CERTAIN REPAIR TO ROOFING, CEILING, JOINERY, FLOORING, PLASTERING, INTERNAL WATER SUPPLY, SANITARY AND PLUMBING ETC AT BHALUKMARA AREA UNDER GE JORHAT

Amount

NOTES :(i)The bidders/contractors are advised to read tender document & all corrigendum/ amendments and General conditions of contracts before entry/quoting the rates.

Dismantling of AC sheet roofing (corrugated or semi corrugated) complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl nanital or similar pattern roof covering complete all as specified and directed.

Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

Supply and fixing of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick and pitch length 75 mm c/c of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fixing of Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, eaves etc fixed with self tapping screws as complete all as specified and directed.

Supply and fixing of 0.63mm galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers or with cranked hook holts , in roofs, walls etc. with grade of zinc coating 275 complete all as directed.

Dismantling timber scantling 40 Sqcm and over in section in any position unframed work.

Material and labour for 2nd class hardwood timber clean sawn fixed as in scantlings, purlins, trusses complete all as specified and directed.

Material and labour for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality- A incl welding, nuts and bolts complete all as specified and directed.

Material, labour and fixed of powder coated aluminium snap grid frame work for false ceiling, size of grid 605 x 605 mm, including aluminium main/closs tee of size 35mm x 23mm x 1.5 mm ( minimum) aluminum BULBED TEES section and aluminium angle of 25mm X25mm X1.5mm thick, sutiable type 2-3 mm dia GI wire hanging arrangement with adjuster all as specified in clause no 10.38 in SSR part-I and including 4 mm thick high pressure steam cured non asbestos fibre cement designer board as per IS 14862 with applying of two coats of acrylic distemper over a coat of primer including taking dwon existing false ceiling system complete all as specified and directed. Make (i) ALUMINUM SNAP GRID:- HINDALCO/ INDALCO/ JINDAL (ii) Non Asbestos Fibre Cement Board as per IS 14862:-ARMSTRONG/ SAINT GOBAIN (GYPROC)/EVEREST / VISAKA Industries Ltd

Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc., ncl removing rubbing to a distance exceeding 100m complete all as specified and as directed.

Material & Labour for 15mm thick rendering in Cement Mortar 1:4 on brick work or concrete surfaces, finished even and smooth without using any extra cement complete all as specified and as directed.

Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using any extra cement complete all as specified and as directed.

Material & Labour for preparation of new plastered or un-plastered surfaces and walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed.

Material and labour for Preparation of new plaster surface and applying two coats of acrylic washable distemper over a coat of primer over a coat of 3.00 mm thick cement base wall putty complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and directed.

Taking down and refixing shutters of any description exc 1 sq. m each n exc 2 sqm each in the same opening complete all as specified and directed.

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any description n exc 1 sq. m each complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed.

Taking down chowkhat with shutter not exc 1.5 sqm each (without taking off shutters from the frames) complete all as specified and directed

Dismantling old particle boards/plywood as in shelves boarding, any description, fixed in any position with nails complete all as specified and directed.

Supply and fixing of 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

Supply and fixing of pressed steel door frames (fabricated out of CRLCS sheet 1.6 mm thickness) 125 x 60 mm size with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. complete all as specified and as directed.

Supply and fixing of pressed steel door frames (fabricated out of CRLCS sheet 1.6 mm thickness) 105 x 60 mm size with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. complete all as specified and as directed.

Material and labour for 30 mm thick, second class hard wood, factory made glazed and skeleton shutters, open rebated and prepared to receive gauze, etc. with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

Material and labour for 35 mm thick, second class hard wood, factory made glazed and skeleton shutters, open rebated and prepared to receive gauze, etc. with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

Supply and fixing of plain framed, factory made panelled shutter 35 mm thick (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fixing of Solid PVC Double door frame of size 50mm x 95mm made out of 5mm wood grain printed colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

Supply and fixing of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

Supply and fixing of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded wood grain printed colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Supply and fixing of 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both side complete all as specified and directed

Supply and fixing of factory made solid PVC moulded door designer shutter 35 mm thick comprising of 30 mm thick solid particle board core in centre core, with 2,4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on both face complete all as specified and as directed.

