Construction of control room building with allied electrical works for conversion of ummanned to manned SS at Adiyakkamangalam 33-11 KV SS in Thiruvarur District

Amount

Civil work : Earth work excavation for foundation in hard stiff clay, stiff black cotton hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders with an initial lead, lift, etc, complete.

Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the buildingusing termite 250ml for 5lit of water etc. complete.

Supplying and filling with M-Sand for foundation including cost of sand, all labour, lead,lift, consolidation etc. complete.

PCC 1:4:8 mix using 40mm HBS machine crushed metal for foundation with out form work including cost of all labour, materials, lead, lift, curing, etc., complete.

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for column raft foundation without formwork including cost of all materials, labour lead, litf, etc., complete.

RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for column concrete with formwork including cost of all materials, labour lead, litf, etc., complete. But excliding cost fo steel reinforcement (by using mixer machine).

RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for Gradebeam / plinth beam with formwork including cost of all labour, materials, lead, lift, etc, complete. But excliding cost fo steel reinforcement (by using mixer machine).

RCC 1:1 1/2:3 mix using 12 to 20mm HBS metal (machine crushed) for continous lintelwith formwork including cost of all materials, lead, lift, etc., complete.(by using mixer machine).

RCC 1:1 1/2:3 mix using 12 to 20mm HBS metal (machine crushed) for Sun shade 90/60cm. Projection 80 mm thick at wall end and 50 mm thick at free end and loft, with form work including cost of all materials, labour, leas, lift, etc., complete. (by using mixer machine).

RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal for " T " beam, bed block with centering shuttering including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement(Roof beam)

RCC 1:1 1/2:3 using 12mm to 20 mm HBS metal (machine crushed) for roof slab concrete of 125 mm thick with formwork including cost of all materials, labour, lead, lift, centering shuttering , curing, etc., complete. But excluding cost of steel reinforcement.

Providing RCC 1:11/2:3 using 12-20mm graded hard machine broken granite stone with 100mm thick, including cost of all materials without form work, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Flooring concrete.

RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For precast cover slab concrete.

RCC 1:1.5:3, using 20mm HBG metal for cable duct side wall with form work including cost of cement, all materials, labour, lead, lift, etc. complete.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Supply ,Labour charges for fabrication, fixing in position of 90LBS MS rail with proper anchorage by using welding and cutting to the required size and length anf fixing over transformer plinth as per departmental specifications including cost of labour, transport, placing in position, lead,lift etc complete.

Brickwork in CM 1:5 mix using bricks of size 9"x 4 3/8"x2"3/4" for basement , super structure including cost of all materials, labour, lead, lift, curing, etc., complete. By using II class Champer Burnt bricks

Brickwork in CM 1:3 mix using II class chamber brick of size 9"x 4 3/8" x 2 3/4" for bath, fol, brick on edge, partition wall, including cost of labour materials, curing, lead, lift, etc., complete.

PCC 1:3:6, using 20mm HBG metal foundation without form work including cost of cement, all materials, labour, lead, lift, etc. complete.

PCC 1:2:4, using 20mm HBG metal foundation without form work including cost of cement, all materials, labour, lead, lift, etc. complete.

PCC 1:2:4, using 20mm HBG metal foundation with form work including cost of cement, all materials, labour, lead, lift, etc. complete.

PCC 1:2:4, using 20mm HBG metal coping with form work including cost of cement, all materials, labour, lead, lift, etc. complete.

Labour charges for transporting from casting yard to curing tank,curing tank to cable duct , aligning and laying of RCC pre cast slab as directed by the site engineer including all labour lead lifts etc complete

Fabrication and Labour charges for fixing of GI angles of 50x50x6mm sizes vertically @ 75cm c/c to the required length for supporting the cable in the cable duct in correct position including labour ,cutting etc., complete as per the drawing and std.specification.

Providing projected border of 7.50cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing etc., complete.

Providing projected border of 20cm. width for plinth beam in CM. 1:3 20mm thick including cost of all materials, labour, lead, lift, etc., complete.

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, labour, lead, litf, etc, complete.

Plastering with CM. 1:3 mix 12mm thick for ceiling,fol, bath, RCC pillars, sunshade, loft, etc., including cost of materials, labour, lead, lift, watering, curing, etc., complete.

Supplying and filling of stone dust with required thickness all lead and lift including and all other T&P etc., complete.

Supply and Spreading of 12-20mm of HB stone inside the yard as per std. spec.including cost of materials ,labour lead,lift etc

Providing weathering course with one course of pressed tiles of size 23x23x2cm. Embeded in CM 1:3 12mm thick & pointed with same mortor mixed with crude oil 10% weight of cement used over a bed of brickjelly, lime concrete of 80mm thick with ratio of 32:12.5 cft, (no sand) with the required slope and beaten with wooden beaters including cost of all materials, curing, etc., complete.

White washing two coats with white cement including cost of all materials,labour lead,lift etc complete

colour washing Two coats inside walls using Interior emulsion paint over aprimer one coat including cost of all materials, labour, lead, lift etc., complete.

Colour washing two coats out side walls by using Exterior emulsion paint over a primer one coat of approved quality with suitable colour including cost of all materials, labour, lead, lift, curing etc., complete.

Supplying and fixing of two side polished 20-30mm Thick cuddapah slab for cupboard etc., including cost of all materials, labour, lead, lift, etc., complete

Refilling with excavated earth other than sand in foundation and sides of masonry, consolidation as per std.specn.with water including all, labour, lead , lift, etc., complete.

Removing the excess earth to the nearby bund or low laying area instructed by field engineer including all lead, lift, etc., complete.

Finishing the floor with 20mm thick cement concrete using 3 to 10mm stone chippings (Ellis pattern first sort -no sand to be used) with water proof compound for ceiling including cost of all materials, labour, lead, lift etc. complete.

Flooring with available sizes of approved quality,design & colour (Johnson or equivalent make) of non-slippery ceramic tiles laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete

Flooring with approved Vitrified tiles 600x600mm of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete.

Dadooding walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface , including cost of all materials, labour, lead, lift, etc. complete.

Providing and laying in position of ceramic acid resistant tiles over a bed of 20mm thick CM1:3 including pointed with acid resistant C.M for flooring in battery room, including cost of all materials, Polishing, labour, lead & lift etc. complete.

M&F in position of anodised aluminium glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 5mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door 1.20 x 2.20 m

M & F in position of anodized aluminium glazed sliding window of size 1.20 x 1.35m as per ISS 1038-1958 (1245 ISS) using aluminium sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg / m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 5mm thick sun cool glass panelling including cost of all materials, locking arrangements labour, lead, lift, etc., complete.

Fabrication,supply & fixing of critol type steel ventilator as per IS 1038 using steel sections confirming to IS 7452 with centre hung shutterswith 4mm thick pin head glass and 8mm square horizontal (0.75mx0.45m) including cost all materials labour etc complete.

Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials lead lift etc., complete. .

Providing and fixing sanitary fitting consisting of Neycer / parryware of oriya patten Water Closet 45cm with P/S trap connecting with PVC ventilating shaft and Y bend complete, including cost of all material, labour, lead, lift, etc, complete.

Supply and fixing of wash basin of size 560x410mm coloured colour and of approved quality and make[Parryware or equivalent] with 12/15mm dia brass CP pillar tap [waterman], 32mm PVC waste pipe [Kohinoor], 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection [Kohinoor] etc. fixing the basine in the wall with GI/Alu. brackets, giving necessary water connection etc., and mirror with beveled edge fixed with suitable CP brass screws etc., complete.

Supplying and fixing of 15mm dia long body brass bibcock, Metro or L&T make with necessary specials including cost of all materials lead, lift, labour etc.,complete.

Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick, gareware or equivalent including the cost of all materials, labour, lead, lift, T&P etc. Complete.

Supplying and sticking the name stickers in doors identifying the rooms including cost of material, labour etc. complete.

Providing PVC down fall pipe using 110mm dia 4 Kg / sqcm, PVC pipe and pvc clamp line supreme etc, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers.

Supplying and fixing black granite stone Engraved Foundation detail and year of construction fixing in wall at entrance for Entrance 900x600 including the cost of all materials, leads, lifts etc., complete

Supplying and laying UPVC pipe 32 mm dia to withstand the pressure of 10kg/ cm2 ISI make including cost of pvc pipe coupling labour for cutting laying fixing, tighting etc including earth work excavation and refilling trench etc complete for earth pit water supply arrangements

Supplying and laying UPVC pipe 25 mm dia to withstand the pressure of 10kg/ cm2 ISI make including cost of pvc pipe coupling labour for cutting laying fixing, tighting etc including earth work excavation and refilling trench etc complete for earth pit water supply arrangements

Supplying and laying UPVC pipe 20 mm dia to withstand the pressure of 10kg/ cm2 ISI make including cost of pvc pipe coupling labour for cutting laying fixing, tighting etc including earth work excavation and refilling trench etc complete for earth pit water supply arrangements

Supplying and fixing in position of gun metal gate valve 32mm dia of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site

Supplying and fixing in position of gun metal gate valve 25mm dia of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site

Supplying and fixing in position of gun metal gate valve 20mm dia of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site

Supplying and fixing inposition of heavy duty wheel valve 32 mm dia of approved best quality including cost of all special fixtures lead, lift,etc., complete for eath pit water supply arrangements..

Supplying and fixing inposition of heavy duty wheel valve 25 mm dia of approved best quality including cost of all special fixtures lead, lift,etc., complete for eath pit water supply arrangements..

Supplying and fixing inposition of heavy duty wheel valve 20 mm dia of approved best quality including cost of all special fixtures lead, lift,etc., complete for eath pit water supply arrangements..

Providing PVC door bend 50mm dia including fixing in position cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing 100 x 75mm PVC floor trap in bath room with one pvc door bend shoe of 50mm.dia including cost of all etc., complete

Supplying and fixing of PVC end cap of 20mm size of approved quality cost of all materials, labour for laying and making holes, lead, lift, etc., complete for water supply arrangements to earth pit.

Supplying and fixing of best quality of mirror of size 500 x400mm mirror with soap tray, towel stand, screw and fixing near the wase basin, teak wood round block, including cost of all material, labour, lead, lift, etc, complete.

Supplying and laying 50 mm Dia GI pipe B Class ISI make including cost of GI pipe coupling labour for cutting laying fixing tighting etc including earth work excavation and refilling trench etc complete

Supplying and fixing of approved quality of stain less steel towel rod of size (2 ft) and fixing the same over teak wood round block and soap tray (Pocelin) in bath room including cost of all materials lead lift labour etc complete as directed by department Engineer at site

supply,transport and fixing of 1000 litre PVC sintex tank over the roof including cost of all materials lead lift etc

Wiring with 2x1.5 sqmm(22/0.3) PVC insulated unsheathed SC Cu.Conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5A F.T.switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point (SD No.24)

Supply and run of 2x1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed copper conductor of 1100 V grade. (SD 67)

Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mmx100mmx113mm TW switch box with 3mm thick Hylem sheet cover for 5A 3pin non interlocking Wall socket with 5A Flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point(SD No.38)

Wiring with 2x4sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, inflush with wall, with 150mmx100mmx113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non interlocking Wall socket with 15A Flush type switch with continuous earth wire connection of 14 SWG TC wire,and making good of the concealed portion,with suitable colour for concealed power plug point(SD No.40)

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work. (SD 167)

Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only. (SD 158)

Supply and fixing of 20W LED 3000K flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting(SD 88).

Supply and fixing of 4'40 W Twin type LED Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes. (SD 91)

Supply and fixing of WT bulkhead fitting with guard (Philips/Bajaj/Crompton/K.Lite) suitable for 11W CFL/LED lamp with CFL.(SD.No.83)

Supply and fixing of 11 W CFL for BH point. (SD 80)

Supply and fixing of 1200 mm sweep(56") AC ceiling fan complete with stepped electronic 300 W regulator with 1metre down rod on the existing clamp(SD.No.110)

Supply and fixing of 450mm (l8") sweep (lightduty) AC Exhaust fan complete without provision of hole in the wall(SD No.119)

Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI make , 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification.

