Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.1 LAccepted-AOC SIMULBARI T E PO VILL SIMULBARI PS KURSEONG DIST DARJEELING PIN 734009 WEST BENGAL | SIMULBARI | DARJEELING | WEST BENGAL | 734009 | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹45.5 L+₹50,671.30 (1.13%)Rejected-Finance AMRITBASTI GARIGHURA PO SHIMULBARI PS KURSEONG DIST DARJEELING WB PIN CODE 734409 | 734409 | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹45.6 L+₹53,755 (1.19%)Rejected-Finance DESHBANDHUPARA PO SILIGURI TOWN DIST DARJEELING PIN 734004 | JALPAIGURI | WEST BENGAL | 734004 | L3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | L4₹45.8 L+₹72,183 (1.60%)Rejected-Finance EAST VIVEKANANDA PALLY MANGAL PANDEY SARANI PO RABINDRA SARANI SILIGURI 734 006 WB | JALPAIGURI | WEST BENGAL | 734006 | L4 | Rejected-Finance NOT LOWEST BIDDER | |
| 5 | L5₹45.9 L+₹87,620 (1.95%)Rejected-Finance | L5 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹41.9 L
EMD Value
₹83,800
Closing Date
27 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Sukna
Garrison Engineer Sukna, Post-Simulbari, Dist.-Darjeeling, WB-734009
SPL REPAIR TO BLDG NO SP 50 AT TRISHAKTI LIBRARY AND CERTAIN OTHER SANCTIONED WORKS IN SUKNA MIL STATION UNDER GE SUKNA
2023_MES_583750_1
GE Sukna/8513
Open Tender
Civil Works
Works
270 days
Sukna
AS PER TENDER
8 documents required · 8 mandatory
₹500
GE Sukna
₹83,800
Yes
31 Mar 2023
2 Mar 2023
28 Mar 2023
2 Mar 2023
27 Mar 2023
20 Mar 2023
3 Mar 2023 - 21 Mar 2023
Amount
BOQ Part-I (B/R Work)
Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning filling in and ramming earth in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good in soft/loose soil complete all as specified and directed.
M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.
Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.
Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.
Taking down chowkats or frame n.exc 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
Taking down chowkats or frame exc. 1.5 Sqm but not exc. 4.0 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
S & F of Pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc.and including P.C.C. (1:3:6) for filling in frame and fixing of hold fast, and applying two coats of synthetic enamel paint over one coat of red oxide primer etc.complete all as specified and directed. Make:- AVA Steel Industries / M/s AGEW Steel manufacturers Pvt Ltd / M/s Ajanta Ispat Pvt Ltd Siliguri Make of synthetic enamel paint:- Apcolite Premium Gloss Enamel (Asian) / Luxol High Gloss Enamel (Berger) / Superlac Premium High Glass Enamel (Shalimar Paints Ltd) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple, bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries
S&F rolled mild steel in plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W (Gde-E-250) quality-A complete all as specified and directed.
S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, etc conforming to Fe - 410 - W (Gde E - 250) Quality - A complete all as specified and directed.
S & F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe – 290 Gde E -- 165 complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any guage, thickness including nanital or similar pattern roof coverings complete all as specified and directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd / Prestar Infrastructure Projects Ltd.
S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm TCT (total coated thickness) of any colour having tensile strength of 550 Mpa as in roof covering cladding to wall etc, fixed with self tapping screws complete all as specified and directed. Make:- Colour Roof (India) Ltd / TATA Bluescope Steel Ltd / Dyna Roof / Bhushan Power & Steel Ltd / Prestar Infrastructure Projects Ltd.
Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L 20 mm thick granite slab(of any type) tiles machine cut, bedded jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing & over & including 15 mm thick screed bed in CM 1:4, complete all as specified and directed.
S & F factory made Solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part – II (2010) complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top rails & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement as per specification complete all as specified and directed. Make:- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
M & L for brick work with sub class ‘B’ old size bricks straight or curved on plan exc. 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L brick work with fly ash brick, straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and as directed. Make :- ICL Concrete Industries / Vaishnodevi Buildcon Private Ltd / Koshi Brick Industries Pvt Ltd / Shankar Oil & Saw Mills
M&L brick work with sub class 'B' bricks straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall and including provision of 02 Nos. 8 mm dia TMT bars in full length of wall at every fourth course complete all as specified and directed.
M & L double charged premium quality coloured vitrified ceramic tiles 10mm thick (square/rectangle) polished area of each tiles not exc. 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed white or coloured cement to match, laid over including screed bed or bedding layer of mortar 20mm thick laying floor tiles in cement mortar 1:6 finished even and rough complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
M & L double charged premium quality coloured vitrified ceramic tiles 10mm thick (square/rectangle) polished area of each tiles not exc. 0.36 Sqm in vertical surface in skirting etc set and jointed in neat cement slurry and pointed white or coloured cement to match including 10mm thick laying floor tiles in cement mortar 1:3 finished even and rough complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 20 mm thick in CM 1:6 acomplete all as specified and directed. Make:- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) / Orient Bell Ltd / H & R Johnson India Ltd
M&L coloured glazed ceramic tiles 350 x 250 x 7 mm/450x350x7 mm thick as in dado / skirting and vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in CM 1:3 including roughening of surface complete all as specified and directed. Make :- M/s Asian Granito India Ltd. / M/s Somany Ceramics Limited / M/s Varmora Granito Pvt Ltd / M/s OASIS Vitrified Pvt Ltd / M/s Sunshine Tiles Co (P) Ltd (Tiles) /Orient Bell Ltd / H & R Johnson India Ltd
M&L for prepolished cement concrete chequered tiles 300 x 300 x 25 mm thick as in floors, set and jointed over and including 15mm thick screed bed in CM 1:4 and pointed in grey cement and pigments to match the colour of tile complete all as specified and directed. Make : Lovely / Anjali / Ultra / Bansal / Nitco / Multiwyn
M & L for Hardcore of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.
M & L for plain cement concrete, 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
M&L 75 mm thick, PCC 1:3:6, type C-2, (using 40 mm graded crushed stone aggregate) as in floors, paths, plinth protection, hardstanding etc, finished even and fair without using extra cement complete all as specified and directed.
Taking down cement plaster on brick or concrete surfaces / ceiling, racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L 15 mm thick rendering in CM 1:6 on other than fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and directed.
M&L 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface using water proofing compound as per manufacturers instructions finished even and smooth without using extra cement complete all as specified and directed. Note:- WPC shall be measured and paid separately.
Supply only integral water proofing compound complete all as specified and directed.
M&L 100 mm thick, PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base etc, complete all as specified and directed.
M&L 25 mm thick PCC 1:2:4, type B-0 (using 12.5 mm graded crushed stone aggregate) laid above PCC sub floor / correction layer /under layer complete all as specified and directed.
S & F of 100 mm long Aluminium butt hinges, complete all as specified and directed.
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement. complete all as specified an directed.
S&F 12 mm thick (minimum) toughened glass with stainless steel clips as in railings, doors, partition etc, and including design etching work, necessary hinges, handles, clips etc, complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington
S&F 4.8 mm thick tinted glass and glazing with oil putty / wooden beads in square n.exc 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington
S&F 4.8 mm thick tinted glass and glazing with oil putty / wooden beads in square exc 0.50 sqm in each pane complete all as specified and directed. Make:- Asahi India Glass Ltd. / Saint Gobain / Modiguard / Triveni Float / IAG / Hindustan Pilkington
S&F in repair decorative curtain rod of wooden finish double brackets support for holding curtain rods and corner to fixed to ends of curtain rod including rings fixing with screws complete all as specified and directed.
S&F in repair decorative curtain rod of wooden finish powder coated of 28mm dia including six nos. curtain rings per running mtr complete all as specified and directed.
S&F in repairs door closer hydraulically regulated aluminium (die cast) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. Make :- Hardwin / Godrej / Doorset
S&F mild steel flat iron/ angle iron for post and strut in fencing including cutting top to shape as direced drilling holes notching for wire etc including all necessary riverting etc complete all as specified and directed.
Supply only chain link MS galvanized fencing, any size or type complete all as specified and directed.
Supply only PVC coated chain link fencing with 2.70mm dia GI wire of mesh size 50x50 mm complete all as specified and directed.
Fixing only chain link in repairs fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc, and including provision of binding wire including taking down complete all as specified and directed.
S&F galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, including taking down complete all as as specified and directed (each line wire to be measured).
S&F Mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexoganal or square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut, exc. 10 cm but not exc. 15 cm long complete all as specified and directed.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as per Sl item No. 1.55 above but 5 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders.
M&L mild steel round bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
S & F of 125 mm long (Length of bolt) Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed.
S & F of 150 mm long (Length of bolt) Aluminium anodised barrel tower bolts, of extruded section complete all as specified and directed.
S & F of 150 mm long Aluminium handles, cast type, anodised complete all as specified and directed.
S&F in repairs 150 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. Make:- M/s Aluminium Udyog (Global) / M/s Trisul Industries / M/s Argent Industries
S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F of 35 mm thick flush shutter solid core construction, with MDF board core and plywood face panels, commercial type on both faces complete all as specified and directed.
M&L for preparation of new wall surfaces and including applying two coats of oil bound distemper over a coat of cement primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. Make of oil bound distemper :- Apcolite Premium Emulsion (Asian Paints ltd)/ Rangoli (Berger) / No. 1 Premium Acrylic Distemper(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L complete removal of existing treatment of old decorated wall surfaces and including applying two coats of oil bound distemper over a coat of cement primer and over a thin layer of wall care putty to obtain smooth finish complete all as specified and directed. Make of oil bound distemper :- Apcolite Premium Emulsion (Asian Paints ltd)/ Rangoli (Berger) / No. 1 Premium Acrylic Distemper(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L preparation of old plastered wall surfaces and including applying two coats of cement base paint complete all as specified and directed. Make of cement base paint: Durocem Neo(Berger)/ Utsavcem (Asian Paints Ltd)/ Cemkote plus water proof cement paint(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed. Make of cement base paint: Durocem Neo(Berger)/ Utsavcem (Asian Paints Ltd)/ Cemkote plus water proof cement paint(Shalimar) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L preparation of new steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make of synthetic enamel paint:- Apcolite Premium Gloss Enamel (Asian) / Luxol High Gloss Enamel (Berger) / Superlac Premium High Glass Enamel (Shalimar Paints Ltd) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
M&L preparation of old steel surfaces of any description, not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make of synthetic enamel paint:- Apcolite Premium Gloss Enamel (Asian) / Luxol High Gloss Enamel (Berger) / Superlac Premium High Glass Enamel (Shalimar Paints Ltd) Make of primer/ wall care putty:- Asian Paints/ Berger / Shalimar Paints
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed.
M&L decorative type plaster of paris work of size not less than 50 mm x 50 mm, as in cornice or junction of wall and ceiling complete all as specified and directed.
S&F 10 mm thick PVC insulation panel with EPS stuck to 1 mm plain PVC sheet suitably placed in false ceiling including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel at 457 mm centre to centre and necessary hangers 6 mm dia GI fixed to roof complete all as specified and directed. Make of GI Grid- M/s Saint-Gobain Gyproc India Pvt Ltd / M/s USG Boral Building Products (India) Pvt Ltd / M/s PR Ceiling Products Make of PVC Insulation Panel :- Rajshri Plastiwood Ltd / M/S Polyline Extrusion Pvt Ltd / M/s Navratan Specially Chemicals Ltd
S&F 300 mm, ordinary rat tail rod pattern springs and including roller and roller plate complete all as specified and directed.
S&F powder coated aluminium anodised door, window, cup board and ventilator shutter and frame any type (sliding or openable) with frame and either similar work, fabricated aluminium mesh etc, aluminium heavy section fabricated including all necessary roller wheels, cleats, handle, locking arrangement and arrangement to fix wire mesh with aluminium channel beading and stainless steel screw including cost of rubber gasket, beading roller wheels etc,complete all as specified and directed. Make:- M/s Halco Aluminium Extrusion / M/s Bhagwati Sai Metal Alloys / M/s Argent Industries Note: (a) The weight of rubber gasket beading, roller wheels, etc will not be measured with the weight of aluminium shutters as only aluminium items shall be measure. (b) Wire mesh shall be measured and paid separately. (c) Aluminium hinges shall be included in the unit rate
S&F powder coated aluminium (minimum thickness of powder coating not less than 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make confirming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber / neaoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, C.P brass/ stainless steel screws, all complete as per architecrural drawings and the directions of Engineer-in-Chief. Make:- M/s Halco Aluminium Extrusion / M/s Bhagwati Sai Metal Alloys / M/s Argent Industries
BOQ Part-II (E/M Work)
M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch and including cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces and including taking down complete all as specified and directed. Make of cable:- Havells /MESCAB/ Polycab /Phinolex Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
All as per item No. 2.01 here-in-before but 1.5 Sqmm copper conductor for 3pin 5 Amps socket outlet independent controlled by one switch with one No. earth continuity copper conductor of size 1.5 Sqmm complete all as specified and directed
All as per item No. 2.01 here-in-before but 1.5 Sqmm copper conductor for 3pin 5 Amps socket outlet same board with other switches with cable 1.5Sqmm size complete all as specified and directed
All as per item No. 2.01 here-in-before but 1.5 Sqmm copper conductor for 3pin 15 Amps socket outlet independent (multiple) controlled by one switch with one No. earth continuity copper conductor of size 2.5 Sqmm complete all as specified and directed
S & F Modular type switch piano 6 Amps single pole one way one module all as specified and as directed. Make :- Havells / Anchor / Legrand /C&S
S & F Modular type switch piano 16 Amps single pole one way one module for 16A independent complete all as specified and as directed. Make :- Havells / Anchor / Legrand /C&S
S & F modular type Socket outlet 6 Amps 2/3 pin combined 2 module complete all as specified and as directed. Make :- Havells / Anchor / Legrand /C&S
S & F modular type Socket outlet 16 Amps-2/3 pin combined 2 module complete all as specified and as directed. Make :- Havells / Anchor / Legrand /C&S
S & F modular type electronic fan regulator flush type 230V, AC, 50 Hz not less than 100 W complete all as specified and as directed.
M&L for MCB SP 6A-20A, 230V, 50 Hz, compatible for DIN rail "C" series In accordance with IS/IEC 60898-1-2002, 240 V, 50 Hz, 10 kA Suitable for Inductive loads complete with connection complete all as specified and as directed. Make: -C&S/Havells/L&T/ABB/Schneider
M&L for MCB SPN 32A, 230V, 50 Hz, compatible for DIN rail "C" series In accordance with IS/IEC 60898-1-2002, 240 V, 50 Hz, 10 kA Suitable for Inductive loads complete with connection complete all as specified and as directed. Make: -C&S/Havells/L&T/ABB/Schneider
Supply and fix in replacement MCB protected POWER UNIT with one 25 amps socket, (incl 3 Pin Plug Top) including MCB DP and starter 25 Amps rating with six module plate and flush PVC box and electrically connecting up fixed complete all as specified and directed. Make Havells cat No- DHDUCDP0253016-25 (25 Amps) OR equivalent model in L&T / Panasonic / Hager / ABB / Legrand / Indo Asian
Supply and fixing in replacement distribution board (DB) SPN 12 ways, with neutral and earth bus bar 200 A rating 230 Volts, single door, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed by the Engr-in-Charge. Make: - C&S/Havells/L&T/ABB/Schneider
M &L for sub main wiring with PVC insulated (FR-LSH) cable standard copper conductor 1100 volts grade with two run of of size 2.5 sqmm multistrand unsheathed (Red/yellow blue colour cable used for live connection & Black colour cable used for neutral connection) and one run of 2.5 sqmm copper multistrand conductor 1100 volts grade PVC insulated (Green colour cable used) cable for earth continuity wire connected from main earth through PVC casing capping/PVC concealed conduit of size 25 mm for including of all accessories and including taking down complete all as specified and directed. Note : i) Three runs of 2.5 sqmm cable with conduit pipe / casing caping shall constitute one unit Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
M &L for sub main wiring with PVC insulated (FR-LSH) cable standard copper conductor 1100 volts grade with two run of of size 4.0 sqmm multistrand unsheathed (Red/yellow/blue colour cable used for live connection & Black colour cable used for neutral connection) and one run of 4.0 sqmm copper multistrand conductor 1100 volts grade PVC insulated (Green colour cable used) cable for earth continuity wire connected from main earth through PVC casing capping/PVC concealed conduit of size 25 mm for including of all accessories complete all as specified and directed. Note : i) Three runs of 4.0 Sqmm cable with conduit pipe / casing caping shall constitute one unit Make of cable:- Havells / KEI / Polycab / RR Kabel Ltd. / HPL Make of PVC Conduit:- Richa Cables / AKG Industries / Harsh Electro Systems / Panasonic (Anchor)
S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed. Make:- L&T / ABB / Legrand / C&S
M&L earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground in vertical position (earth pit not less than 2.25 m deep below the normal ground level) with top edge of the earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire of 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel, all as shown in electrical plate No. 3 connected to earthing test point and including dismantling complete all as specified and directed. Note:- The unit rate shall also include for earth work in any type of soil, PCC 1:3:6 type C1 chamber, RCC 1:1.5:3, type A1 cover slab, 50 mm thick reinforced with 8 mm dia TMT bar @ 140 mm C/C both ways, 10 mm dia plain bar lifting handle embedded in cover slab, 20 mm bore medium grade GI watering pipe, 15 mm bore GI light grade earth lead protection pipe, funnel, wire mesh, copper lugs, charcoal and common salt in alternate layer etc.
