Conversion of existing Overhead electrical distribution system to Underground Cable system in Mannagudda Sub-division of Mangaluru Division on Total turnkey basis

Conversion of existing Overhead electrical distribution system to UG system in Mannagudda Sub-division - Supply Portion

5 Way DAS RMU, One Incomer + Three Breakers + One out going (2OD + 3VL) 630 Amps with Copper Busbar

Bed Concreting with CC 1:2:4 [M-15] Using 20mm Nominal size graded crushed coarse aggregates

Providing Plinth with CC 1:2:4 on the Stone Masonary [M-15] Using 20mm Nominal size graded crushed coarse aggregates

Construction of stone Masonary(3.03*1.21*1.21mtr)(10*4*4)ft

Supplying of Frame of MS Channel 100x50 mm and MS angle 40x40x5 mm welding etc., complete.

Rod type earthing with 40 mm Dia, 3 Mtr long MS rod as per specification & drawing including digging of pit & fixing

Bitumen Compound

11kV 3 Core HT XLPE GI Round wire armoured UG Cable as per technical specifications - 240 Sq. mm (55 GI Wires - 3.15mm Dia)

11kV 3 Core HT XLPE GI Round wire armoured UG Cable as per technical specifications - 95 Sq. mm (54 GI Wires - 2.5mm Dia)

1.1kV LT UG XLPE GI strip armoured Insulated cables as per technical specifications - 240 Sqmm, 3.5 Core

1.1kV LT UG XLPE GI strip armoured Insulated cables as per technical specifications - 150 Sqmm, 3.5 Core

1.1kV LT UG XLPE GI strip armoured Insulated cables as per technical specifications - 95 Sqmm, 3.5 Core

Covering cable with Tiles, 125*250*40mm

GI Pipe, 100mm dia for drain crossing, cable raising etc.,

RCC Hume Pipes 2000mm long 150mm dia

Collars for RCC hume pipe

Route & Joint indicating stone

Cable Termination Kit Indoor Heat Shrinkable Type suitable for 11KV 3 Core 240 Sq.mm Cable

Cable Termination Kit Indoor Heat Shrinkable Type suitable for 11KV 3 Core 95 Sq.mm Cable

Cable Termination Kit Outdoor Heat Shrinkable Type suitable for 11KV 3 Core 240 Sq.mm Cable

Cable Termination Kit Outdoor Heat Shrinkable Type suitable for 11KV 3 Core 95 Sq.mm Cable

Straight Through Jointing Kits Heat Shrinkable Type suitable for 11KV 3 Core 240 Sq.mm Cable

Straight Through Jointing Kits Heat Shrinkable Type suitable for 11KV 3 Core 95 Sq.mm Cable

95Sqmm Straight through jointing kits suitable for LT UG Cable (HS Type)

240/150Sqmm Straight through jointing kits suitable for LT UG Cable (HS Type)

Earthing Set (GI Pipe B-Class with strips, bolt & nuts and washers, salt, charcoal etc)-Ordinary soil

Earthing Set (GI Pipe B-Class with strips, bolt & nuts and washers, salt, charcoal etc)-Hard soil

Earthing Set (GI Pipe B-Class with strips, bolt & nuts and washers, salt, charcoal etc)-HARD LATERITE SOIL

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 50 Sqmm, 3.5 Core (16 GI Strips - 4 x 0.8 mm)

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 25 Sqmm, 4 Core (13 GI Strips - 4 x 0.8 mm)

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 16 Sqmm, 4 Core (11 GI Strips - 4 x 0.8 mm)

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 10 Sqmm, 4 Core (10 GI Strips - 4 x 0.8 mm)

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 10 Sqmm, 2 Core (9 GI Strips - 4 x 0.8 mm)

Artificial/M-Sand for LT UG cable

Covering cable with Tiles, 125*250*40mm for LT UG cable

10Sqmm Straight through jointing kits suitable for LT UG Cable (HS type)

16Sqmm Straight through jointing kits suitable for LT UG Cable (HS type)

25Sqmm Straight through jointing kits suitable for LT UG Cable (HS type)

50Sqmm Straight through jointing kits suitable for LT UG Cable (HS type)

95Sqmm Straight through jointing kits suitable for LT UG Cable (HS Type)

120Sqmm Straight through jointing kits suitable for LT UG Cable (HS Type)

240/150Sqmm Straight through jointing kits suitable for LT UG Cable (HS Type)

3.5 Core 240sqmm Indoor/out door end termination kit suitable for LT UG Cable with all accessories

3.5 Core 95 sqmm indoor/Outdoor end termination kit suitable for LT UG Cable with all accessories

10Sq.mm 2 Core Termination kit suitable for LT UG Cable

Epoxy Terminating Kit (Pothead) suitable

for 1.1 kV, LTUG Cable-10sqmm

Epoxy Terminating Kit (Pothead) suitable

for 1.1 kV, LTUG Cable-16sqmm

Epoxy Terminating Kit (Pothead) suitable

for 1.1 kV, LTUG Cable-25sqmm

Epoxy Terminating Kit (Pothead) suitable

for 1.1 kV, LTUG Cable-50sqmm

GI Pipe Heavy duty pipe - 65mm dia

GI Pipe Heavy duty pipe - 40mm dia

Al End Terminals (Lugs) 95 Sqmm

Al End Terminals (Lugs) 120 Sqmm

Al End Terminals (Lugs)240 Sqmm

Pre - Stressed Tubular Spun Pole 11 Mtr Long - 500Kg WL-Normal soil

Pre - Stressed Tubular Spun Pole 11 Mtr Long - 500Kg WL- Hard soil

Pre - Stressed Tubular Spun Pole 11 Mtr Long - 500Kg WL-Hard laterite soil

B) Pole concreting with CC 1:2:4 (without coping) (1000x1000x2500mm)

C) Coping for pole with CC 1:2:4, 390mm all around the pole for an height of 300mm for Spun poles

Three H Frame with Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole up to and including 250 kVA (UG Cable)) - GI

Three H Frame without Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole for 63/100/250/500 kVA (UG Cable) - GI

HT Single Top Support with bolts, nuts & washers-GI

11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod)

Rabbit ACSR for jumps & Earthing

Alkathine tube 19mm dia, 2mm thick in coils of 30 mtrs

Guy Wire 7/10 SWG

PVC Pipe - 140 mm Dia

PVC Pipe - 25 mm Dia

11kV, 200Amps Single Break GOS

H - Frame Set for 11kV, 200Amps Single Break GOS Mounting - GI

11kV Class, HG Fuse Unit with Solid Core Insulators

10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR

LT Distribution Box for 100 kVA DTC with MCCB's (Sheet Metal)

LT Distribution Box for 250 kVA DTC with MCCB's (Sheet Metal)

Anticlimbing Device GI Barbed wire (12mtrs/Kg)

11 kV Horizontal Cross Arm with single top support, clamp, Bolt & Nuts with washers for RCC Poles - GI

Caution/Danger Board

PVC Insulated 1.1kv Class PVC Wire - 95 Sqmm

PVC Insulated 1.1kv Class PVC Wire - 120 Sqmm

PVC Insulated 1.1kv Class PVC Wire - 240 Sqmm

Heavy Duty Copper Terminals Long Barrel - 95 Sqmm

Heavy Duty Copper Terminals Long Barrel - 120 Sqmm

Heavy Duty Copper Terminals Long Barrel - 240 Sqmm

PG Clamps Rabbit to 95 Sqmm Insulated Wire

LT Spacer for TC Wiring

LT Brass Terminal Connector for 250 / 500 KVA

PVC Insulation Tapes19 mm wide and in rolls of 10 Mtrs

Brass Cable Glands 25mm

Brass Cable Glands 32mm

Brass Cable Glands 40mm

Brass Cable Glands 45mm

PVC Pipe - 25 mm Dia For LT service main

PVC Pipe - 32 mm Dia For LT service main

PVC Pipe - 40 mm Dia For LT service main

PVC Pipe - 50 mm Dia For LT service main

PVC Pipe - 63 mm Dia For LT service main

PVC Pipe - 75 mm Dia For LT service main

PVC Pipe - 90 mm Dia For LT service main

PVC Pipe - 110 mm Dia For LT UG cable

Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on...

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix

plant carriage of mixed Mate...

Bituminous Macadam Grading - I for traffic above 20 MSA A Providing and laying Bituminous Macadam with 120 tph capacity hot mix plant batch type using crushed aggregates of specified grading premixed...

Cement Concrete Pavement with OPC/PPC/PSC Construction of M40 grade un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with Cement at 420 kg/m3 coarse and fine ag...

12 Way HRC Fuse Based Thermoset Plastic LT Feeder Piller Box

8 Way HRC Fuse Based Thermoset Plastic LT Feeder Piller Box

Providing Plinth for feeder piller box with earth excavation,base concreting, plain concrete and plastering for LT Feeder Pillar box. Excavation 0.168cmt, plain cement conc.1:4:[email protected], CC 1:2:4,0....

Providing and laying 60mm thick factory made cement concrete paver

block of approved shape and colour of M -30 grade made of C&D waste

by block making machine with vibratory compaction laid in require...

KSRB 14.6-2 : Providing and laying Heavy duty cobbble stone 60mmthick interlock pavers, using cement and course sand for mannfacure of blocks of approved size, sharp and colour with a minimum Comperss...

Bolt & Nuts (GI)

1.1kV Ceramic Pin Insulator (Shell Only)

1.1kV GI Pin for 1.1kV Ceramic Shell Insulator

2 Pin Cross arm with Pole Clamp, bolt & Nuts & Washers for RCC Pole-GI

4 Pin Cross arm with Pole Clamp, bolt & Nuts & Washers for RCC Pole-GI

11 kV, 45 kN Polymeric Insulator

No. 8 Strain Insulator

Single H Frame Without Transformer Seating and Seating angle support X arm for 11 Mtr Spun Pole for 63/100/250/500KVA (GI) (OH Line)

Al End Terminals (Lugs) 10 Sqmm

Al End Terminals (Lugs) 16 Sqmm

Al End Terminals (Lugs) 25 Sqmm

Al End Terminals (Lugs) 50 Sqmm

HDPE grade PE80-PN6.0, 160mmdia HDPE Piepe (colour Red with MESCOM EMBLEM)

HDPE grade PE80-PN6.0, 125mmdia HDPE Piepe (colour Red with MESCOM EMBLEM)

HDPE grade PE80-PN6.0, 110mmdia HDPE Piepe (colour Red with MESCOM EMBLEM)

Spun Pole Clamp (GI)

Lettering of Spun Pole & FPB with enamel paint & also writing single line diagram of each panel, caution board etc including cost of paint brush etc

1.1 kV, LT Aerial Bunched Cable, XLPE

insulation confirming to IS-14255: 3x95 + 1x70 + 1x16 Sqmm Street light (Insulated

Messenger cum Neutral

Conversion of existing Overhead electrical distribution system to UG system in Mannagudda Sub-division - Erection Portion

Lettering of RMU Panel with enamel paint & also writing single line diagram of each panel, caution board etc including cost of paint brush etc

Earth Excavation for RMU Foundation depositing of earth on bank up to a lead of 50 Mtr and with a lift up to 1.5 Mtr a. Ordinary soil

Earth Excavation for RMU Foundation depositing of earth on bank up to a lead of 50 Mtr and with a lift up to 1.5 Mtr b.Hard soil

Earth Excavation for RMU Foundation depositing of earth on bank up to a lead of 50 Mtr and with a lift up to 1.5 Mtr c.Lattirite

Labour charges for fixing foundation frame MS channel 100x50mm & MS angle 40x40x5mm welding, fixing in concrete, aligning the RMU on foundation bed, assembly of units connecting bus bars from panel to...

Transporting RMU (conventional ) unit from store to work spot including loading, unloading. (No separate crane charges)(5 panel)

KSRB 15-3.11 Plastering concrete surface in cement mortar 1:4, 20 mm thick inclusive of smooth rendering curing etc., complete. (3.4 Sq.mt per RMU)

Cutting of Road surface for Tar Road

Cutting of Road surface for Cement Concrete Road

Cable trench excavation, for HT Ug cable a. Ordinary soil

Cable trench excavation, for HT Ug cable b.soft Rock

Cable trench excavation, for HT Ug cable c. Hard Rock

Laying of HT UG Cables by Horizontal 6'' bore size 3*240Sqmm Without HDPE Pipe(Normal soil)

Laying of HT UG Cables by Horizontal 6'' bore size 3*240Sqmm Without HDPE Pipe(Rock soil)

Laying of HT UG Cables by Horizontal 6'' bore size Without HDPE Pipe 3*95(Normal soil)

Laying of HT UG Cables by Horizontal 6'' bore size Without HDPE Pipe 3*95(rock soil)

Laying of HT UG Cables in trench without HDPE Pipe 3*240sqmm & in trench constructed in conventional method

Laying of HT UG Cables in trench without HDPE Pipe 3*95sqmm & in trench constructed in conventional method

Laying of LT UG Cables by Horizontal 6'' bore size 3.5 *240Sqmm or 3.5*150sqmm or 3.5*95 Without HDPE Pipe(Normal soil)

Laying of LT UG Cables by Horizontal 6'' bore size 3.5*240Sqmm or 3.5*95sqmm Without HDPE Pipe(Rock soil)

Laying of UG Cables in trench without HDPE Pipe 3.5*240sqmm LT UG cable & in trench constructed in conventional method

Laying of UG Cables in trench without HDPE Pipe 3.5*150sqmm LT UG cable & in trench constructed in conventional method

Laying of UG Cables in trench without HDPE Pipe 3.5*95sqmm LT UG cable & in trench constructed in conventional method

Refilling & Consolidation

Spreading and forming with sand all round the cable to a depth of 75 mm and width of 500 mm. (Does not include cost of sand).

Covering cable with Tiles

GI Pipe, 100mm dia for drain crossing, cable raising etc.,

Laying of RCC Hume Pipes

Route & Joint indicating stone

Cable Termination Kit Indoor Heat Shrinkable Type suitable for 11KV 3 Core 240 Sq.mm Cable

Cable Termination Kit Indoor Heat Shrinkable Type suitable for 11KV 3 Core 95 Sq.mm Cable

Cable Termination Kit Outdoor Heat Shrinkable Type suitable for 11KV 3 Core 240 Sq.mm Cable

Cable Termination Kit Outdoor Heat Shrinkable Type suitable for 11KV 3 Core 95 Sq.mm Cable

Straight Through Jointing Kits Heat Shrinkable Type suitable for 11KV 3 Core 240 Sq.mm Cable

Straight Through Jointing Kits Heat Shrinkable Type suitable for 11KV 3 Core 95 Sq.mm Cable

95Sqmm Straight through jointing kits suitable for LT UG Cable (HS Type)

240/150Sqmm Straight through jointing kits suitable for LT UG Cable (HS Type)

Earthing Set (GI Pipe B-Class with strips, bolt & nuts and washers, salt, charcoal etc)-Ordinary soil

Earthing Set (GI Pipe B-Class with strips, bolt & nuts and washers, salt, charcoal etc)-Hard soil

Earthing Set (GI Pipe B-Class with strips, bolt & nuts and washers, salt, charcoal etc)-HARD LATERITE SOIL

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 50 Sqmm, 3.5 Core (16 GI Strips - 4 x 0.8 mm)

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 25 Sqmm, 4 Core (13 GI Strips - 4 x 0.8 mm)

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 16 Sqmm, 4 Core (11 GI Strips - 4 x 0.8 mm)

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 10 Sqmm, 4 Core (10 GI Strips - 4 x 0.8 mm)

1.1kV LT UG Heat Resistant PVC Insulated GI strip armoured Cables as per technical specifications - 10 Sqmm, 2 Core (9 GI Strips - 4 x 0.8 mm)

Cable trench excavation, for LT UG cable a. Ordinary soil

Cable trench excavation, for LT UG cable b.soft Rock

Cable trench excavation, for LT UG cable c. Hard Rock

Refilling & Consolidation for LT UG cable

Spreading and forming with sand all round the cable to a depth of 75 mm and width of 500 mm. (Does not include cost of sand).for LT UG cable

Covering cable with Tiles for LT UG cable

Lifting of Excess Earth up to distance of 10 km

10Sqmm Straight through jointing kits suitable for LT UG Cable (HS type)

16Sqmm Straight through jointing kits suitable for LT UG Cable (HS type)

25Sqmm Straight through jointing kits suitable for LT UG Cable (HS type)

50Sqmm Straight through jointing kits suitable for LT UG Cable (HS type)

95Sqmm Straight through jointing kits suitable for LT UG Cable (HS Type)

120Sqmm Straight through jointing kits suitable for LT UG Cable (HS Type)

240/150Sqmm Straight through jointing kits suitable for LT UG Cable (HS Type)

3.5 Core 240sqmm Indoor/out door end termination kit suitable for LT UG Cable with all accessories

3.5 Core 95 sqmm indoor/Outdoor end termination kit suitable for LT UG Cable with all accessories

10Sq.mm 2 Core Termination kit suitable for LT UG Cable

Epoxy Terminating Kit (Pothead) suitable

for 1.1 kV, LTUG Cable-10sqmm

Epoxy Terminating Kit (Pothead) suitable

for 1.1 kV, LTUG Cable-16sqmm

Epoxy Terminating Kit (Pothead) suitable

for 1.1 kV, LTUG Cable-25sqmm

Epoxy Terminating Kit (Pothead) suitable

for 1.1 kV, LTUG Cable-50sqmm

GI Pipe Heavy duty pipe - 65mm dia

GI Pipe Heavy duty pipe - 40mm dia

Pre - Stressed Tubular Spun Pole 11 Mtr Long - 500Kg WL-Normal soil

Pre - Stressed Tubular Spun Pole 11 Mtr Long - 500Kg WL- Hard soil

Pre - Stressed Tubular Spun Pole 11 Mtr Long - 500Kg WL-Hard laterite soil

Three H Frame with Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole up to and including 250 kVA (UG Cable)) - GI

Three H Frame without Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole for 63/100/250/500 kVA (UG Cable) - GI

HT Single Top Support with bolts, nuts & washers-GI

Rabbit ACSR for jumps & Earthing

11kV, 200Amps Single Break GOS

H - Frame Set for 11kV, 200Amps Single Break GOS Mounting - GI

11kV Class, HG Fuse Unit with Solid Core Insulators

10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR

LT Distribution Box for 100 kVA DTC with MCCB's (Sheet Metal)

LT Distribution Box for 250 kVA DTC with MCCB's (Sheet Metal)

Anticlimbing Device GI Barbed wire (12mtrs/Kg)

11 kV Horizontal Cross Arm with single top support, clamp, Bolt & Nuts with washers for RCC Poles - GI

Caution/Danger Board

Releasing & reerection of 500KVA Transformer

Releasing & reerection of 250KVA Transformer

Releasing & reerection of 100KVA Transformer

Releasing & reerection of 63KVA Transformer

Releasing & reerection of 25KVA Transformer

Releasing & reerection of DTC Metering box

Releasing & reerection of LT Wiring Kit-Single Circuit for 25/63/100 kVA DTC (includes fixing of necessary supports like 2 Pin cross arm, Spacer etc)

Releasing & reerection of LT Wiring Kit-Double Circuits for 25/63/100 kVA DTC (includes fixing of necessary supports like 2 Pin cross arm, Spacer etc)

Releasing & reerection of LT Wiring Kit-Single Circuit for 250/500 kVA DTC (includes fixing of necessary supports like 2 Pin cross arm, Spacer etc)

a) Wiring of One circuit of LT Wiring for for 25/63/100 KVA DTC to the existing LT protection Kit/Distribution Box via metering box. (includes fixing of necessary supports like 2 Pin X-arms, Spacers e...

b) Wiring of Two circuits of LT Wiring for for 25/63/100 KVA DTC to the existing LT protection Kit/Distribution Box via metering box.(includes fixing of necessary supports like 2 Pin X-arms, Spacers e...

Construction of platform with concreet piller with plastering for erection of 63/100/250/500 kVA Transformer/Metering cubicle/Heavy Equipment

Releasing & Refixing of over head service mains (single phase/3 phase) (While replacing existing pole)

12 Way HRC Fuse Based Thermoset Plastic LT Feeder Piller Box

8 Way HRC Fuse Based Thermoset Plastic LT Feeder Piller Box

Providing Plinth for feeder piller box with earth excavation,base concreting, plain concrete and plastering for LT Feeder Pillar box. Excavation 0.168cmt, plain cement conc.1:4:[email protected], CC 1:2:4,0....

2 Pin Cross arm with Pole Clamp, bolt & Nuts & Washers for RCC Pole-GI

4 Pin Cross arm with Pole Clamp, bolt & Nuts & Washers for RCC Pole-GI

Single H Frame Without Transformer Seating and Seating angle support X arm for 11 Mtr Spun Pole for 63/100/250/500KVA (GI) (OH Line)

Spun Pole Clamp (GI)

Lettering of Spun Pole & FPB with enamel paint & also writing single line diagram of each panel, caution board etc including cost of paint brush etc

1.1 kV, LT Aerial Bunched Cable, XLPE

insulation confirming to IS-14255: 3x95 + 1x70 + 1x16 Sqmm Street light (Insulated

Messenger cum Neutral

Releasing of 11mtr Spun pole

Releasing of 11mtr Spun pole

Releasing of RCC pole 9.5mtr long

Releasing of RCC pole 9mtr long

Releasing of RCC pole 9mtr long

Releasing of PSC pole 9mtr long

Releasing of PSC pole 9mtr long

Releasing of Rail pole -9mtr long

Releasing of I-Beam pole 11mtr long

Releasing of RCC pole -8mtr long

Releasing of PSC pole -8mtr long

Releasing of PCC pole -8mtr long

Releasing of 11kv horizontal cross arm

Releasing of 11kv special 3pin cross arm

Releasing of 4 pin cross arm

Releasing of 2-pin cross arm

Releasing of coyot ACSR conductor

Releasing of Rabbit ACSR conductor

Releasing of Weasel ACSR conductor

Releasing of Squirrel ACSR conductor

Releasing of DP set including poles

Releasing of Double pole transformer structure 25/63/100KVA

Releasing of Double pole transformer structure 250KVA

Releasing of GOS 200A S/B

Releasing of GOS 400A S/B

Releasing of SPMT set 250/500KVA

Releasing of SPMT set 25/63/100KVA

Releasing of LT protection kit

Releasing of LT Distribution Box