Construction of Market Complex 1st Floor Phase-II in the plot of Lumding Municipal Board at Veterinary Hospital road in Ward no-11,under 14th FC 1st installment for the year 2018-19

Amount

5.2.2>REINFORCED CEMENT CONCRETE WORKS(ABOVE PLINTH) Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc…… 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Form Work Centering and shuttering including strutting, propping etc. and removal of form for

5.9.6>Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.5>Lintels, beams, plinth beams, girders, bressumers and cantilevers

5.9.3>Suspended floors, roofs, landings, balconies and access platform

5.9.7>Stairs, (excluding landings) except spiral-staircases

Brick Work

6.13.2>Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Wall Tiles

8.31>Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size …….

Flooring

11.41.2>Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make..……. Size of Tile 600 x 600 mm

11.41A.3.1>Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer……. Glazed Vitrified tiles Matt/Antiskid finish of size. (Size of Tile 600 x 600 mm)

11.56.2>Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand)........ Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red

Plastering

13.1.1>CEMENT PLASTERING (In Fine Sand) 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand)

13.2.1>CEMENT PLASTERING (In Fine Sand) 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand)

Wood Work

9.1.2>Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position......... Sal wood

9.5.1.1>Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size........ Second class teak wood 35 mm thick shutters

9.21.1>Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Steel Work

9.48.2>Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat ........ Fixed to openings /wooden frames with rawl plugs screws etc.

10.28>Providing and fixing stainless steel( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete……….

Aluminium Work

21.1.2.2>Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285...... For shutters of doors, windows & ventilators including...... Powder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.2>Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc......... With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Painting

13.8>Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.82.2>Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

13.50.1>Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

13.50.3>Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

13.61.1>Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Door Window Fittings

9.97.1>Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) b) Tower bolts(300x10) mm

9.97.5>Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) b) Tower bolts(100x10) mm

9.100.1>Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) 150mm

9.103>Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles

Reinforcement

5.22.6/ 5.22A6>Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding…….. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Sanitary and Water Supply

17.3.1>Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow...... W.C. pan with ISI marked white solid plastic seat and lid (3- WC, 3 URINAL PAN)

17.7.2>Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern...... White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap

17.69.1>Providing and fixing PTMT Waste Coupling for wash basin and sink.... Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

18.27.1>Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 100 mm dia pipe

18.26.1>Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc..... Up to 300 mm dia

18.30.2>Providing flanged joints to double flanged C.I./ D.I. pipes and specials..... 100 mm diameter pipe

18.13.1>Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. ..... 25 to 40 mm nominal bore

18.49.1>Providing and fixing C.P. brass bib cock/sink cock and piller cock....... 15 mm nominal bore

18.52.1>Providing and fixing C.P. brass stop cock (concealed)....... 15 mm nominal bore

17.32.4>Providing and fixing mirror of superior glass (of approved quality)....... Rectangular shape 1500x450 mm

18.48>Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Electrification

Internal electrification of total civil works

External electrification of total civil works

ARNAB BHATTACHARJEE (BID ID -260546)