WORK OF DISMANTLING OF OLD AND OUTDATED 132 KV DPP AND DOUBLE FEEDER CONTROL PANEL AND ERECTION OF NEW 132 KV DPP AND DOUBLE FEEDER CONTROL PANEL , MAKING OF GUARD STRUCTURE AND OTHER ASSOCIATED WORK AT 132 KV S/S KASIA UNDER ETD-I , GORAKHPUR

Amount

Replacement of old , used and outdated 02 Nos. of DPP of 132 KV Deoria and 132 KV NISM and 01 No. double feeder control & relay panel of 132 KV Motiram Adda and Rajapakar at 132 KV S/s Kasia.

Dismantling of old and out dated 02 Nos. of 132 KV DPP and 02 Nos. of 132 KV Double Feeder Control panel of 132 KV Deoria , 132 KV NISM and 132 KV Motiram Adda and Rajapakar after dismantling of 4Cx2.5 Sq. mm for CT/PT/CB cables , 2Cx2.5 mm Sq. for DC/AC cables and 6/10C x 2.5 mm Sq. CB cables with due identification and isolation of 110Volt DC/22 Volt AC and cutting of earthing with all cost of men , T&P etc. required for the completion of work.

Erection of new 02 Nos. DPP at 132 KV Deoria and 132 KV NISM and 01 No. Double Feeder Control Panel at 132 KV Motiram Adda and Rajapakar bay after shifting of panel (Approx. 80 meter) from store site to the work site with the help of labour , earthing of panel by 25x5/50x6 Sq. mm MS Flat for each panel and painting it by green enamel paint , laying and reqouting of different size of control cable (2C/4C/6C/10Cx2.5 Sq. mm) if required and then termination of old and new laid cable in newly erected 132 KV DPP and Double Feeder Control Panel , PT JB , CT JB and CB after cabling , tracing the each core of cable including making necessary holes in glands plate or box where ever required , supply of cable glands of appropriate size, supply and fixing of ferrules for each core as required for termination with proper dressing and all other associated work to complete the job satisfactorily.

Making guard structure having height 12 feet and 04 Nos. (60x60x5 mm ) and 04 Nos. horizontal spacer angle size (45x45x5 mm) 12 feet long on face side including all cost of cutting , making hole for nut , bolt with washer etc. against 40 MVA T/F (M.S. Angle will be provided by the department free of cost).

Grouting of 04 Nos. 12 feet long angle guard structure support with bricks , concrete and cement ratio 1:2:4 size 30x30x30 mm.

Fixing of welding of M.S. Ground bar size of 6" gap in to length 12' x 12' full length guarding purpose (M.S. Round bar of 5 mm size arranged by the contractor).

Providing and fixing of wire mesh (144 Sq. feet) size 12' x12' in vertical respectively including all associated work under supervision of site engineer.

Making 2 point diognal earthing with MS Flat 50x6 mm of guard structure and connecting with main earth mat including all associated works / cost of MS Flat will be arranged by the contractor at his own cost.

Providing , Fixing and mounting of 33 KV Post Insulator (06 Nos.) with 33 KV Post top clamp for twin moose conductor (03 Nos.) on top of the guard structure by making hole of appropriate size in the MS Angle for separation and supporting the conductor connected between 40 MVA T/F LV bushing and its 33 KV CT ( 800-400/1Amp.) including the cost of replacement of damaged conductor and also cost of men , T&P etc.

Safe carriage of 2C/4C/6C/10C x2.5 Sq.mm control cable from 132 KV S/s Laxmipur , Rajapakar or 220 KV S/s Hata to 132 KV S/s Kasia by private vehicle including the cost of shifting , loading , unloading and also the cost of men , hydra , T&P etc.

Dismantling of old, used and 1st layer insulation damage of 2C/4C/6C/10C x2.5 Sq. mm control cable from C&R panels , CB & CT Junction box from 05 Nos. of different 33 KV feeder bays situated at 132 KV S/s Kasia with due to identification and isolation of control cable including the cost of men , T&P , consumables etc. required for work.

Opening of cable trenches and laying of following size of control cable from different 33 KV feeder C&R panel to CB, CT Junction Box etc. with all cost of men , T&P etc.

2C x 2.5 Sq. mm Control cable.

4C x 2.5 Sq. mm Control cable.

6C x 2.5 Sq. mm Control cable.

10 C x 2.5 Sq. mm Control cable.

Termination of above laid cables at CT , CB , C&R panel end after proper glanding , ferrules with all cost of men , T&P consumables.

Extraction of various size (2/4/6/10 C x 2.5 Sq. mm) of useless / defective PVC copper control cable from different bays (132/33 KV ) then after rolling the cable from one end for making the bunch , shifting of these bunch from work site to store with all other associated work including the cost of men , T&P etc.

ARK ENGINEERING

Sampada Trading Company