Construction work of welcome gate near Sai temple located on Hamirpur Road in Pathanpura.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. 2.6.1 All kinds of soil [DSR 2023 C. N0- 2.6.1]

Boaring of 20 cm dia piles of single under reamed of 50 cm dia of bulb and 3.00 meter depth in black cottan soil with hand operated augur machine including all labour T& P etc.(new item 1 chapter -4)

P/L of C.C in 1:4:8 (1 cement :4 f.sand:8 stone ballast) including supply of all materials T&P etc labour required for the proper completion of the work.(As per S.I. No-281)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) [DSR 2023 C. N0- 5.2.2]

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.[DSR 2023 C. N0- 5.22.6]

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick [DSR 2023 C. N0- 5.9.21]

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) [DSR 2023 C. N0- 6.4.1]

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) [DSR 2023 C. N0- 13.4.1]

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - Exposed face machine cut and table rubbed with rough backing [DSR 2023 C. N0- 8.14.2.1]

Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade. Red sand stone [DSR 2023 C. N0- 7.32.1]

Supply and fixing of 25 mm dia ISI marked PVC conduit (as per DSR 2022 E&M item no-1225)

Supply and fixing of switch disconnector SFU and MCCB (as per DSR 2022 E&M item no-1610)

S/F G.I. box with modular plate and cover in front on surface or in recess including as item no- 1.57DSR E&M 2018

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. (DSR E&M 2022 code no-1.1.1)

Sign Board