Supply and fixing of Factory made solid panel wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. The panel will be of wire gauze. The wire gauze shall be wrapped on an additional square 8 mm MS solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed by Engr-in-Charge.

Supply and fixing of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as specified and directed by Engr-in-Charge

Supply and fixing of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of framemade out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading , and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Material and labour for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing on vertical PVC fillet frame all as per specified on page no 162 of SSR Part-II complete all as specified and directed.

Material and labour for 5mm thick PVC sheet fillet frame of width 35mm for wall paneling and fixing on to wall to make PVC Frame all as per specified on page no 162 of SSR Part-II complete all as specified and directed.

Supply and fixing of 12 mm thick coloured solid PVC sheet suitablely fixed as per direction and specifications

Supply and fixing of 1.00 mm thick Mild steel, plain/black sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Supply and fixing of rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening, fixing including welding complete confirming to Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.

Materials and labour for steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with gauzed/glazing bars, dovetailed or welded complete all as specified and directed

Materials and labour for steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed

Materials and labour in repairs harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and directed.

Materials and labour for Mild Steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290(Gde E-165) including taking dwon old one complete all as specified and as directed.

Supply and fixing of anodised powder coated aluminium sections of various sizes as in frame and shutters of doors, windows, ventilators with one or more rebates including joining cleats, handles, glazing clips, packing, anodized aluminium snap beading screws etc complete all as specified and directed by Engr-in-Charge.

Material and labour for power coated anodised aluminium door shutters made of aluminium section as per TD drawing(not less than 2.00mm thick) including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, floor hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed.

Material and labour for power coated anodised aluminium window shutters made of aluminium section as per TD drawing(not less than 1.50mm thick) including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, floor hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. Note Nos :- (i) All window member including fitting & fixture i.e shutter frame, etc shall be deem to included quoted rate. (ii) Only Glass for window & wire mesh shall be measure and paid separately under relevant items of BOQ .

Supply and fixing of aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum thickness of powder coating 50 micron) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge.

Supply and fixing in repairs 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete.

Supply and fixing of sheet glass ordinary 3 mm thick not exc 0.50 Sqm in each panes and glazing with oil putty etc complete all as specified and directed..

Supply and fixing of figured glass, pin head type 3 mm thick not exc 0.50 Sqm in each panes and glazing with oil putty etc complete all as specified and directed..

Supply and fixing of in repairs sheet glass ordinary 3 mm thick not exc 0.50 Sqm in each panes and glazing with oil putty, wooden beads, etc complete all as specified and directed..

Supply and fixing in repairs Stainless Steel drapery road (1 mm thick stainless steel section outer dia 25 mm with bracket, ring & fancy side holders complete all as directed by Engr-in-Charge

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing in repairs floor door stopper of aluminium alloy body and tongue, length of leg 140 mm, anodised, with hard drawn steel spring and fubber foot complete all as specified and directed.

Supply and fixing in repairs door closer cast iron body, hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 70 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

Supply and fixing of stainless steel pressed handles, oval type, designer of 150 mm size for doors complete all as specified and directed.

Supply and fixing of extruded aluminium alloy handles 150 mm, fabricated type, anodized complete all as specified and directed.

Supply and fixing of extruded aluminium alloybarrel tower bolts, st, with bright bolt and fixed of size 200 mm for doors complete all as specified and directed.

Supply and fixing of aluminium anodised, barrel tower bolts of extruded section and fixed of 150 mm size complete all as specified and directed.

Supply and fixing of butt hinges of size 100 mm, medium weight, stainless steel min 3 mm thick for doors complete all as specified and directed.

All as per item No-66 above but of size 75 mm L-type complete all as specified and directed

Supply and fixing of aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of 300 mm size complete all as specified and directed.

Supply and fixing of designer stainless steel drawer handles, projection drop (50mm to 65mm) on screwed plate complete all as specified and directed.

Supply and fixing of Hasp and staple safety type stainless steel with steel hinge pin including bolt to hinge plate of 100mm size and fixed with screws complete all as specified and directed.

Supply and fixing of aluminium anodised, barrel tower bolts of extruded section and fixed of 125 mm size.

Supply and fixing of Aluminium handles cast type anodised 125 mm size

Supply and fixing of mild steel for hold fasts complete all as specified and directed. Note : The hold fasts shall be treated in two coats of tar and the cost for the same shall be included in the quoted rate.

