OF TOILET BLOCK AT GADA RANGE OF GRC KAMPTEE.

Amount

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and 1.5m in depth for foundation and getting out in soft/ loose soil complete all as specified and directed.

M&L for hard core of broken stone of gauge not exc. 63mm, deposited, spread, levelled in layers not exc.15cm thick, watered, rolled/rammed to a true surface complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for RCC M-25 (design mix) as in footings & plinth beams (using 20mm graded stone aggregate) complete all as specified and directed.

M&L for RCC M-25 (design mix) as in columns (using 20mm graded stone aggregate) complete all as specified and directed.

M&L for RCC M-25 (design mix) as in roof beams and lintel beams (using 20mm graded stone aggregate) complete all as specified and directed.

M&L for RCC M-25 (design mix) (using 20mm graded stone aggregate) as in chajjas complete all as specified and directed.

M&L for mild steel TMT bar of 10mm dia and over, cut to length, bent to shape as required and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for mild steel TMT bar 8mm dia as in stirrups and distribution bar, cut to length, bent to shape as required and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for formwork to sides and soffits of plinth beam, sides of footings, base of columns and similar work with rough finished surfaces etc complete all as specified and directed.

M&L for formwork to sides of columns and similar work with rough finished surfaces etc complete all as specified and directed.

M&L for formwork to sides and soffits of beam, lintel, rough finished surfaces etc complete all as specified and directed.

M&L for formwork to chajjas including edges, flat, rough finished surfaces of concrete complete all as specified and directed.

Formwork to edges of concrete flats and similar works exc. 10cm & not exc. 20cm wide with rough finished surfaces etc complete all as specified and directed.

M&L for brickwork with fly ash brick, old size, curved on plan exc 6 metre mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with fly ash brick, straight or curved on plan to any redius built in half brick thick wall built in CM 1:4 (Using old size brick) complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick wall, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja mixed with water proofing compound @ 3 % by the weight of cement or as per manufacturer's instructions, surface finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls & applying three coats of white wash complete all as specified and directed.

M&L for two coats of cement base paint, white or tinted on walls etc complete all as specified and directed.

M&L for 150mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in base and similar works complete all as specified and directed.

M&L for damp proof course to horizontal or vertical surfaces including necssary form work in CM 1:2, 20mm thick using water proofing compound @3% by weight of cement complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2, (using 20mm graded stone aggregate) as in plinth protection, finished even and smooth without using extra cement complete all as specified and directed.

M&L for forming 12mm thick expansion joint with pre-formed filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 50mm thick concrete slab complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layer not exc. 25cm in soft/ loose soil complete all as specified and directed.

Removing surplus excavated materials not exc. 50m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

S&F pre-painted galvalume GI based aluminum zinc coating AZ-150 corrugated steel sheet, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume GI based aluminum zinc coating AZ-150 plain steel sheet, 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F mild steel screw bolt (machine made) with square or hexagonal head at one end, screwed the other, fitted with washer and one hexagonal or square nut not exc 5cm long and 10mm dia complete all as specified and directed.

S&F mild steel bolts exc 20mm & not exc 25mm dia, purpose made with hexagonal or square head at one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe- 290 (Gde E-165) complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F rolled mild steel section in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging of grade Fe 410-S complete all as specified and directed.

S&F solid PVC frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with MS square tube and fixing in opening as per drawing complete all as specified and directed.

S&F PVC factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with wood free EPS 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face and fixing in frame at site as per specification & drawing complete all as specified and directed.

S&F 100mm long butt hinges, aluminium anodised and fixed complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolt and 12mm dia and fixed complete all as specified and directed.

S&F 200mm long aluminium handles, cast type, anodised complete all as specified and directed.

S&F steel ventilator, factory made with top hung shutter including hinges, steel peg stay with glazing bars complete all as specified and directed.

S&F framed work such as grills, etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars and similar work conforming to Fe- 290-0 Gde-E-165 complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F 15mm bore galvanized steel tubes, medium grade with all fittings for water supply pipes, fixed to walls and ceilings or laid in floors complete all as specified and directed.

All as per item No 46 above but 20mm bore complete all as specified and directed.

S&F tubes 25mm bore medium grade galvansied with all fittings, fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supply, hoist and fix in position rotational molded polyethylene water storage tanks (cylindrical with closed top) of capacity 500 ltrs complete all as specified and directed.

S&F in repair 20mm PTMT float valve, high pressure with polythene float and flynut complete, screwed for iron pipe etc complete all as specified and directed.

S&F in repair gun metal gate valve of 20mm dia with iron wheel head, screwed both for iron pipe complete all as specified and directed.

S&F in repair vitreous china squating pan WC "Orissa pattern", white, of size 580 x 440mm with integral foot rests with ‘P’ or ‘S’ trap including provn of lime or concrete bedding complete all as specified and directed.

S&F vitreous china half stall urinal with grating, union and spreader complete set with 40mm dia GI light grade, waste pipe including brackets etc complete all as specified and directed.

S&F vitreous china W.H.B., white, flat back with pedestal of size 550 x 400mm, including CP waste coupling of 32mm, waste pipe and brackets etc complete all as specified and directed.

S&F in repair PVC low level flushing cistern, white, slimline, 10 ltrs capacity including PVC bend pipe, handle and float valve, brackets etc complete all as specified and directed.

S&F in repair 15mm bore bib tap, fancy type, chromium plated, long body, cast copper alloy, screwed down for iron pipes or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore angle stop valve, fancy type, chromium plated, cast copper alloy, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm bore concealed stop valves, fancy type, chromium plated, cast copper alloy, high pressure with crutch or butter fly handles, screwed both ends with long shank and cup (concealed type) for iron pipe or for union complete all as specified and directed.

S&F in repair 15mm bore pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed.

S&F in repair chromium plated shower rose, fancy type, fixed to 15mm bore pipe complete all as specified and directed.

S&F low density polyethylene pipe connection with PTMT nuts suitable for 15mm bore GI pipe, 450mm long complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F 100mm dia cast iron floor trap with grating including jointing to waste pipe fixed in PCC 1:2:4 type B-I, etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends, ISI marked, any radius complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl, ISI marked complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.

M&L for coloured non skid ceramic jointless tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but not exc. 0.18 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.

M&L for 10mm thick rendering with CM 1:4 on fair faces of brick work or concrete surfaces, finishing rough for receiving wall tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles, 450x300x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for RCC M-25 (design mix) (using 20mm graded stone aggregate) as in roof slabs supported on walls etc complete all as specified and directed.

M&L for form work to soffits of suspended slabs, such as roof slabs and similar work; not exc 200mm thick for flat rough finished surfaces complete all as specified and directed.

M&L for SGSW drain pipes laid in trenches of 150mm internal dia of pipe and jointed complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150mm bore of pipe with cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for septic tank, excavation in any type of soil, foundation in PCC, brick work in CM 1:4, RCC/ CI manhole covers (HD), vent, shaft & sludge chamber etc complete for 100 users as per TD drawing complete all as specified and directed.

M&L for soakage well, excavation in any type of soil, foundation in PCC 1:3:6, walls of honey comb & solid brick masonry in CM 1:3, RCC cover slab filling with brick bat, size 2.40m dia x 3m depth as per TD drawing complete all as specified and directed.

M/s Rahul Traders

Shri Mohan Brother

M/s M.G. Hargunani

SHUB CONSTRUTION

M/s Jagdish Staioners and General Stores

M/s B S Jain

Bidder Name

SHUB CONSTRUTION

M/s B S Jain

M/s Rahul Traders

Shri Mohan Brother

M/s DS Khekde

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani