MAINT SERVICES AND CERTAIN REPAIRS AT OTM MD ACCN IN SOS AREA, SPORTS GROUND AND KHERIYAMA AT MIL STN GAYA

Amount

Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 10mm thick in ceiling on brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified and directed.

M&L for rendering 10mm thick internal surfaces on fair faces of brick work or concrete in cm 1:6 as directed by Engr-in-charge.

M&L for rendering 15mm thick external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC 2% by wt of cement complete all as specified and directed.. Note:-WPC measured and paid separatly

Supply only liquid water proofing compound ISI marked complete all as specified and directed.

M&L preparing new/old plastered surfaces of wall/ceiling and applying complete wall with 1.0 mm Wall putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed by Engineer-in-Charge.

Preparing new plastered surfaces and applying Two coats of cement base paint on surfaces of walls over one coat of white wash complete all as specified and directed by engr in charge.

Dismantling stone slab of any description laid beddded & pointed ias specified and directed.

M&L for granite (any type) work (table rubbed and polished) 18 to 20 mm thick in working platform and like including cutting for sink etc. in 20mm thick cement mortar (1:4) including rounding of edges and pointing in white cement (1:2) using marble dust with admixture of pigment to match.complete all as specified and as directed

Demolition of Concrete in ground floors and pavings including floor tiles n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for 25 mm thick PCC 1:2:4 (20mm graded aggregate ) in levelling course of floor complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc. complete all as specified and directed by engr in charge. Notes : Shade of the tile including colour, design and pattern shall be approved by AGE.

S&F light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles n.exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed be in C:M 1:4 complete all as specified and directed by engr in charge complete all as specified and directed by engr in charge. Notes : Shade of the tile including colour, design and pattern shall be approved by AGE

M&L for glazed ceramic coloured tiles in verticle surface 450mmx350mmx7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat 10mm thick cement mortar in 1:4 complete all as specified and directed by engr in charge. Notes : Shade of the tile including colour, design and pattern shall be approved by AGE.

M & L Machine cut Kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including screed bed or bedding layer of mortar 20 mm thick Cement Mortar 1:6 complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L RCC type B-1, 1:2:4 (using 20 mm graded stone aggregate) in chajjas complete all as specified and directed.

M & L for TMT bars 8 mm dia & over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

S & F for Formwork fair finished Falt surface to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed.

M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls of 75 mm bore of pipe etc complete all as specified and directed

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed

PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and directed.

PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement complete all as specified and directed.

S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15 mm dia bore pillar taps cast copper alloy, with capstan head, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15 mm dia stop valves/angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S & F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S &F as in repair chromium plated Shower rose 15 mm size, 125mm long with arms complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper including brackets or fixed to walls with anchor fastners complete all as specified and directed by Engr-in-charge.

S & F in Repair of Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete all as specified and directed by Engr-in-charge .

S & F of 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed by Engr-in-charge

S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position all as specified and directed by Engr-in-charge.

S&F in repairs aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-charge .

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each complete all as specified and directed by Engr-in-charge

Taking down chowket or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each

Taking down re-fixing Shutters of any description but exc 1 sq. m and n exc 2 sq. m each in same opening including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. Renewal of builder's hardware articles, if specially ordered, shall be paid for at 'supplied only' rates.

M&L for 35mm thick second class hardwood glazed and skelton door shutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-charge

M&L for 30 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sides complete all as specified and directed by Engr-in-charge

S&F 125 mm long Stainless steel butt hinges with steel hinge pin etc complete all as specified and directed by Engr-in-charge.

S&F 200mm long aluminium anodised barrel tower bolt and fixed complete all as specified and directed by Engr-in-charge

S&F 150mm long aluminium anodised handle cast type and fixed D Type complete all as specified and directed by Engr-in-charge

S&F alluminum alloy, anodised, cast type or extruded section, sliding door bolt with hasp & staple (bolt type) with fixing clips and bolts and 300 mm long complete all as specified and directed by Engr-in-charge

S&F Mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-charge

S & F Powder coated aluminium frame/shutters for doors, windows, ventilators sliding/openable etc with joining cleat for fixing, locking arrangement, rubber beading, screws, etc including taking down and making the surface good complete all as specified and directed by Engr-in-charge Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

Supply only Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed by Engr-in-charge

Supply only 3 mm thick Sheet glass, ordinary quality, in squares exc 0.5 sq. m each pane complete all as specified and directed by Engr-in-charge

Pressed steel frames of size 105x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engr-in-charge

Pressed steel frames of size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed by Engr-in-charge

S & F of Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-charge

M & L two coats of synthetic enamel painting on steel surfaces exc 10 cm width or girth over one coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed by Engr-in-charge

M&L two coat of synthetic enamel paint over old wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-in-charge

M&L two coat of synthetic enamel paint over New wooden surfaces of any description not otherwise described over 10cm in width or grith over one coat of pink primer including preparation of surfaces complete all as specified and directed by Engr-in-charge

S & F solid PVC frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet & edges will be printed to match with prelam sheet reinforced with MS square tube etc complete all as specified and directed by Engr-in-charge

S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame complete all as specified and directed by Engr-in-charge

S&F 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed by Engr-in-charge

S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed by Engr-in-charge

S&F 125mm long aluminium anodised handle cast type and fixed D Type complete all as specified and directed by Engr-in-charge

UMESH SINGH (BID ID -3354303)

M/S AJAY KUMAR SINGH (BID ID -3361953)