S&F in replacement LED street / security light fitting 1 x 20 watt, integrated type with high efficiency electronic driver, pressure die cast aluminium housing & PC diffuser, Lumen Efficacy 100 Lm/Watt (minimum), colour temperature 5700K (minimum), CRI 70 (minimum), IP-65 (minimum), PF 0.90 (minimum), THD 10% (Maximum), in-built surge protection 5 KV (minimum) internally prewired and including electrically connecting with twin core twisting flexible cord of 0.75 sqmm copper conductor cable & all other necessary fixing accessories such as GI pipe light grade of 40 mm bore (or higher size as per manufacturer recommendation) & suitable length with MS flat iron clamps (clamps shall be 40 x 5 mm MS flat), nuts, bolts & washers including painting to GI pipe & clamps with two coat of aluminium paint over a coat of red oxide primer complete all as specified & directed. Make:- Crompton / HPL Century LED ltd
S&F in replacement ceiling recess mounting LED 2x2 luminaire of capacity 36W glare free LEDs complete withh all accessories internally prewired suitable for single phase 230 Volts, 50 Hz, AC supply including connectiong up with suitable size of wire complete all as specified and as directed. Make:- Crompton of Cat No. LCTLRP-36-FO-CDL or equivalent in Surya / Havells/Bajaj/ Phillips
S&F in replacement post top lighting fitting, 40 watt LED, robust design with IP65 protection complete all as specified and directed. Make:- Crompton of Cat No. LPTH-20-CDL or equivalent in Surya / Havells/Bajaj/ Phillips
S&F bracket fabricated suitable for street light made out of GI pipe light grade of 25 mm bore & 0.75 mtr length (minimum), bend to shape including 2 pairs of MS flat iron clamps made out of 40 x 5 mm MS flat, nuts, bolts & washers etc, & painting the bracket with two coat of aluminium paint over a coat of red oxide primer & taking down complete all as specified and directed. Make of Pipe :- Tata / Jindal Steel / Surya Roshni Ltd. / Bhushan Power & Steel Ltd. / M/s APL Apollo Tubes Ltd
S&F wall mounted fan 400 mm sweep AC single phase 230V, in- built oscillating system, pull cord control for speed & oscillation on-off including electrically connecting with twisted three core PVC insulated unsheathed flexible cord of 0.75 Sqmm copper conductor from ceiling rose to fan complete all as specified and directed. Make:- Orient, Wall 45 or equivalent in Havells / Ram Ratna Electricals Ltd (RRE)/Bajaj/Phillips
S&Fexhaust fan 250mm sweep, non metallic plastic body, AC single phase, 230 V, 50Hz with & including self closing louvers, nuts, screw, bolts of specific sizes, electrical connection with twisted three core PVC insulated unsheated flexible cord of size 0.75 Sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2cm height with synthetic enamel paint complete all as specified & as directed. (Note: the quaoted rate is including for taking down and depositing old fan to MES store) make: Havells, Ventil Air - DX or equivalent in Orient/ Crompton/Phillips
M/s TRIMURTI ASSOCIATE
M/S B B CONSTRUCTION
PS ENTERPRISE
GEETA CONSTRUCTION
Janata Enterprises
DEBABROTA ROY CHOWDHURY
S D CONSTRUCTION CO
D K SARKAR
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .