DesignDetailed EnggManufacture Supply, ETC of 230/110KVDigital AIS SS with ICTs, Switchgears,CP,SAS, Control Room,Civil Works in the premises of existing Poolavady 110KV SS in CBE Region on Total Turnkey basis PkgIV of MNRE,KfW funding GECII Project.

Amount

Schedule I - CIVIL

Schedule II - SUPPLY

Schedule III - ERECTION

GST on 18%

Description of Work / Item(s)

Amount

Clearing Light jungle inculding cost of labour,lead, lift,etc,complete

Uprooting & Removing large Trees, inculding cost of labour,lead, lift,etc,complete

Filling in low lying area for levelling the surface including cost of cutting the gravelly soil /soft disintegrated rock with JCB / other machineris , consolidation as per specification & with power roller including all labour lead and lift etc complete.

Cutting and Filling in low lying area for levelling the surface including cost of cutting the gravelly soil /soft disintegrated rock with JCB / other machineris , consolidation as per specification & with power roller including all labour lead and lift etc complete.

Earth work excavation for foundation in all soils initial lead of 10m and lift of 2 m including all labour charges initial lead, lift, etc. complete.

Earth work excavation for foundation in SDR initial lead of 10m and lift of 2 m including all labour charges initial lead, lift, etc. complete.

Earth work excavation for foundation inMR & DMR NOT Requiring BLASTING initial lead of 10m and lift of 2 m including all labour charges initial lead, lift, etc. complete.

Earth work excavating and depositing on Bank with initial lead of 10m and initial lift of 2m in Hard Rock by wedging cheselling , as per standard specification, etc., complete..

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the building using BIFLEX-C termite 250ml for 10lit of water etc. complete.

Refilling with excavaed earth other than Sand in foundation and basement ,etc Consolidation as per standard specification with water including all labour, lead, lift, etc, complete

Supplying and filling river sand for foundation and basement including watering and consolidation in15 cm layers including cost of sand all labour lead lift etc. complete

Plain ceoment concrete M10, using 12 to 20mm HBG metal for foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete.

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, for Raft concrete including cost of all materials, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement.

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, for columns including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. ( excluding cost of steel reinforcement. For column concrete.)

Upto Ground floor roof

First floor

Second floor

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, for Grade beams,plinth beams including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Retaining wall, cable duct side walls and cover slabs etc.,complete.

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, for Lintels including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Continuous lintel concrete,Complete.

Ground floor

First floor

Second floor

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, Shunshade including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. but excluding cost of steel reinforcement. For Sunshade concrete 60cm projected, 80mm Tk. at wall and 50mm Tk. at free end,etc,complete

Ground floor

First floor

Second floor

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, Roof beams including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof Beam concrete,etc,complete.

Ground floor

First floor

Second floor

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, for 130mm thick slab including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete 130mm Tk.etc,complete

Ground floor

First floor

Second floor

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, for side wall including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Roof slab concrete 100mm Tk. Ground Floor,complete.

PCC M 10 mix using 12-20mm graded hard machine broken granite stone 100mm thick , flooring including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. For Floor concrete.

RCC M 20 mix using 12-20mm graded hard machine broken granite stone, precast slab including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. ( excluding cost of steel reinforcement.) For precast cover slab concrete,etc,complete.

Providing steel reinforcement for RCC works including cost of steel rod binding wire and placing in postion of the steel reinforcement all materials, lead and lift etc., complete.

Brick work in CM 1:5 using II class chamber burnt bricks for basement & superstructure including cost of all materials, all labour lead lift etc ., complete. super structure, including cost of all materials, all labour charges, lead, lift, etc. complete.

Ground floor

First floor

Second floor

Brick work in CM 1:3 using II class chamber burnt bricks for partition wall, including cost of all materials, all labour charges, lead, lift, etc. complete.

Plastering with cm 1:5, 12mm thick for walls including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Plastering with cm 1:3, 12mm thick for ceiling, beams, sunshade,plinth etc. including cost of cement, all materials,curing, labour, lead and lift etc., complete.

Damp proof course using cement mortar 1:3, 20mm thick with water proofing compound including cost of all materials lead lift etc., complete.

Providing projected border 20 mm width in CM 1 : 3. 20 mm thick including cost of all materials, labour, lead, lift, etc., complete.

Providing projected border 7.5 Cm width in CM 1 : 3. 20 mm thick including cost of all materials, labour, lead, lift, etc., complete.

Painting with two coats of approved enamel paint over one coat of primer for all M.S door window, gater etc. including cost of all materilas, labour, lead and lift etc. complete.

Providing Interior wall putty finish two coats with wall core white cement putty material including cleaning the wall surface brush, stone etc., and as directed by the department officers.

Painting two coats with approved quantity White distember over a water base primer as priming coat, for interior ceiling and surfaces including cleaning the plastered surface, cost of all materials, labour, lead, lift, T&P, etc. complete.

Painting the inside walls with two coats of best quality interior emulsion of approved colour over a interior primer coat of all materials, etc., complete.

Painting the outside walls with two coats of exterior emulsion over a primer coat of approved colour and quality including cost of all matreials, lead and lift etc., complete.

Painting the name of Substation over entance wing wall in both Tamil and English using colouring with enamel paints etc., including cost of all material, labour, lead, lift etc., complete

Dadooding walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface , including cost of all materials, labour, lead, lift, etc. complete.

Flooring with approved acid proof tiles over cement mortor 1:3 20mm thick in floor including pointing with white cement finishing the joints flush pointing the surface etc complete.

Flooring with approved ceramic non-slippery tiles of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete

Flooring with approved virtified of non slippery type tiles over cement mortor 1:3 20mm thick including pointing with white cement finishing the joints flush pointing the surface etc complete (sample to be approved by Dept.Engineer)

Supplying and fixing of of approved design and colour 10mm thick Solar reflected ceramic non slippery tiles set in cm 1:3, 10mm thick for Over Roof Slab area including cost of tiles, all lead, lifts, labour for fixing finishing neatly as per standard specification and as directed by the Engineer-in-charge tiles colour and shade to be got approved by the Executive Engineer before use.

Supply & fixing marble partition of 25 mm thick 600 mm wide and 1200 mm high including necessary cement mortar with white cement concrete for urinals as directed by department Engineer at site

Suuply and fixing double side polished 38 mm thick cuddappa slab for cub boards including cost of all materials, labour, lead, lift, etc., complete.

Providing Decorative terracoata tiles over the sun shade slabs / portico etc., and painting two coats including cost of all materials, labour,lead, lift, etc., complete.

Supply and fixing in position of double leaf anodised aluminium glazed main door using door outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M with std.quality hydraulic floor spring, automatic door closure, rubber beedings, hinges, handle, etc., with 5.50mm thick sun cool glass, etc., complete. Double leaf main door

Supply and fixing in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5.50mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door

Supplying and fixing in position aluminium partition partly glazed & partly paneled above 12mm thick both side prelaminated boards [ MDF exterior grade] and 5mm thick machine frosted float glass 9modi, saint gobine or Equivalent0 using aluminium box section of not less than 63x38.4x2mm x 1.174kg/m for vertical @ 955mm c/c approx and horizantals[4Nos] including cost of all materials, labour, lead, liftT&P etc. complete.

Providing false ceiling by using 12.50mm thick perfonated gypsum board in panels using 6mmGI rod suspender ,16 gauge aluminium "T" and "L" including all materials, labour, lead and lift etc., complete.

Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials lead lift etc., complete. .

Supply and fixing in position of UPVC Windows of size 1.94 mx1.65 m as per ISS 1038-1958 (1245 ISS)using window frame bottom two track sliding with glazing clips rubber gaskets ,sliding wheel & 5.5 mm thick sun cool glass panelling including cost of all materials ,locking arrangements ,labour,lead,lifts etc complete.

Supply and fixing of UPVC Ventilator of 0.75m x0.45 m fully glazed lover type as per standard specification with approved section for frame and glass 4mm thick including cost of all materials ,lead,lift ,labour etc complete.

Fabrication, supplying and fixing of MS framed single leaf with GI sheet 18 gauge door using MS angle 40x40x6mm for door frame and MS angle 35x35x5mm for shutter frame with necessary stiffeners using MS flats of size 19x5mm including painting with two coats of enamal paint over one coat of red oxide paint including cost of all materilas, labour, lead, lift etc, complete.

Fabrication, supplying and fixing of MS angle framed window half glazed and half shutter using MS angle of size 35x35x5 mm for window frame and 25x25x5mm for shutter and MS flats 19x4 mm thick for window grill with locking arrangement including painting with two coats of enamal paint over one coat of red oxide paint including cost of all materilas, labour, lead, lift etc, complete.

Supplying and fixing MS grills for windows ,ventilators ,gates MS angle .Flat and square rods as directed by the Engineer at site including painting two coats with enamel paint over a coat of primer cost of materials, labour, lead and lift etc., complete.

Supplying and fixing of Europian type water closet with flushing cistern of Neycer/Parry ware with P"" or "S" trap ,seat cover 15 mm dia connectin hose .2 nos 15 mm dia CP angle valve ,hand shower -1 No. including cost of all materials ,lead lift etc complete as directed by department Engineer at site

Supplying and fixing in position IWC ORISSA PAN of size 580X420mm white glazed earthen ware of approved make & quality with 'P' or 'S' trap conforming to IS - 2556 Part XII [Parryware or Equivalent] with sand cushion and forming flooring around the cloast using 40mm broken brick jelly in lime concrete 1:2:5 [1/lime, 2/sand & 5/brick jelly] 100mm thick and finishing the top to required slope and giving connection to sewer line including the cost of all materials, labour, lead, lift, T&P, etc. complete.

Supplying and fixing in position White glazed Flat back urinal - Size 455 x 350mm of approved make and quality [Parryware -Aquaseal urinal or equivalent] and with PVC pipe connection [Kohinoor], 32mm PVC waste pipe [Kohinoor], 12/15mm GM wheel valve ISI, fixing the urinal to the valve with necessary TW plugs, brass screws etc, connecting to the water main as directed at site including the cost of all materials abour, lead, lift, T&P etc. complete.

Supply and fixing of wash basin of size 560x410mm white and of approved quality and make[Parryware or equivalent] with 12/15mm dia brass CP pillar tap [waterman], 32mm PVC waste pipe [Kohinoor], 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection [Kohinoor] etc. fixing the basin in the wall with GI/Alu. brackets and rag bolt and nut, giving necessary water connection etc., and mirror with beveled edge fixed with suitable CP brass screws etc., complete.

Supply and fixing of multi way PVC floor trap 100 x 75 mm as directed by the Engineer at site cost of all materials, labour, lead, lift, etc., complete.

Supplying and filling with 40mm HBG metal in dispersion trench, rain water harvesting pit including cost of metal, all labour, lead,lift, consolidation etc. complete.

Supplying and fixing of 110mm dia, best quality ventilating shaft 3.65m height with PVC cowl at top and fixing in poistion inlcuding cost of all materials, curing labour, leads and lits etc., complete.

Supplying and fixing in position 110 mm dia PVC soil pipe- 6kg/sq.cm [Finolex or equivalent] with special clamps & PVC shoe at bottom including the cost of all materials, labour, lead, lift, T&P, etc., complete

Supply and fixing 110mm PVC down fall pipe 6kg/cm2 avonplast or Finolex make with required bend, tee and GI wall clamp at 90cm intervals including cost of materials, labour, lead and lift etc., complete.

Providing and laying PVC high density 10 kg/cm2 pipe including cost of all materials, labour, etc., complete.

50 MM dia

40 MM Dia

32 MM Dia

25 MM Dia

20 MM Dia

Supplying and fixing in position of gun metal gate valve leader make of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site

50 MM dia

40 MM DIA

32 MM DIA

20MM DIA

Supplying and fixing in position of gun metal wheel valve leader make of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site

25mm dis

20mm dia

Providing and fixing of long body chromium plated heavy duty metal tap of 12mm size including cost of all materials, labour, etc., complete.

Providing Sintex water tank of capacity of 1000 lits including cost of material, labour, lead, lift, transportation and placing in position over head room etc., as directed by the engineer at site.

Fabrication,Supplying and fixing in position of ladder using GI angle and 16mm dia GI rods of width 45cm including welding, cost of all materials, labour, lead and lift etc., complete.

Supplying and fixing in position of Stainless steel grade 302 , hand rail of 75mm pipe to height of 1000 mm and support of 25mm above square / round including cost of all materials, labour, lead, lift, T&P etc. complete.

Providing MS channels and chequred plates of 8mm thick inside the control room including cost of all mateiral,labour, lead, lift painting etc., complete

Providing inspection chamber with manhole cover of size 600x600 cast iron including cost of all materails lead lift etc complete.

Supplying and fixing black granite stone 0.90 x 0.60 m size Engraved Foundation detail and year of construction fixing in wall at entrance, Digital wall clock 2 Nos, floor coir mat 2000x600 for Entrance 1000x500 - 2 No. for office of approved make and quality including the cost of all materials, leads, lifts etc., complete

Laying fixing if Controflex (slicagel) compound in around ventilator for protection of rain water.

Supplying and fixing of 100mm dia. stoneware pipe with open joint and covered with pan tiles including all cost of materails lead lift etc complete.

Supplying and fixing in position of best quality mirror (22" x 16") with aluminium frame over wash basin including cost of all materials labour, lead, lift, etc. complete as directed by the engineer at site

Supplying and fixing of approved quality of aluminium towel rod with powder coating of size (2 ft) and fixing the same over teak wood round block and soap tray (PVC) in bath room including cost of all materials lead lift labour etc complete as directed by department Engineer at site

Supplying and fixing of PVC shower and Nickle control valve complete

Manufacturing, supplying and fixing in position of RCC jally of 5 Cm thick in Cement concrete 1:2:4 using 20 mm machine crushed stone jelly (Excluding cost of reinforcement steel) including cost of mould, finishing , curing, lifting, fixing in position et

Supplying and laying in position of ceramic channel of 150mm wide for drain of best quality and approved make complying with standard specifications and as directed by the engineer at site including the cost of all materials labour, lead, lift, T&P etc. complete.

Providing sealant materials in the expansion joint in the terrace floor up to a depth of 52mm, cleaning the edges properly to remove dust, stain, oil etc, finishing the edgs with polimer modified mortar viz. mixture of cement, sand with water & poly propylene with water proofing compound, applying Epoxy adhesive on the grooves of 1000 series products & also on the concrete surface, compress & install 'REACT 1000 - A01-044' of vexcolt/ Uk or equivalent for 40mm width in the expansion joint, finishing the system flush with to existing surface, including the cost of all materials, lead, lift, T&P, etc. complete.

Forming expansion joints in roof slab with 18 gauge GI sheets as per 2B plan W.No 2/41 revised TNBP specification.

Fixing of bore well point by well qualified geologist labour T & P including all lead lift etc complete as directed by the department engineer at site.

Drilling of borewell in various soil /hard rock etc., including transportation of Power drill machineries first by taking a pilot bore of 180 mm dia and then drilling 150 mm dia at the bore well point fixed at site.( 0-200m)

Drilling of borewell in various soil /hard rock etc., including transportation of Power drill machineries first by taking a pilot bore of 180 mm dia and then drilling 150 mm dia at the bore well point fixed at site. -(200-350m )

Supplying and providing Heavy duty 180 mm PVC casing pipe with ISI

Supplying &Inserting 40mm dia HDPE hose pipe of make FLOWTEC or equivalent ISI make for suction inside the borewell with supporting clamp including cost of all materials, labour, lead & lift etc., complete as driected by the department engineer at site.

Supplying & Inserting 20mm dia HDPE hose pipe of FLOWTEC or equivalent ISI make for air pipe inside the borwell with supporting clamp including all materials, labour, lead & lift etc., complete as directed by the department engineer at site.

Supplying providing and fixing of 15 mm Dia GI pipe " B " class of a

Supplying and fixing of 180 mm dia PVC End cap approved best quality

Supplying and erection of 7.5HP air compresser 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper rod and 6' long 40mm dia GI pipe for earting and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete and placing motor over bed, labour charge for placing motor over bed including cost of all materilas lead and lift etc, complete as driected by the department engineer at site.

Supplying and erection of 2HP mono block 3 phase electrical motor of approved brand with all related accessories as per IsI in all respect including oil level indicator switch board with 3 Nos. test lamp, 3 Nos. fuse carrier, 1 No. 15AMPS DPIC swithch with L&T make starter with guard and providing earthing to main with no. 8 tinned copper wire rod and 6' long 40mm dia GI pipe for earthing and earth pit filled with charcoal and salt as per standard spectification and laying motor bed by concrete with placing motor over bed, labour charge for placing motor over bed including cost of all materilas lead and lift etc, complete as driected by the department engineer at site.

Wiring with 2 x 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed multistrand Copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with Steel switch box and 5A F.T switch with continuous earthwire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (SD 22)

Supply and run of 2x 1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed copper conductor of 1100 V grade. (SD 53)

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall ,with 150x100x113mm Tw switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.(SD38)

Wiring with 2 x 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150 mm x 100 mm x 113 mm Steel switch box with 3 mm thick hylem sheet for 15 A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion, with suitable colour for concealed power plug point. (SD 40)

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work. (SD 173)

Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only. (SD 163)

Supply and run of 4 of 4 sq.mm (56/0.3) PVC insulated multi strand unsheathed copper conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour. (SD 60)

Supply and fixing of single flu. fitting complete with LED light with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from the terminals to the fitting with flu. tube.

4' X 40w Single Industrial type fitting

4'x20 W Single Box type fitting

Supply and fixing of 4'x20 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with LED light with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes. (SD 91)

Supply and fixing of W.T bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for LED lamp with guard and 1No 20 W LED bulb.

Supplying and fixing of 2 x 36 W LED Street light fittings crompton make (SFE 1624 HSBN) including cost of all materials, labour, lead, lift etc., complete, as per standard specification.

Supply and fixing of fancy glass shade and 18 W LED for BH point.

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. (SD 107)

Supplying and fixing of 1200mm sweep AC ceiling fan with electronic requlator with 300mm down rod on the existing clamps of approved quality of Crompton/Rally/ usha/bajaj including cost of all materials lead lift etc complete.