Supply and fixing of Horizontal type 4way triple pole neutral MCB distribution board in sheet steel enclosure Double door(Metal) with 40A 4pole MCB isolater as in coming and12Nos.6A to 32A SP MCB as out going in flush with wall and making good of the concealed portion with earth connection.TheMCBDBandMCB's should be with the ISI mark (like standard make)(SD No.179)

Earthing as per the ISI specification with an earth electrode of 2.1 mt class'B' GI pipe of dia not less than 32mm,with copper earth plate of size 125mmx50mmx6mm,with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD No.234)

Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete.

Wiring with two pair copper telephone cable in suitable conduit pipe in wall and terminated with socket for telephone jack with TW switch box in flush with wall covered with hylum sheet of 3mm thick for telephone point

Supplying and fixing of 1 x 48 W LED Street light fittings including cost of all materials, labour, lead, lift etc., complete, as per standard specification.

Supplying and fixing musical quartz type LED Wall Clock showing the time with date and day of size 45 x30 cm of approved quality such as Ajantha / Seiko/ Citizen etc including transport, fixing charges etc complete.

Supplying bucket 2 Nos(big size 15 Liters), mug -4 Nos(2 Liters), Floor mat(1000x500mm) of approved make and quality including cost of all materilas lead lift etc

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., completeSteel half bench a) S Type chair with nylon seated - 3 Nos b)Steel side rack open type 36''x15''x18''- 1 No )Steel half bench- 1 No d) steel stool - 1 No e)Steel Table 45''x24''x30'' - 1 No f)PVC armed Chair of reputed make-3 Nos

Electrical Works : Supply of various types of steels including Cost of steel, Freight &Handling confirming to IS 2062 Gr A at site, Fabricating the steels in to specified structures as per the std.design/Drawing, Painting of Primer coat of Redoxide paint and first finishing coat of Aluminium Paint / Enamel Paint with supply of reputed make paints after proper surface preparation such as cleaning of rust scales using appropriate machinery including all Labour, machinery and Consumables, and as directed by the field Engineer at the SS site.

33KV structures (centre to centre - 4.5m)

33KV Strung Bus structure (4.5m centre to centre)

33 KV Power Transformer Gantry structure

33 KV AB switch structure( 1.8m center to centre)

33KV LAS Structure ( 1.8 m center to centre) (under strung bus)

33KV Pie support Structure (1.8m center to centre)

11KV Bay Extension in Existing Substation (centre to centre - 4.0m)

11KV Feeder Bay structures with 4 Bays +1LV

Non-specfied structures, Extension, Alterations, and Deductions as per station requirement.

Heavy section using RSJ 250 x 125 mm

Heavy section using RSJ 200 x 100 mm

Light section (other than heavy section)

Supply of various types of steels including Cost of steel, Freight &Handling confirming to IS 2062 Gr A at site, Fabricating the steels in to specified structures as per the std.design/Drawing, Painting of Primer coat of Redoxide paint with supply of reputed make paints after proper surface preparation such as cleaning of rust scales using appropriate machinery including all Labour, machinery and Consumables and as directed by the field Engineer at the SS site.

11 KV Breaker Platform

Yard Fire Stand frame with top canopy cover

Battery Room Fire Stand

AC Junction Box fixing frame

Labour for the Erection of the fabricated steel structures at the SS site with Supply of GI Bolts, Nuts & Washers(Spring/Flat as required) confirming to IS including Labour, machinery and Consumables as required & as directed by the field Engineer.

33 KV Strung Bus structure

33 KV Power Transformer Gantry structure

33 KV AB switch structure( 1.8m cr - cr)

33 KV Pie support Structure ( 1.8 m cr - cr)

33 KV LAS Structure ( 1.8 m cr - cr) under strung bus

11KV Feeder Bay structures (centre to centre - 4.0m)

11KV Bay structures with (4 Bays +1 LV )

Non-specfied structures, Extension, Alterations, and Deductions as per station requirement.

Heavy section - 250 x 125 RSJ / 200 x 100 RSJ

Light section - All other types of Steels

Other station Structure

11 KV Breaker Platform

Yard Fire Stand frame with top canopy cover

Battery Room Fire Stand

AC Junction Box fixing frame

Supply and fabrication and erection of eye bolts/grout bolt with 20/22 mm rod confirming to IS with proper threading and 2 nos MS Nuts as directed by the field Engineer.

Grout Bolt

Eye Bolt

Supply of Various types of Steel materials confirming to ISS 2062 –Gr A including GST, Freight, Handling, etc., at site for Earthing with Labour for Fabrication & erection for Earthing including Labour, Machinary and Consumables as Required and as directed by the Field Engineer.

Labour for excavation and refilling of Earth /Trench for earthmat, cable, etc., of any size/depth narrow excavation as directed by the field Engineer.

Normal clay / hard gravel soil.

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder(Sodium Bentonite) 5Kg /Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer (Earth to be supplied by the contractor)

Supply and providing of 450-600 mm dia, 300 mm height, 36 mm thick cement collar for identification of earth electrode location as directed by the field engineer.

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation.

Non-Fragile Materials

33/11KV Isolators

Cables/Conductors including cutting and rewinding

Busbars

Fire equipments/rubber mats/others

Fragile Materials

33/11 KV Breaker

33/11 KV CT/PT/LAS/DT/Others

110 V 120 AH DC Battery Set

33/22/11 KV Insulators

AC/DC/C&R Panels of Non grid type, Single feeder Control/Relay Panels of Grid type.

Battery Charger-Simple type

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor using Board's crane for one operation.

Fragile Materials

33/11 KV Breakers

Labour for the Erection of Strung bus and all related hardwares, fittings, clamps including Meggering, hoisting of insulators, and consumables and as directed by the field engineer.

upto 33 KV Single Conductor Strung Bus/phase

Labour for the erection of Insulator single pole stack for supports/Underhang including Meggering & other consumables and as directed by the field engineer.

Up to 33 KV

Labour for the erection of Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer.

50 mm (1 length)

50 mm with bend (1 length)

Labour for the Erection of Jumper/Droppers using Moose/Zebra/panther Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer.

Supply of Aluminium Power Connectors/ Clamps/ Fittings with SS Bolts and Nuts, including GST, frieght etc., confirming to IS as per the drawing and specification.

4-Bolt Tension fitting

Switch End Clamp for Zebra

Switch End Clamp for Mink

Switch End Clamp for 50mm Bus

Seating Block for 50mm Busbar

T clamp for Zebra to Zebra

T Clamp for 50m Bus to Zebra

Free End Clamp 50mm

50mm Corona Bell

Labour for the Erection of 33/22/11 KV Breakers complete set using Crane with proper levelling, proving holes cutting, jointing, wherever required, Erection of 3 Nos CTs without crane, Providing conductor jumpers from Isolator/Bus to Breaker, Breaker to CT's, CTs to Isolators, Supply & Erection of Earthing steels Four Risers Breaker Structure from Earthmat/electrode using 50x08 MSF, Providing Flexible Copper Earthing loops to the Breaker earthing points, Supply & painting of first primer coat of redoxide and two coats of Bus green Enamel paint on to the Earth risers inculing cost of reputed make paints, consumable, GST, frieght, etc, and as directed by the field engineer.

11 KV Breaker using Crane arranged by the Contractor

11 KV Breaker using Board's Crane

Labour for the erection of Potential Transformers, Supply and Erection of Earthing steels using 50x8 MSF & Flexible Copper loops to equipment & Junction box earthing, structure earting, Erection of Junction boxes, Supply and erection of Fixing steels, Painting of Primer Redoxide, Two coats of Bus Green enamel Paint on Earthing steels with supply of reputed make paints, including GST, frieght & all consumables as directed by the field engineer.

