REPAIR, MAINT, PAINTING POLISHING OF VARIOUS ARTICLES OF STEEL AND WOODEN FURNITURE UNDER GE EAST AGRA

Amount

REPAIR TO LOCKER BED SIDE STEEL(FD-121 & 1029)

Removing of old existing U/S hasp and staple and S & F new hasp and staple chromium plated steel of best qualtity as per existing shape complete all as specified and directed.

Removing of old existing U/S handle and S & F new chromium plated steel handle of best quaility as per required size and shape complete all as specified and shown on drawing.

Removing of old existing U/S legs of locker bed side steel and S & F new legs Made out of 1mm thick MS sheet as per drawing including one coat a synthetic enamel paint over of coat of red oxide primer Make : Asian/Berger including preparation of new steel surface complete all as specified and shown on drawing.

Removing of dusts,rust,dents and filling of gaps with putty etc and preparation of surface of locker bed side steel and applying one coat of synthetic enamel paint Make : Asian/Berger complete all as specified and shown on drawing.

Removing of old existing U/S shelves of locker bed side steel and S & F new shelves of locker bed side steel made out of 20 gauge MS sheet as per existing shape and size complete including one coat of sythetic enamel paint Make : Asian/Berger over a coat of red oxide primer including preparation of new steel surface on both sides complete all as specified and directed.

REPAIR TO ALMIRAH LARGE STEEL (FD1033 & FD/E6/MAP/18)

Removing of old existing U/S lock and S & F new brass lock of 6 lever with two keys Make : Godrej/Link Godrej pattren with fittings complete all as specified and directed

Removing of old existing U/S handle and S & F new chromium plated steel handle of best quality tightened with nut and bolts with fitting complete all specified and directed.

Removing of old existing U/S 3 way lock device with steel rod and S & F new 3 way locking device with 10mm dia MS rod and shackle complete all as specified and directed

Removing of old existing U/S legs and S & F new legs made out of 20 gauge MS sheet with running gas welding as per existing shape and size complete or shown in drawings including one coat painting with synthetic enamel paint over a coat of red oxide primer Make : Asian/Berger including preparation of steel surface complete all as specified and directed.

Removing of old existing U/S shelves of almirah large1/2H X1/2 shalf steel and S & F new shelves made out of 20 gauge MS sheet as per existing shape and size complete including one coat painting with synthetic enamel paint over a coat of red oxide primer Make : Asian/Berger including preparation of steel surface complete all as specified and directed.

Removing of old existing U/S shutter of almirah large steel and S & F new shutter made out of 20 gauge MS sheet including one coat painting with synthetic enamel paint over a coat of red oxide primer Make : Asian/Berger including preparation of steel surface complete all as specified and directed.

S & F in replacement of old U/S clamps of suitable size with nut, bolt and warsher for shelves of almirah duly painted with two coat of synthetic enamel paint over a coat of red oxide primer Make : Asian/Berger including preparation of new steel surface complete all as specified and directed.

Removing of all dust , rust, dents filling of gaps with putty etc and preparation of internal and external surface of steel almirah and applying one coat of synthetic enamel paint Make : Asian/Berger for steel almirah large 1/2H X 1/2 SH size all as specified and directed.

TABLE BED SIDE MAP (FD/E6/MAP/15 ( R)

Taking down old U/S legs,rails and S&F new MS square pipe 16mmX16mm square thickness of wall not less than 16mm guage including welding and painting complete all as directed.

Taking down old U/S top of table bed side and S & F new top made of 16 mm thick prelaminated particle board exterior grade Make : Kitply/Novopan ISI marked one side teak face and other side balancing white as per exisiting shape and size including standard PVC edging (min thickness 1.6mm) shall be provided all round in tops as per existing shape with headless nails complete.

Taking down old U/S and S & F new upper drawer as per existing shape and size front of drawer shall be 12mm thick prelaminated particle board exterior grade make : Kitply/Novopan and sides and back of drawer shall be 12mm thick commercial plywood BWR quality Make : Kitply/Greenply and bottom of drawer shall be provided with 6 mm thick commercial plywood BWR quality as per existing shape and size complete.

Taking down old U/S back of table bed side and S & F new back made of 6 mm thick commercial plywood BWR Make : Kitply/Greenply as per existing shape and size complete.

TEAPOY VERANDAH (FD-255)

Taking down old U/S top of teapoy and S & F new top made of 18mm thick prelaminated particle board having one side teak face and other side as white exterior grade Make : Kitply/Novopan ISI marked as per existing shape and size including PVC moulded beeding all round of the top complete all specified and directed.

M & L for painting of steel frame with one coat of white synthetic enamel paint Make : Asian/Berger including prepartion of old steel surface complete all as specfied and directed.

REPAIR TO TABLE OFFICE CLERK STEEL (FD-84/1004)

Removing of old existing unserviceable top and S & F new Top made of 18/19mm thick prelaminated particle board exterior grade Make : Kitply/Novopan having one side teak face and other white including PVC beading alround of the top as specified and directed.

Removing of old existing unserviceable drawer and S & F new drawer made out of 1mm thick MS sheet including one coat painting with synthetic enamel paint Make : Asian/Berger over a coat or red oxide primer including preparation of steel surface complete all as specified and directed.

Removing of old existing unserviceable lock and S&F new lock brass 6 lever of best quality make : Godrej/Link with duplicate keys, godrej patteren all as specified and directed.

Removing of old existing unserviceable legs/stiffener/rails of tableoffice clerk steel and S&F new legs/stiffener/rails made out of 25 mm MS conduit pipe through gas welding including one coat painting with synthetic enamel paint over a coat of red oxide primer Make : Asian/Berger including preparing of steel surface complete all as specified and directed.

M & L for spray painting with one coat of synthetic paint Make : Asian/Berger to all exposed surface internally and externally including prepartion of old/New surface complete all as specified and directed.

REPAIR TO STEEL RACK ADJUSTABLE 6/8 SHELF (FD-1038)

Taking down old U/S legs of rack steel and S&F legs of rack steel of MS slotted holes steel angle iron 40X40X3mm and fixed complete by means of bolting/welding of riveting etc including one coat of red oxide primer Make : Asian/Berger including preparation of new steel surface complete all as specified and directed.

Removing U/S steel shelves and S & F new shelves of size 915mm long,610mm wide made out of 20 gauge PGI sheet including fixing complete by means of bolting/welding or riveting etc including one coat of synthetic enamel paint (spray painting) over one coat of red oxide primer Make : Asian/Berger including preparation of new steel surface complete all as specified and directed.

S & F mild steel corners made out from MS sheet 2mm thick size 75X5mm in traingular shape fixed by bolting or rieveting as per site requirement including one coat of synthetic enamel paint (spray painting) over one coat of red oxide primer Make : Asian/Berger complete all as specified and directed.

M & L for spray painting with one coat synthetic enamel paint Make : Asian/Berger including preparation of old/new surface removing of dents filling with putty complete all as specified and directed.

TABLE WITH DRAWER (STEEL) 900X600X760mm

Taking down old U/S top and S & F new top made of 18mm thick prelaminted patricle board having one side teak face and other side as white exterior grade ISI marked make : Kitply/Novopan as per exiting shape and size all as specified and dorected.

M & L for painting to all exposed surface of table 900X600x760mm steel with one coat of synthetic enemel paint Make : Asian/Berger including preparation of old surface complete all as specified and directed.

RE-CANNING/RE-WEAVING TO CHAIR VERANDAH :- FD-256/259

Taking out old U/S cane from chair verandah and recanning seat and back with new 4 mm wide half round white plastic cane of superior quality Make: Ajay/Sah incl welding of joints wherever required and painting with two coat of white synthetic enamel paint Make : Asain/Berger and preparing of old steel surfaces.

Taking out old U/S Nylon newar from chair verandah and re-weaving seat and back with virgin quality of white/light coloured nylon newar 50 to 55 mm wide incl welding of joints wherever required and painting with two coat of white synthetic enamel paint Make : Asian/Berger and preparing of old steel surfaces.

S & F of hard rubber shoe black in colour of best quality to legs for chair verandah complete all as specified and shown on drg complete all as specified and directed.

CHAIR CB STEEL SPL WITH HAND REST:- FD

Taking out unserviceable existing seat frame and S&F new seat frame of 1st class hard wood shisham fixed with 04 Nos machine screw as per existing size including canning with superior aproved quality plastic cane of size 2mm wide 1/2 round Godrej pattern and 3mm wide 1/2 round on border and apply two coat of french polish on wood surface complete all as directed by Engineer-in-charge.

All as per item 9.01 above but back frame of chair

(c) Taking out unserviceable hard wood teak wood plank hand rest (Openable type) and S&F new 20mm thick teak wood plank hand rest shall be hinged on arm rest with 18mm wide piano type mild steel chromium plated hinges at right handle side on chair arm screwed to 19mm square mild steel tube and two coat of french polish complete all as directed by Engineer-in-charge.

Taking out unserviceable existing arms of left hand side and S&F new arm rest of first class hard wood shisham fixed with suitable size of screw including two coat of french polish complete all as directed by Engineer-in-charge.

M & L for painting to all exposed surface of chair with one coat of synthetic enemel paint Make : Asain/Berger including preparation of old surface complete all as directed by Engineer-in-charge.

REPAIRS TO STEEL ALMIRAH LARGE / MEDIUM (FD-1031 & 1032)

Removing of old existing unserviceable lock and S & F new brass lock of 6 lever with two keys Make : Godrej /Link marked with fittings complete all as specified and directed.

Removing of old existing unserviceable handle and S & F new chromium plated steel handle of best quality tightened with nut and bolts with fittings complete all as specified and directed.

Removing of old existing unserviceable 3 way locking device with steel rod and S & F new three way locking devices of Almirah Large with 10mm dia MS rod and shackle complete all as specified and directed.

Description all as per items No. 10.03 above but for almirah medium steel and ditto

Removing of old existing unserviceable legs and S & F new legs made out of 20 gauge MS sheet with running gas welding as per exiting shape and size complete or shown in drawing including one coat of synthetic enamel paint Make : Asian/Berger over a coat of red oxide primer indcluding preparation of new steel surface complete for almirah large/ medium all as specified and directed.

Removing of old existing unserviceable shelves of almirah large steel and S & F new shelves made out of 20 gauge MS sheet as per exiting shape and size primer including one coat of synthetic enamel paint over a coat of red oxide primer Make : Asian/Berger including preparation of new steel surface on both side complete all as specified and directed.

Description all as per items No. 10.06 above but for almirah medium steel and ditto...

S & F in replacement of old unserviceable clamps of suitable size nut, bolt and washer for shelves of almirah and applying one coat of synthetic enamel paint Olive green Make : Asian/Berger for steel almirah large all as specified and diercted.

Removing of dust,rust, dents filling of gaps with putty Make : Shalimar and preparation of internal & external surface of steel almirah large all as specified and directed and painting of preared surfaces with approved paint Make : Asian/Berger with spray gun.

Description all as per items No. 10.09 above but for almirah medium steel and ditto…

M & L painting with two coat of approved synthetic enamel paint internally and externally to the steel furniture Make : Asian/Berger as shown on drawing and as directed by removing dents where required, filling holes with putty etc including preparation of surface with approved shade for the following articles:

Bed hard steel (Map Drg No.FD/E6/MAP/08( R )

Chair school with hand board.( FD /E6/MAP/05)

Teapoy Verandah ( FD 208/255/383)

Rack shoe steel (FD/E6/MAP/02 (R)

Table 3' X 2' with drawer/w/o drawer (FD 291/1009,283/1008)

Chair Verandah MAP

Almirah Large Steel FD-67(M)/351/1031

Almirah Med Steel FD-67(M)/350/1032

Chair CB Steel with Arm (FD -75(M)

Chair CB Steel without Arm (FD -75(M)

Locker bed Side Steel FD-127(M)/257

Chair Verandah FD-256/359

Steel racks 3 tier/4 tier/6 tier FD-1039

REPAIR TO FORM WITHOUT BACK STEEL (FD-77/1027)

Removing of old existing U/S legs/stiffener/rails of form without back steel and S & F new legs/stiffener/rails made out of 25mm MS conduit pipe 16 gauge square/round through gas welding including one coat of red oxide primer Make : Asian/Berger including preparation of steel surface complete all as specified and directed.

Removing of all dust,rust etc and M & L for painting with one coat of synthetic enamel paint Make : Asian/Berger including preparation of old/new surface complete all as specified and directed.

Taking down old U/S plank of form without back and S & F new plank of shisham wood of size 1525 X 300X 25mm with required size of nuts, bolt and warsher as required all specified and directed.

STOOL REVOLVING STEEL (No.FD-354)

Taking down old U/S seat of stool dressing and S&F new seat made out of 32 density foam Make : Sleepwell/Dunlop over which a layer of 20mm cotton shall be placed and covered with best quality cushion cloth at top and turned inside at bottom of wooden seat. Rexin cover shall be fixed over top and the bottom of wooden seat as shown in drg all as specified and directed.

M & L for painting of all exposed surface of stool revolving steel with one coat of synthetic enamel paint including preparation of old surface complete as specfied and directed.

REPAIR TO CHAIR CB STEEL WITH/WITHOUT ARMS (FD-75)

Removing of old existing seat frame and S & F new seat frame of Ist class hardwood shisham fixed with 4 Nos machine screw 75 mm long X 3mm dia including canning with superior approved quality plastic cane size 2 mm X wide 1/2 round godrej pattern and 3 mm wide 1/2 round on border and apply two coats of French polish in black colour on wood surface of chair CB steel with arm complete all as specified and directed.

Description all as per items No. 14.01 here-in-before but back frame of chair CB steel with arm.

Description all as per items No. 14.01 here-in-before but seat frame of chair CB Steel w/o arm.

Description all as per items No. 14.01 here-in-before but back frame of chair CB steel w/o arm.

Removing of old existing UNSV arms and S&F new arm rest of Ist class hard wood shiasham fixed with suitable size of screw including two coats of French polish in black color complete all as specified and directed.

S & F iron strips 75 mm long 25 X 4mm welded to chair CB steel with/without arm including two coats of synthetic enamel paint over a coat of red oxide primer Make : Asian/Berger including prepartion of surface complete all as specified and directed

M & L for painting to all exposed surface of chair steel CB with arm with one coat of synthetic enamel paint black Make : Asian/Berger with spray gun including preparation of old surface complete all as specified and directed.

Description all as per items No. 14.07 here-in-before but for chair CB steel without arm.

Removing of old PVC caps/shoes and S & F new PVC shoe/caps fixed with suitable size screw to chair with/without arm all as specified and directed.

TABLE With DRAWER (STEEL) 900X600X760mm

Taking down old U/S top and S & F new top made of 18mm thick prelaminted patricle board having one side teak face and other side as white exterior grade ISI marked make : Kitply/Novopan as per exiting shape and size all as specified and dorected.

M & L for painting to all exposed surface of table 900X600x760mm steel with one coat of synthetic enemel paint Make : Asian/Berger including preparation of old surface complete all as specified and directed.

REPAIR TO TABLE OFFICE OFFICER STEEL (FD-84/1002 & 1003)

Removing of old existing U/S top of table and S & F new table top made of 18/19 mm thick prelaminated particle board exterior grade having one side teak face and other side white including 4mm thick teak wood beading all around of the top all as specified and directed.

