Construction of brick boundary wall alongwith construction of Inspector quarter,two nos of staff quarter,motor garage, ring well at Baithalangso Hamren etc

Amount

Construction of brick boundary wall with security grill around Labour Inspector office.

EARTH WORK IN FILLING ;Excavating, supplying and filling of local earth (including royalty) by mechanical transport up to a lead of 5 Km. also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete.Labour inspector’s quarter ,Staff quarter and Garage.

HEAVY DUTY IRON GATE DOUBLE LEAF;Supplying fitting and fixing double leaf heavy duty iron gate frame made from 50mm x 6mm MS angle at the middle 20mm dia M.S. bars at 200mm apart from bottom, flat to top flat including drilling, welding etc. Size :- (3.50 x 2.40) With MS Flat 40mm x 10mm

Construction of RCC Gate Post and Tie Beams (Size 0.45 x 0.45):-Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars 10mm QTS 0.62 Kg/Rm

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement

15 mm cement plaster on the rough side of single or half brick wall of mix : 1;4

Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm.

Construction of RCC Ring well with Plateform:- Excavation trenches of required width for pipes, cables, etc. including excavation for sockets, depth up to 1.5m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20cm in depth, including etc. ordinary rock, Pipes, cables exceeding 300mm dia but not exceeding 600mm dia.

Extra rates for quantities of works executed , In order water and/or liquid mud including pumping out water as required.

Providing and laying Non Pressure NP-4 class (heavy duty) RCC pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 including tessting etc. 600 mm dia RCC pipes

Platform:-Earth work in excavation by mechanical means (hydraulic excavation) manual means in foundation trenches or drain (not exceeding 1.5m in width or 10 sqm on plane) including dressing of sides and ramming of bottoms etc. All kinds of soil.

The brick masonary with common burst clay FPS (non modular) the bricks of class designation 10m in super structure above P/L upto floor level.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6

Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete. Cold twisted bars 10mm dia T.S. and 12mm dia T.S.

Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete. Cold twisted bars 12mm dia T.S.bars, 10mm dia T.S.bars and 8mm dia T.S.bar

Centering and shuttering including trytting propping etc. and removing of form Foundation, footing,bases of columns etc. for concrete,

Column, pillars, piers, abuyments, post, and strust.

Linters, beam, plinth beam griders, bressumers and cantilevers.

Providing and applying in position specified grade of reinforcement cement concrete excluding the cost of centering, shuttering finishing. All work upto P/L 1:1.5:3

Reinforcement cement concrete work in walls including attached pilaster, buttressed, plint and string courses fillets, columns, pillars, piers post and strust etc. P/L upto 1st floor level. 1:1.5:3 (1 cement : 1.5 coarse sand:3 granded stone aggregate 20mm nominal size etc.)

brick work with common burnt clay FRS (non modular) bricks of class designation 7.5 in foundation plinth in etc. Cement mortar 1:6

15mm concrete plaster on the rough side of single or half brick wall or half brick wall of mix.Cement mortar 1:4 (1 cement : 4 fine sand)

62 mm thick cement concrete flooring with concrete hardener tapping under layer 50mm thick cement concrete 1:2:4 and 12mm thick cement plaster consisting of mix 1:2 etc. This includes cost of cement slurry.

Applying one coat of water thin able cement primer of approved brand and manufacture on wall surface. Water thin able cement primer.

Finishing walls with proofing cement paint of required shade. New work (Two or more coats applied @3.84kg/10Sqm)

Construction of Labour Inspector Quarter :- Plinth Area

Over Head tank with staging height up 20 mtrs.

Site development

Cement concrete pavement with vacum dewatered concrete.

Construction of staff Quarter:- Plinth Area

Over Head tank with staging height up 20 mtrs.

Site development

Cement concrete pavement with vacum dewatered concrete.

Construction of Motor Garage :- Plinth Area

Over Head tank with staging height up 20 mtrs.

Site development

Cement concrete pavement with vacum dewatered concrete.

Electrification works for construction of Labour Inspector Quarter:-Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group B

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

3 pin 5/6 amp socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8/12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as required complete and as directed by the Department [Without regulator]. 1200 mm sweep

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as directed by the Department. Domestic, 230 mm sweep.