Supply and fixing of sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI make , 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (like standard make). (SD 179)

Earthing as per PWD standard with an earth electrode of 2 Mtr. Class 'B' GI pipe of dia not less than 32 mm complete with necessary masonry work. (SD 234)

Supplying and fixing of split Air Conditioner (3 phase -2 Ton capacity) of approved make (Dikin or equivalent) with all accessories including stabilizer( V guard) with reputed make including cost of all materials, leads, lift, fixing charges, etc., complete as per standared specification complete.

Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection (For AC plug) [Legrand (MDS) / Hager (L&T) make]. (SD 134-B)

Supplying and laying of 4 core 16 Sqmm copper PVC armoured LTUG cable including cost of cable, lead, lift, labour charge, etc., complete.

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work,with earth connections. (SD 176)

Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete.

Supplying and laying 25 mm dia 10 kg PVC pipe of approved quality for AC unit water drain pipe including cost of all materials, lead, lift, labour charge, etc., complete.

Supplying and fixing 5/8" copper tube for connecting AC panel to AC out door unit including cost of all materials, lead, lift, labour charge, etc., complete.

Supplying, Fixing of buzzers with 5A bell push switch etc complete.

Drilling 4½" dia hole in brick wall and fixing suitable size PVC pipe in wall for providing cables for out door condencing unit including cost of all materials, lead, lift, labour charge, etc., complete.

100 mm dia

50 mm dia

Providing opening for cable,Exhaust fan AC duct, water pipe line etc in brick work/RCC in building and retaining wall& cble duct including cost of machinaries labour etc complete

Brick wall

RCC concrete

Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick (gareware or equivalent )including the cost of all materials, labour, lead, lift, T&P, etc. Complete.

Supplying and sticking the name / designation stickers in doors identifying the rooms including cost of material, labour etc. complete.

Providing locking arrangements with 6 lever Godrej lock with 3 keys including cost of all materials, labour, lead and lift etc., complete.

Suppling of TANSI or Equivalent make Furnitures including cost of all materials, labour, lead and lift etc., complete.

S type chair

3 Drawer Steel table

Steel side Rack

Steel half Bench

Revolving chair

Operater Table 6x5

Pvc Chair

Steel Stool

Suppling and erection of Rolling Shutter Pull & push Type including cost of all materials, labour, lead and lift etc., complete.

Providing casing pipe line for laying cable to breaker plinths with 110 mm dia PVC pipe 6 kg/cm2 including all specials and cost of all material, lead, lift, etc., complete as per standard specification.

Supplying and fixing the paver block colour coated of 65 mm thick to the foot path of the operational switches inside the 230/110 yard including the cost of all materials, leads, fixing charges, lifts etc., complete

Supplying, transporting fabrication, fixing Labour charges for fixing of appd quality of MS Rails (90 LBS) for transformer plinth in proper alignment and interconnections the Steelo rails with flat on both ends by welding including cost of rail, all materials labour charges, lead, lift etc. complete, as per standard specification

Supplying and spreading 100 mm thick of 20mm metal over crusher dust of 100 thick including cost of labour for spreading lead, lift, etc. complete.

Supplying and spreading 100 mm thick of 40mm metal over crusher dust of 100 thick including cost of labour for spreading lead, lift, etc. complete.

Supplying and fixing readymade earth collars of size 75 cm dia with 60 cm height and shell thickness of 50 mm with cover slab including cost of all materials, transport to site, labour, lead, lift, etc., complete as per standard specification.

Fabricating, supplying and fixing of Main gate using structural steel angles, flats, plates, squares etc., as per specification and as directed and painting with two coats of approved colour enamel paint over one coat of red oxide primer including cost of steel and painting materials, lead, lift, labour, as per standard specification, etc., complete.

Colour washing with two coat of colour cement over over one coat of cement primer for exterior surface including cost of all materials, labour lead, lift brush etc., complete.

Supplying and fixing of colour coated roofing sheet of 0.50mm thick for D.G set room including all leads.lifts,labour etc complete

Disposal of Excess of surplus earth away in low lying area with a lead of 100 Mts including spreading and levelling labour, lead, lift as per standard specification, etc., complete.

Fabrication and supplying of Foundation bolt threading for a length of 15 cm at top and hot dip galvanising of bolt including supply of 3 nos of GI nuts and washers and fixing in the position as directed by the engineer at site including assembling of template etc., cost of template, all material, labour, lead, lift etc., complete

Various Size of Grouting Bol & Nuts

Assembling of template for lattice Structure For VC coumn, For CT, PT,LAS, WT, CVT Insullator supports AB switch supports including cost of template, transport charges all labour lead, lift, etc, complete.

Supplying, transport and erection of "H" type towers, booms and all other lattice structure including cost of all materials for G.I angles, hot tip galvanising, all labour, lead, lift, etc. complete.

Supplying and transport of various size of ISI GI Bolt&Nut and washer as per IS standards and approved by competent authority before erection as per the requirement to site including cost of material lead lift labour etc complete.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix, using 12 to 20mm HBG machine crushed metal, with form work including cost of cement, all materials labour, curing, all leads & lifts, vibrating charges, including cost of centering, shutting, as per standard specification, etc., complete. ( but excluding cost of steel reinforcement)

Culvrt Slab

Labour charges for transporting of all types of cable duct cover slab to working site to curing tank, curing tank to keeping them alignment in position including lead, lift etc., complete

Labour charges for cutting GI/MS angles to required length and fixing and keeping in cable duct including all leads,lifts, etc complete.

Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150mm thick plastering with CM 1:3, 20 mm thick including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete. as per standard specification.

Supplying and fixing of GI angle for cable duct including cost of all materials, fabrication, cutting ,labour, curing, all leads, and lifts, etc., complete. as per standard specification.

Plain cement concrete M15, using 12 to 20mm HBG metal for foundation without formwork including cost of cement, all materials, labour, lead, lift, etc. complete.

Paving the road surface with Rubber moulded hydraulic pressed paver blocks of any colour 60mm thick of approved design to withstand a load of 10tonnes, to set over a layer of sand bed for 10 CM fixing with vibrators. including cost of all materials, paving charges to uniform level and slope, transporting, stacking, curing etc., complete as directed by the Engineer-in-charge.

Providing laying Wet mix mecadam pavement in the yard with 75mm compacted thickness with grade metal using 1 Cum of 40mm IRC metal with 0.24 cum of quarry dust mix for blindge for 10 Sqm including cost and conveyance of all materials and stacking them at site to dept. gauge for pre measurment, labour for spreading metal and gravel, hand packing to camber watering with all leads etc, complete. as per standard specification.

Suppling and fixing of 40mm dia 15Kg /cm2 including Cost of all labour,lead,lift etc,complete

Suppling and fixing of 150 mm dia 15Kg /cm2 including Cost of all labour,lead,lift etc,complete

Supplying and laying Labour charges for tying barbed wire 9 rows horizantally and sprial binding at 0.5m interval including straightening ,tying with GI binding wire , lead, lift,etc, complete as directed by department Engineer at site.

Supplying and fixing in position 300mm long eye bolts with nuts and washer for tying the barbed wire in corner post etc., including cost of all materials, lead, lift, labour charges etc., complete.

Description of Work / Item(s)

Amount

I. Transformers

Supply of 230/110 KV, 100 MVA Auto Transformer with RTCC Panel and all accessories, with Terminal Connectors and with Neutral CT for enabling REF Protection and OLTC with RTCC and must be compatible with the SAS and NIFPS (Nitrogen Fire Injection Protection System with Spares (Spare Nitrogen Cylinder - 1 No, Heat sensor for Fire detectors - 3 Nos, Regulator Assembly-1 No) ]

Supply of Station Transformer, 250 KVA, 22 KV/433 V Station Transformer with 22 KV HG Fuse Sets, 22 KV LAs - 6 Nos, Structure materials complete Set, 4 Way FRP Pillar Box, 22 KV (1250 A) Isolators 5 Nos with 22 KV Outdoor PT - 2 Nos (2 Core) with junction Box for Terminal connection, Insulators, all Consumables, Cables and all accessories for Station Transformer

Supply of 250 KVA DG Set Complete Set with all accessories and Protections Outdoor type, Protection Relay Panel, Extension of Exhaust Pipe with suitable size and quality MS Pipe upto Building outside through Silencer and properly insulating with suitable thermal insulating materials, Plinth concreting, Erection of AMF Panel with Battery Set, Control and Power Cable laying including all Consumables and commissioning and DG Room at First Floor Level, Steps leading to DG Set provided with Hand Rails.