Material and labour for two coats of synthetic enamel painting over a coat of pink primer on new wood and wood based materials including necessary preparation of surfaces ocer 10 cm width or girth all as specified.

Material and labour for two coat of synthetic enamel painting on new steel surfaces including preparation of surface and one coat of red oxide zinc chrom primer, on surfaces of any description, over 10cm in width or girth,not otherwise described complete all as specified and directed.

Material and labour for 2 coats of synthetic enamel painting over a coat of red oxide primer including preperation of steeL surface of any description nexc 10 cm width or girth complete all as specified and directed.

Demolition of brick masonary built in cement mortar all as specified.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) complete all as specified and directed.

Material and labour for PCC (1:2:4) type B1 using 20 mm graded aggregate as in bed block/hold fast blocks,benching and coping etc with & including necessary form work for fair faces of concrete, complete all as specified and directed.

Disconnecting existing tanks of 500 litre capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately).

Supplying, hoisted and fixed in position of rotational moulded polyethylene water storage tanks in double layers and cylindrical vertical type with manhole lids(closed top) of 500 litres capacity with ISI marked and all as specified in IS 12701 and including taking down existing water tank and provide new 20 mm bore PVC ball valve high presure with polythene float and fly nut epoxy coated aluminium rod, tank nipple complete all as specified and directed .

Supplying, hoisted and fixed in position of rotational moulded polyethylene water storage tanks in double layers and cylindrical vertical type with manhole lids(closed top) of 1000 litres capacity with ISI marked and all as specified in IS 12701 and including taking down existing water tank and provide new 20 mm bore PVC ball valve high presure with polythene float and fly nut epoxy coated aluminium rod, tank nipple complete all as specified and directed .

Supply and fixing of 15mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors and including taking up old GI pipe complete all as specified and as directed.

Taking down old GI tubes of 15 mm bore and re-fixing same location after cleaning of old GI tubes and fixed with new fitting , fixture and clamp i wall surface etc. All as specified and as directed

Supply and fixing of 20mm bore galvanised steel tubes, medium grade with all fitting and fixed to walls, ceiling, floors and including taking up old GI pipe complete all as specified and as directed.

Taking down old GI tubes of 20 mm bore and re-fixing same location after cleaning of old GI tubes and fixed with new fitting , fixture and clamp i wall surface etc. All as specified and as directed Note for item no 84 to 87 :- All fitting & fixture such as Bends, Elbows, Tees, Short Pieces, Connectors, Back - Nuts Caps, Plugs, Unions, Flange (core) & flange (ring), reduction Tee, reducing socket, Male & female threaded socket, tank connector, holding clamp shall be provide as per site requiredment as as directed by Engg-in_charge and same shall deem to be included in quoted rate.

Supply and fixing of uPVC of type-B(SWR) for use in soil and waste discharge systems, single socket, 110 mm bore in any length including rubber ring joints and fixed to walls with clips and other standard material and including taking dwon old rain water pipe & removal from site all as specified in IS 13592 complete all as specified and directed.

Supply and fixing of uPVC of type-B(SWR) for use in soil and waste discharge systems, single socket, 75 mm bore in any length including rubber ring joints and fixed to walls with clips and other standard material and including taking dwon old rain water pipe & removal from site all as specified in IS 13592 complete all as specified and directed.

Supply and fixing of 110mm dia uPVC (SWR) bends any radius complete all as specified and directed.

Supply and fixing of 75 mm dia uPVC (SWR) bends any radius complete all as specified and directed.

Supply and fixing of 110 mm uPVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply and fixing of 75 mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Material and labour for uPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Supply and fixing of in repair uPVC (SWR) floor trap 75 mm, plain with CP grating including joining and solvent cement complete all as specified and directed.

Supply and fixing in repairs tubular towel rail brass chromium plated , 20mm dia, 60cm long between flanges in repairs complete all as specified and as directed.

Supply and fixing in repairs 15 mm dia brass CP fancy wall mixer 3-in-1 system with L Bend including hand shower with fiexble shower tube1.5m long for mixing hot & cold water screwed down for iron pipe and fixed as in repairs complete with hand shower rose and tube. Make :- Cat no For wall mixter Cat No. 7680 & for Hand shower BH-73 of Paryag or equivalent model of make list as given in PS as approved by GE.

