GE(W)/HSR-06/2023-24 REPAIR TO SUNKEN FLOOR, TOILET FITTING, INTERNAL WATER SUPPLY OF ZONE B AT HISAR MIL STN UNDER GE (W) HISAR

Amount

Demolition of cement concrete(unreinforced)/ lime concrete as in sunken portion / ground floor exceeding 15cm thickness including removing rubbish complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity exc 250 ltr but n.exc 500 ltr complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1(using 20 mm graded crushed Stone agg) as in sunken portion /padding leveling course providing necessary slope including WPC complete all as specified and directed. Note :- WPC Shall be measured seperately.

S&F in Repair PVC Floor trap 75mm bore with grating incl jointing using solvent cement to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed and making good damage portion with same material of existing floor etc complete all as specified and directed.

Dismantling cast iron work of any description complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) of any description Including fittings complete all as specified & directed.

S&F, 110mm dia PVC rain water pipe of pressure single socketed with rubber joint, jointed with solvent joint fixed to wall complete all as specified & directed

S&F, 110mm dia PVC bend any radius complete all as specified & directed.

S&F PVC (SWR) pipes 110 MM bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.

S&F PVC (SWR) pipes75 MM bore single socketed in any length with rubber ring joints fixed to walls complete all as specified & directed.

S&F PVC (SWR) pipes 110 MM bore single socketed in any length with rubber ring joints laid in floor/trenches Completed all as directed. Including necessary demolition of pcc/rcc and excavation of soft/loose soil in trenches including refilling the soil after laid pipe in trenches and making good complete all as specified & directed.

S&F PVC (SWR) pipes75 MM bore single socketed in any length with rubber ring joints laid in floor/trenches complete all as specified & directed.

S&F PVC (SWR) bends 110 mm bore with/without access door any radius complete all as specified & directed.

S&F PVC (SWR) bends 75mm bore with/without access door any radius complete all as specified & directed.

S&F PVC (SWR) single junction 'T' 75 mm bore with access door any radius complete all as specified & directed.

S&F PVC (SWR) single junction 'T' 110 mm bore with access door any radius complete all as specified & directed.

Taking up or down 15mm bore dia, steel tubing & connections incl cleaning for refixing or removal to store complete all as specified & directed.

Taking up or down for 20mm bore steel water tubing galvanised with connection complete all as specified & directed.

Supplying and laying of CPVC pipes SDR 11 & Plain 20mm outer dia CPVC SDR 11 fittings in wall/ceiling complete all as specified & directed.

Supplying and laying of CPVC pipes SDR 11 & Plain 25 mm outer dia CPVC SDR 11 fittings in wall/ceiling complete all as specified & directed.

Supplying and laying of 16 mm dia CPVC pipes SDR 11 & fittings on walls/ceilings or laying in floors complete all as specified and directed

S&F Brass Elbow for special fitting of 16 mm outer bore CPVC pipe complete all as specified and directed.

S&F Brass Elbow for special fitting of 20 mm outer bore CPVC pipe complete all as specified and directed.

S&F Brass Elbow for special fitting of 25 mm outer bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 16 mm outer bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 20 mm outer bore CPVC pipe complete all as specified and directed.

S&F Brass Tee for special fitting of 25 mm outer bore CPVC pipe complete all as specified and directed.

S&F Male Brass threaded Adaptor Tee for special fitting of 16 mm outer bore CPVC pipe complete all as specified and directed.

S&F Male Brass threaded Adaptor Tee for special fitting of 20mm outer bore CPVC pipe complete all as specified and directed.

S&F Male Brass threaded Adaptor Tee for special fitting of 25 mm outer bore CPVC pipe complete all as specified and directed.

Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified & directed.

M&L glazed ceramic coloured tiles, (350x450)x7mm / thick as in vertical surfaces like dado or skirting over 10mm thick in CM 1:4 set & joined in neat cement slurry and pointed in coloured cement to match complete all as specified & directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick, joint free (square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm in floors, over and including 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified & directed.

S&F non skid ceramic coloured tiles 7 to 8 mm thick, joint free (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, over and including 15mm thick screed in CM (1:4) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified & directed.

