SPECIAL REPAIRS TO BLDG NO T 34 T 35 AND T 43 IN SAJJAN LINES AT UDAIPUR MIL STN

Amount

Taking down wooden chowkats or frames area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1, complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).

Taking down wooden chowkats or frames area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1, complete all as specified and as directed. (Note – The qouted rate shall be deemed to include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid).

Supply and fixing for mild steel framed work as in door chowkats /gate of angle or other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides),

Supply and fixed 35mm thickPlain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneeringon both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, commercial type on both sides complete all as specified.

Supply and fixing IInd class (hollock) factory made 35mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

Supply & fixed 100 mm butt hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.

Supply and fixing 200 mm mild steel barrel tower bolts, ISI marked, stove enameled black with bright bolt and fixed, complete all as specified.

Supply and fixing mild steel pressed handles, oval type, enameled black 150mm long, complete all as specified.

Supply and fixing 300 mm mild steel sliding door bolts, ISI marked, stove enameled black, with bright bolt not less than 16mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple, complete all as specified

Supply & fixed MS helical door spring150 mm long fixed with screws to wooden chowkhats or fixed with welding to steel chowkhats.

Supply & fixing steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailes or welded all as specified and directed.

Supply & fixing steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailes or welded complete all as specified and directed.

Supply and fixing framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders framed balusters; walk ways; railings; and similar work conforming to Fe-290-Gde E-165 complete all as specified.

Supply and fixing galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified.

Supply & fixing in repairs stainless steel type certain rod 22 to 25mm dia as per sample

Supply & fixing of purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample as in repair.

Supply & fixing of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample as in repaie complete all as specified.

Taking down cement plaster from brick walls ,concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified.

Material and Labour for 15mm thick rendering on fair faces of brick work, concrete surfaces in cement mortar 1:4 mixed with WPC @3% by weight of cement or as per manufacturer’s instructions, finished even and fair, complete all as specified. (Note : WPC shall be measured and paid separately)

Material & Labour for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 1mm thick wall care putty on plastered for neat and smooth finishing including preparation complete. alll as specified.

Material and labour for preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer/white wash complete all as specified.

Complete removal of existing treatment of wall and applying two coat of oil emulsion distemper over 1mm thick wall care putty on plastered surface for neat and smooth finishing complete all as specified and directed..

Complete removal of existing treatment and applying two coat of cement base paint on wall complete all as specified and directed.

Supply & fixed for sheet glass 4mm thick, ordinary quality and glazing with oil putty, in square n.exc 0.5 Sqm each and glazing with oil putty to steel window complete all as specified.

Material & Labour for two coat of synthetic enamel painting to wood surface of any description, not otherwise described over 10cm width or girth including preparation of new surfaces over a coat of pink primer cpmplete all as specified and directed.

Description all as per ser item No 77 herein before but on steel surface over a coat of red oxide primer complete all as specified.

Supply only integral water proofing compound, complete all as specified.

Dismantling asbestos cement corrugated or semi-corrugated sheets including AC ridges etc, as in roof covering, complete all as specified.

Supply and fixing pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having 550 Mpa tensile strength as in roof covering/cladding and fixed with self tapping screws, complete all as specified.

Supply and fixing pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour , having 550 Mpa tensile strength as in roof covering/ridges and fixed with self tapping screws, complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified.

Supply and Fix aluminum snap grid frame work of size 605x605 mm for false ceiling comprising 40x25x2mm aluminum angle weight 0.36kg/Rm, fixed all along the wall at ends and with aluminium main and cross section of size 36.5mmx25mmx 1.4mm weighing not less than 0.24 kg / Rm respectively including aluminium cleats, bolts, nuts and washers as per manufacturer’s instructions, complete all as specified.

Supply and Fixing of gypsum board 12mm thick with screw in cieling as per manufacturer instruction and as directed by Engr-In-Charge complete.

Material and labour for 3.15 mm dia plain galvanized steel wire suspenders for false/grid ceiling including drilling holes and making good and match to the existing surface., complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Material and labour 300x300x7mm thick colour galzed ceramic tiles (non skid) as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Material and labour for glazed and coloured ceramic joint free tiles (450x350) x 7 mm thick, as in vertical surfaces such on skirting, dados and riser to steps. etc set and joined in neat cement slurry and pointed in white or coloured cement to match including 10mm thick cement plaster in cement mortar 1:4 as backing coat on fair faces on stone surface all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level and removing material from site complete all as specified and directed.

Supply & fixed Polymer coloured (Polypropeylene Delrin and ABS) low level flushing cistern 10 Ltr capacity, valveless syphonic action type complete with inlet ball valve float valve bends brackets, rawl plug, brass screws handle etc complete having BIS derscription mark with 2731 with and including suitable size of MS brackets, plug, screws all as required incl taking down existing high level/low level flushing cistern any type disconnecting pipes and jointing with new one etc and making good the floors/walls as per existing floor finish/wall finish including 32 mm bore PVC flush pipe and jointing with Water closet of any type complete all as specified and directed.

Supply and fixing , vitreous China squatting pan of Orrisa pattern size 580mmx440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and integral foot rests of any pattern complete including provision of lime concrete bedding, trap and connection to flush pipe complete all as specified.

Supply & fixed in repair vitreous china wash hand basin flat back white of size 550mmx400mm with 32 mm dia chromium plated waste coupling including flush pipe etc complete all as specified.

Supply and fixing in repairs,15mm bore pillar tap, fancy type, chromium plated cast copper alloy with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks , compete all as specified. (Note : Weight of pillar tap shall not be less than 0.665 Kg)

Supply and fixing in repair, bib tap screwed down high pressure, cast copper alloy,fancy type, chromium plated, ISI marked, with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified. (Note : Weight of bib tap shall not be less than 0.575 Kg)

Taking up or down 15mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed.

Taking up or down 20 mm dia steel tubing and connections by disconnecting fittings/tubing from existing tubing were required including cleaning for refixing or removal from site complete all as specified and directed.

Supply & fixed GI tubing medium grade 15mm dia incl fittings, cutting threading and fixing to walls or fixing in concealed walls or in floors etc, and making good the surfaces matching to exsiting surafaces of walls/ floor to the entire satisfaction of Engineer-in-charge.

Description all as per Srl item No.13 here in before but 20mm complete all as specified

Supply and fixed (in repair) stop valves, 15 mm dia pipe, chromium plated, ISI marked, screwed down, high pressure with crutch or butterfly handle (concealed type) with long shank, screwed both ends for iron pipes or for unions, complete all as specified.(Note : Weight of bib tap shall not be less than 0.575 Kg)

Supply and fixing (in repair) angle cock 15mm dia chromium plated, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or unions, complete all as specified. (Note : Weight of angle cock shall not be less than 0.575Kg).

Supply & fixed in repair PVC connections 45cm long including 15mm bore PTMT nuts on both ends complete all as specified.

Supply & fixed in repairs stainless steel grating openable 100mm dia without hole including fixing with white cement complete all as specified.

Supply & fixed in repair fancy type shower rose125mm dia size of Rim and 30cm long CP brass pipe with swiwel joint complete all as specified.

Supply & fixed in repair CP brass soap tray fixed with brass screw complete all as specified.

Supply & fixed Powder coated aluminium ventilator fixed type without sash bar, aluminium section weighing 0.55 kh/m including necessary jointing cleats, glazing clip,rubber packing, anodised aluminium snap beading, screw etc complete all as specified.

Supply & fixed steel for 5mm thick figured glass, ordinary quality and glazing rubber beading in square nexc 0.5 sqm in each pane complete

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple or fixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified.

Supply & fixed for poder coated aluminium grill of 7.00mmx3mm thick section square, rectangular, triangular, circular shape aperture not exc 7 cm in length or width fixed with H or F channel all as specified and directed.

Dismantling of 100mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out complete all as specified and directed.

Dismantling of 75mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out complete all as specified and directed.

Supply & Fixed for 100mm bore cast iron pipe in any length including jointing with cement complete all as specified.

Supply & Fixed for 75mm bore cast iron pipe in any length including jointing with cement complete all as specified.

Supply & Fixed CI bends any radius 10 mm bore.

Supply & Fixed CI bends any radius 75 mm bore.

Supply & Fixed cast iron cowls 75 mm bore.

Supply & Fixed 100 mm bore cast iron sanitary connection socket to fit WC outlet complete.

Dismantling water tanks 500 to 1000 Ltrs capacity (Steel/AC/RCC tanks) & removing from site all as specified.

Supply & Fixing , Routational moulded , polythene water Tank 1000 ltr capacity (cylindrical vertical with closed top), hoisted and fixed in position complete all as specified and directed.

Supply & Fixed in repairs 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

Supply & Fixed in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed

Supply & Fixed in repairs, Brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cms long between flanges complete all as specified

Material and labour for carrying out water proofing treatment for roofs in the following stages and as directed by Engr-in-Charge”.

(i) Material and labour for 10mm thick plaster in CM 1:4 with WPC will be applied over the roof slab . After the plaster is cured the roof will be tested for water tightness by ponding with water for seven days for any seepage/leakages etc. If any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5 Kg/Sqcm using cement based cement grout. After the surface is repaired the slab will be tested for water tightness again before proceeding with further treatment.

(ii) The surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter wuch as fungus, moss, dust etc by wire brushing and dusting. For cast iron drain out lets a grove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls), around obstacles such as pipes, chimneystacks, etc and other similar situation to ease up about comers.

(iii) Bituminous based primer conforming to IS : 3384-1965 @ 0.3 Kg/SM to be applied on prepared surface, till the surface is properly impregnated.

(iv) After the application of approved bituminous primer the water proofing membrane of 3mm thickness @ 3 Kg/Sqm shall be laid on the primed surface by torch application method as per manufacturer’s instruction. The overlap while torching shall be 100 mm in longitudinal direction and 100 mm in transverse direction. All overlap joints shall be sealed thoroughly by thermofusing both the membrane layer and sealing it with the help of hot trowel. The overlap joints shall be made as a monolithic layer.

(v) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml per bag of cement and cured well before laying the membrane.

(vi) A fillet of PCC 1:2:4 of 100 x 100 mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners/junctions should be rounded. Applying two coats of silver shield paint over APP membrane complete.

Material & Labour for one coat of synthetic enamel painting to wood surface of any description, not otherwise described over 10cm width or girth including preparation of old painted surface cpmplete all as specified and directed.

Description all as per ser item No 50 herein before but on old painted steel surface complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs any thickness, including cover fillets complete all as specified.

Material and labour for machine cut kota stone slab 18-22 mm thick (of size not less than 55 cm x 55 cm) laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) over and including cement screed bed 20 mm thick in cement mortar (1:4) base including rubbing and mirror polishing, complete all as specified.

Material and labour for machine cut kota stone slab 16-18 mm thick laid and jointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) but as in skirting over and including 10mm thick plaster in cement mortar (1:4) on brick work or concrete surfaces, complete all as specified.

Taking up broken sewage pipe line in average depth 1.00mtr, replacing the same with new SWG pipes including jointing with cement joints, benching and hunching with PCC 1:4:8 type D-2 using 40mm graded stone aggregate for 150mm bore SWG pipe line including excavation and earth work and returning, filling in trenches and removal of soil upto 50m complete all as directed.

Demolition of stone masonry, built in cement mortar as in drain, manhole, septic tank and soak well complete all as specified and directed.

Material & Labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

Supply and fixing factory made PVC hollow door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixing to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number and minimum 02 Nos. for horizontal member), complete all as specified.

Supply and fixing factory made 30 mm PVC rigid foam panel door shutter made from mild steel tubular frame of size 19 mm x 19 mm for stiles and 15 mm x 15 mm for top and bottom rails and covered with 5 mm thick head moulded PVC channel having width of 50 mm to form stiles and PVC street of width 75 mm to form rock rail, bottom rail and top rail or either side having panels inserted with 5 mm thick PVC sheet sealed with solvent cement adhesive to the stiles and rails with 5 mm x 25 mm PVC sheet beading on either side including three Nos. aluminium hinges for each door complete all as per manufacturer instructions complete all as specified.

Taking down old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. all as directed by engineer in charge.

Material & Labour for point wiring with 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated, FRLS and unsheathed type alongwith 1.5 Sqmm PVC insulated stranded copper conductor cable for continous earthing in & including PVC rigid conduit concealed with accessories having ISI mark fixed on wall surfaces / ceiling including provision of PVC box of appropriate size for fixing switches sockets etc. all as specified (Make of cable: Kalinga/Havells/Anchor) for One light point / Fan/ bell point controlled by one switch.

(a) One light point controlled by one 5 Amps switch

(b) One Fan point controlled by one 5 Amps switch

(d) One socket 3 Pin 5A pin socket oulet 5Amps on same board with cables 1.5 Sqmm size

(c ) One socket 3 Pin 5A pin socket oulet 5Amps on indepndent board with cables 1.5 Sqmm size.

Supply & Fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd

Supply & Fixing lamp holder Angle / batton type insulated body with back plate and to be fixed on PVC bock. Including dismantling old one. Make : Anchor / Leader/ Kinjal

Supply & Fixing socket outlet 5 pin 5/6 Amps flush type multipurpose suitable for 3 pin/2 pin plug complete including dismantling old one. Make : Anchor / Leader/ Kinjal

Supply & Fixing ceiling rose surface tpe 3 terminals to be fixed on PVC block including dismantling old one. Make : Anchor / Leader / Kinjal

Fixing only LED integrated batten tube light fittings 20/22 Watt 4 Feet long complete up with twin core twisted flexible copper conductor cable of size 23/0.0076 complete all as specfied and directed. Note : LED tube lights will issued under Sch 'B' , free for fixing.

Material & Labour MCB SPN DB sheet metal enclosure double door suitable for mounting MCB 240 Volts with busbar 4 way including dismantling old one. Make : Havells / Legrand / Schneider/Standard

Supply & Fixing MCB SPN 230 Volts 40 Amps. Make : Havells/Legrand/Standard/ C&S

Supply & Fixing MCB SP 230 Volts 6- 32 Amps. Make : Havells/Legrand/Standard/ C&S

Hanging only ceiling fan (M.D.supply) and connecting up including provision of cable from ceiling rose or connector to fan

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2core

L AND J CONSTRUCTION CO.

Punjab Traders

M/s SUNIL ENTERPRISES