Providing and fixing rolling shutters at Central workshop in factory area and Kurul Township of Rashtriya Chemicals and Fertilizers Limited at Thal, Dist. Raigad, Maharashtra.

Providing and fixing rolling shutters at Central workshop in factory area and Kurul Township

Providing and fixing Gear operated rolling shutter, having following specifications, 1) Laths/shutter strips of 0.9mm thick (min.) GI Sheet of SAIL/ JSW / TATA or equivalent. 2) Guide channels of MS 100 mm x 3mm thick (min.) 3) Heavy duty High Tension Spring made from high tensile spring steel wire as per shutter size. 4) Heavy duty Gear Set Assembly (machine cut gear of high grade cast iron or mild steel) with pulling handle. 5) Shaft: MS pipe 48mm OD heavy duty. 6) Bottom plate/Lock plate: min. 3 mm thick reinforced with ms angle of min. size 35x35x5mm fitted with sliding bolts and handles on both sides. 7) Brackets: ms plate 400x400mm, min. 6mm thk 8) Shaft Pinjara : Ms Flat 30 mm X 6 mm 9) Top Cover 0.9 mm GI 10) Paint: One coat red oxide primer and one coat of synthetic enamel for MS. material Note: Incase of lesser thickness of sections, reduction in rate on pro-rata basis of weight shall be made. Rate is inclusive of scaffolding required for the work.

Providing and fixing Motor operated rolling shutter, having following specifications, 1) Laths/shutter strips of 0.9mm thick (min.) GI Sheet of SAIL/ JSW / TATA or equivalent. 2) Guide channels of MS 100 mm x 3mm thick (min.) 3) Motor: Single Phase, 230V Shutter Motor 1000 kg capacity with inbuild chain pulley for manual operation in case of power supply failure and min. one year warantee against manufacturing defects. 4) Shaft: MS pipe 150mm OD heavy duty. 5) Bottom plate/Lock plate: min. 3 mm thick reinforced with ms angle of min. size 35x35x5mm fitted with sliding bolts and handles on both sides. 6) Brackets: ms plate 500x500x6mm 7) Top Cover 0.9 mm GI 8) Paint: One coat red oxide primer and one coat of synthetic enamel for MS. material Note: Incase of lesser thickness of sections, reduction in rate on pro-rata basis of weight shall be made. Rate is inclusive of scaffolding required for the work.

Dismantling of existing old rolling shutter carefully and deposition of scrap to the factory scrap yard or as directed by E.I.C.

SERVO GEAR HP140 IOC(2503)/HP GEAR OIL EP-140/MAK SPIROL 140 EP

SERVO MESH SP 320/PARTHAN EP 320/AMCON320

SERVO SYSTEM-320 / HP ENKLO 320 / /HYDROL 320

SERVO CUT 'S' IOC(4501) / HP KOOLKUT-40 / MAK CHEROL B

SERVO GEM 2 IOC(7722)/ HP LITHON-2 / MAK MP GREASE 2

SERVO GEM-3 / HP LITHON 3 / MAK MP GREASE 3

SERVO GREASE MP/HP MULTY GREASE/MAK MP GREASE

ENGINE OIL SAE 15W40 CH4 FOR BEML DOZER

SERVO MESH-SP-460 / HP PARTHAN EP 460 / MAK AMOCAM 460

SERVO SYSTEM -68 /HP ENKLO 68 / HYDROL 68

SERVO SYSTEM 46 IOC(3002)/ HP ENKLO-46 / HYDROL 46

SERVO ULTRA-40(NC)/ HYLUBE X-3 40 /MAK CD 40

SERVO PRESS 100

SERVO SYSTEM-150 / HP ENKLO 150 / HYDROL 150

SERVO SYSTEM HLP-68 (IOC CODE-3084)

SERVO FRIZ-68 IOC(3908) / HP SEETUL 68 /MAK FREEZOL 68

SERVO PRIME -32 (3120) / HP TURBINOL 32 / MAK TURBOL 32

SERVO PRIME-46 / HP TURBINOL 46 / MAK TURBOL 46

OILS FOR HEAVY WATER PLANT ( DAE)

SERVO ULTRA-40(NC)/ HYLUBE X-3 40 /MAK CD 40

SERVO PRIDE-40 /HYLUBE MILCY 40 /MAK T 40

SERVO MESH SP-220 / HP PARTHAN EP 220 /AMOCAM 220

SERVO SYSTEM 46 IOC(3002)/ HP ENKLO-46 / HYDROL 46

SERVO SYSTEM -68 /HP ENKLO 68 / HYDROL 68

SERVO SYSTEM-220 / HP ENKLO 220 / /HYDROL 220

SERVO SYSTEM-320 / HP ENKLO 320 / /HYDROL 320

SERVO FRIZ F-57 / HP SEETUL N 68 / MAK FREEZOL 68

SERVO SPIN 12 IOC(3402)/ HP SPINTEK-12 / MAK HYDROL 12

SERVO PRIME-46 / HP TURBINOL 46 / MAK TURBOL 46

SERVO TORQUE-10

SERVO COAT 140 CARDIUM COMPOUND (FOR CRANE ROPE LUBRICATION)/HP HYTAK 2

SERVO GEM 2 IOC(7722)/ HP LITHON-2 / MAK MP GREASE 2

SERVO GEM 3 IOC(7722)/ HP LITHON-3 / MAK MP GREASE 3

VIRAJ STEEL FABRICATORS