Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.0 LAccepted-AOC | L1 | Accepted-AOC Being lowest and reasonable | |
| 2 | L2₹29.3 L+₹3.4 L (13.3%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹31.1 L+₹5.2 L (20.2%)Rejected-Finance NO 45 5TH CROSS MALLAPPA LAYOUT BABUSAPALYA KALYAN NAGAR BANGALORE 560043 | BENGALURU URBAN | KARNATAKA | 560043 | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹31.7 L+₹5.8 L (22.5%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹33.0 L+₹7.1 L (27.6%)Rejected-Finance NO 4 AC 114 EAST OF NGEF OPP THE KARNATAKA STATE APEX CO OPERATIVE BANK KASTURI NAGAR BANGALORE 560043 | BANGALORE | BANGALORE | KARNATAKA | 560043 | L5 | Rejected-Finance Not being lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
21 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R nd D West Bengaluru
GARRISON ENGINEER I R nd D WEST BANGALORE DRDO COMPLEX CV RAMAN NAGAR BANGALORE BOQ or Schedule of works
CERTAIN REPAIRS REPLACEMENT WORK FOR MES INSTALLATIONS AT VARIOUS LOCATION IN ZONE II OF DRDO TOWNSHIP PHASE I C V RAMAN NAGAR BENGALURU
2022_MES_563127_1
GE(I)/R ND D/BAN/TOKEN/59 OF 2022-23 8116/E8
Open Tender
Civil Works
Item Rate
270 days
GE I R nd D West Bengaluru
Class and Category as per NIT
8 documents required · 8 mandatory
₹500
GE I R nd D West Bengaluru
₹70,000
Yes
23 Mar 2023
30 Dec 2022
27 Jan 2023
31 Dec 2022
21 Jan 2023
15 Jan 2023
31 Dec 2022 - 14 Jan 2023
Amount
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and disposing of debris outside MD land complete all as specified and as directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for; and disposing of debris outside MD land complete all as specified and as directed.
Demolition of Brickwork or stone/block masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and disposing of debris outside MD land complete all as specified and as directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (including backing), removing serviceable tiles to store and rubbish off the premises and disposing of debris outside MD land complete all as specified and as directed.
Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water, etc., and disposing of debris outside MD land complete all as specified and as directed.
Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening not exceeding 1.5 sq m each all as specified and as directed.
Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening exceeding 1.5 sq m, but not exceeding 4 sq m each all as specified and as directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground (Posts embedded in concrete) complete all as specified.
Dismantling of composite steel windows/ventilators not exceeding 0.60 Sqm double/triple leaf double shutter with fixed portion including taking down glass panes and mosquito proof mesh but except grill/ guard bars in any position complete all as specified and directed..
Dismantling of composite steel windows/ventilators exceeding 0.60 Sqm but not exceeding 1.80 Sqm double/triple leaf double shutter with fixed portion including taking down glass panes and mosquito proof mesh but except grill/ guard bars in any position complete all as specified and directed..
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, in roof covering.
Demolition of reinforced cement concrete of any description and in any position, (reinforcement cut as required to facilitate demolition) and disposing of debris outside MD land complete all as specified and as directed.
Dismantling of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons and disposing off rubbish outside MD land complete all as specified and directed.
Material and labour for Brickwork with sub class B bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed
Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly, hearted, built in CM 1:6 but except stone complete all as specified and directed.. Note :- Serviceable stones obtained from demolition of stone masonry shall be reused in the work.
Material and labour for Plain Cement Concrete (1:3:6) type C0, using 12.5 mm graded stone aggregate as in filling the Chowkats/frames complete all as specified and as directed.
Material and labour for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.
Material and labour for providing 75 mm Plain Cement Concrete in (1:4:8) mix, type D2 ,using 40 mm graded stone aggregates as in sub-base , pavers etc complete all as specified and as directed.
M&L for Reinforced cement concrete (Nominal Mix) Type B-1, 1:2:4 mix (using 20mm graded crushed stone aggregate) in foundation, including rafts, footing, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles & mass concrete complete all as specified and directed.
M&L for Reinforced cement concrete (Nominal Mix) Type B-1, 1:2:4 mix (using 20mm graded crushed stone aggregate) as in Columns, pillars, piers, posts, & struts complete all as specified and directed.
Material and labour for, Pre-cast Reinforced Cement Concrete, (1:2:4), type B1 using 20 mm graded stone aggregates as in cover slabs of manholes, gully traps, drains, etc., set in CM(1:4) complete all as specified and as directed. NOTE :- Steel for Reinforcement will be measured and paid separately.
Material and labour for, Plain Cement Concrete, (1:2:4), type B1 ,using 20 mm graded stone aggregates as in coping including necessary forms and moulds, finishing the surfaces fair and even, complete all as specified and as directed.
Supply only liquid water proofing compound all as specified and as directed.
Supply and fix, Pressed steel door frame of size 105 x 60 mm using 1.25 mm thick sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
Supply and fix 35 mm thick plain framed paneled factory made shutters (two panel) with II nd class hardwood rail and style with lock rail and panel of 9 mm BWP commercial ply with commercial veneer on both faces. The size of rail and style as per IS - 1003 Part - I , kiln seasoned and chemically pressure treated complete all as specified and as directed.
M&L for Formwork to sides of concrete foundation, footings, bases of columns, rafts & rafts beams, sides & soffits (if any) of foundation & plinth beams; & similar work; vertical or to batter complete all as specified and directed.
M&L for Formwork to sides of pillars, columns for rough finished surfaces of concrete etc complete all as specified and directed.
M &L TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 9 mm dia complete all as specified and directed.
M &L TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending and binding with and including mild steel wire (annealed) not less than 9 mm dia complete all as specified and directed.
Supply and fix, Stainless steel Butt hinges, 100 mm long fixed with screws complete all as specified and as directed.
S&F 100mm Butt hinges medium weight cold rolled mild steel all as specified and directed.
Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and as directed.
Supply and fix 150 mm Aluminium extruded alloy anodized handles, cast type complete all as specified and as directed.
Supply and fix, 300 mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
Material and labour for, Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall including dismantling existing roof covering, fixed with self tapping screws, complete all as specified.
S&F 1.25 mm thickness steel rolling shutters with ball bearing , as specified including top cover, anchoring rod,hasp and staple and one shop coat of primer erected in position as indicated complete push pull or manual type all as specified and directed
Refixing/Tightening Chain link fencing of MS galvanized wire of 3.5mm dia and size of mesh 75mmx75mm and fixed to any type of post, rail with straining bolts including provision of binding wire complete all as specified and as directed
Supply and fix powder Coated aluminium frames and shutters (minimum thickness of powder coating 50 microns) and fabricating of doors, windows, ventilators and fixed partitions with one or more rebates including necessary joining cleat, glazing clips, rubber neoprene packing for fixing, including minor fitting like lock, handle, roller for sliding etc. complete all as specified Note :- i) For payment purpose weight of aluminium section shall be measured and paid, ii) Cost of aluminium mongery. lock, rubber packing, rollers for sliding shall be deemed to include in the quoted rate, iii) Sheet glass and wire gauge shall be measured and paid for separately under respective items.
S&F Rolled mild steel Framed work as in angle iron chowkats for doors or gates of angle or other section with gusset plates,sheet, rails, braces, etc., complete, also fastening & fixing complete of grade Fe410-0 or Fe 310-O including taking down old wooden frame of any size and any description.
S&F Expanded metal weight not exceeding 4.00 Kg per Sqm, cut to length, bent to shape required & tying with including necessary welding to steel frame work complete all as specified and direceted.
M&L for Mild steel posts and struts in wall fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., including embedding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed by the Engineer-in-Charge
Taking down existing barbed wire fencing, supply and fix, new barbed wire fencing, galvanized, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.
S&F in repair Chain link fencing with MS galvanized wire of 3.5mm dia and size of mesh 75mmx75mm and fixing to any type of post, rail with straining bolts including provision of binding wire complete all as specified and as directed
Material and labour, for 25 mm thick Plain Cement Concrete 1:2:4, type B0, using 12.5 mm graded stone aggregates as in floor finishing's, finishing the surfaces rough and even to receive screed bed / bedding layer complete all as specified and as directed.
Material and labour, for padding concrete / leveling course over slabs with Plain cement concrete (1:2:4), type B0 (using 12.50 mm graded stone aggregate), laid to achieve proper slope as per site conditions, surfaces finished fair to receive screed bed including mixing water proofing treatment, complete all as specified and directed. Note : - Supply only water proofing compound will be measured and paid for separately under respected item.
Material and labour, for 75 mm thick Plain Cement Concrete (1:3:6), type C2, using 40 mm graded stone aggregates as in paving / plinth protection, laid in panels, finishing the surfaces even and fair complete all as specified and as directed.
Material and labour for non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m, as in flooring, set and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.
Material and labour, for coloured Glazed ceramic printed tiles, of size 450 x 300 x 7 mm thick (Grade B-IIA) as in vertical surfaces such as skirting, dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including provision of backing coat of 10 mm thick rendering in CM 1:3, complete all as specified and directed.
