wiring of weighbridge number 6 newly extended first floor two number rooms also wiring and power arrangement earthing arrangement for newly constructed 100 tone weighbridge near WB 11 and 12 under Magadh OCP,M-S Area

Amount

Wiring for light point/ fan point/ exhaust fanpoint/ call bell point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable insurface / recessed steel conduit, with modular aswitch, modular plate, suitable GI box andearthing the point with 1.5 sq.mm FRLS PVCinsulated copper conductor single core cable etc.as required.

Supplying and fixing suitable size GI box withmodular plate and cover in front on surface or inrecess, including providing and fixing 6 pin 5/6 &15/16 A modular socket outlet and 15/16 Amodular switch, connections etc. as required.

Wiring for circuit/ submain wiring alongwith earthawire with the 2 X 1.5 sq. mm + 1 X 1.5 sq. mmearth wire sizes of FRLS PVC insulated copperaconductor, single core cable in surface/ recessedamedium class PVC conduit as required.

Wiring for light/ power plug with 2X4 sq. mm FRLSPVC insulated copper conductor single core cable in surface/recessed medium class PVC conduitalongwith 1 No. 4 sq. mm FRLS PVC insulatedcopper conductor single core cable for loopaearthing as required.

Supplying and fixing two module stepped typeelectronic fan regulator on the existing modularplate switch box including connections butexcluding modular plate etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V,10 kA, "C" curve, miniature circuit breaker singlepole and neutral for inductive load of followingpoles in the existing MCB DB complete withconnections, testing and commissioning etc. asrequired

Supply of wall mounted fan 450 mm

Supply & fixing of Single phase copper lightning Arrester

Providing and fixing following rating and breakingcapacity MCCB with thermomagnetic release andterminal spreaders in existing cubicle panel boardincluding drilling holes in cubicle panel, makingconnections, etc. as required.100 A, 16KA,TPMCCB

Supplying and fixing following way, single pole andneutral, sheet steel, MCBdistribution board, 240volts, on surface/ recess, complete with tinnedcopper busbar, neutral bus bar, earth bar, din bar,interconnections, powder painted includingearthing etc. as required. (But without MCB/RCCB/Isolator)6 way, Double door

Earthing with copper earth plate 600 mm X 600mm X 3mm thick including accessories, andproviding masonry enclosure with cover platehaving locking arrangement and watering pipe of2.7 metre long etc.with charcoal/coke and salt asrequired.

Providing and fixing 4.00 mm dia copper wire onsurface or in recess for vloop earthing as required.

Supply and fixing of Onload Manual switch disconnector changer with sheet steel enclosureType- CO11000OOOO, 100 Amp

Supply and fixing of 5 kva stabiliser 130 to 270 v range

Supply and fixing of 2 kva Inverter

Supplying and laying 25 mm X 5 mm G.I strip at0.50 metre below ground as strip earth electrode,including connection/ terminating with G.l. nut.

Supply of 50 mm dia GI Pipe (medium class)

Erection of metallic pole of length above 10 mtrand upto 12 mtr in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Erection of ACSR conductor of 7/3.35 mm to7/4.00 diameter and apove including binding etc.as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm(7.14 kg per metre) cross arm for 4 wire over headline complete with clamps, bolts, nuts and washeretc including drilling of holes for insulator pins etc(as per drawing) and painting with primer andfinished paint as required.

Erection of angle iron/channel iron cross arm on21wood/RCC/PCC/steel tubular or Rail pole for 4 wire system.

Suppiying and erection of 100 mm X 80 mm pininsulator complete with G. I. Spindle and nuts etc. as required.

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres longstay rod, anchor plate of size 45 cm X 45 cm X 7.5mm, thimble, stay clamps, bow tightener, 7/3.15mm dia G.I. stay wire and strain insulator etc incement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size)foundation inciuding excavation and refilling etc. as required.

Supply of 4 core 16 sq mm alluminium armoured cable

Total impact of GST for the purpose of CTC

M/S HEMANT KUMAR YADAV

M/S RABINDRA KUMAR