Removing of old existing U/S lock and S & F new lock brass 6 lever Make : Godrej/Link of best quality with duplicate keys, godrej patern all as specified and directed.

Removing of old U/S existing drawer and S & F new drawer made of 1mm thick MS Sheet including one coat of painting with synthetic enamel paint over coat of red oxide primer Make : Asian/Berger including preparation of new steel surface complete all as specified and directed.

Removing of all dust,rust etc and M & L for spray painting with one coat of synthetic enamel paint Make : Asian/Berger to all exposed surface internally and externally including preparation of old surface complete all as specified and directed.

REPAIR TO TABLE TYPIEST STEEL (FD-84(M)

Removing of old existing U/S top of table top made of 18/19 mm thick prelaminated particle board of exterior grade having one side teak face and other side white Make : Kitply/ Novopan including 4mm thick teak wood beading all round of the top all as specified and directed

Removing of old existing U/S drawer and S & F new drawer made out of 1mm thick MS sheet including one coat painting with synthetic enamel paint over a coat of red oxide primer Make : Asian/Berger including preparation of steel surface complete all as specified and directed.

Removing of all dust, rust etc from table and M & L for spray painting with one coat of synthetic enamel paint Make : Asian/Berger exposed surface internally and externally including preparation of old surface complete all as specified and directed.

REPAIR TO TRESTLE STORE ROOM IRON (FD-86 (M))

Removing of all dust,rust etc and M & L for spray painting with one coat of synthetic enamel paint including preparation of old steel surface complete all as specified and directed.

REPAIR TO SIDE RACK 2 SPACER'S WITH TRAY STEEL

Taking down old US legs of rack steel and S&F new legs of MS steel angle iron and fixed completely by mean of welding including applying one coat of synthetic enamel paint over a coat of red oxide primer Make : Asain/Berger including preperation of new steeel surface completelly as specified and directed

Removing U/S steel shelves and S & F new shelves of existing shape and size made out of 20 gauge PGI sheet including fixing complete by means of bolting/welding or riveting etc including one coat of synthetic enamel paint (spray painting) over one coat of red oxide primer including preparation of new steel surface complete all as specified and directed.

M & L for spray painting with one coat synthetic enamel paint Make : Asain/Berger including preparation of old/new sruface removing of dents filling with putty complete all as specified and directed.

CHARPOY FOLDING IP WITH HARD TOP ( FD/388

Taking down old U/S top and S&F of new top of Charpoy Folding IP Make :Kitply/Greenply ISI marked as per existing shape all specified and directed.

Taking down old U/S MS frame of conduit pipe 25mm 16 guage with new 25mm 16 guage pipe of Folding Charopy IP legs including welding and painting & legs with nylon Buffers complete all as directed.

TABLE COMPUTER (FD/E6/MAP/03)

Taking down old U/S top of Computer Table and S & F new top made of 18mm thick prelaminated particle board with 4mm TH wood beading duly polished Make : Kitply/Novopan ISI marked as per existing shape and size including PVC moulded beeding all round of the top complete all specified and directed.

Taking down old U/S legs,rails and S&F new MS rect MS pipe 25mmX50mm square thickness of wall not less than 18mm guage including welding and painting & legs with nylon Buffers complete all as directed.

Removing U/S wooden shelf and S & F new shelf of size 18mm TH prelam particle board with sliding channel Make : Kitply/Novopan ISI complete all as specified and directed.

Removing U/S pull out tray of 18mm and S&F of new pull out tray of size 18mm TH prelam particle board Make : Kitply/Novopan ISI complete all as specified and directed.

Removing U/S drawer and S&F of new drawer 75mm deep on telescophic channels of size 18mm TH prelam particle board Make : Kitply/Novopan ISI complete all as specified and directed.

GIRENDRA SINGH AND CO

M/S MAKHIJA TRADERS

R K SINGH AND CO

Anand Construction

M/S DURGA ASSOCIATES

M/S J J ENTERPRISES

SOHAMM ENGINEERS