II. Equipments

Supply of 245 KV, 2000 A, 50 KA/3 Sec, Outdoor SF6 Breaker with all accessories and Support Structure

Supply of 145 KV, 2000 A, 40 KA/3 Sec, Outdoor SF6 Breaker with all accessories and Support Structure

Supply of 245 KV, 2000 A, 50 KA, 5 Core, Single Phase Outdoor Current Transformer with Support Structure, T.C and all accesssories (1 No Junction Box for 3 CTs) (Ratio: 2000 - 1200 - 800 - 400/1 A, 0.2s & PS)

Supply of 145 KV, 2000 A, 40 KA, 5 Core, Single Phase Outdoor Current Transformer with Support Structure, T.C and all accesssories (1 No Junction Box for 3 CTs) (Ratio: 2000 - 1200 - 800 - 400/1A, 0.2s & PS)

Supply of 230 KV, 3 Core, Single Phase, Outdoor Line Voltage Transformers (LVT) with Support Structure, T.C and all accesssories (1 No Junction Box for 3 LVTs) (Ratio: 230KV/√3 / 110V/√3-110V/√3-110V/√3, 0.2S & PS)

Supply of 230 KV, 3 Core, Single Phase, Outdoor Potential Transformers (PT) with Support Structure, T.C and all accesssories (1 No Junction Box for 3 PTs) (Ratio: 230KV/√3 / 110V/√3-110V/√3-110V/√3, 0.2S & PS)

Supply of 110 KV, 3 Core, Single Phase, Outdoor Line Voltage Transformers (LVT) with Support Structure, T.C and all accesssories (1 No Junction Box for 3 LVTs) (Ratio: 110KV/√3 / 110V/√3-110V/√3-110V/√3, 0.2S & PS)

Supply of 110 KV, 3 Core, Single Phase, Outdoor Potential Transformers (PT) with Support Structure, T.C and all accesssories (1 No Junction Box for 3 PTs) (Ratio: 110KV/√3 / 110V/√3-110V/√3-110V/√3, 0.2S & PS)

Supply of 230 KV Lightning Arrester with Support Structure and all accessories

Supply of 110 KV Lightning Arrester with Support Structure and all accessories

Supply of 245 KV, 2000 A, 40 KA Isolator with Earth Switch (Motor Operated) with Insulator, Support Structure, T.C and all accessories

Supply of 245 KV, 2000 A, 40 KA Isolator without Earth Switch (Motor operated) with Insulator, Support Structure, T.C and all accessories

Supply of 245 KV, 2000 A, 40 KA Isolator without Earth Switch (Motor operated) with Insulator, T.C, all accessories and without Support Structure (Top Mounted By pass Switch)

Supply of 245 KV, 2000 A, 40 KA Bus Earth Switch (Single Phase) (Motor operated) with Insulator, Support Structure, T.C and all accessories

Supply of 145 KV, 2000 A, 40 KA Isolator with Earth Switch (Motor operated) with Insulator, Support Structure, T.C and all accessories

Supply of 145 KV, 2000 A, 40 KA Isolator without Earth Switch (Motor operated) with Insulator, Support Structure, T.C and all accessories

Supply of 145 KV, 2000 A, 40 KA Bus Earth Switch (Motor operated) with Insulator, Support Structure, T.C and all accessories

Supply of 245 KV Solid Core Insulators (Bus Post Insulator) with Support Structure and Terminal Connectors

Supply of 145 KV Solid Core Insulators (Bus Post Insulator) with Support Structure and Terminal Connectors

III. Battery, Battery Chargers & Power Room Accessories

Supply of 220 V, 300 Amphere Hour (AH) Battery (Transparent SAN Container) complete Set with Wooden Stand, Insulators and Terminal Connectors, Electrolyte, Hydrometer, Room Thermometer and Digital Multimeter

Supply of 220 V DC, 60 Amps Battery Charger with Potential Free Contacts for all indications for SAS Interface.

Supply of 48 V, 400 Ampere Hour (AH) Battery (Transparent SAN Container) complete Set with Steel/Wooden Stand, Insulators and Terminal Connectors, Electrolyte, Hydrometer, Room Thermometer and Digital Multimeter

Supply of 48 V DC, 80 Amps Battery charger with Potential Free Contacts for all indications for SAS Interface.

Supply of AC Distribution Panel with Two incomer - As per Field Requirement (AC Under Voltage, Over Voltage Static Relays included)

Supply of 220 V DC Distribution Panel with DC Fail Alarm provision and as per Field Requirement (DC Under Voltage, Over Voltage Static Relays included)

Supply of 48V DC Distripution Panel with DC Fail Alarm provision and as per Field Requirement (DC Under Voltage, Over Voltage Static Relays included)

400 A AC Change Over Switch

Supply of 60 A DC Change Over Switch with Bypass arrangement as per Field Requirement

Supply of 80 A DC Change Over Switch with Bypass arrangement as per Field Requirement

BMK - AC Junction Box (FRP) with MCBs as per Field Requirement

BMK - DC Interlock Box (FRP) with MCBs as per Field Requirement

IV. Supply of Indoor & Outdoor Panels (SAS)

Control & Protection Panel for 230 KV Feeders

Control & Protection Panel for 230 KV Bus Coupler

Control & Protection Panel for 230 KV/110 KV Auto Transformers

Control & Protection Panel for 230 KV Bus Bar Protection Relay Panel (Up to 23 Bays)

Synchrinizing cum Islanding Panel for 230 KV Bays (SAS)

Outdoor SAS Process interface Panel for 230 KV Feeder- 220 V DC Control with weather proof Stainless Steel Cabinet.

Outdoor SAS Process interface Panel for 230 KV Bus Coupler- 220 V DC Control with weather proof Stainless Steel Cabinet.

Outdoor SAS Process interface Panel for 230 KV HV and 230 KV/110 KV Auto Transformer - 220 V DC Control with weather proof Stainless Steel Cabinet.

Outdoor SAS Process interface Panel for 230 KV Bus VTs and General Inputs and Outputs for 230 KV SS - 220 V DC Control with weather proof Stainless Steel Cabinet.

Control & Protection Panel for 110 KV Feeders

Control & Protection Panel for 110 KV Bus Coupler

Control & Protection Panel for 110 KV Bus Bar Protection Relay Panel (Up to 23 Bays)

Synchrinizing cum Islanding Panel for 110 KV Bays (SAS)

Outdoor SAS Process interface Panel for 110 KV Feeders - 220 V DC Control with weather proof Stainless Steel Cabinet

Outdoor SAS Process interface Panel for 110 KV Bus Sectionaliser- 220 V DC Control with weather proof Stainless Steel Cabinet

Outdoor SAS Process interface Panel for 110 KV LV - 220 V DC Control with weather proof Stainless Steel Cabinet

Outdoor SAS Process interface Panel for 110 KV Bus VTs and general inputs and outputs for 110 KV- 220 V DC Control with weather proof Stainless Steel Cabinet

Digital Sub-Station Automation System (For 20 Nos Bays Comprising 6 Nos 230 KV Bays, 7 Nos 110 KV Bays) Including 1 No 230 KV Future Bay & 4 Nos 110 KV Future Bays - 220 V DC Control.

Supply Essential Spares for Digital Sub-Station Automation System, SAS Process interface Panels as per CRP & SAS Specification [ Rate includes for Item No. (a) to (r) ]

Switchgear Control Unit for 230 KV Bay

Switchgear Control Unit for 110 KV Bay

Intelligent Electronic device for acquisition of Alarms, Status, indications for Station auxiliaries.

Merging unit for Main Protection, Bus Bar Protection & SCU

Merging unit for Bus Bar Protection for 230 KV/110 KV Bay

Merging unit for Main/Backup Protection for 230 KV/110 KV Transformer

Merging unit for Main Protection for 230 KV/110 KV Bus Coupler

Merging unit for Protection for 230 KV/110 KV Bus VTs (8 Analog Inputs)

Merging unit for Main Protection for 110 KV Feeder (5 Analog Inputs)

Merging unit for Backup Protection for 110 KV Feeder (4 Analog Inputs)

Ethernet Switch for LAN for IEC 61850-8-1 LAN

Ethernet Switch for LAN for IEC 61850-9-2LE LAN

Hard disk for HMI Server

Spares for GPS Equipment (1 Set comprises Hardware Modules of each Type)

Spares for Inverter for SAS (Includes all necessary Spares for maintenance of Inverter for 5 years IGBT should also be included)

Line Interface Unit for SAS FO LAN

Media Converters (AppliCable as per Scheme) for SAS Application

Auxiliary Relays (Electro mechanical Type) (Each Set covers 1 No of all Type)

Supply of Essential Spares for 230 KV & 110 KV Control & Protection Panels as per CRP & SAS Specification [ Rate includes for Item No. (a) to (r) ]

Bay Control Unit for 230 KV Bay

Numerical Main-1 Relay for 230 KV Line Differential Protection.

Numerical Main-2 Relay for 230 KV Line Differential Protection.

Numerical Main Protection Relay for 230 KV/110 KV Transformer Protection.

Numerical Backup Protection Relay for 230 KV/110 KV Transformer Protection.

Numerical Protection Relay for 230 KV Bus Coupler Breaker

Spares for Numerical Relay for 230 KV Bus Bar Protection Relay (1 Set comprises Hardware Modules of all Type)

Bay Control Unit for 110 KV Bay

Numerical Main Protection Relay for 110 KV Line.

Numerical Backup Protection Relay for 110 KV Line.

