GE(W)/HSR-20/21-22 SPECIAL REPAIR TO TO BLDG NO P-538 (OFFICER SINGLE ACCN) OF 33 ARMD DIV SIG REGT AND PROVN OF GEYSER FOR VARIOUS OPDS AND WARD AT HISAR MIL STN UNDER GE (WEST) HISAR

Amount

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc including removing rubbish complete all as specified and directed.

Demolition of cast in situ terrazo/ tiles any thickness on wall incl racking out joints, hacking for key & scrubbing down with water etc including removing rubbish complete all as specified and directed.

Demolition of reinforded cement concrete of any description and in any position not otherwise specifically provided for chajjas, beams, roof projection, parapet /railing, Columns taken for pressure grouting including removing rubbish complete all as specified and directed.

Demolition of cement concrete as in ground floors and pavings not exceeding 15 cm thick below or above ground level (unreinforced) incluiding removing rubbish complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:6 over brick / concrete wall surfaces finished even & fair without using extra cement on wall surfaces complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on brick / concrete wall surface finished even and fair without using extra cement complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 over brick / concrete ceiling surfaces finished even & fair w/o using extra cement surfaces complete all as specified and directed.

M&L for non-skid tiles joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for non-skid tiles joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for non-skid tiles joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm cut to size on vertical surface skirting set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for digital printed coloured designer glazed ceramic tiles in glossy / dull finish of size 300x450x7mm / 250x350x7mm thick as in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for 20 to 22mm thick, machine cut Kota stone slab of minimum size of 0.60m x 0.60m as in flooring , cooking platform, steps risers etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and over including 15mm thick screed bed in cement mortar 1:6 and for star case treads and window cill etc Kota stone be laid in one piece upto 1.5M length complete all as specified and directed.

M&L for 20 to 22mm thick, machine cut Kota stone slab, in riser of steps, skirting, dado etc. over & including 10mm thick rendering (bedding layer) in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and for star case risers Kota stone shall be ixed in one piece upto 1.5m length complete all as specified and directed.

Rounding to edges of stone slabs (Kota / Granite) one edges such as in steps, cooking platform and other similar situations all as specified.

Taking up or down steel water tubing and connections including for re-fixing or removal from site 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel water tubing and connections including for re-fixing or removal from site 20 mm bore of pipe complete all as specified and directed.

S&F steel water tubing (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe complete all as specified and directed.

S&F steel water tubing (medium grade) galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20mm bore of pipe complete all as specified and directed.

S&F in repair 15mm bore stop valve, CP cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed.

S&F in repair 15mm bore bib tap, CP cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed.

S&F in repair 15mm bore angle valve, CP cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed.

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair 1000 ltr capacity rotional molded polythylene water storage tank three layer white triple layer (Cylinderical vertical with closed top , white in colour ) hoisted kand fixed in position including ball valve 20mm bore high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed, (minimum weight 210 gms) complete all as specified and directed.

S&F in repair vitreous china squatting pan (Orissa pattern) water closet (white) size 580x440mm with integral foot rests including connection to trap and flushing pipe antisyphonage pipe etc including provision of PCC (1:7:12) type F2 in filling complete all as specified and directed.

M&L for treatment of sunken floor slab comprising of the following specifications complete all as specified and directed :-

(i) Cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. Provision of 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout.

(ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with and including integral water proofing compound Sika Plastocreat plus or equivalent make in Fosroc / Thermax as approved by GE @ 0.2% by wt of cement consumed including filling it with water to check dampness and seepage and where dampness / seepage is noticed, nozzles shall be fixed and grouting carried out.

(iii)All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty Sikagard 694 F (I) or equivalent make in Fosroc / Thermax as approve by GE.

(iv) After drying putty, wash the slab and sides of sunken portion with water andmake it clear and clean.

(v) Applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or equivalent make in Fosroc / Thermax as approved by GE in two coats @ 3kg/sqm to sandwiched with glass fibre reinforcement : Sika® Fab-1 or equivalent make in Forsro / Thermax as approved by GE over base coat as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion.

(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound SIKA plastocreat Plus or equivalent make in Fosroc / Thermax as approve by GE @ 0.2% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout.( WPC shall be measured & paid separately)

(vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint (Black Japan shall be paid separetely).

NOTE : Item No 25 to 25.07 shall be executed by authorized applicator of manufacturer as approved by accepting officer)

Supply only intergal liquid water proofing compound complete all as specified and directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts wind ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F in repair PVC (SWR) floor trap 75mm bore with grating incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed. .

Taking down shutter of any description area exc 1.5 sqm but not exc 2sqm each including removing from site complete all as specified and directed.

Taking down chowkats or frame with shutter, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each including removing from site complete all as specified and directed.

S&F pressed steel frames prepainted 125 x 60mm for doors with one or more rebates made out of 1.25mm thick PBI sheet including necessary lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F pressed steel frames prepainted 105 x 60mm for doors with one or more rebates made out of 1.25mm thick PBI sheet including necessary lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 (using 12.5mm Graded Stone Aggregate) as in filling of Chowkhats complete all as specified and directed.

S&F factory made Steel windows, ISI marked, (Box Type) with side hung shutters including mild steel butt hinges, tower bolts, handles etc complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including taking down old existing window and making good disturbed surfaces of walls,complete all as specified and directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3. (iii) Glass pane/wire gauze shall be measured and paid separately.

S&F factory made Steel windows, ISI marked, (Box Type) with side hung shutters including mild steel butt hinges, tower bolts, handles etc complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including taking down old existing window and making good disturbed surfaces of walls, complete all as specified and directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3. (iii) Glass pane/wire gauze shall be measured and paid separately.

M&L for mild steel in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm each complete all as specified and directed.

S&F in repair 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm each complete all as specified and directed.

S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reiforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 35mm thick factory made plain framed, paneled shutter made of 2nd class HW (Bonsum/Hollock) of 35 mm thick(two panels)with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and styles as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred breds for securing glass etc sizes of members of shutters as specified in SSR Pt-I Sec 8 Clause 8.20(a) in 2nd class hard wood complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed

S&F in repair Aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F in repair 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F 125 mm extruded aluminium alloy handles ,fabricated type complete all as specified and directed

S&F in repair 125 mm extruded aluminium alloy handles ,fabricated type complete all as specified and directed

S&F in repair 20mm dia mild steel PVC coating decorative type curtain rod MS chromium plated with decorative type sides cups and brackets all as specified complete all as specified and directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel all as specified complete all as specified and directed.

S&F Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair Galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F for preparation of newly plastered surface of wall and applying two coats of OBD of any tint over one coat of chalk whitening complete all as specified and directed.

M&L for complete removing existing treatment and preparation of plastered surface of wall and applying two coats of OBD of any tint over one coat of chalk whitening complete all as specified and directed.

M&L for preparation newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation old decorated plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L for preparation of new wood or wooden based material surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint of any tint over one coat of pink primer, complete all as specified and directed.

M&L for preparation of old painted wood or wooden based material surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint of any tint complete all as specified and directed.

M&L for preparation of new steel or iron surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint of any tint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of steel or iron surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint of any tint over existing priming complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint of any tint over one coat of primer complete all as specified and directed.

M&L for preparation of old decorated plastered surfaces of wall and applying two coat of cement base paint of any tint complete all as specified and directed.

M&L for 50mm thick, cement concrete 1:3:6 type C1 using 20mm graded crushed stone aggregate as in plinth protection, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

M&L for cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate) over chajja coving at junction surface finished even and smooth without using extra cement complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors dia of pipe 110mm complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors dia of pipe 75mm complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls with suitable mild steel clamps dia of pipe 110mm complete all as specified and directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls with suitable mild steel clamps dia of pipe 75mm complete all as specified and directed.

S&F in repair 110mm dia PVC (SWR) bend any radius with oval access door complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) bend any radius with oval access door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) single junction (single 'T' ) equal or unequal provided with access door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches pillars etc and removing rubbish complete all as specified and directed.

M&L for brick work with fly ash Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

S&F in repair PVC valveless syphonic type of 10Ltr capacity flushing cistern with inlet , ball valve and handle including PVC flush pipe of 32mm dia complete all as specified and directed

Demolition mud in roofs, any thickness,including plastering and leeping (whether full thickness removed or only a part thereof) and removing rubbish complete all as specified and directed.

Demolitin of Brick tiles or terracing tiles, single layer on roofs and removing rubbish complete all as specified and directed.

M&L for cement concrete 1:2:4 mix type B-0 (12.5 mm graded stone aggregate) in padding finishing surface of concrete topping even and fair (without using extra cement) all as specified of average thickness 50 mm in slope 1:40 over roof complete all as specified and directed.

M&L for applying roof treatment on top of roof with APP based polymeric membrane (not less than 3mm thick , weight not less than 3.5Kg per Sqm, reinforced with polyster non-woven fabric ( weigthing not less than 150 gm/ Sqm ) laid by torch application method with side overlap 75mm and on end 100mm as per manufacture's instructions over a coat of hot paving bitumen of grade 30/40 conforming to IS 73 @ 1.2 Kg/ Sqm over a coat of bituminous primer conforming to IS -1984 @ 0.40 Kg /Sqm and applying two coats of aluminium paint over APP membrane over and incl 15mm thick plaster in cm 1:4 using liquid WPC as per manufacture instruction over RCC roof complete all as specified and directed

S&F in repair 15mm dia pipe gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed

S&F in repair 20mm dia pipe gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F floor door stopper of aluminium alloy body size 75 mm with two rubber shoes complete all as specified and directed.

S&F in repair salt glazed stone ware gully traps in repairs square or rounded mouthed type P or S of size 150 x 150cm incl excavation earth work conc in Beds, surrounds kerbs etc complete.

S&F mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed stoneware, AC or reinforced concrete pipes) 200mm internal dia set in cement mortar complete all as specified and directed.

S&F salt glazed stoneware drain pipes as per IS-651 200mm dia laid in trenches and jointed in cement complete all as specified and directed.

M&L concrete bed in PCC 1:4:8 type D-2 to drain pipes of 200 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed..

M&L for form work to rough finished flat surfaces of RCC members etc complete including edges complete all as specified and directed..

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia. complete all as specified and directed.

Ditto as per item No 90 above but for 5mm dia and over upto and incl 10mm dia in stirrups, spacers and binders.6 to 8mm dia -ditto-.

M&L for providing precast cement concrete type B-I 1:2:4 using 20mm graded crushed stone aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face set in cement mortar 1:4 complete all as specified and directed.

M&L for weld-mesh of size 75x75x3mm to be wrapped on the exposed surface of rib of beam & on the slab bottom and tack welding to the exposed reinforcement at close intervals and gunite with cement mortar 1:3 mixed with admixture SIKA Plasto creat plus or equivalent make in Fosroc / Thermax as approved by GE around rib of beam or roof slab of thickness n.exc 40mm to be applied under an operating pressure. the gunited surface to be cured properly for a min of 7 days all in complete as per the technical specifications and manufacturer's instructions and directed by Engineer-in-charge.

Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using Product : Rustoff-100 of Sika or equivalent make in Fosroc / Thermax as approved by GE, with density : 1.01 Kg/ltr at 30°C and consumption : 0.2 kg/Sqm/coat complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar

Supply and apply cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption : 3.75 kg/Sqm for two coats and product requirements: carbonation resistance : 2 mm of SikaTop Armatec®-108 of Sika or equivalent make in Fosroc / Thermax as approved by GE corresponds to 20 mm of normal mortar; bond strength > 1N/Sqmm according to ASTM C 882-78 complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar.

M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete substrate in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed.

M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness of upto 10mm to the prepared concrete substrate in soffit of slabs, beam, columns, parapets, fins and facias at any height including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructionscomplete all as specified and directed.

S&F in repair vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets, waste fittings, PVC waste pipe and 15mm pillar tap cast copper alloy with capstan head chromium plated complete all as specified and directed

M&L for Rough cast plaster as specified .(Rendering coat not less than 10mm thick in C:M 1:3 , while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg size 6 to 12mm mixed with coarse sand and cement in the ratio of 1:1:1 shall be applied and finished even) on external wall upto cill height complete all as specified and directed.

Taking down carefully copper/aluminum point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed.

M&L for point wiring for one light / bell / Ceiling fan/Exhaust Fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FRLS drawn through rigid PVC coduit 20 mm dia medium grade and conduit accessories concealed type in walls/ceilings and including change of steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch on the same board with other switch or independent including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FRLS connected to common earth dolly complete complete all as specified and directed. (Note :- Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).

All as per item No. 101 above but for one 5 pin 5 Amp socket outlet on independent board controlled by one number one way switch on independent board.

All as per item No. 101 above but for one 5 Pin 5 Amp socket outlet on the same board controlled by one number one way switch on same board.

All as per item No. 101 above but for 15 Amp socket out let by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent board including provn of 2.50 Sqmm unsheathed, multi stranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed.

S&F flush type socket outlet multipurpose 3&6 Pin, 15 Amp 230 volts AC complete all as specified and directed.

S&F flush type socket outlet multipurpose 2&3 Pin, 5/6 Amp 230 volts AC complete all as specified and directed.

S&F switch piano flush type, single pole, one way, 5/6 Amp, 230/240 Volts grade complete all as specified and directed.

S&F switch piano flush type, single pole, one way, 15 Amp, 230/240 Volts grade complete all as specified and directed.

S&F Lamp holder of PVC / Polycarbonate type surface with 9 watt LED bulb complete all as specified and directed.

S&F ceiling rose surface bakelite, 3 terminals with back plate etc complete all as specified and directed.

S&F in replacement LED tube light fitting 18W metallic frame /batten, Retro, Box type surface and wall mounted, including LED tube light rod , high efficiency including making connection, complete all as specified and directed.

S&F Ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed.

S&F MCCB 63 Amps 3 pole 16 KA, 415 Volts DB enclosure, including taking down of u/s MCB complete all as specified and directed.

S&F in replacement Sheet metal enclosures MCCB VTPN way with 200 Amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar __ protection 43 having door earthing complete and all as specified and directed

S&F in replacement Sheet metal enclosures for DBs when MCBs to be used Single pole and neutral (SPN 240 Volts) with 200 Amps rated copper busbar 8 way double door complete and all as specified and directed

S&F MCB SP, 2 to 5 Amps 240 Volts , type 'B' curve, 10 KA, fixing in DB complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps 240 Volts , type 'B' curve, 10 KA, fixing in DB complete all as specified and directed.

S&F MCB SPN, 32 to 40 Amps 240 Volts , type 'B' curve, 10 KA, for fixing in DB complete all as specified and directed.

S&F in replacement Sub main wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 4 sqmm, 1100 votls grade drawing through and including PVC casing and caping with acessories and including PVC insulated 4 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and directed. (Note:- Two lengths of 4 Sqmm cable, one length of 4 Sqmm cable and one length of PVC casing and caping will be measured as one length).

S&F Sub main wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 4 sqmm, 1100 votls grade drawing through and including PVC casing and caping with acessories and including PVC insulated 4 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly complete all as specified and directed. (Note:- Two lengths of 4 Sqmm cable, one length of 4 Sqmm cable and one length of PVC casing and caping will be measured as one length).

Supplying laying, jointing, testing and commissioning of LT UG XLPE insulated screened PVC beded galvanised steel strip or wire armoured electric power cable (heavy duty) with aluminium conductor 1100 volts grade of size 16 sqmm 4 core including taking down old U/S cable complete all as specified and directed. (Note :- cable may be laid in trenches, under road, across the nallah, along poles/walls and in ducts etc . Eexcavation, earhtwork, sand cushioing, cable cover, pipe for cable protection to be measured and paid for separtely) complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out and getting out in soft/ loose complete all as specified.

Returning filling with earth obtained from excavation including spreading, consolidation in layers not exceeding 15 cms thick, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for Sand filling in trenches with clean dry fine sand unwashed 8cm thick below cable and 15 Cm thick after laid thincluding gently punning around cables complete all as specified and directed Note : 18cm punned thickness shall be measured and paid

M&L for bricks covering to under ground cable using sub class B bricks laid dry, flat, perpendicular to the direction of the cable complete all as specified and directed.

M&L for replacement of 40 mm bore GI pipe light grade laid in trenches or fixed to wall/pole for protection of cable/earthing strip etc complete all as specified and directed.

S&F in replacement LED street, light fitting of capacity 25 watt , SPD 10KV internal with lence, 240 volt , pressure die cast aluminium housing frame, heat resistant toughtened clear glass with frame with accessories , IP 66 protection prewired and making connection complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/ equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore upto 7.50 metre long GI pipe light grade for earth wire protection fixed with poles/wall with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed including dismantling & taking out old existing unserviceable earthing.

S&F in repair sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a 2 pin and earth plug and socket complete with one single pole MCB of 20 Amp 10KA type 'B' series 240 volts complete all as specified and directed.

S&F geyser BEE 5 star rating consisting of stainless steel water storage tank of capacity 25 ltr with syphon assembly, hearing element, 1.5 KW thermo state, presser realse valve, inlet outlet, indicator including writting MES No, nut bolts, grouting and making water and electric connections complete all as specified and directed. Note : PVC connection pipe shall be issued under respective item as supply only.

S&F PVC connections for cold water heavy duty 15 mm size with brass nuts jounts washers of length 450 mm complete all as specified and directed.

S&F PVC connections for hot water heavy duty 15 mm size with brass nuts jounts washers of length 450 mm complete all as specified and directed.

S&F 15mm dia pipe gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 15mm bore bib tap, CP cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed.

Taking down and re-fixing, cleaning servicing oiling, greasing & painting after adjoining of civil work ceiling fan any make or any size with down rod with suitable length complete all as specified and directed.

SHRI HARI BUILDERS

m/s Rajesh Kumar

B B BUILDERS

M/S RAJINDER SINGH

VERMA BROTHERS