Annual Repair of Revenue Colony 8 Nos Quarters Tehsildar Residence 2 No 1882 Sft Residence in officers Colony at Kaithal in Kaithal Distt for the Year 2020 21

Amount

Scraping white wash and colour wash (HSR 8.32 (a))

Tile terracing with one layer of tiles, 22.86 cm X 11.43 cm X 3.81 cm laid dry over a layer of mud mortar including grouting with cement sand mortar 1: 3 and top surface to be left clean (HSR 13.14)

Conglomerate floor 40 mm thick cement concrete topping 1:1½:3 (HSR 14.9 + 14.3)

Conglomerate floor 50 mm thick cement concrete topping 1:1½:3 (HSR 14.10 + 14.3)

Terrazzo topping rubbed and polished to a granolithic finish under layer 34 mm thick cement concrete 1:2:4 and top layer as specified below: - (a) With grey Cement (i) 40 mm hick with top layer 6 mm thick with white marble Makrana/ Narnaul chipping of size 1 mm to 4 mm laid in cement marble powder mix in the ratio of 3:1 (3 parts of cement and one part of marble powder) by weight in proportion of 4:7 (4 parts of cement marble powder mix: 7 parts of white marble chips) by volume complete.(HSR 14.25(a) (i))

Terrazzo Skirting or dado or on wall face rubbed and polished to a granolithic finish under layer 12 mm thick cement coarse sand plaster 1:3 and top layer as specified below. (a) with grey cement (i) 18 mm thick with top layer 6 mm thick with white marble Makrana / Narnaul chipping of size 1 mm to 4 mm laid in cement marble powder mix in the ratio of 3:1 (3 parts of cement and one part of marble powder) by weight in proportion of 4:7 (4 parts of cement marble powder mix : 7 parts of white marble chips) by volume complete. (HSR 14.26(a)(i)

Glazed tiles White glazed tiles 15 cm x 15 cm, 5 mm thick in skirting and dado on 12 mm thick cement coarse sand plaster 1:3 in base and jointed with white cement slurry in oints, including bevelled corners (HSR 14.48 (a)(i))

Kotah stone flooring, minimum 25 mm thick, in any pattern as specified over 20 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing. (HSR 14.62)

Providing and fixing vitrified tiles of size 600 x 600mm of approved make in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:-Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT & JOHNSONS, RAK & SIMPOLO.(HSR 14.89)

12 mm thick cement plaster 1:4 (HSR 15.5)

12 mm thick cement plaster 1:5 (HSR 15.6)

12 mm thick cement plaster 1:6 (HSR 15.7)

15 mm thick cement plaster 1:6 on the rough side of single or half brick wall (HSR 15.12)

10 mm thick cement plaster 1:4 (HSR 15.52)

Providing two coats of exterior acrylic emulsion paint. a) 2nd Quality (NS)

Painting two coats with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint (HSR 16.5)

Painting one coat with synthetic enamelpaint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (HSR 16.7)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces (HSR 16.25)

Painting two coats with plastic emulsion paint on walls on new work to give an even shade. (HSR 16.30)

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on newwork. (HSR 16.58)

Distempering with washable oil bound distemper (of approved manufacture) one coat on old distempered work (HSR 16.59)

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (HSR 16.60)

Finishing walls with exterior decorative cement based paints such as snowcem, Robbiacem etc. on new work, two coats to give an even shade. (HSR 16.61)

Supplying and fixing glass panes including special metal sash putty of approved make (b) glass panes 4 mm thick, exceeding 40 sq dm areas (HSR 18.30 (b)) Note:- In case of any difference in the unit & nomenclature of any of the HSR Items of Civil, P.H. work depicted in this DNIT and that given in HSR, the unit and nomenclature given in HSR shall be applicable.

THE PREMI CO-OPERATIVE LABOUR & CONSTRUCTION SOCIETY LIMITED