Supply and fixing in repairs 15 mm dia brass CP centre hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed as in repairs. Make Cat No Cat No. 7650 of Paryag or equivalent model of make list as given in PS

Supply and fixing in repairs 15 mm bore gun metal gate valve cast copper alloy, screwed down high pressure with wheel head, screwed both ends with crutch or butterfly handle for iron pipes complete all as specified and directed.

Supply and fixing in repairs 20 mm dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and directed

Supply and fixing in repairs Vitreous China Wash hand basin, white, oval shape, size 580 mm x 450 mm size, excluding taps, chain & plug & porcelain stopper but incl brackets, 40/32 mm dia PVC waste pipe, PVC connection, chromium plate coupling 32 mm dia, approved pedestal & cutting for and pinning ends of brackets or erecting stand Complete all as specified and directed.

Supply and fixing in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including P or S trap (excluding flushing cistern and flush pipe) complete all as specified and directed.

Supply and fixing in repairs pedestal pans couple closet with sheet cover, 'S' or 'P' trap including flush pipe complete all as specified.

Supply and fixing in repairs Vitreous China half stall urinals, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, magnum urinal spreader, pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe

Supply and fixing of 50 mm dia low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm fixed complete to walls, ceiling or in floors etc including cutting, chasing, pinning and making floor good with existing one all as directed

Supply and fixing in repairs PVC valve less syphonic action type flushing cistern low level white, dual flush, ISI marked (IS: 7231) with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor including taking down existing complete all as specified & directed.

Supply and fixing in repairs Soap dish complete all as specified and directed. Make Cat No BA -05 of Prayag or equivalent model of make list as given in PS

Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, coupling, strainer, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm(minimum size) bowl size 410mm x 330mm x 160mm (minimum size) complete all as specified and directed. Make Cat No 1240 DM of Prayag or equivalent model of make list as given in PS

Supply and fixing in repairs sinks made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm (minimum Size) bowl size 410mm x 330 x 160mm (minimum Size) complete all as specified and directed. Make Cat No1218D of Prayag or equivalent model of make list as given in PS

Supply and fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs complete all as specified and directed. Make Cat No BEA -47 of Prayag or equivalent model of make list as given in PS

Supply and fixing of in repair Kitchen stainless steel plate rack (24" x24" x10") including necessary fixing / fittings & making good the existing surfaces complete all as specified and directed. Make Cat No P-310 of Prayag or equivalent model of make list as given in PS

Supply and fixing in repairs corner glass shelf tripple story including bracket and railing complete all as specified and directed. Make Cat No BEA -48 of Prayag or equivalent model of make list as given in PS

Supply and fixing in repairs toilet paper holder, brass chromium plated complete all as specified and directed. Make Cat No BA -18 of Prayag or equivalent model of make list as given in PS

Supply and fixing of in repair 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe complete all as specified and directed. Make Cat No PIS 08 of Prayag or equivalent model of make list as given in PS

Supply and fixing of pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as in repair complete all as specified and directed. Make Cat No PIS 02 of Prayag or equivalent model of make list as given in PS

Supply and fixing in repairs fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. Make Cat No PIS 18 of Prayag equivalent model of make list as given in PS

Supply and fixing of in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union alongwith arm 225mm and flange.

Supply and fixing in repair of two way angle cock cast copper alloy screwed down with long body with wall flange, and fixed for 15 mm bore GI tube pipe and all accessories complete all as specified and as directed. complete all as specified. Make :- Cat no PIS -10 of Prayag or equivalent model of make list as given in PS as approved by GE.

Supply and fixing as in repair of health faucet of ABS body with wall hook and including one metre long stainless steel braided rubber hose pipe fixed on 15 nn dia angle cock all complete complete all as specified and directed Make:- Cat No. BEA-41 Prayag equivalent model of make list as given in Approved Make list .

Supply and fixing of in repair Bib tap standard of PTMT any colour high pressure screwed for 15 mm bore dia iron pipe and fixed .(Minimum weight 15mm-90gms)

Supply and fixing PVC waste pipes of 32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fixing steel CP grating 100/125 mm dia incl waste hole where required at site complete all as directed by Engineer-in-Charge.

Cutting Chases for concealed water tubing etc in brick/concrete walls and making good to facing where required and pointing in CM 1:3 cutting not exceeding 10 cm girth complete all as specified & directed.

Removal of existing detoriated decayed tarfelt or any other treatment including PCC padding, loose surface & removing the debris to a distance n.exc 50m depositing where directed complete all as specified.

Material and labour for for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified and directed.

Material and labour for 15mm thick rendering in CM 1:4 on brick / concrete surface finished even and fair with WPC by 3% of weight of cement used on walls, roof, parapet, chhajja etc. complete all as specified and directed. (WPC shall be measured and paid separately) complete all as specified and directed.

Supply only integral water proofing compound all as specified and directed.

Supplying and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt laying over a coat of bituminous primer @ 0.40 Ltr / Sqm and two coats of Bitumen based UV reflective paint with aluminium finish over APP membrane. The membrane shall be laid using butane torch and sealing all joints etc all as specified in Para 11.44.5 of SSR Part I complete all as specified and as directed..

Demolition of cement concrete (unreinforced below or above ground level) n.exc 15cm thick and removing rubbish to a distance n.exc 50m at low lying area complete all as specified and directed

Demolition of cement concrete of any description and in any position such as sunken floor etc removing rubbish to a distance n.exc 100m at low lying area complete all as specified and directed

Material and labour for cement concrete M-7.5(Nominal Mixed) using 40mm graded stone aggregate as in filling under sunken floors etc all as directed

Material and labour for cement concrete M-10(Nominal Mixed) using 40mm graded stone aggregate as in sub base filling under floors etc all as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L 50 mm thick cement concrete type B1, 1:4:8 (using 40 mm graded stone aggregate) finishing cement concrete surfaces rough complete all as specified and directed

M & L 40 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) finishing cement concrete surfaces even and rough complete all as specified and directed

Supply and fixing of Granite slab of 18-20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM 1:4/solvent or as directed with grinding, moulding and polishing complete.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick (square rectangular ) area of each tile exc 0.06 sqm but nexc 0.11 sqm, laid over & including 15 mm thick screed bed or bedding layers of mortor in cm (1:6) for laying floor finishes all as specified in floors etc set and jointed in neat cement slurry and pointed in white cement to match the shade of tiles

Material and labour for non skid ceramic coloured joint free tiles, 7 to 8 mm thick (square / rectangular ) area of each tiles exceeding 0.11 sqm but n exc. 0.18 sqm , in floor etc. set and jointed in neat cement slurry and pointed in colour cement to match shade of tiles and laid over & incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item no 139 but as in skirting/dado but over 10 mm thick rendering over CM 1:4

Material and labour for Coloured Non skid ceramic tiles 7 to 8 mm thick area of each tile exeeding 0.18 sqm but not exe 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.over and including screed bed or bedding layer of mortar 15mm thick in CM (1:6) complete all as specified and directed by Engr-in-Charge

All as per item no 142 but as in skirting/dado but over 10 mm thick rendering over CM 1:4

Material and labour for coloured, glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick rendering in CM 1:4 complete all as specified and directed by Engineer-in-Charge

Material and labour for Virified Ceramic tiles designer and digital 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors laid over & incl 15 mm thick screed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete as directed by Engineer-in-Charge

All as per Item no 145 but as in skirting/dado but over 10 mm thick rendering over CM 1:4

Material and labour for 75mm thick cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in floors, plinth protection (finished even and fair) laid in panels including joints filled with sealing compound grade 'A' complete all as directed by Engr-in-Charge

Material and labour for 25mm thick PCC(1:2:4) Type B-0 using 12.5mm graded stone aggregate as in sub base.

Demolition of cement concrete reinforced ( reinforcement cut as required to faciliate demolition)Roofs, floors (other than ground floors), beams, staircases, landing, chajjas, facia, fins railing, parapet etc and similar suspended work

Material and labour for reinforced cement concrete M-20( nominal mix )using 20 mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves including necessary form workand the like complete all as specified and as directed.

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed) not less than 0.9mm dia or securing with clips

Material and labour for 12 mm thick wood grain printed colour PVC prelaminated board for cupboard partition & shelf complete all as specified and as directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ₹ ___________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

A M CHOUDHURY AND CO