M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specfied and directed.
M&L non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles laid over and including 10mm thick rendering in CM (1:3) complete all as specfied and directed.
M&L for providing Chequered cement concrete Tiles 25 cm X25 cm X 20- 22mm /30cm x 30cm x 20 to 22mm thick of with grey cement and pigment set jointed and pointed in neat cement slurry in floors , laid over 15mm screed in CM 1:4 all as specified and as directed.
M & L for providing 20 mm thick Granite work (of any type), table rubbed and mirror polished), in single piece in steps, jambs, pillars, window-cills, cooking platform and like set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, making hole for gas pipe, edges made half round, laid over and including screed bed or bedding layer of 15 mm thick in CM (1:4), complete all as specified and as directed.
Material and labour for Rendering 15 mm thick on brick or concrete surfaces of walls in cement mortar 1:4 including mixing with approved water proofing compound, and finishing the surfaces even and fair without using extra cement all as specified and as directed. NOTE:- Supply only WPC will be measured and paid separately under relevant item of BOQ.
Material and labour, for rendering 15mm thick on stone wall surface in cement mortar 1:4 and finishing the surface with even and smooth without using extra cement all as specified and as directed.
Material and labour, for rendering 10 mm thick in Cement mortar 1:6, on brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed
Material and labour, for rendering 5 mm thick on brick or concrete ceiling surfaces in cement mortar(1:3) and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.
Preparation of new or previously untreated plastered WALL surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 2 mm thick wall care putty, complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.
Preparation of new or previously untreated plastered CEILING surfaces of any description not otherwise described and applying two coats of oil bound distemper over a coat of alkali resistant primer over and including 2 mm thick wall care putty, complete all as specified and as directed. Note : Quoted rate shall deemed to include for cost of wall care putty.
Complete removal of existing treatment and preparing the surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over 2 mm thick wall care putty complete all as specified and directed. Note : Quoted rate shall deemed to include for cost of wall care putty.
Complete removal of existing treatment and preparing the surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer over 2 mm thick wall care putty complete all as specified and directed. Note : Quoted rate shall deemed to include for cost of wall care putty.
Preparation of newly plastered wall surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of weather proof exterior emulsion paint over a coat of weather proof primer complete all as specified and as directed.
Preparing the old plastered surfaces of walls and applying one coat of weather proof exterior emulsion paint complete all as specified and directed.
Preparation of new wooden surfaces exceeding 10 cm in width or girth, applying two coats of synthetic enamel paint over a coat of red oxide pink primer complete all as specified and as directed.
Preparation of new steel surfaces exceeding 10 cm in width or girth, applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth applying one coat of synthetic enamel paint complete all as specified and as directed.
Supply and fix Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 in each pane all as specified and as directed.
Supply and fix, stainless steel wire cloth 0.36 mm nominal dia of wire, and of average width of aperture 1.4 mm, fixed with stainless steel wire staples / wooden beading complete all as specified and as directed.
Taking down unserviceable GI tubing, supply and fixing new 15 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.
Taking down unserviceable GI tubing, supply and fixing new 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.
Taking up or down 20 mm dia, GI tubing and connections, cleaning, re-fixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.), after cleaning and application of bituminous paint in concealed portion of tubing, including cutting and threading pipe and provision of additional fittings such as sockets, tee, elbows, unions, (if required) complete all as specified and as directed. Notes: i) Taps, valves in any shall be removed before taking down pipe, ii) Cutting chases for concealed piping shall be measured and paid separately under respective item.
Supply and fix in repairs, 32 mm dia, PVC waste pipe of length not less than 800 mm, complete all as specified and as directed.
Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, UPVC (SWR) pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.
Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, UPVC (SWR) pipes 75 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.
Supply and fix in repairs, UPVC (SWR) vent cowl of bore 110 mm dia, complete all as specified and as directed.
Supply & fix 75mm dia outlet PVC Nahani trap with grating as fixed in repairs complete all as specified and as directed. Make: Supreme or equivalent
Supply and fix, PVC connecting pipe 600 mm long 15 mm dia both ends having brass coupling nut and PVC washer after taking down old connecting pipe complete all as specified and as directed.
Supply and fix in repairs, Vitreous china, white colour, 'Orissa pattern' squatting pan of size 580 mm x 440 mm with UPVC 'P' trap or 'S" Trap, front or back inlet, integral foot rests, connecting to trap, flushing pipe, anti syphonic pipe, complete, all as per Make : Cera, Cat No S3010102 of CALINA make or techno commercially equivalent in other makes specified complete all as specified and directed.