Numerical Protection Relay for 110 KV Bus Coupler Breaker

Spares for Numerical Relay for 110 KV Bus Bar Protection Relay (1 Set comprises Hardware Modules of each Type)

Electronic Trivector Meter (ABT)

Auxiliary Relays (Electro mechanical Type) (Each Set comprises 1 No of all the Types)

D.C. Supply Supervision Relay

Line Interface Unit for SAS FO LAN

Supply of Armoured Fibre Optic Cable along with all the accessories for connectivity between Outdoor SAS Process Interface Panels and Control & Protection Panels, Digital Substation Automation System and Wherever Required

V. Supply of Communication & Station Equipments

Supply, Erection, Testing and Commissioning of ADSS 24 Fibre Cable with HDPE Pipe from Terminal Towers to Control Room at Poolavady 230/110 KV SS

Supply of Optical Line Terminal Equipments Hybrid type with Cross connect Multiplexor (For Tirupur, Palladam, Anikadavu & Poolavadi Substations

Supply of Digital Protection Coupler with complete accessories including Remote End SS (8 Command) Main/Stand alone

Supply of Hybrid EPAX (16S/16T) (Analog + Digital + VOIP System) with Complete Accessories

Supply of Telephone Cable (4 Pair- 5 Nos,each with 500 m)

Supply of Telephone

VI. Supply of Scientific & Testing Instruments

Computerized Relay Testing Kit with Advanced Package and Latest Laptop (Omricon make CMC-356 essential Package + Advanced Distance + Differential + Advanced Transplay + GOOSE + OCC + OC IDMT & Dir Element Module + Transducer testing option + 3 Years warranty + Laptop + CMGPS588 + 400 PTL temPlates to test automatic testing + PTP Time Synch option + Transport casing - Rugged Hard Carry Case with Trolley.

Multi Function Transformer Testing Kit ( Omricon make CPC- 100 with CPTD12 + CT / VT / CVT + CP RC + Transformer Test Card + Switch Box for Automatic testing + Primary Injection up to 2000 A )

Circuit Breaker Analyzer Multi Break Kit with DCRM and Laptop Computer M/s.Omicron Make CIBINO 500 with all Accessories.

Fluke 87 V True RMS Industrial Multimeter with Tempreature.

10 KV Digital Insulation Tester (Rechargeble Battery operated) Megger Make S1-1068-10 KV with all Accessories.

1 KV Digital Insulation Tester

Automatic Tan Delta Test Kit with variable Fequency

Handheld Digital True Rms AC/DC Currents upto 2000 A Clamp Meter (Fluke 355 True RMS Clamp Meter 2000 A AC/DC )

Digital Mini Clamp Meter (for mA Current Measurement Range 20 mA - 200 mA - 2 A - 200 A ) Fluke 368/Megger DCM 305E with all Standard Accessories, Functions and Features enabled.

Digital Earth Resistance Clamp on Meter (Megger DET14C or equivalent advanced model)

Bit Error Meter (E1 Tester)

Ferruling Machine

Digital Level Meter (Electronika make ET-91)

SF6 Gas Analyzer to measure dew Point Purity of SF6, SO2 (WIKA Model GA11 or EMT Model IR Zero waste SF6 Analyzer)

Thermovision Camera

OTDR (Optical Time Domain Reflecto) Meter (Yokogawa Make AQ1216F Model)

Optical Power Meter VIAVI OLP35

Optical Laser Source Meter VIAVI OLS35

Optical Spilicing Equipment SUMITOMO 82C Model/Fujikura FSM 80S (80C+)

Oil BDV Testiong Electronic Test with accessories

Current Transformer Analysing Kit (Latest)

VII. Supply of Clamps & Connectors for Main Scheme

220/110 KV - Double Tension Fitting for Twin Zebra Conductor Space 225 mm with Turn Buckle - RDTS - 2

220/110 KV - Double Tension Fitting for Twin Zebra Conductor Space 225 mm with out Turn Buckle - RDTS - 2A

Corona Bell for 75mm Alu. Bus Bar - Clamp No: 74/94

Corona Bell for 50 mm Alu. Bus Bar

Free End Clamp for 75 mm Alu. Bus Bar

Seating Block for 75mm Alu. Bus Bar

PG Clamp for Zebra Conductor

Reducer Clamp for 75mm Alu. Bus to Twin Zebra

230 KV Rigid Type Spacer Clamp to suit Twin Zebra ACSR at 225 mm Spacing Clamp No: 73

110 KV Rigid Type Spacer Clamp to suit Twin Zebra ACSR at 225 mm Spacing Clamp No: 93

T-Clamp for 75 mm Bus to Single Zebra (75SZ)

T-Clamp for 75 mm Bus to Twin Zebra (220 KV TEE Connector to suit 3" IPS Alu.Tube on Twin Zebra ACSR (VA) - Clamp No: 61)

T-Clamp for Single Zebra to Twin Zebra (220 KV TEE Connector to suit Single Zebra ACSR on Run to Twin Zebra ACSR on tap - Clamp No: 66)

132 KV TEE Connecter to suit Single Panther ACSR on Run to Twin Zebra ACSR on Tap - Clamp No: 86

C - Type Fired Boltless Wedge Connectors for Zebra to Zebra ACSR Conductor - Clamp No: WDG)

230 KV Connector on BPI Insulator to suit Twin Zebra ACSR (HA) - Clamp No : 20 RT

110 KV Connector on BPI Insulator to suit Twin Zebra ACSR (HA) - Clamp No : 30 RT

230 KV Terminal connector on Underhaung BPI Insulator to suit Twin Zebra ACSR through Type - Clamp No : 21 T

110 KV Terminal connector on Underhaung BPI Insulator to suit Twin Zebra ACSR through Type - Clamp No : 31 T

Welding Sleeves to suit 75mm Aluminium Bus Bar - 88.9 OD/ 73.66 ID - Clamp No: 75

VIII. Supply of Clamps & Connectors along with Equipments (Contractor's Scope & Hence Rates Not Mentioned)

230 KV Terminal Connector on 100 MVA Auto.Tr HV Bushing to suit Twin Zebra ACSR (VA) Clamp No:1ALT

110 KV Terminal Connector on 100 MVA Auto.Tr LV Bushing to suit Twin Zebra ACSR (VA) Clamp No:1BLT

230 KV Terminal on SF6 Breaker to suit Twin Zebra ACSR (HA) - Clamp No:12T

230 KV Terminal on CT to suit Twin Zebra ACSR (HA) - Clamp No:13T

230 KV Terminal on LAS to suit Twin Zebra ACSR (HA) - Clamp No:16T

230 KV Terminal on VT to suit Twin Zebra ACSR (HA or VA) - Clamp No:17T or 18T

Switch End Clamp for 75 mm Alu. Bus Bar (Rigid Type) (230 KV Terminal Connector on HDB Isolator to suit 3" IPS Alu.Tube - Rigid Type Clamp No: 15R)

Switch End Clamp for 75 mm Alu. Bus Bar (Expansion Type) (230 KV Terminal Connector on HDB Isolator to suit 3" IPS Alu.Tube - Expansion Type Clamp No: 15E))

Switch End clamp for Twin Zebra (230 KV Terminal Connector on HDB Isolator to suit Twin Zebra ACSR (HA) - Clamp No: 15T)

132 KV Terminal on SF6 Breaker to suit Twin Zebra ACSR (HA) - Clamp No:22T

132 KV Terminal on CT to suit Twin Zebra ACSR (HA) - Clamp No:23T

110 KV Terminal on LAS to suit Twin Zebra ACSR (HA) - Clamp No:26T

110 KV Terminal on VT to suit Twin Zebra ACSR (HA or VA) - Clamp No:27T or 28T

Switch End Clamp for 75 mm Alu. Bus Bar (Rigid Type) (132 KV Terminal Connector on HDB Isolator to suit 3" IPS Alu.Tube - Rigid Type Clamp No: 25R)

Switch End Clamp for 75 mm Alu. Bus Bar (Expansion Type) (132 KV Terminal Connector on HDB Isolator to suit 3" IPS Alu.Tube - Expansion Type Clamp No: 25E)

Switch End clamp for Twin Zebra (132 KV Terminal Connector on HDB Isolator to suit Twin Zebra ACSR (HA) - Clamp No: 25T)

IX. Supply of Control and Power Cables with Glands, Tag and other Accessories

Armoured Copper Control Cable 2 CX 2.5 Sq.mm

Armoured Copper Control Cable 4 C X 2.5 Sq.mm

Armoured Copper Control Cable 4 C X 4 Sq.mm

Armoured Copper Control Cable 8 C X 2.5 Sq.mm

Armoured Copper Control Cable 8 C X 4 Sq.mm

Armoured Copper Control Cable 14 C X 2.5 Sq.mm

Armoured Copper Control Cable 20 C X 2.5 Sq.mm

Armoured Copper Control Cable 4 C X 16 Sq.mm

Armoured Copper Cable 4 X 120 Sq.mm

Armoured Copper Cable 2 X 70 Sq.mm

Supply of ISI mark ST Gland 19 mm as per direction of the Field Engineer.

Supply of ISI mark ST Gland 22 mm as per direction of the Field Engineer.

Supply of ISI mark ST Gland 25 mm as per direction of the Field Engineer.

Supply of ISI mark ST Gland 28 mm as per direction of the Field Engineer.

Supply of ISI mark ST Gland 32 mm as per direction of the Field Engineer.

Supply of ISI mark ST Gland 35 mm as per direction of the Field Engineer.

Supply of ISI mark ST Gland 50 mm as per direction of the Field Engineer.

Supply of Lugs, Ferrules, Sleeves, Cable Tie, Insulation Tape and other accessories for providing Cable Core End Termination

Supply of GI Ladder type Cable Tray 2.5 m Length, 0.450 m Width and 2 mm thickness with coupling Plate and Bolt Nuts

Supply of GI Ladder type Cable Tray 2.5 m Length, 0.300 m Width and 2 mm thickness with coupling Plate and Bolt Nuts

Supply of GI Ladder type Cable Tray 2.5 m Length, 0.150 m Width and 2 mm thickness with coupling Plate and Bolt Nuts

X. Earthing System

Supply of materials for Earth Pit of 115 mm dia to a depth of 6 m including cost of materials for Earth electrode using M.S.Rod 40 mm dia, M.S.Angle, Red Soil and Bentonite powder of 30 Kg and other sundries as per approved drawing . Identification Board of size 300 X 150 mm 14 SWG, GI Bolt, Nut & Washers as directed by the Field Engineer as per DRG No: TR/GCC/CBE/230-110-33-22-11-EP/044

Supply and providing of 600 mm mean Dia, 300 mm Height, 36 mm Thick Cement Coller for identification of Earth electrode location including 1 perimeter and 2 coats of Colour wash as directed by the Field Engineer

Supply of MS Flat 75 x 12 mm for Earth Mat and linking connections to Earth electrode - 136.65 MT

Supply of MS Flat 65 x 10 mm for Earth Raiser for all 230 KV Structures, 230 KV Equipments, 230 KV Auto Transformer, all Panels, Earth Spike Connection to Main Mat/Pit and LLM Structures

Supply of MS Flat 50 x 8 mm for Earth Raiser for all 110 KV Structures, 110 KV Equipments Terminal Towers, Fencing Poles and Yard Lights

Supply of Earth Spikes by using 40 mm M.S. Rod & GI Earth Pipe at a height of 3 m, MS Angle, Bolt, Nut with Washers (40 mm Dia, 3 m length)

XI. Supply of Station Auxiliaries

Supply of 230 KV Solid Core Insulators for Main Scheme

Supply of 230 KV Solid Core Insulators along with Isolators & BPI (Contractor's Scope & Hence Rates Not Mentioned)

Supply of 110 KV Solid Core Insulators for Main Scheme

Supply of 110 KV Solid Core Insulators along with Isolators & BPI (Contractor's Scope & Hence Rates Not Mentioned)

Supply of 11 KV, 120 KN Antifog Strain Disc Insulators

Supply of 75 mm Dia Aluminium Bus Bar (IPS Tube)

Supply of 50 mm Dia Aluminium Bus Bar (IPS Tube)

Supply of ACSR Zebra Conductor (54/3.18 mm + 7/3.18 mm)

Supply of GI Checkered Plate 6 mm thick for Control Room Cable Duct Cover

Supply of Rubber Mat 2000 X 1000 X 10 mm

Supply of Trolley mounted adjustable Telescopic GI Ladder 12 metre Height (Motor Operated)

Supply of Aluminium Ladder 8 metre Length

Supply of Aluminium Ladder 4 metre Length

Supply of Discharge Rod 10 Feet, (SS Type) made up of Hard PVC, Copper Flats and 6 Sq.mm.Cable as per IS Standard & as directed by the Field Engineer

Supply of Earth Rod 10 Feet, (SS Type) made up of Hard PVC, Copper Flats and 6 Sq.mm.Cable as per IS Standard & as directed by the Field Engineer

Supply of First Aid Box

Supply of Gauntlets

Supply of Digital Clock for GPS Time calibration

Supply of Portable Emergency Lamp with Rechargeable Type as per IS Standard & as directed by the Field Engineer

Supply of Emergency Lamp wall mounted with Battery Back up

Supply of Flexible Copper Tape/Rope, Flexible braided Copper for interlinking Panel Earthing and for providing connectivity whereever necessary/any other purpose/on any sizes including the cost of Copper Lugs at both ends as directed by the Field Engineer

Supply of Illumination for Switch Yard, Light Mast Tower and GI Tubular Pole as per Specification and Design, including all Materials, AC JB, DBs and Consumables using LED Technology for arriving lux 30 for 230 KV DAIS SS

Supply of Yard Light Stepped Tubular Pole 8 m Length Double Bracket Pole with base Plate (400 x 400 x 10 mm) 114.30 mm OD, x 5.40 mm thick, 4500 mm Length, 88.90 mm OD, x 4.85 mm thick, 1750 mm Length, 76.10 mm OD, x 3.25 mm thick, 1750 mm including cost of LED Light, Double Pole MCB, Fittings, Junction Box and Painting in complete shape as per direction of Field Engineer and approved drawing.

Supply of Various size GI/MS Iron & Steel Items such as R.S.Joist, Channels, Angles, Plates, Flats etc., for mounting Channel of Control and Protection Panels, Cable Tray for OD CT, PT & LVT, CC Equipments, AC, DC, Battery Charger, Inverter, RTCC Panel Strucures, Boards, Platforms Equipments & Transformer, Fire Equipment Stands, Water & Fire Bucket Stands, Equipment Board, Bay Marking Boards, Earth Pit Name Plate Boards and Fabrication of all TemPlates .,including painting and others whatever as required by the Field Engineer.

Supply of Various Size GI Angles & Plates for Various Size of Cable Duct's Tray Mounting and Laying Supports

Supply of Red Oxide Paint of reputed make including cost of Paint, Brush and consumables etc., for Painting of all Earth Raisers and MS Materials

Supply of Aluminium Paint including cost of Paint, Brush and consumables etc., wherever necessary

Supply of Anti Corrossive Black Paint of reputed make including cost of Paint, Brush and consumables etc., for Painting of all Joints in Earth Raiser connections and Earth Mat

Supply of Enamel Paint of reputed make of various colours for Colour coding Painting of Bottom of all Structures, Equipments and Name Boards as per Field Requirement

Supply of Reflector Sticker of reputed make for Colour coding of all Equipments and Structures and any other Details of Breakers, Panels, chargers and General Key Boards as required and as directed by Field Engineer,

XII. Supply of Fire Fighting Equipements

Supply of Mechanical Foam (AFFF) type Trolley mounted 45 or 50 litre capacity AFFF Fire Extinguishers with initial charge, complete with Hose & Air induction Nozzle and in general all accessories confirming to the latest issue of IS 13386 with ISI Certification mark

Supply of Mechanical Foam Portable type 9 litre capacity Fire Extinguishers with initial charge complete with Chromium plated GM Cap, high pressure Nylon braided discharge Hose with specially designed Foam designed Nozzle and in general all accessories strictly confirming to the latest issue of IS 10204 with ISI Certification mark

Supply of Dry Chemical Powder type Trolly mounted Cylindrical shape 25 kg capacity Fire Extinguisher with initial charge & complete with Rubber or braided Hose, Dry Powder with level Indicator and all accessories confirming to the latest issue of IS 10658 with ISI Certification mark

Supply of Dry Chemical Powder type Cylindrical shape 9 or 10 kg capacity Fire Extinguisher withl initial charge & complete with Rubber or braided Hose, Dry Powder with level Indicator and all accessories confirming to the latest issue of IS 2171 and 1 with ISI Certification mark

Supply of Dry Chemical Powder type Cylindrical shape 5 or 6 kg capacity Fire Extinguisher withl initial charge & complete with Rubber or braided Hose, Dry Powder with level Indicator and all accessories confirming to the latest issue of IS 2171 and 1 with ISI Certification mark

Supply of Fire Protection Alarm System for Control Room and Cable Gallery

Manufacturing and Supply of Fire Bucket of 10 litre capacity made out of 26 (0.46 mm) SWG M.S Sheet painted with white & Red Enamel Paint in side & out side respectively; Bottom of Bucket shall be 'U' shaped out side of the Bucket shall be written as Fire in English & Tamil in white Enamel Paint, including cost of all Materials.

Manufacturing and Supply of Sand Drum made out of Oil Drum of Size 580 mm dia and 420 mm height with Conical Cover made out of Tin Sheet provided with Handle including the cost of Barrel, Sand and Consumables as directed by the Field Engineer.

Supply of Fire Shed suitable to storing outdoor Fire Fighting Equipments near Auto Transformer and 230 KV Breakers

Supply of Fire Equipment Stand suitable to Battery Room

Supply of Fire fighting Equipments Display Boards and First Aid Safty Chart Boards as directed by the Field Engineer.

Supply of LC/Key Board of size 3000 mm length, 1500 mm height made out of 75 X 25 mm Aluminium Frame embeded with 12 mm Prelaminated Wooden Particle Board using Screw on rear 2 Nos Plain Glass of 5 mm thick fixed with Metal Roller moving on Aluminium Channel should be provided on Front with Locking arrangements, Lock with Duplicate Keys. LG Glass piece should be fastened on the Glass Shutters for opening and closing Wall Clamp made out of 6 mm Plate should be provided on as per Drawing along with Hook for Keys with Token and as directed by the Field Engineer including cost of all Materials.

Supply of CCTV Cameras of reputed make with high resolutions (704 x 480) for Day and Night Monitoring of the entire Switch Yard Area of size 200 x 120 m with 2000 m, Necessary connecting Cables including One Number Digital Video Recorder of reputed make with multiple Port of 24 way with all accessories & Two Numbers LED TV of reputed make of size 42" for monitoring of CCTV Cameras with 15 Days Storage Capacity.

LT Metering Box (Double Compartment)

3 Phase 50- 100 A Static Energy Meter, 0.2 Accuracy

DSLP (Direct Stroke Lightning Protection) for Control Room and Switch Yard

Supply of Solar Panels on top of Control room

Description of Work / Item(s)

Amount

I. Erection of Auto Transformer & Station Transformer

Assembling, Erection, Testing and Commissioning of 100 MVA, 230/110 KV Auto Transformers with complete accessories

Erection, Testing and Commissioning of Nitrogen Injection Fire Protection Systems for 100 MVA, 230/110 KV Auto Transformers with complete accessories including Ar. FRLS Cables wherever required and complying CBIP Standards

Erection, Testing and commissioning of 250 KVA DG Set complete Set with all accessories and Protections Outdoor type, Protection Relay Panel, Extension of exhaust Pipe with suitable size and quality MS Pipe upto building outside through silencer and properly insulating with suitable thermal insulating Materials, Plinth concreting, Erection of AMF Panel with Battery Set, Control and Power Cable laying including all Consumables and Commissioning and DG Room at First Floor Level, Steps leading to DG Set provided with Hand Rails.

Erection of Station Transformer, 250 KVA, 22 KV/433 V Station Transformer with 22 KV HG Fuse Sets, 22 KV LAs - 6 Nos, Structure Materials complete Set, 2 Nos 4 Way FRP Pillar Box, 22 KV Isolators 2 Nos with 22 kV Outdoor PT - 2 Nos (2 Core) with junction Box for Terminal connection, Insulators, all Consumables, Cables and all accessories for Station Transformer

II. Erection of Equipments

Erection of 245 KV, 2000 A, 50 KA/3 Sec, Outdoor SF6 Breaker with all accessories and Support Structure

Erection of 145 KV, 2000 A, 40 KA/3 Sec, Outdoor SF6 Breaker with all accessories and Support Structure

Erection of 245 KV, 2000 A, 63 KA, 5 Core, Single Phase Current Transformer with Support Structure, JB and all accesssories (1 No Junction Box for 3 CTs)

Erection of 110 KV, 2000 A, 40 KA, 5 Core, Single Phase Current Transformer with Support Structure, JB and all accesssories (1 No Junction Box for 3 CTs)

Erection of 230 KV Outdoor 3 Core, Single Phase Line Voltage Transformers (LVT), 0.2S & PS, 230KV/√3 / 110V/√3-110V/√3-110V/√3 with Support Structure, JB and all accessories (1 No Junction Box for 3 LVTs)

Erection of 230 KV Outdoor 3 Core, Single Phase Potential Transformers (PT), 0.2S & PS, 230KV/√3 / 110V/√3-110V/√3-110V/√3 with Support Structure, JB and all accessories (1 No Junction Box for 3 PTs)

Erection of 110 KV Outdoor 3 Core, Single Phase Line Voltage Transformers (LVT), 0.2S & PS, 230KV/√3 / 110V/√3-110V/√3-110V/√3 with Support Structure, JB and all accessories (1 No Junction Box for 3 LVTs)

Erection of 110 KV Outdoor 3 Core, Single Phase Potential Transformers (PT), 0.2S & PS, 230KV/√3 / 110V/√3-110V/√3-110V/√3 with Support Structure, JB and all accessories (1 No Junction Box for 3 PTs)

Erection of 230 KV Lightning Arrester with Support Structure

Erection of 110 KV Lightning arrester with Support Structure

Erection of 245 KV, 2000 A, 40 KA Isolator with Earth Switch (Motor operated) with Insulator and Support Structure.

Erection of 245 KV, 2000 A, 40 KA Isolator without Earth Switch (Motor operated) with Insulator and Support Structure.

Erection of 245 KV, 2000 A, 40 KA Isolator without Earth Switch (Motor operated) Insulator, with out Support Structure (Top Mounted By pass Switch) including Gear Arrangement

Erection of 245 KV, 2000A, 40 KA Bus Earth Switch (Motor operated) with Insulator and Support Structure.

Erection of 145 KV, 2000 A, 40 KA Isolator with Earth Switch (Motor operated) with Insulator and Support Structure Motor operated

Erection of 145 KV, 2000 A, 40 KA Isolator without Earth Switch (Motor operated) with Insulator and Support Structure motor operated

Erection of 145 KV, 2000A, 40 KA Bus Earth Switch (Motor operated) with Insulator and Support Structure.

Erection of 230 KV Bus Post Insulator with Support Structure with 230 KV Solid Core Insulators

Erection of 110 KV Bus Post Insulator with Support Structure with 110 KV Solid Core Insulators

III. Erection of Battery, Battery Chargers & Power Room Accessories

Labour for Erection of 220 V, 300 Amphere Hour (AH) Battery (Transparent SAN Container) complete Set including two coats of painting of Acid proof paint on wooden stand and neatly stacking the Battery Cells and fixing of connecting Plates.

Labour, Consumables for the Initial filling and First charging of the 220 V, 300 Amphere Hour (AH) Battery (Transparent SAN Container) complete Set to the required mAH input and there after atleast 3 cycles of Charge/Discharge of the Battery Set till the Battery is charged to its full capacity as directed by the Field Engineer along with Tools for charging of Battery

Erection of 220 V DC, 60 Amps Battery Charger with Potential Free Contacts for all indications for SAS Interface.

Labour for Erection of 48 V, 400 Amphere Hour (AH) Battery (Transparent SAN Container) complete Set including two coats of painting of Acid proof paint on wooden stand and neatly stacking the battery cells and fixing of connecting Plates.

Labour, Consumables for the Initial filling and First charging of the 48 V, 400 Amphere Hour (AH) Battery (Transparent SAN Container) complete Set to the required mAH input and there after atleast 3 cycles of Charge/Discharge of the Battery Set till the Battery is charged to its full capacity as directed by the Field Engineer along with Tools for charging of Battery

Erection of 48 V, DC, 80 Amps Battery charger with Potential Free Contacts for all indications for SAS Interface.

Erection of 220 V DC Distribution Panel with DC Fail Alarm provision and as per Field Requirement

Erection of 48 V DC Distribution Panel with DC Fail Alarm provision and as per Field Requirement

Erection of AC Distribution Panel with Two incomer - As per Field Requirement

Erection of 400 A AC Change Over Switch

Erection of 60 A DC Change Over Switch with Bypass arrangement as per Field Requirement

Erection of 80 A DC Change Over Switch with Bypass arrangement as per Field Requirement

IV. Erection of CRP and SAS Panels & Communication Items

Labour for erection of aII Simplex Indoor/Outdoor Panels/ SAS Field Interface Panels, ACJB (FRP), DCIB (FRP) including Supply & Fabrication of MS Flat 65 X 10 mm for mounting arrangement and earthing of Panel including Hardwaresetc.,

Erection of Armoured Fibre Optic Cable along with all the accessories for connectivity between Outdoor SAS Process Interface Panels and Control & Protection Panels, Digital Substation Automation System and Wherever Required

Erection, Testing & Commissioning of Sub-Station Automation System (For 20 Nos Bays comprising 7 Nos 230 KV Bays, 7 Nos 110 KV Bays) Including 4 Nos 110 KV Future Bays - 220 V DC Control

Erection, Testing & Commissioning of Optical Line Terminal Equipments Hybrid type with Cross connect Multiplexor

Erection of Digital Protection Coupler with complete accessories including Remote End SS (8 Command) Main/Stand alone

Erection of Hybrid EPAX (16S/16T) (Analog + Digital + VOIP System) with Complete Accessories

Erection of Telephone Cable (4 Pair- 5 Nos,each with 500 m)

Erection of Telephone

V. Erection of Control and Power Cables with Glands, Tag and other Accessories

Labour for erection of Cable in Duct/Trench - Neat laying in the ducts with Identification Aluminium tags in all duct corners for easy Identification of Cables, including fabrication of Clamps and fixing at uniform intervals as directed by the Field Engineer - Upto 8 Core

Labour for erection of Cable in Duct/Trench - Neat laying in the ducts with Identification Aluminium tags in all duct corners for easy Identification of Cables, including fabrication of Clamps and fixing at uniform intervals as directed by the Field Engineer - Above 8 Core

Labour for laying of Cable up to 8 Core & Clamping on Structure inluding neat dressing with Identification Aluminium tags etc.,

Labour for laying of Cable above 8 core & Clamping on Structure including neat dressing with Identification Aluminium tags etc.,

Labour for erection 19 mm Cable Glands by providing required No of holes in the Gland plate/ Panels and mechanism/ Control cubical, removing the Cable sheeths, cutting of armour to the required length and makingup the Cable with Gland and fixing the Cable with Gland in the required location.

Labour for erection 22 mm Cable Glands by providing required No of holes in the Gland plate/ Panels and mechanism/ Control cubical, removing the Cable sheeths, cutting of armour to the required length and makingup the Cable with Gland and fixing the Cable with Gland in the required location.

Labour for erection 25 mm Cable Glands by providing required No of holes in the Gland plate/ Panels and mechanism/ Control cubical, removing the Cable sheeths, cutting of armour to the required length and makingup the Cable with Gland and fixing the Cable with Gland in the required location.

Labour for erection 28 mm Cable Glands by providing required No of holes in the Gland plate/ Panels and mechanism/ Control cubical, removing the Cable sheeths, cutting of armour to the required length and makingup the Cable with Gland and fixing the Cable with Gland in the required location.

Labour for erection 32 mm Cable Glands by providing required No of holes in the Gland plate/ Panels and mechanism/ Control cubical, removing the Cable sheeths, cutting of armour to the required length and makingup the Cable with Gland and fixing the Cable with Gland in the required location.

Labour for erection 35 mm Cable Glands by providing required No of holes in the Gland plate/ Panels and mechanism/ Control cubical, removing the Cable sheeths, cutting of armour to the required length and makingup the Cable with Gland and fixing the Cable with Gland in the required location.

Labour for erection 50 mm Cable Glands by providing required No of holes in the Gland plate/ Panels and mechanism/ Control cubical, removing the Cable sheeths, cutting of armour to the required length and makingup the Cable with Gland and fixing the Cable with Gland in the required location.

Labour Charges for Cable Core End Termination.

Erection of GI Ladder type Cable Tray 2.5 m Length, 0.450 m Width and 2 mm thickness with coupling Plate and Bolt Nuts

Erection of GI Ladder type Cable Tray 2.5 m Length, 0.300 m Width and 2 mm thickness with coupling Plate and Bolt Nuts

Erection of GI Ladder type Cable Tray 2.5 m Length, 0.150 m Width and 2 mm thickness with coupling Plate and Bolt Nuts

VI. Erection of Earthing System

Providing Earth Pit of 115 mm dia to a depth of 6 m, labour for fabrication of Earth Electrode using M.S.Rod 40 mm dia & insert Electrode in to the bore and refilling with Red Soil and Bentonite Powder of 30 Kg and other sundries. Identification Board of size 300 X 150 mm 14 SWG. lettering and 12 mm M.S.Round Rod to be fixed in the Board and Anti Corrocive black Paint should be Painted top of the Earth Rod & its holding portion as directed by the Field Engineer as per DRG No: TR/GCC/CBE/ 230-110-33-22-11-EP/044

Labour Machineries, Consumables for erection of Earth Mat & Earth Raisers. (Electricity Supply will be brone by Department)

Labour for excavation & refilling of trunch of avg.width of 0.3 m & avg depth of 0.8 m for earth mat below fixed yard level

Labour, Machineries, Consumables for Earth Raisers for Equipments and Structures. (Electricity Supply will be brone by Department)

Labour Machineries, Consumables for fabrication & erection of Earth Spikes without Materials including sharpening of Top portion & Galvanising, welding & Clipping the Earthwire to Earthmat/EarthPit

VII. Erection of Strung Bus & Bus arrangements

Erection of 230 KV Strung Bus Labour for Strining of Strung Bus including Hoisting of Iron, Insulator and erection of Eye Bolt and Hardware Fittings (1 Span, 6 Run)

Erection of 110 KV Strung Bus Labour for Strining of Strung Bus including Hoisting of Iron, Insulator and erection of Eye Bolt and Hardware Fittings (1 Span, 6 Run)

Labour for Erection of 75 mm IPS Aluminium Tube Bus Bar with out making bends with appropriate machineries and consumables

Labour for Erection of 50 mm IPS Aluminium Tube Bus Bar with out making bends with appropriate machineries and consumables

Labour for providing Droppers and Jumpers Up to Height of 6 m

Labour for providing Droppers and Jumpers Up to Height of 6 m to 10 m

Labour for providing Droppers and Jumpers above a Height of 10 m

Labour for Erection of 230 KV Insulators Double Pole Stack Under Hang or Suspension

Labour for Erection of 110 KV Insulators Single Pole Stack Under Hang or Suspension

VIII. Erection of Station Accessories

Erection of Rubber Mat 2000 x 1000 x 10 mm

Erection of GI Checkered Plate 6 mm thick for Control Room Cable Duct Cover including Cutting labour

Erection of Flexible Copper Tape/Rope, Flexible braided Copper for interlinking Panel Earthing and for providing connectivity whereever necessary/other purpose as directed by the Field Engineer

Erection, Testing of Illumination for Switch Yard, Light Master Tower and Tubular Pole as per Specification and Design including all Materials, AC JB, DBs and Consumables using LED Technology for arriving lux 30

Erection of Double Fitting LED Pole 6 & 8 metre and Laying of Cable inside the Pole including testing for burning condition.

Labour for erection of Yard Light Box including fabrication of Clamping arrangements

Labour, Machineries, Consumables for Fabrication of Light Section with joints wherever necessary (Sectional Weight below 14 Kg /m)

Labour for the Erection of the Fabricated Steel Structures Heavy section (below 14 kg/m )

Labour charges for One Primary coat of Red Oxide Painting of various Structures after proper surface preparation using approppriate Machinery to remove Rust/Scales etc.,

Labour charges for Two coat of Aluminium Painting of various Structures after proper surface preparation using approppriate Machinery to remove Rust/Scales etc.,

Labour charges for One coat Enamal Painting / Anti Corrosive Painting of chequrred plates, Equipment Board, Identification of Earth Pit Board and Yard Light Pole, Structure Earthing, Earth Mat, Earth Pit, shoe Paint of Iron & Steel items after proper surface preparation using approppriate Machinery to remove Rust/Scales etc., as directed by the Field Engineer.

Labour Only for Painting of Second Finish Coat of all Sections

Fixing of Reflector Sticker of reputed make for Colour coding of all Equipments and Structures and any other Details of Breakers, Panels, chargers and General Key Boards as required and as directed by Field Engineer,

IX. Erection of Fire Fighting Equipements

50 Litre Trolley mounted Foam type Fire Extinguisher

9 Litre Portable Foam type Fire Extinguisher

25 Kg Trolley Mounted DCP Type Fire Extinguisher

9 OR 10 Kg DCP Type Fire Extinguisher

5 OR 6 Kg DCP Type Fire Extinguisher

Erection of Fire Protection Alarm System for Control Room and Cable Gallery

Erection of LC/Key Board of size 3000 mm, length 1500 mm height made out of 75 x 25 mm aluminium frame embeded with 12 mm prelaminated wooden Board removable with moving Glass Shutter of 5 mm thick, locking arrangements Lock with Duplicate Keys, Wall Clamps, Key Hooks and Drawing for Electrical Layout and details as directed by the Field Engineer including cost of all Materials.

Erection of CCTV Cameras of reputed make with high resolutions (704 x 480) for Day and Night Monitoring of the entire Switch yard area of size 200 x 90 m with 2000 m, Necessary connecting Cables including One Number Digital Video Recorder of reputed make with multiple Port of 24 way with all accessories & Two Numbers LED TV of reputed make of size 42" for monitoring of CCTV Cameras with 15 days Storage capacity.

LT Metering Box (Double Compartment)

DSLP (Direct Stroke Lightning Protection) for Control room and Switch yard

X. Items of Dismantling at Existing Poolavady 110/22 KV SS

Lobur for Dismantling of 110 KV Take Off / Strung Bus Structure (Note:- 20 % Extra Rate for LC Work for Labour only)

Labour for Dismantling of 110 KV AB Switch Structure for Main Bus (Note:- 20 % Extra Rate for LC Work for Labour only)

Labour for Dismantling of 110 KV Isolator With Earth Blades, Hand operated including Dismantling of Insulators and other works etc., (Note:- 20 % Extra Rate for LC Work for Labour only)

Labour for Dismantling of 110 KV Isolator With out Earth Blades, Hand operated including Dismantling of Insulators and other works etc., (Note:- 20 % Extra Rate for LC Work for Labour only)

Dismantling of 110 KV Bus Bar Support Structure Bus (Note:- 20 % Extra Rate for LC Work for Labour only)

Labour for Dismantling of 75 mm IPS Aluminium Tube Bus Bar Without making Bends. (Note:- 20 % Extra Rate for LC Work for Labour only)

Labour for Dismantling of 110 KV Single Zebra ACSR Conductor (1 Span 3 Run) Strung Bus - Labour for Un Strining of Strung Bus including dismantling of Insulators. (Note:- 20 % Extra Rate for LC Work for Labour only)

Labour for Dismantling of Droppers and jumpers of Upto height of 6 m to 10 m from ground level. (Note:- 20 % Extra Rate for LC Work for Labour only)

Labour for Dismantling of 110 KV Single/Double Pole Stack Up right, Underhang or Suspension. (Note:- 20 % Extra Rate for LC Work for Labour only)

ESHSCost Schedule

Resources allocated to ESHS management

Drafting and updating the ESHS documentation, reporting, inspections

Implementation of the Health and Safety Plan: Meetings, health care centre, medical check ups, emergencies and evacuations, safety protective equipment, hygiene

Accommodation, drinking water, meals and transportation of staff(*) (*) : The Bidder shall detail the financial conditions of the supply of accommodation, meals and transport to its staff:  Accommodation  Meals  Transport

Training and local recruitment management costs

Protection of adjacent areas, biodiversity,prevention of erosion and wastewater management

Traffic, noise and atmospheric emissions management, land take

Waste and hazardous products management

Vegetation clearing and site rehabilitation

Erection of Solar Panels on top of Control room