GE(W)/HSR-20/2023-24 REPAIR / MAINT OF MECH LOUNDRY, FIRE FIGHTING, HEAT AND SMOKE DETECTION SYSTEM AND EOT OVER HEAD CRANES INCLUDING OTHER CONCERNED WORKS AT HISAR MIL STN UNDER GE(WEST) HISAR

Amount

M&L for comprehensive maintenance of steam heated laundry plant and NON IBR steam Boiler of cap 600 Kg per hours steam at 10.5 Kg / Sqcm pressure comprising of washing machine, washer extractor hydro extractor drying tumbler, flat work ironer, flat bed press, air compressor, auto claving machine and matteress sterlizer as per instruction laid down by manufacturer i.e. daily check and cleaning including first hand repair , maint and greasing of moving parts, including minor repairs of electrical panels, instruments starters, etc. completre all as directed for smooth and efficent fucntioning of laundry plant comprising of the following machines and equipments.:-

(i) Commercial type washing machine steam heated front loaded type 50 Kgs capacity fully automatic . - 04 Nos Model : LEW/F/50 Make : Lucky Engineering Works (ii) Hydro extractor top loading type self balancing direct driven with DG injection break fully automatic - 04 Nos Model : LEW/H/25 Make : Lucky Engineering works (iii) Hygenic washer extractor (sluicing machine) steam heated 25 Kg capacity - 02 Nos (iv) Roll callender machine (flat work ironer) steam heated having roller of size 470 x2100 m m complete with controls and motor - 02 Nos Model: LEW/FW. Make: Lucky Engineering works. (v) Flat Bed press steam heated head size 750 x 1500 mm auto matic with control model LEW/FBP - 04 Nos Model : LEW/FBP Make : Lucky Engineering Works (vi) Auto claving machine steam operated 25 Kg capacity complete with accessories - 02 Nos Model : LEW /DT/50 Make : Lucky Engineering Works

(vii) Steam operated matteress sterilizers heavy duty 42" x 48" x 48" confirming jto IS- 3829 complete with all assessories i.e Vaccum pump loading carrage and transfer trolley etc cap 150 Kg - 01 Nos Make : MEDIQUIP (viii) Drying tumbler steam heated front loaded type open pocket 50 Kg capacity fully automatic - 04 Nos (ix) Reciprocating air cooled compressor with 250 ltrs cap air tank with motor. - 02 Nos Make : Elgi (x) NON IBR steam boiler of cap 600 Kg /Per hour at 10.5 Kg per Sqcm complete with all safety control oil service tank, water service tank incl MS piping - 02 Nos Make : Thermax Model : RXA06/10.54/HSD FIRED -

M&L for comprehensive maintenance of steam heated laundry plant and NON IBR steam Boiler of cap 600 Kg per hours steam at 10.5 Kg / Sqcm pressure comprising of washing machine, washer extractor hydro extractor drying tumbler, flat work ironer, flat bed press, air compressor, auto claving machine and matteress sterlizer as per instruction laid down by manufacturer i.e. daily check and cleaning including first hand repair , maint and greasing of moving parts, including minor repairs of electrical panels, instruments starters, etc. completre all as directed for smooth and efficent fucntioning of laundry plant comprising of the following machines and equipments.:-

Supply & Fixing Rubber Ring For Door complete all as specified and directed.

Supply & Fixing Contactor suitable for complete all as specified and directed.

Supply & Fixing Push Button Assembly, complete all as specified and directed.

Supply & Fixing Indicator Light, complete all as specified and directed.

Supply & Fixing OFF Delay Timer, complete all as specified and directed.

Supply & Fixing Timer 0-15, complete all as specified and directed.

Supply & Fixing Limit Switch, complete all as specified and directed.

Supply & Fixing Door Lock, complete all as specified and directed.

Supply & Fixing V-Belt for Main Pulley, ( for Sluicing machine) complete all as specified and directed.

Supply & Fixing V- Belt for Idler Pulley, ( for Sluicing machine) complete all as specified and directed.

Supply & Fixing Micro Processor Cyclic Timer, complete all as specified and directed.

Supply & Fixing Steam Valve, complete all as specified and directed.

Supply & Fixing Water Inlet Valve, complete all as specified and directed.

Supply & Fixing Toggle Switch, complete all as specified and directed.

Supply & Fixing Motorized Drain Valve, complete all as specified and directed.

Supply & Fixing Hose Pipe for Steam, complete all as specified and directed.

Supply & Fixing Hose Pipe for Water Inlet, complete all as specified and directed.

Supply & Fixing Hose Pipe for Drain, complete all as specified and directed.

Supply & Fixing Door Nub, complete all as specified and directed.

Supply & Fixing V-Belt for Main Pulley,(of Front Loading washing Machine) complete all as specified and directed.

Supply & Fixing V- Belt for Idler Pulley,(of Front Loading washing Machine) complete all as specified and directed.

Supply & Fixing Rubber Ring For Door,(of Front Loading washing Machine) complete all as specified and directed.

Supply & Fixing V-belt, (for Flat work Ironer)complete all as specified and directed.

Supply & Fixing Chain, complete all as specified and directed.

Supply & Fixing Nuts & bolts, complete all as specified and directed.

Supply only Conveyor belt, complete all as specified and directed.

Supply & Fixing Toughened Door Glass, complete all as specified and directed.

Supply & Fixing Door Handle with Lock, complete all as specified and directed.

Supply & Fixing Padding cloth, complete all as specified and directed.

Supply & Fixing Teflon cloth, complete all as specified and directed.

Supply only Pump seal, complete all as specified and directed.

Supply & Fixing Burner nozzle, complete all as specified and directed.

Supply & Fixing Photocell, complete all as specified and directed.

Supply & Fixing Press switch,THERMAX/PS complete all as specified and directed.

Supply & Fixing Flame coke, complete all as specified and directed.

Supply & Fixing Filter suitale for boiler complete all as specified and directed.

Supply & Fixing MCB TPN 63 Amps 10KA type B curve complete all as specified and directed.

Supply & Fixing air presser pipe line with connected accesoris complete all as specified and directed.

M&L Cutting of old burnt winding and re-winding of electric motor 3 to 5 HP, 415 volts 3 phase, 50 Hz with super enamelled copper wire of superior quality as per existing gauge incl varnishing insulating material complete and replacement of defective bearing, greasing, oiling etc incl re-assembling, transporting, fixing in position, making connection, commissioning & testing complete.all as specified and directed .

M&L buffing for flate bed pressing machine and change the new cloth in replacement of old cloth & servicing the machine & repair/change the small parts including in the job all as specified & directed.

M&L for painting of GI Pipe 80 to 200 mm dia two coats of deco paint of approved colour after preparation of surface including filling of depressions over existing surface complete all as specified and directed.

M&L for painting of diesel pump as per existing colour code two coats of deco paint of approved colour after preparation of surface including filling of depressions over existing surface complete all as specified and directed.

Supply, fixing , connecting & testing sluice valve of size 100 mm bore class PN 1.6 cast iron body with forged steel spindle, non rising type & cast iron wheel head, both ends flanged IS-14846 marked, complete including taking down old U/S sluice valve complete all as specified and as directed.

Supply & fixing , connecting & testing sluice valve of size 80 mm bore class PN 1.6 cast iron body with forged steel spindle, non rising type & cast iron wheel head, both ends flanged IS-14846 marked, complete including taking down old U/S sluice valve complete all as specified and as directed.

Supply, fixing , connecting & testing sluice valve of size 150 mm bore class PN 1.6 cast iron body with forged steel spindle, non rising type & cast iron wheel head, both ends flanged IS-14846 marked, complete including taking down old U/S sluice valve complete all as specified and as directed.

S&F Non-return Valve cast iron body, ISI marked, heavy duty both ends flanged suitable for 100 mm bore pipe fixed in repairs/ replacement all as specified and directed.

S&F Non-return Valve cast iron body, ISI marked, heavy duty both ends flanged suitable for 150 mm bore pipe fixed in repairs/ replacement all as specified and directed.

M & L for RRL hose 15 metre lenth 63 mm dia with male female coupling, duly ISI marked or IS specification complete all as specified and directed

Supply & fixing Person Machine Interface PMI-3 complete all as specified and directed.

Supply & fixing Repeater Panel complete all as specified and directed.

Supply & fixingy Device Loop Card complete all as specified and directed.

Supply & fixing Multicriteria Detector complete all as specified and directed.

Supply & fixing Manual Call Point complete all as specified and directed.

Supply & fixing Heat Detector complete all as specified and directed.

Supply & fixing Control Module complete all as specified and directed.

Supply & fixing Monitor Module complete all as specified and directed.

Supply & fixing Hooter complete all as specified and directed.

Supply & fixing Fault Isolator complete all as specified and directed.

M & L for Fire hose Reels 20 metre length, 20 mm dia with male female coupling, duly ISI marked or IS specification complete all as specified and directed

S&F 2C x 1.5 sqmm 1100 volt FRLS pvc cable suitable for fire alarm system complete all as specified and directed.

S&F 25 MM PVC conduit pipe for use for fire alarm system complete all as specified and directed.

Repair/ Servicing of Diesel Engine driven pump set Model no. CE 80/40 ser no. 188241100480 make KSB change oil filter, air filter , Fuel Filter, check the battery terminal and fill up engine oil and coolant complete all as specified and directed.

Supply and fixing in replacement of maintenance free battery with cat eye showing charged conditions OF Battery of capacity 150 `EXIDE XPRESS’ model no.FXPO MHD1500/XP1500 of exide make fully charged complete all as specified and directed.

S & F of diesel Pipe of diedel engine as per existing pump all as specified and directed

M&L for cleaning of underground sump/ raw water tank of capacity 1 LG by taking out silt mud and vegetable growth etc in shape of sludge including residual water and disposal of the same n.exc 50 mtr away scrapping of internal surface of walls, floors with wire brush , brooms jute, appliying one coat of lime wash internally complete all as specified and directed.

M&L for rewinding of electric motor of 3 Phase, 415 Volts, Cap 15 HP, after dismantling the stator and rotor, removing burnt windings, cleaning the slots, rewinding the motor with super enamelled quality hermatic grade copper winding wire of proper gauge and number of turns as per the existing windings including numex paper, glass paper, thimble, glass sleevs, main lead, back doll, Varnish and drying in oven including fitments of thermostate protection relay and bearing of specified type, including required nut bolts (stainless steel) reassembling and air testing to ensure leak lightness of the joints complete all as specified and directed. Note :- Spares / parts to be replaced shall be measured & paid secretly under respective items

Dismantling of 75 HP motor electric from foundation and pump opening the same and only serviceing of motor by cleaning internally and externally, varnishing of winding, checing of stator, greasing of bearing, fittings allignment, connecting electrically re-fixing and testing the job shall be done at plant only complete all as specified and directed.

S&F contactor MNX 80 complete all as specified and directed.

S&F contactor MNX 18 to 32 complete all as specified and directed.

S&F relay MNX A-2 complete all as specified and directed.

S&F indicator switch LED type R,Y,B req as per site requirement all as specified and directed

M&L for repair of panel door and lock arrangement and painting of full body of panel with two coats of deco paint of approved colour after preparation of surface including filling of depressions over existing surface complete all as specified and directed.

S&F in replacement of industrial pressure switch as per existing size all as per specified and directed.

Check for worn collector shoes, sag in main runway wiring, ensuring contact to be kept through the entire length runway. Check alignment and relocation.Inspect for wear of bridge and trolley wheel, flat sports and check in flange. Ensure drive wheels are of the same diameter.Checking, cleaning the contacts of the controllers and control panel.Checking the pin & bushes for wear of flexible coupling and proper adjusting.Cleaning the plunjer blocks and applying fresh grease.Cleaning and greasing the winch & rope assy.servicing the push button station.Servicing, aligning & adjusting the limit switches.Lubrication of all moving parts & applies fresh grease by authorized service engineer all as directed by EIC. (Note: 1.minor parts as piece of wire, grease, nut bolt if required to be include in quoted rate,2. Major part if found unserviceable to be replaced/repair separetly under respective item) complete all as specified and directed.

Repair / replacement of the push button complete all as specified and directed.

M & L for Checking the brake system & replacing the wear out liners and aligning complete of 2/ 15 ton capacity crane complete all as specified and directed.

Replacement of rope suitable for 2 Ton capacity crane complete all as specified and directed.

Replacement of rope suitable for 15 Ton capacity crane complete all as specified and directed.

Replacement of Limit switch suitable for EOT crane operation complete all as specified and directed.

Replacement of Contactors 65 Amps (LC1D65A) suitable for 15 Ton capacity EOT crane complete all as specified and directed.

Replacement of Contactors 20 Amps (LC1D18A)) suitable for 15 Ton capacity EOT crane complete all as specified and directed.

M & L for Checking of Electrical motor & repairing / rewinding the same suitable for 2 Ton EOT crane motors complete all as specified and directed.

M & L for Checking of Electrical motor & repairing / rewinding the same suitable for 15 Ton EOT crane motors complete all as specified and directed.

M& L for Checking of wiring in Panel & sealing the control Panel complete all as specified and directed.

Replacement of Pedestal Bearing with oil seal suitable for 15 / 2 Ton capacity EOT crane complete all as specified and directed.

Replacement /topping up of gear oil suitable for EOT crane complete all as specified and directed.

Painting of complete EOT crane of capacity 15 / 2 ton with Synthetic enamel paint including scraping of old paint with wire brush complete all as specified and directed.

Supply and fixing NO/NC Switch / Element for 2/15 Ton EOT Crane complete all as specified and directed.

Supply and fixing in replacement of Current collector carbon brush (2 and 15 Ton) for 2/15 Ton EOT Crane all as specified and directed

Supply and fixing in replacement of Bus bar 4 clip U type holder for 2/15 Ton EOT Crane all as specified and directed

M & L for Repair to speed control device suitable for 15 / 2 Ton capacity EOT crane complete all as specified and directed.

M&L for fixing MCCB rated 63 Amps,3 Pole 415 V , Breaking Capacity 25 KA complete all as specified and directed.

M & L for hiering of Crane /Hydra / Transporting vehicle for taking down & Shifting of over head EOT crane Gear box for repair / maintenance / checking and replacement of any damaged part at OEM including to and fro and refixing the same and testing of load of 2/ 15 ton capacity complete all as specified and directed. ( Note: cost of material replaced to be paid under respective item as supply only)

Supply only M-4 Penion for Main P-1 complete all as specified and directed.

Supply only M-4 Penion for Main P-2 complete all as specified and directed.

Supply only M-4 Penion for Main P-3 complete all as specified and directed.

Supply only M-4 Penion for Main P-4 complete all as specified and directed.

Supply only M-4 Gear for Main G-1 complete all as specified and directed.

Supply only M-4 Gear for Main G-2 complete all as specified and directed.

Supply only M-4 Gear for Main G-3 complete all as specified and directed.

Supply only M-4 Gear for Main G-4 complete all as specified and directed.

fauji electric works

Siya constructions