Supply and fix in repairs, PVC valve less, syphonic action type, white colour flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including jointing with new PVC long / short flush bend and making good to the disturbed surfaces complete all as per Model No: CIENA PREMIUM Cat Part No B1010102 of CERA Make or techno commercial equivalent in other makes complete all as specified and as directed.
Taking down old sinks and Supply and fixing Stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen over all size 915 mm x 460 mm with bowl size 405 x 355 x 178 mm all as per Cat No.SSSBSD-52 of Blue Star make or techno commercially equivalent in other makes specified including CP waste coupling of 40 mm dia, cast iron cantilever brackets, 40 mm dia 800 mm long corrugated PVC waste pipe, washers, connecting union etc. complete all as specified and as directed.
Supply and fix in repairs Health faucet, with 8 mm dia, 1.2 m long, flexible tube in chrome finish, wall hook with NRV (back flow preventer), all as per Cat Part No F160023 of Hindware or techno commercially equivalent in other makes complete all as specified and directed.
Supply and fix in repairs, Bib taps 15 mm dia, fancy type, chromium plated with CP flange all as per Cat No. F280002 of Hindware or equivalent in other makes specified complete all as specified and as directed.
S & F 15 mm CP stop valve (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union including taking down valve all as specified and as directed.
Supply and fix Pillar taps, 15 mm dia, fancy type, chromium plated with CP flange, long shank all as per Cat No. F280001 of Hindware or equivalent in other makes specified here-in-after, after taking down old pillar taps complete all as specified and as directed.
Supply and fix in repairs, Angular stop cock, fancy type, with chromium plated wall flange, cast copper alloy, screwed both ends for iron pipe or for brass ferrule,15mm dia, complete all as specified and as directed. MAKE:- Cat No. F280004 of Hindware or techno-commercially equivalent makes specified in list of makes here-in-after.
Supply and fix in repairs, brass chromium plated, fancy type, soap dish, as per Cat Part No F840006 of Hindware or equivalent in other makes, and fixing with brass screws, complete all as specified and directed.
Supply and fix in repairs, Vitreous china snow white, wash hand basin of size 550 mm x 400 mm all as per Cat No. No. S2040103 of Cera or techno and commercial equivalent makes specified including supply and fixing 32 mm dia, PVC corrugated / flexible waste pipe, 800 mm long and with PTMT waste coupling of 32 mm dia (minimum weight 45 grams), all as specified and as directed.
Supply and fix in repairs, single tube towel rail, brass chromium plated, 600 mm long fixed with chromium plated screws and PVC cleats, complete all as specified and as directed. Make : Hindware, Model No F880005 or techno and commercial equivalent complete all as specified and as directed.
Preparing the roof top surfaces, by sweeping and removing all loose dirt, providing cement screed bed as mentioned bleow on prepared surface and providing APP based polymeric membrane minimum weighing 3.5 kg / sq.m and minimum 3 mm thick reinforced with polyester non woven fabric (weight not less than 160 gms / sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 litre/sq.m by torched application, complete all as specified and directed. The complete roof treatement shall be consisting of as under and rate quoted shall deemed to inlcude for :- (i) 10 mm thick cement screed bed in CM 1:3 mixed with water proofing compound (Supply only water proofing compound will be measured and paid for separately under respective item) (ii) Applying one coat of bituminous primer conforming to IS-3384 @ 0.3 litre / sq.m (iii) Laying of APP based membrane of specified thickness and weight. (iv) Applying one coat of aluminium paint @ 100 ml / sq.m Note: All side and laps shall be trowelled and finished with sealent to ensure proper bonding and effective treatment.
Dismantling of water tanks of 500 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (triple layered) of 500 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
Ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball scrured for iron pipe of dia 20 mm bore complete all as specified and directed .
Uprooting shrubs / plant /flora / fauna on walls, girth not exceeding 100 mm, cutting holes in walls, digging out roots applying sulphuric acid / phenolic acid as per manufacturers instructions to burn out deep grown roots and making good the surface using CM 1:3 (mixed with and including water proofing compound) complete all as specified and as directed. (Note : The height of walls is up to 16 m, necessary cost of scaffolding shall deemed to be included in quoted rate.)
K R Koteswara Rao
M/S Suresh Raju
S.R.V.Builders
Sai Ram Builders
MAA ENGINEERING SERVICERS
Solar Electricals and Electronics
Meghana and Gowda Enterprises
MSA Constructions
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .