SPECIAL REPAIR TO BUILDING NO P-90 (06 MD ACCN), P-335 AND P-336 (SHIVALIK HALL) AT SUNJUWAN UNDER GE JAMMU

Amount

B/R Portion:- Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing unserviceable material outside cantt area complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc all as specified and removing unserviceable material outside cantt area all as specified and as directed.

M&L 50 mm thick PCC 1:3:6 type C-1 (20 mm graded stone aggregate) as in plinth protection,finished even and smooth without using extra cement all as specified and as directed.

M&L Non skid ceramic coloured designer seamless tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in CM 1:6 complete all as specified and as directed.

All as per Ser item No 5.00 above but as in skirting including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L Glazed ceramic coloured designer seamless tiles 300x450x7 to 8 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM 1:4 all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings,steps, cills, sunshades, shelves,lintels, etc; and cutting chases for concealed water tubing ,etc., and making good, cutting not exc 10 cm girth (in brick walls) all as specified and as directed.

Taking down GI tubing of 15 mm dia and connections incl cleaning for refixing or removal all as specified and as directed.

Taking down GI tubing of 20 mm dia and connections incl cleaning for refixing or removal all as specified and as directed.

S&F 15 mm dia galvanized pipes 'Medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and as directed.

S&F 20 mm dia galvanized pipes 'Medium grade' with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and as directed.

Refixing only 15mm dia tubing and connections in new or old position including cleaning old tubing all as specified and as directed.

Refixing only 20mm dia tubing and connections in new or old position including cleaning old tubing all as specified and as directed.

S&F Bib tap cast copper alloy, chromium plated fancy type 15mm dia with capstan handle screwed down, screwed for iron pipe or for brass ferrule fixed in repairs all as specified and as directed. Make: - Jaquar, Cera, Artize, Kohler.

S&F in repairs brass chromium plated shower rose 125mm size fancy type, with CP neck 9 inch long with swivel joints, including fixing to steel pipe or union of 15 mm bore all as specified and as directed. Make: - Jaquar, Cera, Artize, Kohler.

S & F Stop valves cast copper alloy 15 mm dia, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with capstan handle screwed both ends for iron pipes or for unions and fixed all as specified and as directed.

S&F tubular towel rail, 20mm dia, D type and 60cm long between flanges of Brass chromium plated all as specified and as directed.

S&F in repair PVC low level flushing cistern valve less,syphonic action type of 10 ltrs capacity white with inlet, ball valve, float valve and handle incl brackets, PVC flush pipe 32mm dia ,PVC connection 15 x 450 mm long, fancy type chromium plated angle valve of 15 mm bore dia complete all as specified and as directed.

S&F in repairs Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flush pipe and joints complete all as specified and as directed by Engr-in-Charge. Make: - Jaquar, Cera, Artize, Kohler.

S&F in repair vitreous china white wash hand basin flat back size 550x400mm including CI/MS brackets including cutting for and pinning in brackets including 32mm dia wastepipe, chromiumplated coupling, 15mm x 450mm long PVC connection, CP pillar tap 15mm dia, CP angle valve 15mm dia all as specified and directed.

S & F stainless steel sink with drainage board,made of 1.00mm thick sheet for kitchen or laboratory with plug,washers waste pipe including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets,connecting union to pipe, overall size 915mmx460mm, bowl size 410x330x160mm all as specified and as directed. Make: - Nirali, Bluestar, Neelkanth.

S&F kitchen plate rack of stainless steel of size 720 x 600 x 230mm made out of 1mm thick stainless steel sheet all as specified and directed.

Dismantling of water storage tank of any capacity and removing from site all as specified and as directed.

S&F rotational moulded polyethylene water storage tank , plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltrs including making connections on four storey building roof complete all as specified and as directed. Make: - Sintex, Rotex, Vectus.

S&F Ball valve of 20mm dia bore high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.

S&F Stop valve cast copper alloy 20 mm dia, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for unions fixed in repairs all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar all as specified and as directed.

M&L granite 15 to18mm thick (PURE BLACK) (table rubbed and polished) as in steps, jambs, pillars, window cills cooking platforms and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over & including 15mm thick screed in CM 1:4 Edges of slab to be rounded from all sides. (including cutting and polishing) all as specified and as directed.

S&F 75mm dia CI floor trap, with grating including jointing with solvent cement all as specified and as directed.

S&F in repair cover of CI oval acess door with bolts and rubber gasket to make it water tight for 100 mm bore CI bends complete all as specifed and directed by Engineer-in-charge.

S&F in repair cover of CI oval acess door with bolts and rubber gasket to make it water tight for 75 mm bore CI bends complete all as specifed and directed by Engineer-in-charge.

S&F PTMT Peg set 45cm long and 50mm wide with five aluminium hooks all as specified and as directed.

S&F CP soap dish 100mm x 75mm as per sample kept in office of AGE complete all as specified and as directed.

Taking down chowkats or frames with shutters (w/o taking off shutters from the frames ) not exc 1.5 sqm each, including cutting holes for taking out holdfasts or dismantling brick work(holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish(without any extra cost to Govt), & removing from site complete all as specified and directed by Engr-in-charge.

Description all as per Ser item No 36.00 above but exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.

Taking down door shutters exc 1.00 sqm but not exc 2.00 sqm and refixing the same opening after easing adjusting all as specified and directed.

Taking down chowkats or frames of cup boards with shutter with out taking off shutter from the frames not exc 4.00 Sqm each including cutting holes for taking out hold fast or dismantling brick work ( holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt) all as specified and as directed.

S & F Factory made Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 nos 25x25x3mm thick angle iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and holdfasts all as specified and as directed.

S & F Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 nos 25x25x3mm thick angle iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and holdfasts all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as specified and as directed. Make: - Ecocell, Rajshri Plastiwood Ltd, Sintex or equivalent.

S&F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification and drawing in SSR 2010 part-II on page 156 all as specified all as specified and as directed. Make: - Ecocell, Rajshri Plastiwood Ltd, Sintex or equivalent.

S&F 30mm thick factory made flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed. Make: - M/s Centuryply, Archid, Action Tesa, Jain wood Industries.

S&F Factory made glazed and Skelton shutters 35mm thick of 2nd class hardwood,open rebated and prepared to receive glass, guaze etc (Without Sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc;sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); suppplied and fitted to chowkats all as specified and as directed.

S & F 18/19 mm thick Prelaminated Particle board, interior grade ,prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws/nails to iron frame work as in shelves, cup board shutters etc including fixing of Plain fillets square or rectangular of 2nd class hard wood of size n exc 3 sq cm as in leaping to shutters/shelves compete fixed all as specified and directed.

S&F PVC knobs fancy type for cup board shutters of size 40mm dia as per sample all as specified and as directed.

S & F Hasp & staple size 100 mm, alumium anodised, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws all as specified and as directed.

S&F galvanized mild steel wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples all as specified and as directed.

Description all as per Ser Item No 49.00 above but fixed in repairs complete all as specified and as directed.

S&F Aluminium handle, cast type, anodised size 150mm long all as specified and as directed.

S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 200mm all as specified and as directed.

S&F MS sliding bolt 250 mm with hasp, staple (bolt type) and fixing bolts clips of sheet, cast extruded sections and fixing bolts and sliding bolts of extruded sections all as specified and as directed.

S&F Steel locking bolt with mild steel electrogalavnised plate and bright bolt not less than 10mm dia, 100 mm size all as specified and as directed.

S&F Mild steel Helical door spring 150mm including roller and roller plate complete all as specified fixed with screws or welding as required fixed in repairs all as specified and as directed.

S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S & F 3 mm thick ordinary glass sheet quality and glazing with oil putty in squares n exc 0.5 sqm in each pane all as specified and as directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane all as specified and as directed.

S & F Drapery curtain rods, fancy type, coloured, 25mm dia with end knobs, and MS brackets complete fixed on walls with rawl plugs complete all as specified and as directed.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement up to four storey bldg complete all as specified and as directed.

M&L for Rendering 10 mm thick in CM 1:3 on fair face of concrete surfaces finished even and smooth without using extra cement as in ceiling etc. up to four storey bldg complete all as specified and as directed.

M&L for Rendering 15 mm thick in CM 1:4 on fair face of brick work surfaces finished even and smooth without using extra cement up to four storey bldg complete all as specified (including all necessary scaffolding, lifting arrangement for external surfaces) all as specified and as directed.

M&L Rendering 15-20mm thick in CM 1:4 on concrete surface including two or more dubbing coat including necessary formwork and scaffolding surface finished even and smooth without using extra cement such as chajjas, upward fascias and similar items up to four storey bldg all as specified and as directed.

M&L for preparing new plasered surface applying one layer of birla wall care putty and applying two coats of oil bound distemper over a coat of primer on new surfaces of wall all as specified and directed.

M&L applying two coats of cement base paint including preparation of new plastered surface including primer with wall putty on walls complete all as specified and as directed. Note: All chajja and Facias will be applied two coat of weather proof paint with out any extra coat.

M&L applying two coats of oil bound distemper on ceiling with primer and wall putty including preparation of new plastered surfaces complete all as specified and directed.

M&L Applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including preparation of new surface over 10 cm width or girth all as specified and directed.

M & L complete removal of existing treatment by washing, rubbing down, scraping and applying one layer of birla wall care putty and applying two coat of oil bound distemper over a coat of primer complete all as specified and directed.

M&L Applying one coat of synthetic enamel paint on old wooden surface including preparation of old surface of any description over 10 cm width or girth all as specified and directed.

M & L Applying one coat of synthetic enamel paint on existing steel surface including preparation of old surface of any description over 10 cm width or girth all as specified and directed.

M & L Applying two coat of synthetic enamel paint over a coat of zinc primer on new steel surface including preparation of surface of any description over 10 cm width or girth all as specified and directed.

M&L applying one coat of cement base paint including preparation of old plastered surfaces of walls,chajjas,facia etc up to four storey bldg complete all as specified and directed. Note: All chajja and Facias will be applied two coat of weather proof paint with out any extra coat.

M&L Applying one coat of white wash on wall including preparation of old plastered surfaces complete all as specified and directed.

M&L Applying one coat of white wash on ceiling including preparation of old plastered surfaces complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L half brick thick brick work with sub class "B" bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed.

M&L brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 all as specified and directed.

Demolition of cement concrete in roofs,floors (other than ground floors), beams, staircases, landing, chajjas and removing unserviceable material outside cantt area all as specified and directed.

Removing existing treatment from roof surfaces such as tiling, tarfelt, fungus,moss,dust etc.,cleaning the surface of all foreign material by wire brushing and dusting and racking out RCC slab complete all as specified and directed and removing the debries outside defence land.

Supply only integral water proofing compound to incorporate in above item all as specified and directed.

Applying bitumen primer @ 0.30 kg/sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.50 kg/sqm reinforced with non woven polyester mat weighing not less than 160 gm/sqm, having softening point not less than 800 N /Sq cm, tearing strength of 180N, with minimum of 10 cm side laps and 15cm end laps, laying by application of torch, and applying industrial bitumen 85/25 @ 1.2 kg/sqm on top surface complete all as specified and directed.

S&F in repairs 125 mm dia CP grating with or without hole fixed in position complete all as specified and directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for Cement concrete, complete all as specified and directed.

S&F Framed work such as grills,gratings etc with ends of bars shouldered and/or riveted or forged into spikes,framed guard bars ,barred iron doors,ladders ,framed balusters,walk ways,railing,frame work of water tanks, Cupboard frame etc (including cutting holes in brick masonery walls and fixed with PCC 1:11/2:3) and similar work confirming to Fe.290.Gde-E-165 all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails all as specified and directed.

GI Clip-in plain False Ceiling System with tile (600mm X 600mm) is manufactured out of 0.50mm. These tiles shall have square edges / beveled edges. Two sides of each tile are raised and piped and stopped to ensure positive engagement into the spring Clip-in-profile, yet allow for demounting of individual tiles. The rigid suspension system consists of rows of 0.50mm galvanized 100 to 120gsm/M2 steel Clip-in-profiles of size 38mm X 20mm and installed at 600mm c / c spacing to support the tiles, clip-in-profiles are suspended and jointed from galvanized steel C Channels of size 10mm X 38mm X 10mm with hold on clamps. Suspension Angles are suspended from the roof structure by GI Ceiling Brackets and joint to the C Channels. The tiles are held in place by pressure clips. In the flexible system the Hanger and suspension clips replace the suspension angle. Wall angles or edge profiles are of size 24mm X 24mm and 0.4mm thick with matching the color with tiles. Makes: - ARMSTRONG, HUNTER DOUGLES, HI STEEL, SAINT GOBAIN, DURLUM, PR CEILINGS.

S&F Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS sheet tube factory made with double side shutters wire gauged shutter&glass glazed shutter (wire cloth and glass panes will be measured and paid separately)with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos MS Tower bolts 150 mm long for each leaf and 8 mm square bar grill/guard bars at spacing as shown on Drg welded MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fasts , with cooler opening etc all as shown on Drg No CEPZ/TD -354/09 sheet 1/3 to 3/3 including one coat of of red oxide zinc primer all as specified and directed.

M&L Applying two coats of Weather proof paint including preparation of new plastered surface on walls complete all as specified and directed.

Complete removal of existing treatment of external walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforscent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with, filling cracks with wall putty and brooming to remove all dirts etc and applying two coats of weather proof paint exterior grade over one coat of primer all scaffolding arrangement up to four storeyed building complete all as specified and directed. Note: - The weather proof will be done by the approved company and warranty of 4 years with MoU between the contractor and the applicator and this is given by the contractor as per direction of Engr-in-Charge.

M&L brick work with sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 but except bricks complete all as specified and directed.

M&L Two coats of apex paint over one coat of primer over one coat of Birla white putty including preparatory work and all scffolding arrangement up to three storeyed building all as specified and directed.

E/M Portion:- Taking down old unsv copper/aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and directed.

Taking down old and unserviceable submain wiring any size of two core & incldung earth wire complete including batten/ conduit and make good the disturbed surface to match the existing surface, all as specified and directed by Engr-in-Charge.

Taking down old and unserviceable, distribution board any type including MCBs etc after removing all connection and make good the disturbed surface all as specified and directed by Engr-in-charge.

M&L for point wiring controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into existing concealed PVC rigid/steel conduit 1.8mm wall thickness ISI marked terminated into existing CI/pressed steel terminal boxes including removing 3.00mm thick hylam, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note : (a) wiring shall be done by using proper colour coding (b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge.

One light point/fan point/bell point controlled by one switch all as specified and directed.

One 5 Amps 3/5 pin socket outlet on the same board with other switch complete all as specified and directed by Engr-in-Charge.

One 5 Amps 3/5 pin socket outlet on the independent board with other switch complete all as specified and directed by Engr-in-Charge.

All as per item No 98.00 above here-in-before but wiring with 2.5 sqmm copper cable with 1.5 sqmm copper cable as continuous earth wire for 5/6 pin 16 Amps socket out let on independent board with other switch complete all as specified and directed by Engr-in-Charge.

M&L for point wiring for one light/fan/5 Amps independent socket point/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into an including new concealed PVC rigid/steel conduit 1.8mm wall thickness ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified. Note : (a)The rates coated includes cutting the wall /ceiling (35cm x 45 cm) and filling with cement mortor 1:3 after fitting the PVC conduit as mentioned above complete with colour matching etc. (b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge.

One light point/fan point/bell point controlled by one switch all as specified and directed.

One 5 Amps 3/5 pin socket outlet on the same board with other switch complete all as specified and directed by Engr-in-Charge.

One 5 Amps 3/5 pin socket outlet on the independent board with other switch complete all as specified and directed by Engr-in-Charge.

All as per item No 100.00 above here-in-before but wiring with 2.5 sqmm copper cable with 1.5 sqmm copper cable as continuous earth wire for 5/6 pin 16 Amps socket out let on independent board with other switch complete all as specified and directed by Engr-in-Charge.

Supply & fixing only switch piano flush button type 05 Amp single pole, one way complete all as specified and as directed.

Supply & Fixing only switch piano flush button type 15 Amps SP one way complete all as specified and as directed.

S&F only socket outlet multi purpose 3 pin 2 pin 05 Amp flush type complete all as specified and as directed.

S&F only socket outlet multi purpose 6 pin and 3 pin, 15 Amp flush type complete all as specified and as directed.

S&F ceiling rose surface bakelite 2 to 3 terminals PVC/Poly carbonate/Isolated body 65 x 50 mm size complete all as specified and as directed.

S&F only fan regulator resistance type and making all necessary connection to the regulator complete all as specified and as directed.

Supply & fixing only bell push flush type 5 Amps completer all as specified and as directed.

Supply and fixing bell AC 230V single pole complete all as specified and directed.

M& L in replacement for Lamp holder, insulated body , with back plate suitable for batten fittings complete all as specified and directed.

M& L in replacement Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K all as specified and directed.

S&F in replacement new generation energy saving , wall mounted LED Tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED 6500K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz all as specified and directed.

S&F LED Bulk head fitting of cap 10 watt Aluminium PDC housing,toughened glass cover with IP 65 protection complete wth LED Bulb all as specified and directed by Engr-in-charge.

S&F 2 Feet x 2 Feet size recess mounting Energy efficient LED light bottom opening panel duly powder coated CRCA Steel housing IP 65 High quality polycarbonte body & aluminium plate heat sink, high quality diffuser, separate HPF driver suitable ceiling of 2'x2' complete with necessary cutting and drilling holes all as specified and as directed.

S & F of Energy Saving Endura Cityliner, LED street light fitting 45 watt comprising a single piece, environment friendly light fittings including electronic driver, luminaire housing is of pressure die-cast alluminum alloy LM24 for gear and extruded aluminium lamp housing, operating Voltage range is from 85 Volts to 264 Volts AC 50 Hz all as specified and directed.

S & F and fabrication bracket made out of GI tubing suitable for 45 watt LED light, light grade upto 1.2 mtr length, bend to shape suitable for security light fitting with necessary MS clamps with one coat of red oxide and two coats of aluminium paint including nut, bolt, washers etc and including taking out unserviceable bracket and removing from site of work complete all as specified and as directed.

S& F Change over 2 pole 63 Amps 240 volts with necessary drilling work required to wall and connecting input and out put wires as required at site complete all as specified and directed.

S&F DB Sheet metal enclosures double door, factory made, made out of CRCA mild steel sheet 1.2 mm thick with matellic painting, FP-42 protection surface mounting 240 volts, 200 Amp rated enameled neutral bus bar 4 way dust and vermin proof suitable for incorporation of Isolator / MCBs duly concealed in wall and making good the distrubed surface and colour matching complete all as specified and directed.

S&F DB Sheet metal enclosures double door, factory made, made out of CRCA mild steel sheet 1.2 mm thick with matellic painting, FP-42 protection surface mounting 240 volts, 200 Amp rated enameled neutral bus bar 8 way dust and vermin proof suitable for incorporation of Isolator / MCBs. duly concealed in wall and making good the distrubed surface and colour matching complete all as specified and directed.

S&F MCB single pole 240 volts, 06 to 40 Amps,"B" series 10 KA complete all as specified and directed.

S&F MCB single pole neutral 240 volts, 40Amps, ,"B" series 10 KA complete all as specified and directed.

Re- filling the wall from where the DB board is replaced after fitting the DBs in wall with sub - class ' B ' bricks, straight or curved on plan to any radius inhalf brick thick walls built in cement mortar with ratio 1:6 complete all as specified and directed by Engr-in-Charge.

M&L in replacement for Sub main wiring with proper colour coding, insulated, unsheathed, multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLS, drawn through in new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length. Note : Wiring shall be done in proper colour coding.

Supply and fixing MCB SPN 63 amps 415 volt complete all as specified and directed.

S&F Meter board for housing elctrical meter with transprent lid tempered proof with suitable locking arrangements including removing existing electricmeter and refixing to wall all as required complete all as specified and directed.

Taking down ceiling fans/Exhaust fan, sealing cable end, dismantling blades and removing fan and blade to store of safe place of contractor for refixing after repair and painting of Bldg all as specified and directed.

Hanging only ceiling fan/Exhaust fan connecting up including provision of cable from ceiling rose or connector to fan and rubber reel etc complete all as specified and directed by Engr-in-Charge.

S&F in replacement unsv wooden/CI Shunken box with new CRCA presseed steel terminal box of size 7X4' incl taking down old complete with cemented and patch work all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement Bakalite hylum Sheet 3 mm thick complete with cutting and making size for fixing switches (06 Nos each) of size 8''X5'' including removing old switches/sockets all as specified and directed.

S&F in replacement unsv wooden/CI Shunken box with new CRCA presseed steel terminal box of size 4X4' incl taking down old complete with cemented and patch work all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement Bakalite hylum Sheet 3 mm thick complete with cutting and making size for fixing switches (02 Nos each) of size 5''X5'' including removing old switches/sockets all as specified and directed.

S&F in replacement unsv wooden/CI Shunken box with new CRCA pressed steel terminal box of size 10X8' incl taking down old complete with cemented and patch work all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement Bakalite hylum Sheet 3 mm thick complete with cutting and making size for fixing switches (12 Nos each) of size 12''X10'' including removing old switches/sockets all as specified and directed.

Fixing only switch piano flush button type 05 Amp single pole, one way retrived from old Bakalite hylum sheet complete all as specified and directed.

Fixing only switch piano flush button type 15 Amps SP one way retrived from old Bakalite hylum sheet complete all as specified and directed.

Fixing only socket outlet multi purpose 3 pin 2 pin 05 Amp flush type retrived from old Bakalite hylum sheet complete all as specified and directed.

Fixing only only socket outlet multi purpose 6 pin and 3 pin, 15 Amp flush type retrived from old Bakalite hylum sheet complete all as specified and directed.

Excavating in trenches n.exc 1.5 mtrs wide and n.exc 1.5 mtr in depth for foundation of poles, taking out/laying of cables, poles etc and getting out in soft/loose soil complete all as specified and directed by Engr-in-charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft/loose soil complete all as specified and as directed.

Removing excavated materials n.exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point in soil, complete all as specified and as directed.

Supply and Laying well burnt bricks, sub class 'B' bricks, laid breath wise in trenches for protection of UG cable complete all as specified and directed.

M&L for sand cushioning for protection of cable (below, above and around the cable laid in trenches) complete all as specified and directed.

S&F GI tube light grade 40 mm bore laid in trenches/road/drain/wall alongwith all fittings complete with MS clamp and nut bolts and washers etc, including taking down old GI tubing alongwith all fixing accessories complete all as specified and directed.

Supply and laying cable in replacement LT underground Cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade cross-sectional area 35 Sq mm, 3.5 core including taking out old one laid in trenches/ on wall/ on pole/ in air/ through pipe/ duct etc complete all as specified and directed by Engr-in-Charge. Notes: (i) Wherever cable fixing/connection, suitable thimble should be used as per site situation. (ii) Excavation and earth work, sand cushioning, brick work and GI pipe shall be measured and paid separately.

Supply and laying cable in replacement of service connection 2 core cable with LT underground Cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade cross-sectional area 16 Sq mm, 2 core including taking out old one laid in trenches/ on wall/ on pole/ in air/ through pipe/ duct etc complete all as specified and directed by Engr-in-Charge. Notes: (i) Wherever cable fixing/connection, suitable thimble should be used as per site situation. (ii) Excavation and earth work, sand cushioning, brick work and GI pipe shall be measured and paid separately.

S&F in replacement distribution board double door (suitable for incomer MCCBs and out going MCB) TP & N vertical load line 6 Way complete with 200 Amps bus bar, 415 Volt sheet metal enclouser suitable for G frame MCCB complete all as specified and directed.

S&F in replacement Isolator 4 Pole, TPN 415 volts, 100 Amps rating with rupturring cap 16 KA, complete all as specified and directed.

S&F in replacement MCCB 4 pole, 415 Volt fixed thermal and fixed maganatic setting of cap 125 Amps 16KA complete all as specified and directed.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shallbe provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2using 40 mm graded stone aggregate complete all as specified and directed.

The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate and MS angle iron 50 x 50 x 6 mm frame including two coats of painting over a red oxide to sxposed steel surfaces. excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009) and testing on completion.

M/S Shesh Paul Gupta

M/S ARUN ANAND

Bidder Name

M/S Shesh Paul Gupta

M/S RAVINDER SINGH

M/S ARUN ANAND