Construction of 16 No. New Court room in Gurugram

Amount

Providing transporting cutting laying and connectinf polycarbonate multi wall panel system minimum 16mm thick with polished texture and UV protection on both side confirming to IS 14443 complete with all modular accessories as per drawings and specification. The material color specification and the supplier will have to be got approved by the Engineer before placing order the supporting frame will be paid seprately. The laying and connection of sheets will have to be executed under strict supervision of the experts of the manufacture/suppliers

Providing and fixing 100mm thick partition made with HDHMR board 16.75mm bothside on the wooden frame both side laminated with 1mm thick decorative laminated sheet and 100mm wide wooden patti polished finished on top and sides complete in all respect as per approved Laminate sheet make, model, colour, design, drawing and directions of Engineer-in-Charge.(N.S)

Providing and fixing sliding window made of 1.2 mm GPSP sheet Powder coating with 6 m tuffen glass and Alumuniam grill.

Providing and fixing Solid Steel Doors made up of 0.8 mm thick GI sheet, Door leaf 44mm thick, and groove type door frame of 1.2 mm thick GI sheet, with Honeycomb as infill material with Polyester Powder Coated finish with Hardware as mentioned below, with vision glass and with installation as per Synergy Standards. Single Rebate, Max Jamb Size = 100 mm

Providing and fixing Solid Steel Doors made up of 0.8 mm thick GI sheet, Door leaf 44mm thick, and groove type door frame of 1.2 mm thick GI sheet, with Honeycomb as infill material with Polyester Powder Coated finish with Hardware as mentioned below, with vision glass and with installation as per Synergy Standards. Single Rebate, Max Jamb Size = 100 mm (Steel door and Door Frame 750x21000mm)

Providing and fixing Synergy Make 50/90 mm thick PUF insulated wall panel made on automatic continuous line with 0.5 mm PPGI sheet on both side of Polyurethane foam confirming to IS 12436:1988 having density of 40 ± 2 kg /m3. The pre coated sheet shall be minimum 240 mpa steel grade confirming to IS 14246:1995 and have zinc coating of minimum 120 gsm as per IS 277:1992. The panels will be vertically joined together by tongue and groove joints.(N.S)

Providing and fixing Synergy Make 60mm thick PUF insulated wall panel made on automatic continuous line with 0.5 mm PPGI sheet on both side of Polyurethane foam confirming to IS 12436:1988 having density of 40 ± 2 kg /m3. The pre coated sheet shall be minimum 240 mpa steel grade confirming to IS 14246:1995 and have zinc coating of minimum 120 gsm as per IS 277:1992. The panels will be vertically joined together by tongue and groove joints.(N.S)

Providing and fixing Ventilator made of 1.2 mm GPSP sheet Powder coating.

providing and fixing Wall Panelling with 16.75 mm HDHMR board fixed on gridsize 300 mm x 300 mm with 50mm wide HDHMR board frame, HDHMR board shall be duly side laminatedwith 1 mm thick decorative high pressure laminate sheet with top corner of panelling finished with 50mmx50mm teak wood moulding with polished including cost of nails,screws, adhesives etc complete in all respect. Laminate sheet make, model, colour to be approved by Engineer-in-Charge (N.S)

Providing and fixing witness box of size 1100mmx 880mm with height 1100mm made with pine wod frame with dual side 16.75 mm HDHMR board dual laminated with 1 mm apporved Greenlam laminated sheet with teak wood polished patti on Top and Bottom side in polished finished including adhesive, screws etc complete in all respect all as per approved Laminate sheet make, model, colour, design, drawing and directions of Engineer-in-Charge.

Providing and placing Judge Table size 2400mm x 900 mm with height 860mm made of 16.75 mm thick HDHMR board, with table top and vertical side panels 35 mm thick (double board provision), laminated with 1.0 mm decorative laminate on exposed surfaces, balancing laminate on inner surfaces, and 2.0 mm edge banding tape on all exposed edges, complete with two side storage cabinets (each having one lockable drawer on telescopic channels and one lockable shutter cabinet with stainless steel handle and lock), centre open leg space, and front vertical (modesty) panel, including all hardware/fixtures of approved make, all complete as per approved Laminate sheet make, model, colour, design and drawing and instruction of Engineer-in-Charge.

providing and placing office table/work station tableof size 1200mm x 600 mm with height 760 mmm made of 16.75 mmthick HDHMR board with table top and vertical side panles 35 mm thick ( Double board) , laminated with 1 mm decorative lamiante sheet on exposed surface, balancing laminate on inner surfcae and 2 mmthick edge binding tape on exposed edges complete with pullout keyboard tray, one lockable drawer with telescopic channels, one lockable storage cabinet with shutter, vertical modesty panel. all hardware, fiitings of all as per approved Laminate sheet make, model, colour, design and directions of Engineer-in-Charge.

Providing and placing storage/book cabinet unit 600 mm depth in court room made of 16.75 mm thick HDHMR board and back with 9 mm thick HDHMR board duly laminated with 1.0 mm decorative laminate on exposed surfaces, balancing laminate on inner surfaces, and all exposed edges finished with 2.0 mm edge binding tape, comprising of bottom storage section with laminated solid shutters fitted with Brass handles and locks, middle and upper storage section with laminated HDHMR Board shutters or 5 mm thick glass panels fixed in HDHMR frame, provided with adjustable shelves inside, complete with all necessary fittings, fixtures and hardware, all as per approved Laminate sheet make, model, colour, design and directions of Engineer-in-Charge. (N.S)

Bidder Name

Amount

prashant construction company (GSTN-06BNFPR8035K1ZL) BID ID -1384814

Advitiya Constructions Private Limited (GSTN-NA) BID ID -1385158

Advitiya Constructions Private Limited (BID ID -1385158)

Advitiya Constructions Private Limited (BID ID -1385158)