Supply only water proofing compound complete all as specified & directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including PVC 'P' or 'S' trap connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified & directed.

S&F in repair, PVC L/L cistern 10 lir capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket and 450mm long PVc connection pipe etc complete all as specified & directed.

Fixing only in repair, PVC L/L cistern 10 lir capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete all as specified & directed.

S&F in repair Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand and including of fixing of supply and waste pipe and 15mm pillar tap cast copper alloy with capstan head chromium plated complete fixed in repair complete all as specified & directed.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm chromium plated cast copper alloy bib taps fixed in repair complete all as specified & directed.

S&F in repair fancy type chromium plated Angle valves, cast copper alloy with crutch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified & directed.

S&F in repair fancy type chromium plated with long shank and cup (concealed type) stop valves, cast copper aloy with cruitch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brrass ferrule complete all as specified & directed.

S&F in repair brass chromium plated shower rose 125mm size fitted to steel pipe or union complete all as specified & directed.

Dismantling water tanks exceeding 250 and not exceeding 500 litres capacity and removing to store complete all as specified & directed. Note:- Disturbed surface should be make good by 20 mm graded stone PCC )

S&F rotational moulded polyethylene water storage tanks (tripple layer White in colour cylindrical vertical with closed top) of 500 litres capacity, hoisted and fixed in position including connecting up pipes i.e. nipple socket / unions etc fixed in repairs complete all as specified & directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 20mm bore fixed in repairs complete all as specified & directed.

S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball , screwed for iron pipe or brass ferrule 15mm bore fixed in repairs complete all as specified & directed.

S&F Grating round 140 mm size of PTMT with hole or without hole fixed in repair complete all as specified & directed.

S&F Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore fixed in repairs complete all as specified & directed.

S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed for 20mm bore pipe complete all as specified & directed.

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified & directed.

M&L 15mm thick rendering in CM 1:6 to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement complete all as specified & directed.

All as item no 52.00 above but in CM 1:4 .Includind WPC complete all as specified & directed.

M & L two coat of oil bound distemper on new plastered surfaces of walls including preparation of surfaces complete all as specified & directed.

M & L one coat of oil bound distemper on old plastered surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L two coat of cement base paint on new surfaces of walls including preparation of surfaces complete all as specified and directed.

M & L one coat of cement base paint on old surfaces of walls including preparation of surfaces completeall as specified and directed by Engineer - in - Charge .

M&L Salt-glazed stoneware gully traps, size 180mmx150mm square or round mouthed, tvpe 'P' including demolition/disamantling of existing gully trap and remove from site complete all as specified & directed.

Cutting into existing manholes for connecting new drains, making good to pipe , internal dian of pipe is 150mm and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified & directed.

Ditto, items above but for removing existing branch drain, making good to walling and rendering, cutting out branch channel, and making good benchings complete all as specified & directed.

Demolition of brickwork or stone/boulder masonry, built in lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & directed.

M&L for Brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified & directed.

S&F in repair 100mm dia PVC (SWR) vent cowl complete all as specified & directed.

M&L for plain Cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation ,filling and mass concrete complete all as specified & directed.

M&L for Plain Cement concrete type B-1 using 20mm graded stone agregates as in surface channels and drains etc complete all as specified & directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified & directed.

Providing, cement concrete (1:2:4),type B-1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, kerbs or mud stops, rounded or chamfered on edges complete all as specified & directed.

Fixing only in repair old useable 15mm bore bib tap, stop valve, gate valve, pillar tap etc necessary repair work shall be carry out to old fitting before fixing fitting /fixture complete all as specified & directed.

Demolition of RCC in floors (other than ground floors), beams staircases, landing, chajjas, slab and similar suspended work, including removing out of MD Land complete all as specified & directed. Note : Demolition work is to be carried out in portion of building hence necessary scaffolding and safety measurs required to support adjucent portions of bldg are deemed to be included in quoted rates.

M&L RCC M-25 (Design mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia complete all as specified & directed.

Ditto as per item No above but 72.00 to 8mm dia complete all as specified & directed.

M&L form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface.

Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames) complete all as specified & directed.

Providing 30mm thick factory made 100% solid WPC (Wood polymer composite) Solid Plain/Prelam/Enrouted Plain/Enrouted Painted flush Door Shutter of required size comprising of Virgin PVC resin of K Value 57-60 (Suspension Grade), Calcium carbonate and natural fibers (Wood Powders/rice husk/Wheat husk) and Non toxic additives made from Extrusion process WPC foam sheet single Extruded (Inner) with density not less than 650 Kg/cbm manufacture by an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw withdrawl strength of 2000 N (face) & 1100 N (Edge), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread flame of Class A category with Property of being Termite/Borer Free, Water/Moisture Proof, Fire Retardant and fixing with Stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. For WC/Bathroom/Toilet/Kitchen/Balcony Doors complete all as specified & directed.

Providing and Fixing factory made 100% Solid WPC (Wood Polymer Composite)- Door frame of size 75mmx50mm made from wood Polymer Composite (Single Extruded process ) material comprising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium carbonate and Natural Fibers (Wood Powder/Rice Husk/Wheat Husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & Screwed with full body threaded star headed screws having minimum frame density of 780 Kg /cbm manufacture by an ISO 9001-2015 certified Company, having good screw holding capacity (Screw withdrawal strength of (Min 990N), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/Moisture Proof & Fire retardant & Fixed in position with SS Draft Fasteners/Hold Fast of required dia and length for WC/Bathroom/Toilet and external uses complete all as specified & directed.

S&F 150 mm extruded aluminium alloy handles ,fabricated type complete all as specified & directed.

S & F Aluminium anodised barrel tower bolt of extruded section 200mm long complete all as specified & directed.

S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250mm size complete all as specified & directed.

S&F 300mm long mild steel ordinary rat tail rod pattern springs, including roller and roller plate as in repair complete all as specified & directed.

Supply fixing, SS butt hinges 100mm, medium wt complete all as specified & directed.

Demolition and breaking up drain pipes size 150mm internal dia (Salt glazed ware, AC or Reinforced concrete) complete all as specified & directed.

M&L for Concrete bed of PCC 1:4:8 to drain pipes of size 150mm dia including packing under,and haunching against the sides of pipe safter they are laid and tested complete all as specified & directed.

S&F 150mm Reinforced concrete pipes, class NP3, laid and jointed complete with collars complete all as specified & directed.

T/D Steel window with or without glazing bars and ventilator n.exc 1.50 Sqm each.ncl repair of jambs with cement mortar complete all as directed and directed.

T/D Steel window with or without glazing bars and ventilator exc 1.50 Sqm but n.exc 4 sqm each.ncl repair of jambs with cement mortar complete all as directed and directed

S&F Factory made Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified & directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Detail of box window shall be given on drawing no TD/2013/01 Sheet 1/3,2/3,3/3 (iii) Glass pane/ wire gauze shall be measured and paid separately.

Factory made Steel windows/ventilators (Box type), with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded including one shop coat of Zinc chrome primer including making good disturbed surfaces of walls, complete all as specified & directed. Notes:- (i) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chrome primer on steel windows. Nothing shall extra paid on this account. (ii) Detail of box window shall be given on drawing no TD/2013/01 Sheet 1/3,2/3,3/3 (iii) Glass pane/ wire gauze shall be measured and paid separately.

M&L Mild steel round bars as in window guard bars incl necessary welding and a shop coat of Zink Primer, confirming to Fe-310-O or Fe-410-O complete all as specified & directed.

M&L for two coats of synthetic enamel paint on steel Surfaces of any descri-ption, over 10cm in width or girth , not other wise described, including preparation of new surface complete all as specified & directed.

S&F in Repair Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified & directed.

S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as specified & directed.

S&F galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm complete all as specified & directed.

S&F in repair galvanised steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm complete all as specified & directed.

Balaji Construction Co.

m/s krishna engineers1

Siya constructions

Puja Traders

M/s Rao Constructions, 1173 Urban Estate-II, Hisar