33 KV Bus PT (3 units)

11 KV Bus PT (Single units)

Labour for the Erection of Isolators to correct alignment , including the cost of Consumables and lubricants, Meggaring, replacement of insulators if necessary etc, Supply and erection of Earthing steels to Isolator Bases, Insulators, ABS Booms, Poles, Earth Blades, operating Mechanism earthing etc., using 50x8 MSF, Supply and Erection of 25 x 3mm² Flexible Copper to the centre Rotating Insulators, Mechanism Box etc, Supply and Applying of one coat of Primer Redoxide paint and Two coats of Bus Green Enamel Paint on earthing material including GST, Freight, consumables etc.,.as directed by the field engineer.

33 KV Isolator

22/11 KV Isolator

Labour for erection of LAS station type with surge monitor/ accessories etc., (3 Nos single pole stack) including Supply and erection of Earthing steels, (connecting to earth electrode & mat) Supply and Painting of Primer Paints and Two coats of Enamel Paints of reputed make, including GST, frieght, consumables etc., as directed by the filed Engineer.

33/11 KV LAS

Labour for the Erection of Control Panels includings consumables as directed by the field engineer.

Simplex type/AC/DC/C&R Panel of Non-Grid type, Battery Chargers, Single feeder Control/ Relay Panels of Grid type (P&C)

Labour for Erection of Battery set including two coats of painting of Acid proof paint on wooden stand and neatly stacking the Battery cells and fixing of connecting plates.

110 V DC , 120 AH Battery.

Labour,Consumables for the Initial filling and First Charging of the Battery to the required AH input and thereafter atleast 3 cycles of Charge / Discharge of the Battery set till the battery is charged to its full Capacity as directed by the field Engineer.

110 V DC , 120AH Battery.

Supply and Erection of 5 m Grouting type lamp post of B class MS pipe (3 inch dia for 3mtrs & 2.5inch dia for 2 mtrs) including single/double fitting (Straight or 'V' type) fixing arrangements, 1 inch dia B class pipe arms, yard light box fixing flat and one coat of redoxide and one coat of aluminium paint.

Supply and Erection of reputed make street light fitting with 1x(70-75)W, 240V CGL/PHILIPS make LED Light.

Supply of Erection of yard light fuse unit mounting box of size 200x200x150mm (BxHxD) out of 18 SWG (1.22mm) M.S Sheet including primer paint as per Drawing including the Supply ,Fabrication and Erection of Box fixing Flat using 50x8MSF, Two coat of enamel paints, provided with 16/20A rewirable Porcelain Fuse carrier unit, 16 A Bakelite connenectors including its cost materials, consumables, GST, frieght, etc and as directed by the fiels engineer on site requirements. (The box shall be vermin proof,shall be provided with sturdy hinges,with provision for cable entry and locking arangements).

Fabrication, supply and fixing of C.T/P.T junction box of size 400x300x150 mm of 16 SWG(1.6mm) M.S.sheet with primer coat paint, Supply, Fabrication and erection of Box fixing Flats using 50x8 MSF, Supply and Fixing of 25x3mm² Braided Flexible Copper loops to box earth., Two coat of Enamel Paint, provision for fixing terminal blocks/MCBs including consumables, GST, fright, etc., as directed by the field engineer on site requirements.(The box shall be vermin proof shall have sturdy hinges, & locking arrangements)

Supply and Labour for the Second Finish Coat of Aluminium paint on standard Steel Structures including cost of Paints of reputed make, Consumables etc., as directed by the field Engineer.

33KV Structure (4.5m centre to centre)

33 KV Four Pole structure (Incomer)

33 KV Strung Bus structure

33 KV Power Transformer Gantry structure

33 KV AB switch structure (1.8 m centre)

33 KV Pie support Structure (1.8 m centre)

33 KV LAS Structure (1.8 m cr - cr) under bus

11 KV Feeder Bay structures with 6 Bays + 2 LV

11 KV Station Transformer structure

Labour charges for two coats of enamel painting in substation structures, steels etc., including the cost of reputed make paints and other consumables as directed by the field engineer.

33/22 KV Breaker Platform

11 KV Breaker Platform

Yard Fire Stand frame with top canopy cover

Battery Room Fire Stand

AC Junction Box fixing frame

250 x 125 RSJ Pole Bottom (Height 0.45 to 0.50m)

200 x 100 RSJ Pole Bottom

Yard Light Pole Bottom

Supply & Labour charges for two coats of enamel painting in any substation structures, steels, etc and wherever required including the cost of reputed make paints and other consumables as directed by the field engineer.

Labour, consumables for first primer coat using red oxide paint ansd first finish coat of painting using alluminium paint of all sections as as directed by the field engineer after proper surface preparation using appropriate machinery to remove rust / scales etc.

Labour charges for writing details in any finished surface/board including cost of enamel paints and other consumables as directed by the field engineer.

Labour for erection of cable in duct/trench/ clamping on structures - neat laying in the ducts with identification Aluminium tags in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer.

Up to 8 Core

Above 8 Core

Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer.

Supply and termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field engineer. (No.of core ends in unit of 1000).

Supply and erection of Vinyl Sticker cutting/ Printing on Vinyl Sticker/Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by field Engineer.

Supply and erection of "B" class GI pipe for extension of tandem/down pipe for AB switches and for any other work required as directed by field Engineer.

50 mm dia

Supply and provision of 12/25x3mm flexible braided copper / copper flats as required and as directed by the field engineer.

Supply & Crimping of Copper Lugs of Suitable sizes as required and as directed by the field engineer.

Supply and fixing Fuse unit of reputed make with ISI as directed by the field engineer including drilling & fixing.

Supply and fixing of HRC fuse of reputed make as directed by the field engineer.

Supply and fixing of Hylem board 8/10 mm thick wherever required as directed by the field engineer.

Supply and fixing of MCB of Havells/ Schneider/ MDS/ Reputed make with ISI mark wherever required as directed by the field engineer.

32 AMPS - 3 phase, 4 pole

16 AMPS - single phase, single pole

Supply and fixing of AC single/ 3 phase 4 pole 415V ISI mark changeover switch of reputed make iron glad metal switch as required and directed by the field engineer.

32 AMPS (single phase - DPDT)

Supply and fixing of Terminal blocks as directed by the field engineer.

Regular type (Non-disconnecting)

Disconnecting type (Link type)

Supply and provision of M8,M10,M12 and M16 (full /Half thread)G.I.bolt and nuts of various sizes including plate/spring washers as required and as directed by the field engineer.

Supply & fixing of LC/Key board out of 75x 25 mm Alu. frame embedded with 12 mm pre-laminated wood particle board using screw on rear side, 2 Nos plain glass sliding shutter of 5 mm thick fixed with metal roller on Alu.channel with locking arrangements, glass piece handle shutters, wall clamp as directed by the field Engineer including cost of all materials & all consumables.

Supply and fixing of godrej 6 lever navtol lock with triplicate keys for A.B.Switches and for any other purpose including the cost of ring and key token as directed by the field engineer.

Supply & providing of Mechanical foam type fire extinguisher with all accessories conforming to IS.

9 litre portable

Supply & providing of DCP (Dry Chemical Powder) type fire extinguisher with all accessories conforming to IS

25 kg Trolly mounted

10 kg Portable

5/6 kg Portable

Supply and fabrication of sand drums,(size of 580mm dia & 420 mm height)with conical cover made of tin sheet to be provided with handle including the cost of barrel and other consumables as directed by the field engineer inlcuding the cost of sand.

Supply & providing of fire buckets 10 Ltrs capacity

Typing & Printing of commissioning reports, Booklets, Drawing including spiral binding / stick file cost etc.,

Labour for Dismantling of Measurement transformers, reactor units, using Board's crane including all consumables.

11 KV Bus PT (Single units)

Labour for Dismantling of Battery set including consumables

Provision for the security arrangement in substations under erection from date of supply of 1st Board material to the contractor, till the date of commissioing.

Thiru. P.Ramesh

JK ENGINEERS

YAMINEE ELECTRICAL PROJECTS PRIVATE LIMITED