Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
Closing Date
8 Jul 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rotary Wing Research & Design Centre
HINDUSTAN AERONAUTICS LIMITED Rotary Wing Research & Design Centre
EXPRESSION OF INTEREST FOR BEARINGS AND SELF LUBRICATED BUSHES FOR ROTARY UNMANNED AERIAL VEHICLE RUAV
7873
RC/IMM/EOI-BRGS-SELFLUB-BUSHES-04/2024
Works
Helicopter Complex -RWRDC
₹0
Exempted
8 Jul 2024
15 Jun 2024
15 Jun 2024
8 Jul 2024
EOI No. RC/IMM/EOI(BRGS-SELFLUB.BUSHES)-04/2024 PART-IG
TAIL ROTOR HUB BALL BEARING (RC/RUAV/RS/TS/OO8)
S/n HAL Specification Vendor Compliance Remarks
Hindustan Aeronautics Limited (HAL), Bangalore, India has undertaken the Design & Development of a 200 Kg class Rotary Unmanned Aerial Vehicle (RUAV). The rotor system of RUAV consists of Main Rotor Blades, Main Rotor Head and Upper Control System and Tail Rotor System. The vendor can either develop or propose off-the-shelf bearing meeting the requirements given in this specification.
2 2.0 Operating and Storage Conditions
2.1. Operating Conditions
The bearings shall be designed to operate without any time limitations and without impairment or change under environmental conditions defined in this specification.
Operating temperature : -30 deg C to +60 deg C : -30 deg C to +60 deg C
Humidity : up to 100% relative humidity
: up to 100% relative humidity
2.2. Storage Conditions
Storage Temperature : -40 deg C to +71 deg C
Humidity : up to 100% relative humidity
2.3. Surface exposure
Rain water, sand & dust and oil/solvent
3 3.0 Applicable Standards
Mil-STD-810G or equivalent Environmental Tests methods
Mil-STD-2073-1E Standard Practice for Military Packaging
Table-1: Applicable Standards
3.1 Environmental Standard Compliance
Vendor to show compliance to Mil-STD-810G or equivalent. The technical report should include a compliance matrix indicating the method, procedure, limits, acceptance and rejection criteria and method of compliance. Compliance is to be provided by actual testing or qualification by similarity or analysis.
S/N Test As per MIL-STD-810G
1 Temperature 501.5,502.5
6 Icing/Deicing fluids 521.3/504.1
Compliance to humidity (507.5) is desirable.
Table-2: Environmental Testing
4 4.0. Ball Bearing-Tail rotor Hub (Part No. 302P 641H 3000 202) :
Figure-1 shows the ball bearing with its nominal dimensions.
Figure-1: Nominal Dimensions of Ball bearing-Tail rotor hub
4.1.1 Bearing Arrangement and Lubrication:
The bearing must be grease packed. The bearing arrangement is as shown in Figure-2. Refer Annexure for remaining details of the bearing.
Figure-2: Bearing Arrangement of Tail rotor hub ball bearing
4.1.2. Load-Motion Spectrum:
The bearing is subjected to a constant rotation of 4012 rpm. The load-motion spectrum for the bearing is as shown in Table-3. Figure-3 shows the axes convention used in the load-motion spectrum.
Py & Pz: Radial Load
4.1.3. Housing and Shaft Details:
The dimensions of the mating surfaces are shown in Table-4. However, the vendor may propose tolerance limits, surface finish details on the mating surfaces for better life and performance.
Material Titanium: Titanium:
Surface Finish: 1.6 microns Surface Finish: 1.6 microns
Table-4: Interface details for Ball Bearing-Tail rotor Hub
4.1.4. Applicable Standards for bearing development:
Relevant and applicable portions of standards (refer latest Issues) listed below in Table-5 shall be considered and satisfied in design, manufacture, testing & certification of the bearings.
MIL-B-3990 Needle roller bearings
MIL-B-8914 Roller bearings
Table-5: Standards for Development of Needle and Roller Bearings
4.1.5. Service Life
The bearing shall have a minimum L10 life of 3000 hours with a TBO of 500 hours
4.1.6 Load Ratings
Static and Dynamic Load Ratings to be provided by the vendor. Justification through Test or Analysis to be provided for the values.
5 5. 0 Qualification Testing
The vendor has to carry out the following checks / tests and submit the test report.
(a) Radial Internal Clearance
(b) Axial Internal Clearance
(c) Radial Run Out Test
(d) Face Out Test
(e) Frictional Torque Test
(f) Static Radial Load Capacity
(g) Ultimate Radial Load Test
(h) Static Axial Load Capacity
(i) Ultimate Axial Load Test
(j) Breaking Load Test for balls
(k) Dimensional Stability Test
(l) Residual Magnetism
(m) Vibration & Mechanical Shock Test
(n) Oil Contamination Test
(o) Endurance Test
Any other test required to qualify a specific type of bearing is to be done by the vendor.
6 6.0 Tests to be done by HAL
Verification of the function / performance and reliability of the bearing will be carried out by HAL through ground test vehicle and prototype helicopters.
7 7.0 Responsibility
Responsibility of design and its approval, testing and certification of bearings, quality control, incorporation of any modification and release of design shall be with the original supplier/vendor. This will also include introduction of modifications and release of service bulletins etc. by the supplier/vendor in concurrence with HAL.
8 8.0 Prior experience
Vendor should have developed/ supplied ball bearings to reputed aerospace industries or organizations across the globe. The supplied components shall be used on aerospace platforms certified by any of the certification agencies like CEMILAC, DGCA, EASA, FAA etc. Details of the executed contracts should be provided to ascertain credentials.
9 9.0 Documents to be provided by vendor
1) Dimensional Controlled drawing for approval of HAL.
2) Vendor has to issue Certificate of Conformance (CoC).
3) Time Between Overhaul(TBO) in operating hours.
4) Total technical life in operating hours.
5) Storage and preservation details.
6) Vendor should provide update on any changes, revision, issue, modification status along with the reasons and support documents such as Modification leaflet/Service Bulletin/Service instruction/Service Letter etc, as applicable without any financial implications to HAL.
7) Stress analysis report
8) Environmental Test/Analysis Reports as per para 3.1
9) Technical Life Report based on load-motion spectrum
10) Technical Report on Load Ratings for each bearing
10 10.0 Technical Assistance and Continued Airworthiness
Vendor to provide for the following:
1) Technical support during prototype integration, whirl tower testing, ground/flight-testing and certification with respect to resolving technical problems, snags/defect/failures observed during operation.
2) Technical support for detailed investigation reports on failure, defects reported during operation.
3) Issues regarding obsolescence and actions to overcome the same to be informed well in advance to HAL for supporting the existing fleet.
4) Vendor shall provide necessary training, authorization and documents with rejection criteria.
5) Any additional documents as required by Indian Certification agencies (CEMILAC & DGAQA)
EOI No. RC/IMM/EOI(BRGS-SELFLUB.BUSHES)-04/2024 PART-IH
TAIL ROTOR PITCH SLIDER (RC/RUAV/RS/TS/009)
HAL Specification Vendor Compliance Remarks
Hindustan Aeronautics Limited (HAL), Bangalore, India has undertaken the Design & Development of a 200 Kg class Rotary Unmanned Aerial Vehicle (RUAV). The rotor system of RUAV consists of Main Rotor Blades, Main Rotor Head and Upper Control System and Tail Rotor System. The vendor can either develop or propose off-the-shelf bearing meeting the requirements given in this specification.
2 Operating and Storage Conditions
2.1. Operating Conditions
The bearings shall be designed to operate without any time limitations and without impairment or change under environmental conditions defined in this specification.
Operating temperature : -30 deg C to +60 deg C
Humidity : up to 100% relative humidity
2.2. Storage Conditions
Storage Temperature : -40 deg C to +71 deg C
Humidity : up to 100% relative humidity
2.3. Surface exposure
Rain water, sand & dust and oil/solvent
3 3.0 Applicable Standards
Mil-STD-810G or equivalent Environmental Tests methods
Mil-STD-2073-1E Standard Practice for Military Packaging
Table-1: Applicable Standards
3.1 Environmental Standard Compliance
Vendor to show compliance to Mil-STD-810G or equivalent. The technical report should include a compliance matrix indicating the method, procedure, limits, acceptance and rejection criteria and method of compliance. Compliance is to be provided by actual testing or qualification by similarity or analysis.
S.N0 TEST AS PER. MIL-STD-810G
1 Temperature 501.5,502.5
2 Humidity 507.5
3 Icing/Deicing fluids 521.3/504.1
Table-2: Environmental Testing
4 4. Ball bearing- Tail Rotor Pitch Slider (Part No. 302P 643H 1000 202):
Figure-1 shows the ball bearing with its nominal dimensions.
4.1.1. Bearing Arrangement and Lubrication provision:
The bearing must be grease packed. The bearing arrangement is as shown in Figure-2. Refer Annexure for remaining details of the bearing.
4.1.2. Load-Motion Spectrum:
The bearing is subjected to a constant rotation of 4012 rpm. The load-motion spectrum for the bearing is as shown in Table-3
%Time Axial Load Radial Load Operating Frequency (Hz)
Table-3: Load-Motion Spectrum for Ball bearing- Tail rotor pitch slider
4.1.3. Housing and Shaft Details:
The dimensions of the mating surfaces are shown in Table-4. However, the vendor may propose tolerance limits, surface finish details on the mating surfaces for better life and performance.
Material CR Steel: Titanium:
Surface Finish: 1.6 microns Surface Finish: 1.6 microns
Table-4: Interface details for Ball bearing- Tail rotor pitch slider
4.1.4. Applicable Standards for bearing development:
Relevant and applicable portions of standards (refer latest Issues) listed below in Table-5 shall be considered and satisfied in design, manufacture, testing & certification of the bearings.
MIL-B-7949 Ball bearings
Table-5: Standards for Development of Ball bearing
4.1.5. Service Life
The bearing shall have a minimum L10 life of 3000 hours with a TBO of 500 hours
4.1.6. Load Ratings
Static and Dynamic Load Ratings to be provided by the vendor. Justification through Test or Analysis to be provided for the values.
5 5. 0 Qualification Testing
The vendor has to carry out the following checks / tests and submit the test report.
(a) Radial Internal Clearance
(b) Axial Internal Clearance
(c) Radial Run Out Test
(d) Face Out Test
(e) Frictional Torque Test
(f) Static Radial Load Capacity
(g) Ultimate Radial Load Test
(h) Static Axial Load Capacity
(i) Ultimate Axial Load Test
(j) Breaking Load Test for balls
(k) Dimensional Stability Test
(l) Residual Magnetism
(m) Vibration & Mechanical Shock Test
(n) Oil Contamination Test
(o) Endurance Test
Any other test required to qualify a specific type of bearing is to be done by the vendor.
6 6.0 Tests to be done by HAL
Verification of the function / performance and reliability of the bearing will be carried out by HAL through ground test vehicle and prototype helicopters.
7 7.0 Responsibility
Responsibility of design and its approval, testing and certification of bearings, quality control, incorporation of any modification and release of design shall be with the original supplier/vendor. This will also include introduction of modifications and release of service bulletins etc. by the supplier/vendor in concurrence with HAL.
8 8.0 Prior experience
Vendor should have developed/ supplied similar items of same/ similar/ advanced specifications as given in this RFQ to reputed aerospace industries or organizations across the globe. The supplied components shall be used on aerospace platforms certified by any of the certification agencies like CEMILAC, DGCA, EASA, FAA etc. Details of the executed contracts should be provided to ascertain credentials.
9 9.0 Documents to be provided by vendor
1) Dimensional Controlled drawing for approval of HAL.
2) Vendor has to issue Certificate of Conformance (CoC).
3) Time Between Overhaul(TBO) in operating hours.
4) Total technical life in operating hours.
5) Storage and preservation details.
6) Vendor should provide update on any changes, revision, issue, modification status along with the reasons and support documents such as Modification leaflet/Service Bulletin/Service instruction/Service Letter etc, as applicable without any financial implications to HAL.
7) Stress analysis report for each bearing
8) Environmental Test/Analysis Reports as per para 3.1
9) Technical Life Report based on load-motion spectrum
10) Technical Report on Load Ratings for each bearing
10 10.0 Technical Assistance and Continued Airworthiness
Vendor to provide for the following:
1) Technical support during prototype integration, whirl tower testing, ground/flight-testing and certification with respect to resolving technical problems, snags/defect/failures observed during operation.
2) Technical support for detailed investigation reports on failure, defects reported during operation.
3) Issues regarding obsolescence and actions to overcome the same to be informed well in advance to HAL for supporting the existing fleet.
4) Vendor shall provide necessary training, authorization and documents with rejection criteria.
5) Any additional documents as required by Indian Certification agencies (CEMILAC & DGAQA)
ENCLOSURE TO EOI No: RC/IMM/EOI(BRGS-SELFLUB.BUSHES)-04/2024
PRICE BID (EC2024)
Import Content Indigenous Content
in Foreign Currency Currency Exchange Rate Adopted Basic Value of Import IGST Including Customs Duty in INR Total import value in INR Base value in INR GST in % GST in INR Total Indeginious content Total amortized unit value in INR Indigenous Content in %
S/N DESCRIPTION QTY UOM A B C= A*B D E=C+D F G H I=F+H J=E+I
1 Total Development cost for BALL BEARING-TAIL ROTOR HUB. HAL PART NO:302P 641H 3000 202 (Complete Price breakup to be provided in price break up sheet) 1 Lumpsum 0.00 0.00 0.00 0.00 0.00 0.00
Unit price for BALL BEARING-TAIL ROTOR HUB. HAL PART NO:302P 641H 3000 202 1 No 0.00 0.00 0.00 0.00 0.00 0.00
Import Content Indigenous Content
in Foreign Currency Currency Exchange Rate Adopted Basic Value of Inport IGST Including Customs Duty in INR Total import value in INR Base value in INR GST in % GST in INR Total Indeginious content Total amortized unit value in INR Indigenous Content in %
S/N DESCRIPTION QTY UOM A B C= A*B D E=C+D F G H I=F+H J=E+I
2 Total development cost for BALL BEARING -TAIL ROTOR PITCH SLIDER (HAL PART NO: 302P 643H 1000 202) (Complete Price breakup to be provided in price break up sheet) 1 Lumpsum 0.00 0.00 0.00 0.00 0.00 0.00
Unit price for BALL BEARING -TAIL ROTOR PITCH SLIDER (HAL PART NO: 302P 643H 1000 202) 1 No 0.00 0.00 0.00 0.00 0.00 0.00
Import Content Indigenous Content
in Foreign Currency Currency Exchange Rate Adopted Basic Value of Inport IGST Including Customs Duty in INR Total import value in INR Base value in INR GST in % GST in INR Total Indeginious content Total amortized unit value in INR Indigenous Content in %
S/N DESCRIPTION QTY UOM A B C= A*B D E=C+D F G H I=F+H J=E+I
3 Total Development cost for COMBINED THRUST & NEEDLE ROLLER BEARING (HAL Part No.302P 622H 2100 001) (Complete Price breakup to be provided in price break up sheet) 1 Lumpsum 0.00 0.00 0.00 0.00 0.00 0.00
Unit Price for COMBINED THRUST & NEEDLE ROLLER BEARING (HAL Part No.302P 622H 2100 001) 1 No 0.00 0.00 0.00 0.00 0.00 0.00
Import Content Indigenous Content
in Foreign Currency Currency Exchange Rate Adopted Basic Value of Inport IGST Including Customs Duty in INR Total import value in INR Base value in INR GST in % GST in INR Total Indeginious content Total amortized unit value in INR Indigenous Content in %
S/N DESCRIPTION QTY UOM A B C= A*B D E=C+D F G H I=F+H J=E+I
3 Total Development cost for SPHERICAL BEARING (HAL Part No.302P 623H 3210 001) (Complete Price breakup to be provided in price break up sheet) 1 Lumpsum 0.00 0.00 0.00 0.00 0.00 0.00
Unit Price for SPHERICAL BEARING (HAL Part No.302P 623H 3210 001) 1 No 0.00 0.00 0.00 0.00 0.00 0.00
Import Content Indigenous Content
in Foreign Currency Currency Exchange Rate Adopted Basic Value of Inport IGST Including Customs Duty in INR Total import value in INR Base value in INR GST in % GST in INR Total Indeginious content Total amortized unit value in INR Indigenous Content in %
S/N DESCRIPTION QTY UOM A B C= A*B D E=C+D F G H I=F+H J=E+I
3 (a) Total Development cost for SPHERICAL BEARINGS (HAL Part No. 302P 640H 1000 202) (Complete Price breakup to be provided in price break up sheet) 1 Lumpsum 0.00 0.00 0.00 0.00 0.00 0.00
Unit Price for SPHERICAL BEARINGS (HAL Part No. 302P 640H 1000 202) 1 No 0.00 0.00 0.00 0.00 0.00 0.00
Import Content Indigenous Content
in Foreign Currency Currency Exchange Rate Adopted Basic Value of Inport IGST Including Customs Duty in INR Total import value in INR Base value in INR GST in % GST in INR Total Indeginious content Total amortized unit value in INR Indigenous Content in %
S/N DESCRIPTION QTY UOM A B C= A*B D E=C+D F G H I=F+H J=E+I
4 Total Development cost for TEFLON LINED BUSH (HAL PART NO: 302P 623H 2100 202) (Complete Price breakup to be provided in price break up sheet) 1 Lumpsum 0.00 0.00 0.00 0.00 0.00 0.00
Unit Price for TEFLON LINED BUSH (HAL PART NO: 302P 623H 2100 202) 1 No 0.00 0.00 0.00 0.00 0.00 0.00
1. If import is done with multiple curriences, then basic value of import ( Column I) to be filled directly and break up ( details asked in column F and column G to be provided in area earmatked for "Additional information, if any"
Price Break up for Development cost.
S/N DESCRIPTION QTY UOM UNIT PRICE in Rs
Adiitional Information, if any
EOI No. RC/IMM/EOI(BRGS-SELFLUB.BUSHES)-04/2024 PART-IE
SPHERICAL BEARINGS(RC/RUAVIRS/TS/003)
SL No HAL Specification Vendor's Compliance Remarks
Hindustan Aeronautics Limited (HAL), Bangalore, India has undertaken the Design & Development of a 200 Kg class Rotary Unmanned Aerial Vehicle (RUAV). Main and tail rotor upper control system requires self lubricated spherical bearings. These spherical bearing can be either off-the-shelf or through new development. The technical requirement of the spherical bearings are described in this specification document.
2 Operating and Storage Conditions
These bearings shall be designed to operate and store without any time limitations and without impairment or degradation in the performance under the following environmental condition.
2.1 Operating Conditions:
Operating temperature:
-40 deg C to +85 deg C
Humidity: up to 100% relative humidity
2.2 Storage Conditions:
StorageTemperature :
-54 deg C to +85 deg C
up to 100% relative humidity
2.3 Surface exposure: Snow, salt fog, sand & dust and oil/ solvent
3 Regulations and Standards
Relevant and applicable portions of standards (refer latest Issues) listed below shall be considered for design,manufacture, testing, analysis and certification of the bearings.
Mil-STD-810G or equivalent Environmental Tests Methods
Mil-STD-2073-1E Standard Practice for Military Packaging
AS81820 / or equivalent Qualification of self lubricated spherical bearing
Table-1: Applicable Standards
4 Environmental Qualification
For qualification of bearings, vendor to comply to the environmental standards placed in Table-2. The technical proposal should include a compliance matrix indicating the method, procedure, limits, acceptance and rejection criteria and method of compliance. Compliance is to be provided by actual testing or qualification by similarity or analysis.
S.N0 REQUIREMENTS AS PER.
1 Temperature 501.5, 502.5
2 Humidity 507.5
3 Sand & Dust 510.5
4 Salt Fog 509.5
5 Fungus resistance 508.6
7 Acidic Atmosphere 518.1
8 Contamination 504
Table-2: Environmental Qualification Requirements
5 Test and Service Life
These bearings shall meet a minimum technical life (L10) of 1000 hrs for the given load-motion spectrum. Vendor shall specify the acceptable wear limit of the liner for the specified life. Compliance report for the technical life shall be provided by the vendor. Vendor to provide the break-away torque for the bearings.
6 Spherical Bearings and Load-Motion Spectrum
Two types of spherical bearings are required in the upper control system of main and tail rotor as given below. The recommended material and liner system of the bearing is given in Table-3.
Inner Race Outer Race Liner System
Material Corrosion Resistant Steel Corrosion Resistant Steel Self lubricated
Specification Vendor to specify Vendor to specify Vendor to specify
Table-3: Material Detail of the Bearings
6.1 Spherical Bearing 1 (Part No. 302P 623H 3210 001)
The spherical bearing is shown in Figure-1. The load-motion spectrum is provided in Table-4. The interface details of the bearing is placed in Table-5.
Figure-1: Spherical Bearing 1 (302P 623H 3210 001)with Nominal Dimensions in mm
Table-4: Load Motion Spectrum of Spherical Bearing 1
Material Steel Steel
Specification 15/5 PH AMS 5659 H 1100 15/5 PH AMS 5659 H 1100
Table-5: Shaft and Housing Details of Spherical Bearing 1
6.2 Spherical Bearing 2 (Part No. 302P 640H 1000 202)
The spherical bearing is shown in Figure-2. The load-motion spectrum for the spherical bearing is provided in Table-6. The interface details of the bearing is placed in Table-7.
Figure-2: Spherical Bearing 2(302P 640H 1000 202) with Nominal Dimensions in mm
Table-6: Load Motion Spectrum of Spherical Bearing 2
Material Titanium Titanium
Specification WL 3.7164.1 WL 3.7164.1
Table-7: Shaft and Housing Details of Spherical Bearing 2
7 Tests to be done by HAL
Verification of the function / performance and reliability of the bearing will be carried out by HAL through ground test vehicle and prototype helicopters.
8 Staking of the Bearings
Bearings shall be assembled onto housing using anvil-staking process. Accordingly, vendor shall provide one complete set of necessary staking tools required for anvil staking process for each type of bearing.
9 Responsibility
Responsibility of design and its approval, testing and certification of bearings, quality control, incorporation of any modification and release of design shall be with the original supplier/vendor. This will also include introduction of modifications and release of service bulletins etc. by the supplier/vendor in concurrence with HAL.
10 Prior experience
Vendor should have developed/ supplied similar items of same/ similar/ advanced specifications as given in this RFQ to reputed aerospace industries or organizations across the globe. The supplied components shall be used on aerospace platforms certified by any of the certification agencies like CEMILAC, DGCA, EASA, FAA etc. Details of the executed contracts should be provided to ascertain credentials.
11 Documents to be provided by vendor
1) Dimension controlled drawings for approval at HAL.
2) Vendor has to issue Certificate of Conformance (CoC).
3) Failure Modes and Effects Analysis (FMEA) and Functional Hazard Analysis (FHA).
4) Storage and preservation conditions/details.
5) Vendor should provide update on any changes, revision, issue, modification status along with the reasons and support documents such as modification leaflet / service bulletin / service instruction / service letter etc, as applicable without any financial implications to HAL.
6) Stress analysis report.
7) Wear analysis details
8) Environmental test reports (Refer para 4).
9) Technical life report based on load-motion spectrum (Refer para 5 and 6)
10) All necessary documentary support for obtaining installation clearance from, Indian Military Certification authorities namely RCMA (H/C), CEMILAC and DGAQA.
12 Technical Assistance and Continued Airworthiness
Vendor to provide for the following:
1) Technical support during prototype integration, whirl tower testing, ground/flight-testing and certification with respect to resolving technical problems, snags/defect/failures observed during operation.
2) Technical support for investigation of defect / failure during prototype development and in-service/operational issues.
3) Vendor shall provide necessary documentation, authorization with reference to acceptance/rejection criteria.
EOI No. RC/IMM/EOI(BRGS-SELFLUB.BUSHES)-04/2024 PART-IF
TEFLON LINED BUSH (RC/RUAV/RS/TS/004)
S/n HAL Specification Vendor Compliance Remarks
Hindustan Aeronautics Limited (HAL), Bangalore, India has undertaken the Design & Development of a 200 Kg class Rotary Unmanned Aerial Vehicle (RUAV). Rotor system of RUAV require teflon lined/coated bushes to protect parts from wear. The bush detailed in this specification can be either off-the-shelf or it can be through new development.
2 Operating and Storage Conditions
The bush shall be designed to operate and store without any time limitations and without impairment or degradation in the performance under the following environmental conditions.
2.1 Operating Environment
Operating temperature : -40 to +85 0C
Humidity: Upto 100 +0/-5 % relative humidity
2.2 Storage Environment
Storage temperature:
Upto 100 +0/-5 % relative humidity
3 Fluid Compatibility
The liner shall be compatible with aircraft hydraulic fluids (MIL-PRF-5606), lubricating oils (DERD 2487 (OX 38) & MIL-PRF-23699), de-icing fluids, standard cleaning fluids, ATF, Anti corrosion fluids (MIL-C-81309E) and water.
The criteria for replacement of the bushes are based on the wear with a wear limit of 0.125 mm on thickness and have to survive for a minimum period of 250 hrs under the load-motion spectrum detailed in this specification before replacement.
5 Environmental Qualification
For the qualification of the bushes, the vendor has to comply to the environmental standards placed in Table-1. The technical proposal should include a compliance matrix indicating the method, procedure, limits, acceptance and rejection criteria and method of compliance. Compliance is to be provided by actual testing or qualification by similarity or analysis.
Table-1: Environmental Qualification Requirements
6 Liner / Coating Integrity
The liner / coating shall be uniform in texture and shall contain no embedded contaminants. The material used in the liner/coating shall be free of defects, cracks, voids and pores. There shall be no separation or lifting of the liner/coating at any edges, as per para 3.5.4.1 of SAE AS8943 standard.
If the self lubricating property is achieved through a liner, then peel test must be carried out as per para 3.5.4.2 of SAE AS8943 standard using ASTM C 794 as guidelines. Vendor has to determine the mean and standard deviation of peel strength values for the liner / coating based upon a minimum of 6 peel strength test and the same to be included in the QTR (Qualification test report).
7 Tests to be done by HAL
Verification of the function / performance and reliability of the bushes will be carried out by HAL through ground test vehicle and prototype helicopters.
8 Responsibility
Responsibility of design and its approval, testing and certification of bushes, quality control, incorporation of any modification and release of design shall be with the original supplier/vendor. This will also include introduction of modifications and release of service bulletins etc. by the supplier/vendor in concurrence with HAL.
9 Teflon Lined/Coated Bush-1:
Figure-1: Teflon lined/Coated Bush-1: 302P 623H 2100 202
9.1 Applicable Standards
Relevant and applicable portions of standards (refer latest Issues) listed in Table-2 shall be considered for design, manufacture, testing, analysis and certification of the bearings.
Mil-STD-810G or equivalent Environmental Tests methods
Mil-STD-2073-1E Standard Practice for Military Packaging
SAE AS81934 Qualification of journal bearings, straight and flanged, self lubricated.
Table-2: Applicable Standards for Bush-1
Metal Bush : Corrosion Resistant Steel
Liner/Coating : PTFE (Polytetrafluoroethylene)
9.3 Shaft and Housing Details
Material: Steel (15/5 PH AMS 5659 H1100)
Material: Aluminium (AA 7075 T7351/ AMS QQ-A-250-12)
9.4 Liner Thickness
The vendor shall arrive at a final value of liner thickness based on the service life requirement for the load-motion spectrums mentioned in Table-3.
9.5 Load-Motion Spectrum
The load-motion spectrum for the bush is placed in Table-3.
Bearing Pressure Oscillation Frequency (Hz) % Time
Normal Operation 0.91 ±80 14 94
Limit Condition 1.85 ±100 14 6
Table-3: Load-motion spectrum of Bush-1
10 Prior Experience
Vendor should have developed/ supplied similar items of same/ similar/ advanced specifications as given in this RFQ to reputed aerospace industries or organizations across the globe. The supplied components shall be used on aerospace platforms certified by any of the certification agencies like CEMILAC, DGCA, EASA, FAA etc. Details of the executed contracts should be provided to ascertain credentials
11 Documents to be provided by Vendor
1) Organization Approval Certificate of the firm from the country of origin Aviation Authority and Quality Organizations like ISO etc.
2) All necessary documentary support for obtaining installation clearance from DGCA, Indian Military Certification authorities namely RCMA (H/C), CEMILAC and DGAQA.
3) Dimensional controlled drawing for approval at HAL.
4) Vendor has to issue Certificate of Conformance (CoC).
5) Test/Analysis/Similarity report as per para 6.0
6) Storage and preservation conditions/details.
7) Vendor should provide update on any changes, revision, issue, modification status along with the reasons and support documents such as modification leaflet / service bulletin / service instruction / service letter etc, as applicable without any financial implications to HAL.
8) Technical life report based on load-motion spectrum.
9) All necessary documentary support for obtaining installation clearance from, Indian Military Certification authorities namely RCMA (H/C), CEMILAC and DGAQA.
12 Technical Assistance and Continued Airworthiness
Vendor to provide the following:
1) Technical support during prototype integration, whirl tower testing, ground/flight-testing and certification with respect to resolving technical problems, snags/defect/failures observed during operation.
2) Technical support for investigation of defect / failure during prototype development and in-service/operational issues.
3) Vendor shall provide necessary documentation, authorization with reference to acceptance/rejection criteria.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
EOICoveringLetter.pdf
TENDER_DOCUMENT • 0.48 MB
PARTIG-TRHUBBB.xlsm
TENDER_DOCUMENT • 0.12 MB
PARTIH-TRPS.xlsm
TENDER_DOCUMENT • 0.12 MB
4.PartIC.pdf
TENDER_DOCUMENT • 2.25 MB
5.PartID.pdf
TENDER_DOCUMENT • 1.67 MB
PARTII-Priceformat.xlsm
TENDER_DOCUMENT • 0.02 MB
2.PartIA.pdf
TENDER_DOCUMENT • 2.12 MB
3.PartIB.pdf
TENDER_DOCUMENT • 2.30 MB
PartIIINDA.pdf
TENDER_DOCUMENT • 0.34 MB
9.PartIVMakeIIProcedure.pdf
TENDER_DOCUMENT • 0.65 MB
PARTIE-SphericalBearings.xlsm
TENDER_DOCUMENT • 0.30 MB
PARTIF-TEFLONLINEBUSH.xlsm
TENDER_DOCUMENT • 0.16 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .