Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹7.5 LAccepted-AOC | 1 | Accepted-AOC L1 | |
| 2 | 2₹7.8 L+₹31,000 (4.14%)Rejected-Finance 638 111 | TIRUPPUR | TAMIL NADU | 638111 | 2 | Rejected-Finance L2 |
| Sl No | Description | Qty | Unit | SG CONSTRUCTIONS L1 | SUBBIAH NAICKER SUBBIAH L2 |
|---|---|---|---|---|---|
| 1.00 | Supplying and fixing in position of Alu. Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90 cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12 mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass with necessary glassing clips.rubber beading, etc., including necessary dismantling holes in RCC columns, beams masonry wherever necessary with power power drill ti the extent required and made good to the original conditions after fixing as directed by the departmental officers. All the Aluminium sections should be anodised to 1.5microns as per ISI specification 1868/1962. | 49 | m2 | 3,815 ₹1,86,935 Lowest | 4,145 ₹2,03,105 |
| 2.00 | Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections. | 6 | m2 | 8,406 ₹50,436 Lowest | 9,133 ₹54,798 |
| 3.00 | Supplying and fixing in position best quality approved make colour glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications | 4 | No | 4,586 ₹18,344 Lowest | 4,983 ₹19,932 |
| 4.00 | Wiringwith2x1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessorieswith150mmx100mmx113mmTWswitchboxinflushwithwallwith3mmthickhylemsheetcoverfor5A3pinnoninterlockingwallsocketwith5Aflushtypeswitchwithpaintingofsuitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point | 10 | No | 1,248 ₹12,480 Lowest | 1,356 ₹13,560 |
| 5.00 | Labour Charges for erection of Urinals including all cost of labour etc., complete as per standard specification | 2 | No | 1,434 ₹2,868 Lowest | 1,559 ₹3,118 |
| 6.00 | Supplying and fixing the 5 star rated (Carrier/ Voltas /"O" General or equivalent) Split A/C machines of 2.00 tons capacity of ISI make with Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay, Supply and fixing of MS stand for fixing outdoor unit, Supply and fixing of 3m length water drain pipe line (1” PVC Pipe) and all other necessary accessories as instructed by the Departmental officers etc complete as per standard specifications | 2 | No | 61,514 ₹1,23,028 Lowest | 66,829 ₹1,33,658 |
| 7.00 | Labour Charges for erection of Old AC inclding all cost of labour etc., complete as per standard specification | 10 | No | 4,600 ₹46,000 Lowest | 4,997 ₹49,970 |
| 8.00 | Supply and Fixing of Name Board Sticker including cost of material, conveyance and all labour charges etc., complete as per standard specification | 3 | No | 360 ₹1,080 Lowest | 391 ₹1,173 |
| 9.00 | Supply and Fixing of Cash Locker including cost of material, conveyance and all labour charges etc., complete as per standard specification | 1 | No | 8,600 ₹8,600 Lowest | 9,343 ₹9,343 |
| 10.00 | Wiring with 3 x 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V grade in suitable PVC cabin casing pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable Colourfor open PVC Light point(Sd 20) | 10 | No | 1,370 ₹13,700 Lowest | 1,488 ₹14,880 |
Tender Value
₹7.5 L
EMD Value
₹7,500
Closing Date
27 Nov 2025, 3:00 pmClosed
COMMISSIONER KANGEYAM MUNICIPALITY
KANGEYAM MUNICIPALITY
Additional Works at New Municipal office Building in Kangeyam Municipality
2025_MAWS_626022_1
1165-2/2025/E1
Open Tender
Civil Works - Buildings
Works
60 days
KANGEYAM MUNICIPAL AREAS
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹7,500
27 Jan 2026
24 Nov 2025
27 Nov 2025
24 Nov 2025
27 Nov 2025
24 Nov 2025
Amount
Supplying and fixing in position of Alu. Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90 cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12 mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass with necessary glassing clips.rubber beading, etc., including necessary dismantling holes in RCC columns, beams masonry wherever necessary with power power drill ti the extent required and made good to the original conditions after fixing as directed by the departmental officers. All the Aluminium sections should be anodised to 1.5microns as per ISI specification 1868/1962.
Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.
Supplying and fixing in position best quality approved make colour glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications
Wiringwith2x1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessorieswith150mmx100mmx113mmTWswitchboxinflushwithwallwith3mmthickhylemsheetcoverfor5A3pinnoninterlockingwallsocketwith5Aflushtypeswitchwithpaintingofsuitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point
Labour Charges for erection of Urinals including all cost of labour etc., complete as per standard specification
Supplying and fixing the 5 star rated (Carrier/ Voltas /"O" General or equivalent) Split A/C machines of 2.00 tons capacity of ISI make with Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay, Supply and fixing of MS stand for fixing outdoor unit, Supply and fixing of 3m length water drain pipe line (1” PVC Pipe) and all other necessary accessories as instructed by the Departmental officers etc complete as per standard specifications
Labour Charges for erection of Old AC inclding all cost of labour etc., complete as per standard specification
Supply and Fixing of Name Board Sticker including cost of material, conveyance and all labour charges etc., complete as per standard specification
Supply and Fixing of Cash Locker including cost of material, conveyance and all labour charges etc., complete as per standard specification
Wiring with 3 x 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V grade in suitable PVC cabin casing pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable Colourfor open PVC Light point(Sd 20)
Labour Charges for erection of Fan including all cost of labour etc., complete as per standard specification
Supply and fixing of single box type 4'40W tube light complete with copper choke and condensor, with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with tube (SD - 88)
Supply and Fixing of Hydraulic Door Closure including cost of material, conveyance and all labour charges etc., complete as per standard specification
Supply and Fixing of Vertical Blind including cost of material, conveyance and all labour charges etc., complete as per standard specification.
Supply and Fixing of Cooling Sticker for Glass including cost of labour, conveyance and all labour charges etc., complete as per standard specification
Supply and fixing of trusses using necessary 'L' angels and I section each according to design approved by the departmetal officers including cutting, welding cost and conveyance of all materials to site and all labor charges etc., complete as per standard specification
Supply and Fixing of 5000 Litre HDPE Tank including cost of labour, conveyance and all labour charges etc., complete as per standard specification
SUBBIAH NAICKER SUBBIAH (BID ID -1521921)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_748579.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.04 MB
BOQ_748579.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .