Providing access through NTR marg to the Recreational Plaza (Amogham) by removing the existing footpath and railing and providing MS gate with boundary wall at parking area infront of the TG secretariat

BLD-CSTN-2-2 (10): Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means.

Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately etc, complete for finished item of work as per Technical Specification Clause 202 MORD / MORTH and including all incidental, labour charges, overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge.

Dismantling/Removing of tiles/paver blocks inclusive of labour charges etc., complete for finished item of work and overheads & contractors profit complete excluding cost of seigniorage charges etc., complete for finished item of work as directed by the Engineer in charge.

Carting away the surplus excavated earth/dismantled material/unwanted debris etc, from the work site with a lead of 10.0 km including initial lead including all incidental, labour charges, overheads and contractors profit and also loading& unloding and conveyance etc. Complete for finished item of work and as directed by Engineer in charge.

Removing of ornamental cast iron grills carefully without damage including labour charges, all operational, incidental charges etc, complete for finished item of work as directed by Engineer-in-charge.

ReFixing of ornamental cast iron grills for railing fixed in existing RCC foundation including labour charges, all operational, incidental charges and labour charges for fixing and erecting and fixing in position by using chain pulley blocks, Derek pole aggangements and cranes etc including overheads and contractor's profit complete for finished item of work as directed by Engineer-in-charge.

Hiring of jack hammer for dismantling of floor tiles, wall tiles, chipping etc, including hire charges of machinery, crew charges etc, complete for finished item of work as directed by the Engineer-in-charge.

Hiring of Compressor, including hire charges of machinery, crew charges etc, complete for finished item of work as directed by the Engineer-in-charge.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying etc., including all incidental, labour charges, overheads and contractors profit etc, complete for finished item of work and as directed by Engineer in Charge. ( APSS No.126)

Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) under foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, all charges for machine mixing, laying concrete in foundations and under flooring bed, finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402)

Coarsed Rubble Stone Masonary 2nd sort in CM 1:6 using selected size stones including bond stones from approved quarry including cost of all materials at site like cement, sand, stones, water etc to site including seigneorage charges sales and other taxes on all materials all operational incidentals and labour charges including dressing of stones to required sizes, curing etc complete for finished item of work and as directed by Engineer In Charge.

BLD-CSTN-3-14-(31) - A : Supply and placing of Reinforced Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 380 kgs per 1 cum of concrete using WEIGH BATCHER / MIXER with 20mm and down size graded machine crushed hard Granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (50:50) coarse aggregate, water etc., to site, centering using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates, etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing and cost of overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges, seigniorage charges etc, complete for finished item of work. for PLINTH,

Supply, fabrication and fixing of Mild Steel rectangular/square/circular hollow section of specified size for Heavy structures including cost of welding rods, power charges, Labour charges for erecting & fixing, cutting, placing, welding and erecting in position and fixing etc, including cost & conveyance of all materials, wastage, all operational, incidental charges, overheads & contracors profit etc, complete for finished item of work and as directed by Engineer In Charge.

Supply, fabrication and fixing of Mild Steel angular sections, I sections, of specified size for Heavy structures including cost of welding rods, power charges, Labour charges for erecting & fixing, cutting, placing, welding and erecting in position and fixing etc, including cost & conveyance of all materials, wastage, all operational, incidental charges, overheads & contracors profit etc, complete for finished item of work and as directed by Engineer In Charge.

Supply and placing of the M-10 Design Mix Concrete by ready mix, mixed in a batching/mixing plant as per approved mix design, cement content not to be less than 220Kg/Cum with crushed stone coarse aggregate of 20 mm and 10 mm nominal sizes graded, with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, concrete strength not to be less than 10 Mpa at 28 days, including cost and conveyance of all materials like cement, sand, coarse aggregate, water, centering etc., to site, all labour charges for mixing, transported to site by transit mixer, pumping and laying concrete, centering and vibrating, curing and finishing etc. complete, excluding seigniorage charges and including scaffolding charges etc., for finished item of work, Manufactured Sand (Rock sand) and natural river sand in the ratio of 50:50 shall be used. complete for finished item of work as directed by Engineer-in-charge.

Construction of M25 grade cement concrete pavement, over a prepared sub base, with 53 grade cement or any other type as per Clause 1501.2.2, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including admixtures as approved, Vaccum Drying of freshly laid cement concrete floor using 100% air tight suction mat of suitable Size and length, curing, curing compound (where specified) and water finishing to lines and grade as per Technical Specification Clause 1501 MORD, including contractor's profit and overhead charges, excluding seigniorage charges, complete for finished item of work as directed by Engineer-in-charge. RBR-CCPV-5

Vaccum drying of freshly laid cement concrete floor using 100% air tight suction mat of suitable size and length, vaccum pump to maintain vaccum pressure 0.70-0.80 atmospheres as per the standard procedure floting with powerfloater, mechanical trawelling, finishing with sound edges and camers including hire and operational charges of machinery, etc. Complete for finished item of work and as directed by the Engineer-in-charge.

BLD-CSTN-12-12-(193): Painting to new iron works with 2 coats of ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including cost of overheads & contractors profit for finished item of work for:-Painting to Iron work - Synthetic enamel paint to New Iron Work - 2 coats . (APSS No. 1201, 1207 & 1212).

Manufacture, Supply, & Delivery of 75mm Dia of PVC PIPES & FITTINGS (Materials shall be procured from the stores anywhere in T.G, excluding Taxes.

Engaging Labour for cleaning and carting away the dismantled material and other debris from the site to nearest dumping yard including loading, unloading, carting away etc from the site to suitable location etc complete for finished item of work and as directed by Engineer in charge.

Engaging Tractor for carting away of dismantled material, debris, doors, windows, electrical items and other material etc including crew, oils, conveyance of machinery to site and all other incidental charges. complete for finished item of work and as directed by Engineer in charge