Supplying with fitting fixing of LED tube light luminaries complete with all accessories directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor cable as required and as directed by the department. Model TRIM LINEA NEU Cat. CCS-102-20-65-SL-DP-NWH, 1x20 W LED Fluorescent tube. (Crompton make or equivalent)

Supplying and fitting of 9/12/15 Watt LED lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Supplying and drawing of weather proof aluminium stranded conductor cable (ATC Twin Core, BTC) of the following size as directed and specified by the department 16.00 sq.mm twin core

Supplying of following sizes XLPE insulated and PVC sheathed aluminium conductor armoured power cable of 1.1 KV grade conforming to IS 7098 (Part - I) / 1988 with amendment up to date etc as required. (ATC make) . 2 Core A2ZWY A2XFY 25.00 Sq. mm. 2 Core armoured U.G. cable

Supplying installation, testing and commissioning of SUBMERSIBLE PUMP SET (Model No. 4W14BF2E-40+NDCP2),Single Phase 2HP with steel cable rope and submersible cable complete including connection as per specified and directed by the deptt. Single phase Submersible motor pump set (Texmo / Crompton Greaves suitable for 100 mm bore well and above. 2 HP STAGE 14 with control panel.

Supplying with fitting fixing of Single phase Energy meter with LCD display and Service connection charge for power supply & load security paid to APDCL as per specified and directed by the department.

Electrification works for construction of 2 Nos. Staff Quarters :-Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group B

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

3 pin 5/6 amp socket outlet

Bell push

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8/12 way, Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63 amps

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as required complete and as directed by the Department [Without regulator]. 1200 mm sweep

Supplying with fitting fixing of LED tube light luminaries complete with all accessories directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor cable as required and as directed by the department. Model TRIM LINEA NEU Cat. CCS-102-20-65-SL-DP-NWH, 1x20 W LED Fluorescent tube. (Crompton make or equivalent)

Supplying and fitting of 9/12/15 Watt LED lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Supplying and drawing of weather proof aluminium stranded conductor cable (ATC Twin Core, BTC) of the following size as directed and specified by the department 16.00 sq.mm twin core

Supplying of following sizes XLPE insulated and PVC sheathed aluminium conductor armoured power cable of 1.1 KV grade conforming to IS 7098 (Part - I) / 1988 with amendment up to date etc as required. (ATC make) . 2 Core A2ZWY A2XFY 25.00 Sq. mm. 2 Core armoured U.G. cable

Supplying with fitting fixing of Single phase Energy meter with LCD display and Service connection charge for power supply & load security paid to APDCL as per specified and directed by the department.

Electrification for construction of Motor Garage :- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group B

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

3 pin 5/6 amp socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings)

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying with fitting fixing of LED tube light luminaries complete with all accessories directly on wall / ceiling including connection with 1.5 sq mm P.V.C. insulated S.C.copper conductor cable as required and as directed by the department. Model TRIM LINEA NEU Cat. CCS-102-20-65-SL-DP-NWH, 1x20 W LED Fluorescent tube. (Crompton make or equivalent)

Supplying and fitting of 9/12/15 Watt LED lamp in the existing batten holder/angle holder/decorative bracket/bulk head fitting/ pendent holder etc. as specified and directed by the deptt.

Construction of Inspector Quarter Internal Water Supplyy and sanitary installation :-Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall. 15 mm dia nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

32 mm dia nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms

Providing and fixing gun metal gate valve with C.I. wheel of approved quality 25 mm nominal bore

20 mm nominal bore

Construction of Staff Quarter Internal Water Supply and sanitary Installation :-Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work - Exposed on wall. 15 mm dia nominal bore

20 mm dia nominal bore

25 mm dia nominal bore

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931..15 mm nominal bore.

15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gms

Providing and fixing gun metal gate valve with C.I. wheel of approved quality 25 mm nominal bore

20 mm nominal bore

Construction of Motor Garage Internal Water Supply and sanitary Installation :Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Sri Swarmal Agarwalla