CONSTRUCTION OF 3KLD CAPACITY FAECAL SLUDGE TREATEMENT PLANT IN LAKSHMIPURA GRAM PANCHAYAT BALLUR VILLAGE OF SALIGRAMA TALUK

Detailed Project Report for construction of 3 KLD FSTP at Ballur Village in Laxmipura GP of Saligrama Taluk.

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations

and other similar works etc. in layers not exceeding 20cm in depth, consolidating

each deposited layer by ramming and ...

Providing and Filling in foundation with granite / trap broken metal 100mm. and

down size & with approved sand including hand packing, ramming, watering,

including cost of all materials and labour wit...

Providing Size Stone masonry with hard stone in foundation & plinth with

Cement mortar 1:6 (1 cement : 6 coarse sand) complete with all lead and lifts and as directed by the engineer in charge.

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for levelling course for

all works in foundation. The granite/trap/basalt crushed graded coarse

aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works.

The granite/trap/basalt crushed graded coarse aggregates and fine aggregates

as per relevant IS Codes machine mixed with supe...

Extra for Providing and mixing water proofing material in cement plaster work in proportin recommended by the manfacturers including cost of materials etc as per specifications and as per directions ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement

including cost of all materials, machinery, labour, cleaning, straightening,

cutting, bending, hooking, laping/welding joints, tyin...

Providing and removing centering, Shuttering , strutting, propping etc.,, and removal of form work for foundations, footings, bases of columns for mask concrete including cost of all materials, labour...

Providing and removing centering, Shuttering , strutting, propping etc.,, and removal of form work for foundations, footings, bases of columns for mask concrete including cost of all materials, labour...

Providing and removing centering, Shuttering , strutting, propping etc.,, and removal of form work for foundations, footings, bases of columns for mask concrete including cost of all materials, labour...

Providing and removing centering, Shuttering , strutting, propping etc.,, and removal of form work for foundations, footings, bases of columns for mask concrete including cost of all materials, labour...

Providing and removing centering, Shuttering , strutting, propping etc.,, and removal of form work for foundations, footings, bases of columns for mask concrete including cost of all materials, labour...

Providing and removing centering, Shuttering , strutting, propping etc.,, and removal of form work for foundations, footings, bases of columns for mask concrete including cost of all materials, labour...

Providing and removing centering, Shuttering , strutting, propping etc.,, and removal of form work for foundations, footings, bases of columns for mask concrete including cost of all materials, labour...

Providing and constructing load bearing wall with Solid Concrete blocks

of size 400x150x200mm having block density more than 1800kg/m3

and minimum compressive strength of 4.00 N/mm2 conforming to IS

Providing and constructing load bearing wall with Solid Concrete blocks

of size 400x100x200mm having block density more than 1800kg/m3

and minimum compressive strength of 4.00 N/mm2 conforming to IS

Providing Brick work with common burnt clay modular bricks of class

designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement

: 4 coarse sand) including cost of all materials, labour, sc...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to

brick/stone masonry including rounding off corners wherever required

smooth rendering, providing and removing scaffolding, includi...

Providing 12 mm cement plaster finished with a floating coat of neat

cement of mix :1:4 (1 cement: 4 fine sand) to brick masonry including

rounding off corners wherever required smooth rendering, prov...

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to

brick/stone masonry including rounding off corners wherever required

smooth rendering, providing and removing scaffolding, includi...

Providing 15 mm cement plaster on the rough side of single or half brick

wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners

wherever required smooth rendering, providing and remov...

Extra for Providing and mixing water proofing material in cement plaster work in proportin recommended by the manfacturers including cost of materials etc as per specifications and as per directions ...

Providing Cement mortar 1:2 (1 cement : 2 fine sand) including cost of all

materials, labour and usage charges of machinery complete as per the direction

of engineer incharge of work

Painting with synthetic enamel paint of approved brand and

manufacture of required colour to give an even shade :Two coats on new

work over an under coat of suitable shade with ordinary paint of appro...

Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade :Two coats on new work after

thoroughly brooming the surface to remove all dirt, dust, mortar drops

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest

amendments and conveying to worksite, rolling and lowering into

trenches, laying true to line and level and perfect linking at joint...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest

amendments and conveying to worksite, rolling and lowering into

trenches, laying true to line and level and perfect linking at joint...

Supply and delivery at site special moulded variety PVC tee as per IS

7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its

latest amendments 110 mm dia PVC Tee complete with all lead a...

Supply and delivery at site special moulded variety PVC elbows as per

IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with

its latest amendments 110 mm dia PVC Elbows complete with all ...

Supply and delivery at site special moulded variety PVC tee as per IS

7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its

latest amendments 160 mm dia PVC Tee complete with all lead a...

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest

amendments and conveying to worksite, rolling and lowering into

trenches, laying true to line and level and perfect linking at joint...

Supply and delivery at site special moulded variety PVC elbows as per

IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with

its latest amendments 50 mm dia PVC Elbows complete with all l...

110mm dia Perforated Pipe complete with all lead and lifts and as directed by the engineer in charge.

Providing and laying of coarse aggregate size as below after washing & sieving to

make it free from fines & dust. 120 mm nominal size (at center) complete with all lead and lifts and as directed by t...

Providing and laying of coarse aggregate size as below after washing & sieving to

make it free from fines & dust.20 mm nominl size complete with all lead and lifts and as directed by the engineer in ...

Providing and laying of coarse aggregate size as below after washing & sieving to

make it free from fines & dust.53 mm nominl size complete with all lead and lifts and as directed by the engineer in ...

Providing and laying of coarse aggregate size as below after washing & sieving to

make it free from fines & dust.20 mm nominl size complete with all lead and lifts and as directed by the engineer in ...

Providing and laying of coarse aggregate size as below after washing and sieving to

make it free from fines & dust.6 mm nominl size complete with all lead and lifts and as directed by the engineer in...

Providing and laying of coarse aggregate size as below after washing & sieving to

make it free from fines & dust.Sand/Artificial Sand/Manufactured Sand (0.75 to 4.75mm complete with all lead and lift...

Providing and laying of coarse aggregate size as below after washing & sieving to

make it free from fines & dust.Cinder complete with all lead and lifts and as directed by the engineer in charge.

Supplying/Casting and fixing Precast Reinforced Cement Concrete perforated slabs (2"

dia hole) of following thickness in RCC 1:2:4, using following HBGS jelly including cost

of reinforcement steel in ...

Precast Concrete Cover 600 mm x 600 mm x 50 mm complete with all lead and lifts and as directed by the engineer in charge.

Precast Concrete Cover Maintenance covers 700 mm x 700 mm x 50 mm complete with all lead and lifts and as directed by the engineer in charge.

Precast Concrete Cover Perforated slabs 735mm X 535mm X 50mm complete with all lead and lifts and as directed by the engineer in charge.

Precast Concrete Cover For 1.50m dia (clear) rings of steining thickness 0.075mm upto 18 M depth complete with all lead and lifts and as directed by the engineer in charge.

Precast Concrete Cover 1650mm dia (top slab) complete with all lead and lifts and as directed by the engineer in charge.

Granular Sub-base - Grading III Construction of Granular Sub-Base by Mix in Place Method

by providing well graded Gravel, spreading in uniform

layers with motor grader on prepared surface, mixing by

Providing and laying 60mm thick factory made cement concrete paver

block of approved shape and colour of M -30 grade made of C&D waste

by block making machine with vibratory compaction laid in require...

Providing and constructing dry rubble stone pitching with pin

headers at 2 per m2 using stones and stone chips from approved source

including cost of all materials, labour, hand packing / wedging ston...

Supplying and fixing M15 grade precast cement concrete Kerb

stones for Roadway, Sidewalls and gutters fixed with CM 1:3

fixed and finsihed in line as per direction of Engineer in charge.

(The cost of ...

Supply and delivery of Centrifugal pumpset at site brand new best

make and with discharge duty confirming to ISI standards and its latest

amendments. HP, Size 65x50 Head 13M, Discharge 462 LPM comple...

Loading and unloading of Polythene Bagged Seedlings Loading of polythene-bagged seedlings in tothevehicleatthe nursery site and unloading atthesitenearesttothe planting site Seedlings raised in 14 inc...

Transportation Transportation of polythene-bagged seedlings in hired truck from the nursery site to planting site Seedlings raised in 14 inch x 20 inch size bags i Distance up to 10 Km. complete with...

Conveyance Conveyance of polybagged seedlings on head load from the dumping site to planting location near each trench/pits(distance upto 3km 14 inch x 20 inch size bagged seedlings complete with all...

Planting Planting of P.B. Seedlings after tearing with blade & removing the polythene bags in trenches / pits including scooping the soil to required depth, pressing the soil gently around the seedlin...

Providing and fixing Steel work in built up tubular (round, square or

rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,

fixing in position and applying a priming coat of approv...

Providing and fixing precoated galvanised iron profile sheets (size, shape

and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+

0.05 percentage) total coated thickness with zinc coat...

Providing and fixing precoated galvanised steel sheet roofing accessories

0.50 mm (+0.05 Percentage) total coated thickness, Zinc coating 120 g/m2 as per

IS 277, in 240 mpa steel grade, 5-7 microns ep...

Providing & fixing 455x610 mm cast iron cover with frame weight to be

not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and

necessary locking arrangements with M.S flats 32x6 mm etc & ...

Providing and laying vitrified floor tiles with thickness 9-10 mm in

different sizes with water absorption less than 0.08% and conforming to

IS: 15622, of approved make, in all colours and shades, lai...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm

thick on 10mm thick cement plaster 1 3 and jointed with white cement

slurry over existing rough plaster surface using glazed t...

Providing and fixing double glazed hermetically sealed glazing in aluminium

windows, ventilators and partition etc. with 6 mm thick clear float

glass both side, having 12 mm air gap, including providi...

Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to openi...

Providing and fixing water closet squatting pan (Indian type W.C. pan )

with 100 mm sand cast Iron P or S trap, 10 litre low level white

P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing white vitreous china flat back or wall corner type

lipped front urinal basin of 430x260x350 mm and 340x410x265 mm

sizes respectively with automatic flushing cistern with standard ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the w...

Providing and fixing brass bib cock of approved quality 20 mm nominal bore complete with all lead and lifts and as directed by the engineer in charge.

Providing and fixing 100 mm sand cast Iron grating for gully trap complete with all lead and lifts and as directed by the engineer in charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe wi...

Providing and placing on terrace (at all floor levels) polyethylene

water storage tank, IS 12701 marked, with cover and suitable locking

arrangement and making necessary holes for inlet, outlet and ov...

Supplying and fixing regular MCCB distribution Panel

confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43

protection provided with Polyurethane (PUR) gasket, with suita...

Supplying and fixing superior quality modular switch mounting polycarbonate plate

with necessary supporting back plate with required nos. of machine screws, bolts nuts

etc., complete on the existing m...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards

using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3

with Short circuit breaking ca...

Point wiring using Copper wire with switch. Supplying and wiring adopting loop

system in existing PVC Conduit/ casing capping using 1100V grade, COPPER conductor

flexible multistrand FRLS PVC insulate...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade,

multistrand Copper with low conductor resistance single core wire in open or

concealed system of wiring with specified IS...

Supplying of feet - PVC Batten with integrated LED tube W with high quality

diffuse with Life of 25000 burning hours & 70Percentage lumen maintenance with CRI 80.

Power Input: 220-240V at 50/60Hz and...

Providing and fixing G.I. chain link fabric fencing of required width in mesh

size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with

2 mm dia wire or nuts, bolts and washers as requi...

Supplying at site Angle iron post & strut of required size including bottom

to be split and bent at right angle in opposite direction for 10 cm length

and drilling holes upto 10 mm dia. etc. complete ...

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6

mm angle iron and 3 mm M.S. gusset plates at the junctions and

corners, all necessary fittings complete, including applying a primi...

PART B- NON SCHEDULED ITEMS Stainless Steel Screen Providing, fabricating,fixing of SS Screens using SS 304 bars, 20 mm spacing of 4 mm

thick with handle (7.5kg) including cost of material, transporta...

End Cap 110 mm dia end Cap